Aproveitamento de resíduos minerais na formulação de argamassas para a construção civil

Current environmental concerns include the excessive consumption and inefficient use of non-renewable natural resources. The construction industry is considered one of the largest consumers of natural raw materials, significantly contributing to the environmental degradation of the planet. The use of calcareous quarry (RPPC) and porcelain tile polishing residues (RPP) as partial replacements of the cement in mortars is an interesting alternative to minimize the exploration of considerably large amounts of natural resources. The present study aimed at investigating the properties of fresh and hardened mortars produced using residues to replace cement. The residues used were fully characterized to determine their specific mass, unitary mass, particle size distribution and morphology, and composition. The performance of the mortars was compared to that of reference compositions, prepared without residues. A total of 18 compositions were prepared, 16 using residues and 2 reference ones. The mortars were prepared using Portland CP II F 32 cement, CH I hydrated lime, river sand and tap water. The compositions of the mortars were 1:1:6 and 1:0.5:4.5 (vol%), and water to cement ratios of 1.87 and 1.45 were used, respectively. The mortars in the fresh state were evaluated by consistency index, water retention, density of mass and incorporated air content tests. In their hardened state, the mortars were evaluated by apparent mass density, modulus of elasticity, flexural tensile strength, compressive strength and water absorption by capillarity. The mortars were also analyzed by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and fluorescence. Finally, they were classified according to NBR 13281 standards. The mortars prepared using residues partially replacing the cement exhibited lower modulus of elasticity compared to the reference compositions, thus improving the performance in their intended use. On the downside, the water absorption by capillarity was affected by the presence of residues and both the tensile and compressive strength were reduced. However, from the overall standpoint, the replacement of cement by calcareous quarry or porcelain tile polishing residues did not result in significant changes in the properties of the mortars. Therefore, compositions containing these residues can be used in the construction industry

Síntese enzimática de ésteres de açúcar: surfactantes e polímeros como novos materiais ambientalmente seguros

Sugar esters are substances which possess surfactant, antifungical and bactericidal actions and can be obtained through two renewable sources of raw materials: sugars and vegetable oils. Their excellent biodegradability, allied to lhe fact that they are non toxic, insipid, inodorous, biocompatible, no-ionic, digestible and because they can resist to adverse conditions of temperature, pH and salinity, explain lhe crescent use of these substances in several sections of lhe industry. The objective of this thesis was to synthesize and characterize surfactants and polymers containing sugar branched in their structures, through enzymatic transesterification of vinyl esters and sugars, using alkaline protease from Bacillus subtilis as catalyst, in organic medium (DMF).Three types of sugars were used: L-arabinose, D-glucose and sucrose and two types of vinyl esters: vinyl laurate and vinyl adipate. Aiming to reach high conversions from substrates to products for a possible future large scale industrial production, a serie of variables was optimized, through Design of Experiments (DOE), using Response Surface Methodology (RSM).The investigated variables were: (1) enzyme concentration; (2) molar reason of substrates; (3) water/solvent rale; (4) temperature and (5) time. We obtained six distinct sugar esters: 5-0-lauroyl L-arabinose, 6-0-lauroyl D-glucose, 1'-O-lauroyl sucrose, 5-0-vinyladipoyl L-arabinose, 6-0-vinyladipoyl D-glucose and 1 '-O-vinyladipoyl sucrose, being lhe last three polymerizable. The progress of lhe reaction was monitored by HPLC analysis, through lhe decrease of sugar concentration in comparison to lhe blank. Qualitative analysis by TLC confirmed lhe formation of lhe products. In lhe purification step, two methodologies were adopted: (1) chromatographic column and (2) extraction with hot acetone. The acylation position and lhe chemical structure were determined by 13C-RMN. The polymerization of lhe three vinyl sugar esters was possible, through chemical catalysis, using H2O2 and K2S2O8 as initiators, at 60°C, for 24 hours. IR spectra of lhe monomers and respective polymers were compared revealing lhe disappearance of lhe vinyl group in lhe polymer spectra. The molar weights of lhe polymers were determined by GPC and presented lhe following results: poly (5-0-vinyladipoyl L-arabinose): Mw = 7.2 X 104; PD = 2.48; poly (6-0-vinyladipoyl D-glucose): Mw = 2.7 X 103; PD = 1.75 and poly (1'-O-vinyladipoyl sucrose): Mw = 4.2 X 104; PD = 6.57. The six sugar esters were submitted to superficial tension tests for determination of the critical micelle concentrations (CMC), which varied from 122 to 167 ppm. Finally, a study of applicability of these sugar esters, as lubricants for completion fluids of petroleum wells was' accomplished through comparative analysis of lhe efficiency of these sugar esters, in relation to three commercial lubricants. The products synthesized in this thesis presented equivalent or superior action to lhe tested commercial products

Cinemática de partículas em fluidos de viscosidade variável com o tempo e sua aplicação na construção de poços de petróleo: avaliação durante paradas operacionais

The new oil reservoirs discoveries in onshore and ultra deep water offshore fields and complex trajectories require the optimization of procedures to reduce the stops operation during the well drilling, especially because the platforms and equipment high cost, and risks which are inherent to the operation. Among the most important aspects stands out the drilling fluids project and their behavior against different situations that may occur during the process. By means of sedimentation experiments, a correlation has been validated to determe the sedimentation particles velocity in variable viscosity fluids over time, applying the correction due to effective viscosity that is a shear rate and time function. The viscosity evolution over time was obtained by carrying out rheologic tests using a fixed shear rate, small enough to not interfere in the fluid gelling process. With the sedimentation particles velocity and the fluid viscosity over time equations an iterative procedure was proposed to determine the particles displacement over time. These equations were implemented in a case study to simulate the cuttings sedimentation generated in the oil well drilling during stops operation, especially in the connections and tripping, allowing the drilling fluid project in order to maintain the cuttings in suspension, avoiding risks, such as stuck pipe and in more drastic conditions, the loss of the well

Estudo paramétrico da recuperação de óleo no processo de drenagem gravitacional com injeção de CO2

The gas injection has become the most important IOR process in the United States. Furthermore, the year 2006 marks the first time the gas injection IOR production has surpassed that of steam injection. In Brazil, the installation of a petrochemical complex in the Northeast of Brazil (Bahia State) offers opportunities for the injection of gases in the fields located in the Recôncavo Basin. Field-scale gas injection applications have almost always been associated with design and operational difficulties. The mobility ratio, which controls the volumetric sweep, between the injected gas and displaced oil bank in gas processes, is typically unfavorable due to the relatively low viscosity of the injected gas. Furthermore, the difference between their densities results in severe gravity segregation of fluids in the reservoirs, consequently leading to poor control in the volumetric sweep. Nowadays, from the above applications of gas injection, the WAG process is most popular. However, in attempting to solve the mobility problems, the WAG process gives rise to other problems associated with increased water saturation in the reservoir including diminished gas injectivity and increased competition to the flow of oil. The low field performance of WAG floods with oil recoveries in the range of 5-10% is a clear indication of these problems. In order to find na effective alternative to WAG, the Gas Assisted Gravity Drainage (GAGD) was developed. This process is designed to take advantage of gravity force to allow vertical segregation between the injected CO2 and reservoir crude oil due to their density difference. This process consists of placing horizontal producers near the bottom of the pay zone and injecting gás through existing vertical wells in field. Homogeneous models were used in this work which can be extrapolated to commercial application for fields located in the Northeast of Brazil. The simulations were performed in a CMG simulator, the STARS 2007.11, where some parameters and their interactions were analyzed. The results have shown that the CO2 injection in GAGD process increased significantly the rate and the final recovery of oil

Metodologia para avaliação de cinemática de partículas gasosas em fluidos de viscosidade variável com o tempo e sua aplicação na construção de poços de petróleo

Many challenges have been presented in petroleum industry. One of them is the preventing of fluids influx during drilling and cementing. Gas migration can occur as result of pressure imbalance inside the well when well pressure becomes lower than gas zone pressure and in cementing operation this occurs during cement slurry transition period (solid to fluid). In this work it was developed a methodology to evaluate gas migration during drilling and cementing operations. It was considered gel strength concept and through experimental tests determined gas migration initial time. A mechanistic model was developed to obtain equation that evaluates bubble displacement through the fluid while it gels. Being a time-dependant behavior, dynamic rheological measurements were made to evaluate viscosity along the time. For drilling fluids analyzed it was verified that it is desirable fast and non-progressive gelation in order to reduce gas migration without affect operational window (difference between pore and fracture pressure). For cement slurries analyzed, the most appropriate is that remains fluid for more time below critical gel strength, maintaining hydrostatic pressure above gas zone pressure, and after that gels quickly, reducing gas migration. The model developed simulates previously operational conditions and allow changes in operational and fluids design to obtain a safer condition for well construction

Prevalência e fatores associados da síndrome de Osgood-Schlatter em uma amostra populacional de adolescentes brasileiros

Osgood-Schlatter (O-S) syndrome, a pathology of the musculoskeletal system, exhibits high incidence in adolescence, a phase of accelerated bone growth. Detection of physiopathological mechanisms that may cause disorders and dysfunctions in bone growth must be taken into account when planning physical activities, in order to promote normal physiological growth patterns. The aim of this epidemiological investigation was to identify and analyze the relationships between sociodemographic, anthropometric and clinical aspects and O-S. A cross-sectional design was used, with a representative sample of 956 subjects: 474 (49.6%) males and 482 (50.4%) females. Age range varied between 12 and 15 years (mean = 13.7±1.04). We used a battery of tests, previously applied in a pilot study, which met the aims of the investigation. Descriptive statistics (frequency, mean and standard deviation) were used and the odds ratio was calculated from bivariate and multivariate logistic regression (p<0.05). A prevalence of 9.8% was found (n = 94 cases): 11% males and 8.3% females. Hierarchized multivariate analysis showed a significant association between regular physical activities (OR= 1.94; CI 95%, 1.22-3.10) and shortening of the rectus femoris muscle (OR= 7.15; CI 95%, 2.86-17.86). The results may serve as a basis for therapeutic and prophylactic measures, in addition to increasing our knowledge of this syndrome in Brazilian adolescents. This investigation used a multidisciplinary approach, involving elements of anatomy, nutrition, physical education and physical therapy to elucidate the object under study related to Osgood-Schlatter syndrome

Ovário-histerectomia vídeo-assistida com único portal em cadelas: estudo retrospectivo de 20 casos

O objetivo do presente estudo foi avaliar retrospectivamente as 20 primeiras ovário-histerectomias vídeo-assistidas com único portal (SPVA-OSH), realizadas por um cirurgião não proficiente nessa técnica. Vinte cadelas foram submetidas à laparoscopia para SPVA-OSH, com o auxílio de um endoscópio de 10mm, com canal de trabalho de 5mm, inserido por um trocarte, posicionado na região pré-púbica, e coagulação bipolar. O tempo cirúrgico médio foi de 22,95±5,17 minutos. Os cinco primeiros procedimentos consumiram mais tempo cirúrgico do que os demais. A abordagem aos pedículos ovarianos direito e esquerdo foram as etapas que apresentaram maior tempo de execução. Houve complicação leve ou moderada em seis (30%) das 20 cadelas operadas. As complicações foram: hemorragia leve ou moderada em um dos pedículos ovarianos em quatro (20%) cadelas e hemorragia grave, devido à punção do baço com agulha de Veress em dois (10%) animais. A SPVA-OSH foi realizada em cadelas por um cirurgião no início da curva de aprendizado, sem complicações maiores.

Efeito de diferentes períodos de irrigação no desenvolvimento, produção e qualidade de sementes na cultura do milho (Zea mays L.)

O presente trabalho foi realizado em área demonstrativa de irrigação do Departamento de Engenharia Rural da Faculdade de Ciências Agrárias e Veterinárias, da Universidade Estadual Paulista (FCAV/UNESP), Jaboticabal - SP, tendo como objetivo avaliar os efeitos da deficiência hídrica no desenvolvimento da planta, na produção e na qualidade fisiológica de sementes da cultura do milho (Zea mays L.). O delineamento experimental foi o inteiramente casualizado, com os tratamentos em esquema fatorial 2 x 3, com quatro repetições. Os tratamentos consistiram da utilização de sementes de milho híbrido BR201 e DINA-70, com três períodos de irrigação: 1) durante todo o ciclo; 2) após o período vegetativo (após a emissão da 12ª folha), e 3) até 20 dias após o florescimento (antes do período de enchimento dos grãos). Concluiu-se que a deficiência hídrica durante o período vegetativo (irrigação após a emissão da 12ª folha) foi a mais prejudicial à cultura e à produção; essa deficiência hídrica não afetou a qualidade fisiológica das sementes produzidas, e o híbrido DINA-70 apresentou melhores resultados para os parâmetros fisiológicos e de produção que o híbrido BR201.

O púlpito como cátedra: retórica e educação nos sermões do Pe. Antônio Vieira (1608-1697)

This work aims to analyze the relationship among culture, education and rhetoric on the sermons of the Priest Antonio Vieira (1608-1697). It discusses the presence of oratory on the Western teaching since its Greek origins until the formation of the Ratio Studiorum in 17th-century. Brazilian society is defined as baroque and the rhetoric arises as element essential in the elaboration of the social imaginary speeches and, occupying as an essencial element in the elaboration of discursese and social imaginaries, occupying the centre of controversies, about questions like reason and the faith, ethics and the politics, the nature of the Indian and African peoples, even over the own construction of the modern subject. In this context the vieira´s preaching discharges the functions of kerigma (preaching), didachê (education) and politics (action). The research consisted in a finicky reading over five of these sermons that were returned in the presence of different audiences. The pulpit was the cathedra where Vieira used his sermons as a manner of social mobilization that aimed not only teaching a determined knowledge of reality, but altering cruel situations like Indian and poor people slavery in his epoch. Education by Vieira consist in a tension between utopian hopes and urgencies of practice. The rhetorical tradition affirms the interdependence of technical ethics and politics aspects. To know is not enough is necessary to convince and to move, realizating passage from theorical to practical liverly. It presupposes still the preoccupation with the solidity of argumentation and of reasoning, a wide cultural formation, the requirement of a civic ethics and, mainly, the adequacy between content and the specifics of audience

Objetos de aprendizagem e alfabetização: a proposição de um encontro

This study investigates the development of Learning Objects for the literacy of children. It aims to know based in the notion of literacy teachers the main factors of academic failure in literacy and researching in Brazil, as well as identify relevant activities in the literacy process of children to support the creation of a set of Learning Objects. Refers to an exploratory research, which is configured as a qualitative nature case study, inspired in part in an action-research described by Thiollent (2003), conducted with ten early grades elementary school teachers of a public municipal school in Parnamirim / RN. As methodological options for data collection uses questionnaires and focuses on the group of teachers, analyzing the data, referring back to the ideas by Szymanski (2001; 2008) and content analysis, guided by Bardin (2002). The development of Learning Objects, follows the steps of development suggested by Garrett (2000). Rules in its multidisciplinary theoretical reference and promotes a conceptual dialogue on: Literacy; Literacy School Failure; Pedagogical Practice in Literacy; Thoughts and Language; Multimedia and Hypermedia; Learning Objects. Perceives that the act of education in literacy as an act of love, courage and social interaction between individuals - educator and pupil, so there is ownership of the object of knowledge in the relations with the world and with the experience, through a pedagogical practice that assumes all different knowledges, the moral political ideal, the mindsets of the students, and can make use of teaching materials that supports the learning process and are consistent with the educational objectives (FREIRE, 1998; FREINET, 1976; VYGOTSKY, 1998; FERREIRO AND TEBEROSKY, 1985; JONASSEN, 2000; WILEY, 2001). Figures out, through the teachers' opinions, five reasons for school failure in literacy, three inside the school environment: teacher; academic assistant and principal; student, and two outside the school environment: parents/family; government and public management. Presents a set of Learning Objects, based on the constructivist thought, developed from the identification of activities considered relevant by teachers in literacy's teaching and learning process. Suggests the use of Learning Objects as pedagogical practice in literacy as a digital resource that supports learning and can trigger important cognitive processes for the acquisition of reading and writing skills in the school environment

Natural Host Relationships and Genetic Diversity of Rodent-Associated Hantaviruses in Southeastern Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação de um programa de educação ambiental não formal: a Caravana Ecológica na visão dos participantes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Evidence for Reductive Genome Evolution and Lateral Acquisition of Virulence Functions in Two Corynebacterium pseudotuberculosis Strains

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Bagaço de cana-de-açúcar tratado com hidróxido de sódio

O experimento foi conduzido com o objetivo de avaliar a composição química e a digestibilidade in vitro da matéria seca (MS) do bagaço de cana-de-açúcar contendo 60% de MS submetido a doses crescentes de hidróxido de sódio (NaOH) (0; 2,5; 5 e 7,5% de uma solução 2:1 de água:NaOH na MS) em diferentes períodos de tratamento (1, 3, 5 e 7 dias). Foram utilizados baldes plásticos com capacidade de 10 L, mantidos em uma câmara climática à temperatura constante de 25ºC. Não foi verificado efeito dos tratamentos (dose de NaOH e dias de tratamento) sobre os teores de PB, que apresentaram valor médio de 1,6%. A MS aumentou com os dias de tratamento, não sendo observadas alterações para essa variável em relação às doses crescentes de NaOH. Foi observada redução das frações de FDN, FDA, celulose (CEL), hemicelulose (HEM) e lignina (LIG). A digestibilidade in vitro da matéria seca (DIVMS) e o teor de sódio aumentaram quando o bagaço de cana foi submetido a doses crescentes de NaOH, mas não foi observado efeito do período de tratamento sobre essas variáveis. O valor nutritivo do bagaço de cana é melhorado com a adição de NaOH, comprovado pela redução nos constituintes da parede celular e pelo aumento na DIVMS.

Degradabilidade ruminal da matéria seca, da proteína bruta e da fração fibrosa de silagens de milho, de sorgo e de Brachiaria brizantha

Avaliou-se a degradação da matéria seca (MS), da proteína bruta (PB), da fibra em detergente neutro (FDN), da fibra em detergente ácido (FDA) e da hemicelulose das silagens de milho, de sorgo e de Brachiaria brizantha. Foram utilizados três novilhos Nelore, machos, fistulados no rúmen, com média de peso de 200kg. em cada animal foram incubadas amostras das três silagens nos tempos de 0, 6, 12, 24, 36, 48, 72 e 96 horas. Para as degradabilidades potencial e efetiva da MS (taxa de passagem no rúmen de 5%/h), a silagem de milho foi a que apresentou valores mais altos, 80,1 e 56,7%, respectivamente, seguida da silagem de sorgo, 73,0 e 45,3%, e da silagem de Brachiaria, 60,8 e 33,7%. Para a PB, o maior valor de degradabilidade foi verificado para a silagem de milho, 87,0%, seguida das silagens de sorgo, 81,8%, e de Brachiaria, 75,2%. A degradabilidade da FDN foi maior para as silagens de milho e sorgo. Para FDA, a silagem de sorgo apresentou perfil de degradação menor que a silagem de milho. Os resultados sugerem melhor qualidade da silagem de milho, seguida pela do sorgo e pela de Brachiaria.