864 resultados para Very Low Birth Weight
Resumo:
Background:Research examining the relationship between adiponectin (AN) isoforms, body weight and cardiovascular (CV) risk factors is limited, particularly in younger populations. Objectives:To investigate the inter-relationships between AN isoforms and CV risk factors, and their dependence on body weight status, in adolescents. Design:Blood samples from 92 obese, 92 overweight and 92 normal weight age- and sex-matched adolescents were analysed for traditional cardiovascular disease (CVD) risk biomarkers and also total, high molecular weight (HMW), medium and low molecular weight (LMW) AN. Results:A significant inverse association was observed between total and HMW AN and waist-hip ratio (P=0.015, P=0.006, respectively), triglycerides (P=0.003, P=0.003, respectively) and systolic blood pressure (P=0.012, P=0.024, respectively) and a significant positive association with high-density lipoprotein (P<0.001, P<0.001, respectively) in multi-adjusted analyses. There was no evidence of a relationship between multimeric AN and high-sensitivity C-reactive protein. There was also little evidence of a relationship between LMW AN and CVD risk factors. There was a strong, body mass index (BMI)-independent, association between AN, CVD biomarkers and the hypertriglyceridemic waist phenotype. Conclusion:Prominent, BMI-independent associations between total and HMW AN, but not LMW AN, and CVD risk factors were already evident in this young population. This research in adolescents supports the contention that AN subfractions may have different biological actions. These associations in apparently healthy adolescents suggest an important role for AN and its subfractions in the pathogenesis of metabolic syndrome traits and indicate that the potential for total or HMW AN to act as early universal biomarkers of CV risk warrants further study.
Resumo:
Since 1989, a red kite Milvus milvus reintroduction programme has been underway in the United Kingdom, with 4-6 week old nestlings brought into captivity and held for 6-8 weeks before reintroduction. As scavengers, red kites may consume unretrieved game, and ingest shot or lead (Pb) fragments in their prey's flesh. We evaluated exposure to Pb in captive and wild red kites by taking blood samples from 125 captive young red kites prior to release, through analysing 264 pellets (regurgitated by wild birds) collected from under a roost site, and analysing Pb concentrations in livers and/or bones of 87 red kites found dead between 1995 and 2003. Lead isotope analyses of livers were also conducted in an effort to identify Pb exposure routes. Forty-six (36.8%) kites sampled prior to release had elevated blood Pb concentrations (201-3340 microg l(-1)). The source of this Pb was probably small fragments of lead ammunition in the carcasses of birds or mammals either fed to the nestlings by their parents or, more likely, subsequently whilst in captivity. Once released, kites were also exposed to lead shot in their food, and a minimum of 1.5-2.3% of regurgitated pellets contained Pb gunshot. Seven of 44 red kites found dead or that were captured sick and died within a few days had elevated (>6 mg kg(-1) dry weight [d.w.]) liver Pb concentrations, and six of these (14%) had concentrations of >15 mg kg(-1) d.w., compatible with fatal Pb poisoning. Post-mortem analyses indicated that two of these birds had died of other causes (poisoning by rodenticide and a banned agricultural pesticide); the remaining four (9%) probably died of Pb poisoning. Bone samples from 86 red kites showed a skewed distribution of Pb concentration, and 18 samples (21%) had Pb concentrations >20 mg kg(-1) d.w., indicating elevated exposure to Pb at some stage in the birds' life. Lead isotopic signatures (Pb (208/206); Pb (206/207)) in liver samples of the majority of kites were compatible with those found in lead shot extracted from regurgitated pellets. Lead isotope ratios found in the livers of kites with very low Pb concentrations were distinct from UK petrol Pb isotopic signatures, indicating that birds were exposed to little residual petrol Pb. We conclude that the primary source of Pb to which red kites are exposed is lead ammunition (shotgun pellets or rifle bullets), or fragments thereof, in their food sources; in some cases exposure appears sufficient to be fatal. We make recommendations to reduce Pb poisoning in both captive and wild red kites and other scavenging species.
Resumo:
In this study, the changes in some of the cellular components of the immune system and the activity of the cytokine interleukin 2, important for immune activation and lymphocyte proliferation, were measured in a large cross-sectional study of all age groups including octogenarian and nonagenarian subjects. In 206 apparently well community-living subjects, the absolute lymphocyte count and T and B cell numbers fell a little in old and very old subjects. Within the T cell compartment, helper/inducer CD4+ T cells, together with their subsets identified as 'naive' (CD4+/CD45RA+) and 'memory' (CD4+/CD45RO+) cells, also showed a decline with increased age. The suppressor/cytotoxic CD8+ subset showed no age-related change. The levels of the cytokine interleukin 2 were very low in octogenarian and nonagenarian subjects, while the soluble interleukin 2 receptor levels increased with increasing age. The interleukin 2 levels were associated with number and percentage of the 'memory' (CD4+/CD45RO+) subset of T cells which mediates the host response to previously met antigens. Since the interleukin 2 values were very low in the oldest groups and were associated with a reduced 'memory' (CD4+/CD45RO+) compartment, this suggests a possible mechanism of why the very elderly subject is more susceptible to morbidity and mortality from infectious or other agents.
Resumo:
Aim: Intrauterine, early life and maternal exposures may have important consequences for cancer development in later life. The aim of this study was to examine perinatal and birth characteristics with respect to Cutaneous malignant melanoma (CMM) risk. Methods: The Northern Ireland Child Health System database was used to examine gestational age adjusted birth weight, infant feeding practices, parental age and socioeconomic factors at birth in relation to CMM risk amongst 447,663 infants delivered between January 1971 and December 1986. Follow-up of histologically verified CMM cases was undertaken from the beginning of 1993 to 31st December 2007. Multivariable adjusted unconditional logistic regression was used to calculate odds ratios (OR) and 95% confidence intervals (CI) of CMM risk. Results: A total of 276 CMM cases and 440,336 controls contributed to the final analysis. In reference to normal (gestational age-adjusted) weight babies, those heaviest at birth were twice as likely to develop CMM OR 2.4 (95% CI 1.1-5.1). Inverse associations with CMM risk were observed with younger (
Resumo:
Slower postnatal growth is an important predictor of adverse neurodevelopmental outcomes in infants born preterm. However, the relationship between postnatal growth and cortical development remains largely unknown. Therefore, we examined the association between neonatal growth and diffusion tensor imaging measures of microstructural cortical development in infants born very preterm. Participants were 95 neonates born between 24 and 32 weeks gestational age studied twice with diffusion tensor imaging: scan 1 at a median of 32.1 weeks (interquartile range, 30.4 to 33.6) and scan 2 at a median of 40.3 weeks (interquartile range, 38.7 to 42.7). Fractional anisotropy and eigenvalues were recorded from 15 anatomically defined cortical regions. Weight, head circumference, and length were recorded at birth and at the time of each scan. Growth between scans was examined in relation to diffusion tensor imaging measures at scans 1 and 2, accounting for gestational age, birth weight, sex, postmenstrual age, known brain injury (white matter injury, intraventricular hemorrhage, and cerebellar hemorrhage), and neonatal illness (patent ductus arteriosus, days intubated, infection, and necrotizing enterocolitis). Impaired weight, length, and head growth were associated with delayed microstructural development of the cortical gray matter (fractional anisotropy: P <0.001), but not white matter (fractional anisotropy: P = 0.529), after accounting for prenatal growth, neonatal illness, and brain injury. Avoiding growth impairment during neonatal care may allow cortical development to proceed optimally and, ultimately, may provide an opportunity to reduce neurological disabilities related to preterm birth.
Resumo:
The aims of this study were to examine preterm infant reactions to pain in detail over prolonged time periods using multiple measures, and to assess the value of including specific body movements of the Neonatal Individualized Developmental Care and Assessment Program (NIDCAP) system to evaluate pain. Ten preterm infants born at 31 weeks mean gestational age (GA) and mean birth weight 1676 g were studied during a routine blood collection in a Level III neonatal intensive care unit (NICU). At 32-week post-conceptional age, computerized physiologic and video recordings were obtained continuously for 60 min (prior to, during and after lance). Motor and facial behaviors were coded independently, using the NIDCAP and the NFCS (Neonatal Facial Coding System), respectively, and compared with heart rate (HR) and oxygen saturation responses. Of the movements hypothesized to be stress cues in the NIDCAP model, extension of arms and legs (80%) and finger splay (70%) were the most common following lance. Contrary to the model, most infants (70%) had lower incidence of twitches and startles post-lance compared to baseline. Whereas all infants showed some NFCS response to lance, for three infants, the magnitude was low. HR increased and oxygen saturation decreased post-lance. Infants with more prior pain exposure, lower Apgar, and lower GA at birth, displayed more motor stress cues but less facial activity post-lance. Extension of extremities and finger splay, but not twitches and startles, from the NIDCAP, appear to be stress cues and show promise as clinical pain indicators to supplement facial and physiological pain measures in preterm infants.
Resumo:
Snake venom constitutes one of the most complex mixtures of naturally-occurring toxic proteins/polypeptides and a large number of these possess very profound biological activities. Disintegrins, that are commonly found in viper venoms, are low molecular weight proteins that usually contain an -Arg-Gly-Asp- (-RGD-) motif that is known to be involved in cell adhesion ligand recognition, binding specifically to cell surface integrin receptors and also exhibiting platelet anti-aggregation activity.
Here, we report for the first time, the successful cloning of three cDNAs encoding disintegrin precursors from lyophilised venom-derived libraries of Atheris chlorechis, Atheris nitschei and Atheris squamigera, respectively. All of these disintegrins belong to the short-coding class and all exhibit high degrees of structural identity, both in their amino acid sequences and in the arrangement of their functional domains. Mass spectrometric analyses of the HPLC-separated/in-gel digested venom proteins was performed to characterise the mature disintegrins as expressed in the venom proteome. Studies on both the structures and conserved sites within these disintegrins are of considerable theoretical interest in the field of biological evolution and in the development of new research tools or novel templates for drug design.
Resumo:
A six-year prospective study of 144 newly diagnosed, symptomatic diabetic patients aged 40-69 years showed that 21 (15%) required insulin therapy, commencing 1-61 months after diagnosis. The plasma insulin response to oral glucose was assessed at the time of diagnosis. All 12 patients with very low peak insulin response (less than or equal to 6 mU/l) required insulin therapy. Thirty-six patients had an intermediate insulin response (greater than 6 less than or equal to 18 mU/l); of these, 7 with a mean weight 88% (range 73-96%) of average body weight required insulin, while 29 with a mean weight 117% (range 98-158%) of average body weight, did not. Ninety-six patients had a peak insulin response (greater than 18 mU/l); 2 patients whose weights were 96% and 100% of average body weight, required insulin, while the remainder did not. Consideration of initial body weight and peak insulin response provides a useful prediction of the eventual need for insulin.
Resumo:
A procedure was developed to extract polyols and trehalose (protectants against stress) from fungal conidia. Conidia were sonicated (120 s) and immersed in a boiling water bath (5.5 min) to optimize extraction of polyols and trehalose, respectively. A rapid method was developed to separate and detect low-molecular-weight polyols and trehalose using high-performance liquid chromatography (HPLC). An ion exchange column designed for standard carbohydrate analysis was used in preference to one designed for sugar alcohol separation. This resulted in rapid elution (less than 5 min), without sacrificing peak resolution. The use of a pulsed electrochemical detector (gold electrode) resulted in limits of reliable quantification as low as 1.6 μg ml-1 for polyols and 2.8 μg ml-1 for trehalose. This is very sensitive and rapid method by which these protectants can be analysed. It avoids polyol derivatization that characterizes analysis by gas chromatography and the long run times (up to 45 min) that typify HPLC analysis using sugar alcohol columns.
Resumo:
Pseudomonas aeruginosa is an important cause of pulmonary infection in cystic fibrosis (CF). Its correct identification ensures effective patient management and infection control strategies. However, little is known about how often CF sputum isolates are falsely identified as P. aeruginosa. We used P. aeruginosa-specific duplex real-time PCR assays to determine if 2,267 P. aeruginosa sputum isolates from 561 CF patients were correctly identified by 17 Australian clinical microbiology laboratories. Misidentified isolates underwent further phenotypic tests, amplified rRNA gene restriction analysis, and partial 16S rRNA gene sequence analysis. Participating laboratories were surveyed on how they identified P. aeruginosa from CF sputum. Overall, 2,214 (97.7%) isolates from 531 (94.7%) CF patients were correctly identified as P. aeruginosa. Further testing with the API 20NE kit correctly identified only 34 (59%) of the misidentified isolates. Twelve (40%) patients had previously grown the misidentified species in their sputum. Achromobacter xylosoxidans (n = 21), Stenotrophomonas maltophilia (n = 15), and Inquilinus limosus (n = 4) were the species most commonly misidentified as P. aeruginosa. Overall, there were very low rates of P. aeruginosa misidentification among isolates from a broad cross section of Australian CF patients. Additional improvements are possible by undertaking a culture history review, noting colonial morphology, and performing stringent oxidase, DNase, and colistin susceptibility testing for all presumptive P. aeruginosa isolates. Isolates exhibiting atypical phenotypic features should be evaluated further by additional phenotypic or genotypic identification techniques.
Resumo:
Using low-energy electron-diffraction (LEED) formalism, we demonstrate theoretically that LEED I-V spectra are characterized mainly by short-range order. We also show experimentally that diffuse LEED (DLEED) I-V spectra can be accurately measured from a disordered system using a video-LEED system even at very low coverage. These spectra demonstrate that experimental DLEED I-V spectra from disordered systems may be used to determine local structures. As an example, it is shown that experimental DLEED I-V spectra from K/Co {1010BAR} at potassium coverages of 0.07, 0.1, and 0.13 monolayer closely resemble calculated and experimental LEED I-V spectra for a well-ordered Co{1010BAR}-c(2X2)-K superstructure, leading to the conclusion that at low coverages, potassium atoms are located in the fourfold-hollow sites and that there is no large bond-length change with coverage.
Resumo:
Aim: To evaluate and summarize the current evidence on the effectiveness of complementary and alternative medicine for the management of low back pain and/or pelvic pain in pregnancy.
Background: International research demonstrates that 25-30% of women use complementary and alternative medicine to manage low back and pelvic pain in pregnancy without robust evidence demonstrating its effectiveness.
Design: A systematic review of randomized controlled trials to determine the effectiveness of complementary and alternative medicine for low back and/or pelvic pain in pregnancy.
Data Sources: Cochrane library (1898-2013), PubMed (1996-2013), MEDLINE (1946-2013), AMED (1985-2013), Embase (1974-2013), Cinahl (1937-2013), Index to Thesis (1716-2013) and Ethos (1914-2013).
Review Methods: Selected studies were written in English, randomized controlled trials, a group 1 or 2 therapy and reported pain reduction as an outcome measure. Study quality was reviewed using Risk of Bias and evidence strength the Cochrane Grading of Recommendations and Development Evaluation Tool.
Results: Eight studies were selected for full review. Two acupuncture studies with low risk of bias showed both clinically important changes and statistically significant results. There was evidence of effectiveness for osteopathy and chiropractic. However, osteopathy and chiropractic studies scored high for risk of bias. Strength of the evidence across studies was very low.
Conclusion: There is limited evidence supporting the use of general CAM for managing pregnancy-related low back and/or pelvic pain. However, the restricted availability of high-quality studies, combined with the very low evidence strength, makes it impossible to make evidence-based recommendations for practice.
Resumo:
Os espumantes produzidos segundo o método Champanhês são obtidos após uma segunda fermentação em garrafa. Quando o vinho é vertido no copo, o CO2 produzido é libertado, sendo a espuma formada o resultado da sua interacção com os constituintes do vinho. A quantidade e a estabilidade da espuma do vinho espumante estão relacionadas com a sua composição química. Para além da espuma, o aroma é também um parâmetro importante de qualidade na apreciação geral de um vinho espumante. O aroma de um vinho espumante provém do contributo das uvas assim como do processo fermentativo. Dependendo do estado de maturação da uva, o contributo dos compostos voláteis para o aroma é diferente. Em virtude da vindima para os vinhos espumantes ser realizada antes da vindima para os vinhos maduros, dependendo da variedade, as uvas poderão não ser colhidas na expressão máxima do seu aroma, podendo verificar-se uma perda significativa do seu potencial varietal volátil. O objectivo desta dissertação é relacionar o aroma e a espuma dos vinhos espumantes com o potencial enológico das uvas e dos vinhos. Para isso, foi estudada a composição volátil das duas castas principais da Bairrada, a casta branca Fernão-Pires (FP) e a casta tinta Baga (BG), sendo estas duas das castas usadas para a produção de espumante. Para estudar a composição volátil das uvas durante a maturação, com vista a avaliar este efeito na expressão máxima de compostos voláteis, foi optimizada para este propósito a metodologia de microextracção em fase sólida em espaço de cabeça (HS-SPME). As uvas foram colhidas semanalmente, em duas vinhas, do pintor à pós-maturidade sendo posteriormente analisadas pela metodologia de HS-SPME seguida de cromatografia de gás acoplada à espectrometria de massa com quadrupolo (GC–qMS). No caso das uvas BG, observou-se um aumento acentuado na expressão máxima de compostos voláteis próximo da maturidade da uva determinada pelo teor em açúcar e acidez titulável, mantendo-se constante durante a pós-maturidade. Na determinação do perfil volátil das uvas ao longo da maturação foram identificados 66 compostos varietais nas uvas provenientes de uma vinha (Pedralvites) e 45 da outra vinha (Colégio). Em ambas as vinhas foram identificados 23 sesquiterpenóides, 13 monoterpenóides, 6 norisoprenóides, 2 álcoois aromáticos e 1 diterpenóide. Os sesquiterpenóides, devido à sua abundância em número e em área cromatográfica, podem ser considerados marcadores da casta BG. As uvas FP apresentaram um comportamento diferente do das uvas BG, sendo a expressão máxima de compostos voláteis expressa durante um curto período de tempo (1 semana), que coincide com a maturidade da uva. Depois de atingido este pico, observa-se uma diminuição drástica logo na semana seguinte. Este comportamento foi observado em ambas as vinhas, onde foram identificados 20 compostos voláteis varietais e 5 pré-fermentativos (álcoois e aldeídos em C6). Estes resultados mostram que quando estas castas são colhidas precocemente (1 semana antes da maturidade) para a produção de espumante, é observada uma redução significativa do potencial volátil que é expresso na maturidade. Para a análise da composição volátil dos vinhos espumantes foi optimizada uma metodologia de microextracção que permite usar uma maior quantidade de fase estacionária, a extracção sorptiva em barra de agitação (SBSE). O método foi optimizado usando 10 padrões de compostos voláteis representativos das principais famílias químicas presentes no vinho, nomeadamente, ésteres, monoterpenóides, sesquiterpenóides, norisoprenóides em C13 e álcoois. O método proposto apresenta uma boa linearidade (r2 > 0,982) e a reprodutibilidade varia entre 8,9 e 17,8%. Os limites de detecção para a maioria dos compostos é bastante baixo, entre 0,05 e 9,09 μg L-1. O método foi aplicado para a análise da composição volátil dos vinhos espumantes. Dentro dos vinhos espumantes analisados, foi estudada a influência da casta, do tipo de solo e do estado de maturação das uvas na sua composição volátil. A casta FP pode dar origem a vinhos com maior potencial de aroma do que a casta BG. Relativamente à avaliação dos diferentes estados de maturação, verificou-se que as uvas da maturidade e as da colheita tardia (uma semana depois da maturidade) deram origem aos vinhos com maior quantidade de compostos voláteis. Para os três tipos de solo estudados (arenoso, argiloso e argilo-calcário), o vinho obtido a partir de uvas colhidas no solo argilo-calcário foi o que mostrou a maior concentração de compostos voláteis varietais. A espuma destes vinhos espumantes foi também avaliada quanto à sua quantidade máxima (HM) e tempo de estabilidade (TS). O vinho espumante que apresentou um maior TS foi o vinho produzido a partir da casta FP proveniente de uma colheita tardia e solo argiloso. Os vinhos provenientes dos solos arenosos e argilo-calcários são os que apresentaram valores mais baixos de TS. Com vista a avaliar quais os conjuntos de moléculas do vinho que estão relacionados com as propriedades da espuma e possíveis sinergismos entre eles, para cada vinho espumante foi separada a fracção hidrofóbica de baixo peso molecular (MeLMW), a fracção de elevado peso molecular (HMW) e duas fracções de peso molecular intermédio (AqIMW e MeIMW). As propriedades da espuma dos vinhos modelo, reconstituídos com estas fracções e suas misturas, foram avaliadas. A combinação da fracção HMW com a MeLMW aumentou o TS 2,7 vezes quando comparado com o observado para a fracção HMW isoladamente, produzindo um efeito sinergético. Este aumento do TS ainda foi maior quando se combinou a fracção HMW com as subfracções obtidas a partir da fracção MeLMW, principalmente para as fracções menos apolares. A subfracção hidrofóbica menos apolar foi caracterizada por espectrometria de massa de ionização por electrospray (ESI-MS/MS) tendo sido identificada uma série de oligómeros de polietileno glicol e um potencial composto tensioactivo, o 8-hidroxi-tridecanoato de dietilenoglicolglicerilacetato. A fracção MeLMW foi também isolada da espuma do vinho espumante e caracterizada por ESI-MS/MS, permitindo identificar vários compostos potenciais tensioactivos, nomeadamente, dois monoacilgliceróis e quatro derivados de ácidos gordos com gliceriletilenoglicol. Estes resultados confirmam que estes compostos relacionados com a estabilidade da espuma existem em maior número na espuma do que no vinho. O vinho foi ainda fraccionado em 12 grupos de moléculas: 3 fracções de manoproteínas, 3 de arabinogalactanas, 3 de misturas de polissacarídeos, proteínas e compostos fenólicos e 3 fracções de peso molecular intermédio e baixo, compostas por uma mistura de hidratos de carbono, peptídeos e compostos fenólicos. Foram usados vinhos modelo reconstituídos com cada uma das fracções isoladas na concentração em que estas se encontraram no vinho. Foram também efectuados ensaios com soluções modelo dez vezes mais concentradas e com misturas de algumas das fracções. Todas as soluções formadas foram avaliadas quanto às propriedades da espuma. O aumento da concentração para dez vezes faz com que a solução contendo a fracção rica em manoproteínas (MP1) aumente para mais do dobro a HM e 7,4 vezes mais o TS. A combinação entre a fracção MP1 e a MeLMW produziu um aumento significativo nos parâmetros de HM e TS. A combinação da fracção HMW (manoproteínas com baixo teor em proteína) com a MeLMW (tensioactivos derivados de ácidos gordos com gliceriletilenoglicol) contém os compostos chave de um vinho espumante para se obter uma maior quantidade e estabilidade da espuma.
Resumo:
Os lenhosulfonatos representam um sub-produto formado durante o cozimento ao sulfito ácido, sendo queimados para a regeneração da base e recuperação de energia. No entanto, os lenhosulfonatos são também considerados uma importante matéria-prima para a produção de vários produtos de valor acrescentado. Os objectivos principais deste trabalho foram contribuir para uma melhor compreensão sobre a caracterização química e estrutural dos lenhosulfonatos do Eucalyptus globulus, assim como, para complementar a informação disponível sobre a síntese e a caracterização estrutural e térmica de materiais poliméricos obtidos a partir de compostos modelo dos produtos de oxidação dos lenhosulfonatos. O licor de cozimento ao sulfito foi analisado em termos do teor de cinzas, extractáveis, compostos voláteis, açúcares e lenhosulfonatos. O teor de cinzas e açúcares no licor de cozimento é muito elevado, tendo sido necessário purificar o mesmo (2,8-13,8 % e 3,2-9,1 %, respectivamente). A análise dos açúcares mostrou uma quantidade considerável de pentoses, sendo o açúcar predominante a xilose. Os lenhosulfonatos foram purificados, isolados e caracterizados por química molhada (titulação potenciométrica e oxidação com permanganato), análise elementar, espectroscopia de ultravioleta/visível (UV/Vis), espectroscopia de infravermelho de transformada de Fourier (FTIR), espectroscopia de ressonância magnética nuclear de protão (RMN de 1H) e carbono (RMN de 13C), espectrometria de massa de ionização por electrospray (ESI-MS), cromatografia de permeação em gel (GPC), termogavimetria (TGA) e calorimetria diferencial de varrimento (DSC). Os lenhosulfonatos são constituídos principalmente por unidades S, são parcialmente sulfonados e possuem um peso molecular relativamente baixo (Mw = 1250-2400 Da). A ruptura das ligações β-O-4 e α-O-4 da lenhina do Eucalyptus globulus após cozimento ao sulfito ácido originam olígomeros de baixo peso molecular cuja estrutura foi elucidada por RMN 1D/2D e ESI-MS. A degradação térmica dos lenhosulfonatos apresentou dois máximos de degradação a 188-190ºC e a 315-380ºC. As curvas de DSC mostraram um pico endotérmico para temperaturas inferiores a 130ºC e um pico exotérmico a 300-500ºC. Os lenhosulfonatos foram despolimerizados na presença de oxigénio molecular em meio alcalino. Os produtos de oxidação principais foram o aldeído siríngico, a vanilina, o ácido vanílico e o ácido siríngico. A adição do catalisador (sal de cobre) promoveu a oxidação dos lenhosulfonatos aumentando o rendimento dos aldeídos aromáticos (< 50%). A presença de açúcares nos lenhosulfonatos teve um efeito negativo no rendimento dos produtos de oxidação principais. Alguns compostos modelo dos produtos de oxidação dos lenhosulfonatos foram polimerizados por poliadição (catiónica e radicalar) e policondensação. Os monómeros e os polímeros foram caracterizados por espectroscopia de infravermelho de transformada de Fourier e reflectância total atenuada (FTIR-ATR), RMN em solução e no estado sólido, UV/Vis no estado sólido, GPC, difracção de raios-X (XRD), TGA e DSC. Os compostos modelo estudados foram os estirenos metoxi-substituídos (p-metoxiestireno e 3,4-dimetoxiestireno) e os ácidos hidroxi aromáticos metoxi-substituídos (ácido vanílico e ácido siríngico). O 3,4-dimetoxiestireno foi ainda copolimerizado com o éter isobutil vinílico e os seus copolímeros foram desmetilados, assim como, o poli(p-metoxiestireno) e o poli(3,4-dimetoxiestireno). A polimerização catiónica do p-metoxiestireno e 3,4-dimetoxiestireno é mais rápida e mais completa do que a polimerização radicalar produzindo polímeros com pesos moleculares elevados. O poli(p-metoxiestireno) (Mw = 235000 Da) possui um peso molecular maior do que o poli(3,4-dimetoxiestireno) (Mw = 18800 Da). A estabilidade térmica e a temperatura de transição vítrea diminuiram com a presença do segundo grupo metoxilo. A desmetilação dos homopolímeros foi bem sucedida, tendo sido corroborada por FTIR-ATR e RMN. A policondensação do ácido siríngico foi dificultada pela presença do segundo grupo metoxilo, tendo sido necessário adicionar uma maior quantidade do agente de condensação devido a factores estéricos. O poli(ácido vanílico) e poli(ácido siríngico) são insolúveis na maior parte dos solventes orgânicos, sendo parcialmente solúveis em clorofórmio, ácido triflúoracético, 1,1,2,2- tetracloroetano, dimetilsulfóxido, tetrahidrofurano, N,N’-dimetilformamida e 1,1,1,3,3,3-hexaflúor-2-propanol. A estabilidade térmica diminuiu com a presença do segundo grupo metoxilo e os dois polímeros não exibiram temperatura de transição vítrea. O poli(ácido vanílico) e poli(ácido siríngico) apresentaram uma estrutura muito cristalina (grau de cristalinidade 70% e 50%, respectivamente). O segundo grupo metoxilo aumentou o valor da absorvância, mas a forma do espectro de UV/Vis foi similar. A polimerização catiónica do éter isobutil vinílico resultou na produção de um polímero muito viscoso com peso molecular elevado (Mw = 20400 Da). A degradação térmica do polímero ocorreu em várias gamas de temperatura e foi completa (0% de resíduo a 800ºC). A copolimerização catiónica do 3,4-dimetoxiestireno com o éter isobutil vinílico foi realizada com proporções diferentes 80:20, 50:50 e 20:80. Os copolímeros apresentaram uma viscosidade elevada e um peso molecular baixo (Mw = 2000-4000 Da) que aumentou com a quantidade de éter isobutil vinílico. A degradação térmica dos copolímeros ocorreu também em várias gamas de temperatura, sendo a sua degradação completa (0,9-1,5% de resíduo a 800ºC). A desmetilação dos copolímeros não foi bem sucedida, tendo sido confirmada por FTIR-ATR e RMN.
Resumo:
Urban soil quality may be severely affected by hydrophobic organic contaminants (HOCs), impairing environmental quality and human health. A comprehensive study was conducted in two contrasting Portuguese urban areas (Lisbon and Viseu) in order to assess the levels and potential risks of these contaminants, to identify sources and study their behaviour in soils. The concentrations of HOCs were related to the size of the city, with much higher contamination levels observed in Lisbon urban area. Source apportionment was performed by studying the HOCs profiles, their relationship with potentially toxic elements and general characteristics of soil using multivariate statistical methods. Lisbon seems to be affected by nearby sources (traffic, industry and incineration processes) whereas in Viseu the atmospheric transport may be playing an important role. In a first tier of risk assessment (RA) it was possible to identify polycyclic aromatic hydrocarbons (PAHs) in Lisbon soils as a potential hazard. The levels of PAHs in street dusts were further studied and allowed to clarify that traffic, tire and pavement debris can be an important source of PAHs to urban soils. Street dusts were also identified as being a potential concern regarding human and environmental health, especially if reaching the nearby aquatic bodies. Geostatistical tools were also used and their usefulness in a RA analysis and urban planning was discussed. In order to obtain a more realistic assessment of risks of HOCs to environment and human health it is important to evaluate their available fraction, which is also the most accessible for organisms. Therefore, a review of the processes involved on the availability of PAHs was performed and the outputs produced by the different chemical methods were evaluated. The suitability of chemical methods to predict bioavailability of PAHs in dissimilar naturally contaminated soils has not been demonstrated, being especially difficult for high molecular weight compounds. No clear relationship between chemical and biological availability was found in this work. Yet, in spite of the very high total concentrations found in some Lisbon soils, both the water soluble fraction and the body residues resulting from bioaccumulation assays were generally very low, which may be due to aging phenomena. It was observed that the percentage of soluble fraction of PAHs in soils was found to be different among compounds and mostly regulated by soil properties. Regarding bioaccumulation assays, although no significant relationship was found between soil properties and bioavailability, it was verified that biota-to-soil bioaccumulation factors were sample dependent rather than compound dependent. In conclusion, once the compounds of potential concern are targeted, then performing a chemical screening as a first tier can be a simple and effective approach to start a RA. However, reliable data is still required to improve the existing models for risk characterization.