Simultaneous recording of shadowgrams and schlieren images for the study of plasma assisted aerodynamics

This work describes an optical device for the simultaneous recording of shadowgrams and schlieren images, and some results are presented concerning its applications to the study of plasma assisted flow control in airfoil models. This approach offers many advantages in comparison to other methods, specially because the use of tracer particles (like smoke in wind tunnels) is not required for the experiments, thus avoiding contaminations in the electric discharges or air flows. Besides, while schlieren images reveal the refractive index gradients in the area of study, shadowgrams detect the second order spatial derivatives of the refractive indexes. Therefore, the simultaneous recording of these different images may give interesting information about the phenomena under study. In this paper, these images were used to confirm the existence of vortex structures in the flow induced by corona discharges on airfoil models. These structures are a possible explanation for the effects of drag reduction and lift force increasing, which have been reported in experiments of plasma assisted Aerodynamics.

Simultaneous Recording of Shadowgrams and Schlieren Images for the Study of Plasma Assisted Aerodynamics

This work describes an optical device for the simultaneous recording of shadowgrams and schlieren images, and some results are presented concerning its application to the study of plasma assisted flow control in airfoil models. This approach offers many advantages in comparison to other methods, specially because the use of tracer particles (like smoke in wind tunnels) is not required for the experiments, thus avoiding contaminations in the electric discharges or air flows. Besides, while schlieren images reveal the refractive index gradients in the area of study, shadowgrams detect the second order spatial derivatives of the refractive indexes. Therefore, the simultaneous recording of these different images may give interesting information about the phenomena under study.

Aplicação tardia de glyphosate e estande e desenvolvimento inicial do arroz em sistema de cultivo mínimo

O controle de plantas daninhas na cultura do arroz é ainda um problema, mesmo em cultivo mínimo, em razão do revolvimento do solo na linha de semeadura, que proporciona o reaparecimento de infestantes. Assim, objetivou-se estudar o efeito do atraso da aplicação de glyphosate sobre a formação do estande e o desenvolvimento inicial das plantas de arroz cv. IAC 102 irrigado por inundação. O experimento foi conduzido sob túnel plástico, em caixas d'água de 500 L, contendo NEOSSOLO FLÚVICO Ta Eutrófico. O delineamento experimental foi o de blocos casualizados, com quatro repetições. Os tratamentos consistiram da aplicação de glyphosate: seis horas antes da semeadura do arroz (testemunha); no início da emergência; três dias após a emergência; e seis dias após, sem e com lâmina d'água. A dose do herbicida foi de 1.920 g i.a. ha-1. Para todas as variáveis analisadas houve efeito significativo dos tratamentos; aos 42 dias após a emergência, constatou-se que a testemunha foi estatisticamente superior, na formação do estande, na altura de plantas, no comprimento de raiz e na massa seca das partes aérea e de raiz, aos demais tratamentos em que ocorreram atrasos na aplicação do glyphosate.

Métodos e técnicas geoelétricas rasas na delimitação de área afetada por ruptura em teto de túnel urbano

Este trabalho apresenta um uso da geofísica aplicada em uma situação de ambiente urbano. O objetivo dos levantamentos foi o de delimitar a extensão da zona afetada por um colapso e desmoronamento do teto de um túnel em construção sob o Parque do Ibirapuera na capital paulista. São descritos e apresentados os resultados obtidos através do emprego dos métodos geofísicos geoelétricos e suas técnicas, em uma situação emergencial e de risco em uma área urbana na cidade de São Paulo. Também são comparadas as técnicas/arranjos de campo e a forma de apresentação e interpretação dos mesmos. Os métodos empregados foram a Eletrorresistividade, Polarização Induzida (IP) e Potencial Espontâneo (SP). Os trabalhos de campo e interpretação preliminar foram efetuados em apwenas um fim de semana (sábado e domingo). Os resultados mostraram-se plenamente satisfatórios e possibilitaram significativa redução nos custos nas obras de remediação da área do incidente, cuja área decresceu da inicialmente estimada pela engenharia (20x20 m) para 3x5 m definida pelos estudos geofísicos.

Serpentine leafminer (Liriomyza trifolii) on potato (Solanum tuberosum): field observations and plant photosynthetic responses to injury

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Movimento de gaveta em joelhos de cães submetidos à estabilização extracapsular após secção do ligamento cruzado cranial in vitro

A técnica TightRope, que procura aperfeiçoar a estabilização extra-capsular com sutura lateral, por meio da realização de mínimas incisões e criação de túneis ósseos em pontos isométricos, que permitem a inserção de mecanismo que anula o movimento de gaveta, além de reduzir a ocorrência de complicações graves. Dessa forma, objetivou-se avaliar a modificação da técnica TightRope em joelhos de cadáveres caninos com a finalidade de disponibilizar um procedimento simples e de custo reduzido para tratamento da Ruptura do ligamento cruzado cranial (RLCCr). Experimentalmente, foram utilizados 20 membros pélvicos de dez cadáveres caninos, provenientes do setor de patologia da Universidade Norte do Paraná, os quais pesavam entre 6,3 e 24kg. Para estabilização do LCCr, rompido intencionalmente, foi adotada a técnica de TightRope modificada utilizando fio de poliamida, cavilha e emprego de um parafuso ortopédico para proporcionar a fixação óssea. Comparando os valores de deslocamento obtidos durante a realização do movimento de gaveta previamente à ruptura do LCCr e após a realização do procedimento cirúrgico, observou-se que a modificação da técnica TightRope promoveu estabilidade significativa para a maioria (12 de 20) dos joelhos testados (P=0,0033). Contudo, essa estabilidade foi inferior, quando comparada à estabilidade do ligamento intacto.

Nest architecture of the leaf-cutting ant Acromyrmex rugosus rugosus

The prominent nests mounds of many ant species are one of the most obvious signs of their presence, yet the subterranean architecture of nests is often poorly known. The present work aimed to establish the external and internal structure of nests of a species of leaf-cutting ant, Acromyrmex rugosus rugosus, by either marking the interior of nests with talcum powder, or forming casts with cement. Twelve nests were excavated and surveyed, with eight being marked with talcum powder and four cast with cement. The external and internal structure of the nests was highly variable. The largest and smallest nests had mound areas of 9.89 m(2) and 0.01 m(2) respectively. The number of chambers found ranged from I to 26, with maximum dimensions of between 6 and 70 cm. Chambers were found close to the soil surface (6 cm) down to a maximum depth of 3.75 m. In addition to chambers containing fungus garden, some chambers were found to be empty, filled with soil or filled with waste, the first time this has been recorded in a species of Acromyrmex. The nests of A. rugosus rugosus appear to be unusually complex for the genus, containing a diversity of irregular chambers and tunnels.

NEST REUSE AND COMMUNAL NESTING IN MICROTHURGE-CORUMBAE (HYMENOPTERA, MEGACHILIDAE), WITH SPECIAL REFERENCE TO NEST DEFENSE

Observations on the nesting activities of Microthurge corumbae, carried out at the University Campus of Ribeirao Preto, São Paulo, Brazil, from 1977 to 1981, indicated that 61.9% of nests were re-used by succeeding generations. Re-use by one generation was more frequent than by two generations, and re-use by a third was observed only once. Nests were re-used by one or several females. Single females were more frequently in the first re-use. In these cases nest re-use did not differ essentially from the solitary foundation of a new nest, except for the adoption of a pre-existing nest without excavation. In multifemale nests, analysis of relative age (wing wear), ovarian and spermathecal conditions of associated females and the content of nests at excavation indicated that the social pattern in such colonies is communal. There is some evidence that the associated females are relatives. The chalcidoid wasp Leucospis was the principal nest parasite, and ants of the genus Crematogaster were nest predators. In multifemale nests, the rate of parasitism was significantly lower than in solitary nests, indicating that nest-sharing resulted in improved nest defense. on the other hand. The absence of predation on immatures of the first generation of M. corumbue in multifemale nests suggests that such nests are also more resistant to attack by predators.

Nest architecture of Atta laevigata (F. Smith, 1858) (Hymenoptera : Formicidae)

The internal structure of three nests of Atta laevigata was studied in Botucatu city, São Paulo State, Brazil. Two nests were excavated through the opening of trenches and one was cement-moulded to enable a better view of the internal structures. The three nests presented a similar structure, with the depths and number of chambers varying as a function of the loose soil area of the nests. The number of chambers ranged from 1149 to 7864, reaching as deep as 7 m underground. Chamber volume ranged from 0.03 to 511. The foraging tunnels extended as far as 70m from the loose soil region. The nests of this species are the deepest within the genus Atta and have the highest number of chambers.

Placentation in the capybara (Hydrochaerus hydrochaeris), agouti (Dasyprocta aguti) and paca (Agouti paca)

Placentae of three hystricimorph rodents-capybara, agouti and paca-were examined by conventional histology, immunohistochemistry for cytokeratin and vimentin, and TUNEL staining. The placentae were divided into lobules of labyrinthine syncytium separated by interlobular and marginal trophoblast. The subplacenta comprised cytotrophoblasts, supported on lamellae of allantoic mesoderm, and syncytiotrophoblast. The central excavation was still apparent in the definitive placenta of capybara. In agouti and paca, the decidua of the junctional zone formed a mesoplacenta comprising a capsule and a pedicle. Towards term the pedicle formed a tenuous attachment between placenta and uterine wall comprising a few maternal vessels surrounded by degraded tissue. In paca placenta, it was shown by TUNEL staining that breakdown of this tissue occurred by apoptosis. The visceral yolk sac was highly villous and, in agouti, the yolk sac villi were extremely long. Lateral to its attachment to the placenta, the fetal surface was covered with non-vascular yolk sac endoderm. A layer of spongiotrophoblast cells was interposed between the endoderm and the marginal trophoblast. (C) 2002 Elsevier B.V. Ltd. All rights reserved.

Multifractal characterization of saprolite particle-size distributions after topsoil removal

Multifractal analysis is now increasingly used to characterize soil properties as it may provide more information than a single fractal model. During the building of a large reservoir on the Parana River (Brazil), a highly weathered soil profile was excavated to a depth between 5 and 8 m. Excavation resulted in an abandoned area with saprolite materials and, in this area, an experimental field was established to assess the effectiveness of different soil rehabilitation treatments. The experimental design consisted of randomized blocks. The aim of this work was to characterize particle-size distributions of the saprolite material and use the information obtained to assess between-block variability. Particle-size distributions of the experimental plots were characterized by multifractal techniques. Ninety-six soil samples were analyzed routinely for particle-size distribution by laser diffractometry in a range of scales, varying from 0.390 to 2000 mu m. Six different textural classes (USDA) were identified with a clay content ranging from 16.9% to 58.4%. Multifractal models described reasonably well the scaling properties of particle-size distributions of the saprolite material. This material exhibits a high entropy dimension, D-1. Parameters derived from the left side (q > 0) of the f(alpha) spectra, D-1, the correlation dimension (D-2) and the range (alpha(0)-alpha(q+)), as well as the total width of the spectra (alpha(max) - alpha(min)) all showed dependence on the clay content. Sand, silt and clay contents were significantly different among treatments as a consequence of soil intrinsic variability. The D, and the Holder exponent of order zero, alpha(0), were not significantly different between treatments; in contrast, D-2 and several fractal attributes describing the width of the f(alpha) spectra were significantly different between treatments. The only parameter showing significant differences between sampling depths was (alpha(0) - alpha(q+)). Scale independent fractal attributes may be useful for characterizing intrinsic particle-size distribution variability. (c) 2006 Elsevier B.V. All rights reserved.

Broiler Response to Different Wind Speeds

Broiler production in Brazil has turned into a very competitive activity in the late years. Constant innovation leads to higher productivity maintaining the same cost of production, which is a desirable situation. Lately one characteristic for broiler housing in Brazil has been the increase in birds density requiring the use of controlled environment through the use of fan and fogging systems in order to achieve better birds productive performance. Most Brazilian producer already uses cooling equipment however it is still unknown the right way to control the wind speed and direction towards the birds. This present research has the objective to evaluate the effect of the wind speed on the heat transfer from the birds to the environment for broilers at 27 days old. There was used 200 birds, placed in a wind tunnel measuring 1.10 m high by 1.10m wide x 10.0 m of length, and the birds density varied from 9, 16 and 20 birds/m 2. Two wind speed were simulated 340 rpm (1.0 m/s) and 250 rpm (0.3 m/s). The increase in the wind velocity related to the smaller bird densityled to a higher heat loss and to a more uniform temperature distribution in its exposed areas.

Comparação entre parâmetros externos e internos de ninhos de Atta bisphaerica Forel, 1908 (Hymenoptera, Formicidae)

Six Atta bisphaerica, Forel, 1908 (Hymenoptera, Formicidae) nests were excavated with the aim of studying the relationship between area and volume of the mound, the total volume and total number of chambers in the nest. Prior to excavation, the area and the volume of refused soil in the nests were measured. During excavation, all data referring to chambers were recorded, such as: length, depth and width. The nests named A1, A2, A3, A4, A5 and A6 presented 31.16; 40.87, 67.08, 35.04, 73.48 and 18,73m 2 of mound area, respectively. The mound area did not correlate either with the volume or with the total number of chambers. The mound volume correlated significantly with the mound area, total number and total volume of chambers. The total volume of chambers was correlated with the total number of chambers.

Orientação geográfica de estufas de polietileno e potenciais de água no solo no cultivo do melão rendilhado híbrido 'nero'

This study aimed to verify the effects of four different minimum soil watler potentials (-30, -40, -50 e -70 kPa) and two different plastic tunnel positions (North-South and East-West) on net melon yield. The results showed that in the East-West position the yield and fruit weight were higher than in the North-South position. The highest yields of melon crop were obtained from -30 kPa. to -40 kPa minimum soil water potential.

Aplicação da Geoestatística Não-paramétrica para a compartimentação geomecânica de uma extensão típica do túnel do metrô - Linha 4, da cidade de São Paulo

In view of the limited number of drill holes, interpolation of the data becomes a relatively complex task. In this study, we sought to make estimates associated with lithological types, since a quantification based on lithology can be extracted from the empty spaces in the sampling. For example, QBarton is always below the median of the biotitic litotype, information which can be used in the elaboration of geostatistical models in situations where samples are lacking. To overcome bias in the data, required by geostatistical conceptualization, we worked with the residuals obtained from the adjustment of a surface and the observed values, for the variographic analysis. The final results made possible a more optimized evaluation of the final costs required for the construction project.