Connections, September 2004

Quarterly newsletter prepared by the Iowa Department of Transportation's Office of Public Transit.

Non-invasive and non-occlusive blood pressure estimation via a chest sensor.

The clinical demand for a device to monitor Blood Pressure (BP) in ambulatory scenarios with minimal use of inflation cuffs is increasing. Based on the so-called Pulse Wave Velocity (PWV) principle, this paper introduces and evaluates a novel concept of BP monitor that can be fully integrated within a chest sensor. After a preliminary calibration, the sensor provides non-occlusive beat-by-beat estimations of Mean Arterial Pressure (MAP) by measuring the Pulse Transit Time (PTT) of arterial pressure pulses travelling from the ascending aorta towards the subcutaneous vasculature of the chest. In a cohort of 15 healthy male subjects, a total of 462 simultaneous readings consisting of reference MAP and chest PTT were acquired. Each subject was recorded at three different days: D, D+3 and D+14. Overall, the implemented protocol induced MAP values to range from 80 ± 6 mmHg in baseline, to 107 ± 9 mmHg during isometric handgrip maneuvers. Agreement between reference and chest-sensor MAP values was tested by using intraclass correlation coefficient (ICC = 0.78) and Bland-Altman analysis (mean error = 0.7 mmHg, standard deviation = 5.1 mmHg). The cumulative percentage of MAP values provided by the chest sensor falling within a range of ±5 mmHg compared to reference MAP readings was of 70%, within ±10 mmHg was of 91%, and within ±15mmHg was of 98%. These results point at the fact that the chest sensor complies with the British Hypertension Society (BHS) requirements of Grade A BP monitors, when applied to MAP readings. Grade A performance was maintained even two weeks after having performed the initial subject-dependent calibration. In conclusion, this paper introduces a sensor and a calibration strategy to perform MAP measurements at the chest. The encouraging performance of the presented technique paves the way towards an ambulatory-compliant, continuous and non-occlusive BP monitoring system.

Connections, January 2005

Quarterly newsletter prepared by the Iowa Department of Transportation's Office of Public Transit.

Dose reconstruction in the context of tomotherapy

In vivo dosimetry is a way to verify the radiation dose delivered to the patient in measuring the dose generally during the first fraction of the treatment. It is the only dose delivery control based on a measurement performed during the treatment. In today's radiotherapy practice, the dose delivered to the patient is planned using 3D dose calculation algorithms and volumetric images representing the patient. Due to the high accuracy and precision necessary in radiation treatments, national and international organisations like ICRU and AAPM recommend the use of in vivo dosimetry. It is also mandatory in some countries like France. Various in vivo dosimetry methods have been developed during the past years. These methods are point-, line-, plane- or 3D dose controls. A 3D in vivo dosimetry provides the most information about the dose delivered to the patient, with respect to ID and 2D methods. However, to our knowledge, it is generally not routinely applied to patient treatments yet. The aim of this PhD thesis was to determine whether it is possible to reconstruct the 3D delivered dose using transmitted beam measurements in the context of narrow beams. An iterative dose reconstruction method has been described and implemented. The iterative algorithm includes a simple 3D dose calculation algorithm based on the convolution/superposition principle. The methodology was applied to narrow beams produced by a conventional 6 MV linac. The transmitted dose was measured using an array of ion chambers, as to simulate the linear nature of a tomotherapy detector. We showed that the iterative algorithm converges quickly and reconstructs the dose within a good agreement (at least 3% / 3 mm locally), which is inside the 5% recommended by the ICRU. Moreover it was demonstrated on phantom measurements that the proposed method allows us detecting some set-up errors and interfraction geometry modifications. We also have discussed the limitations of the 3D dose reconstruction for dose delivery error detection. Afterwards, stability tests of the tomotherapy MVCT built-in onboard detector was performed in order to evaluate if such a detector is suitable for 3D in-vivo dosimetry. The detector showed stability on short and long terms comparable to other imaging devices as the EPIDs, also used for in vivo dosimetry. Subsequently, a methodology for the dose reconstruction using the tomotherapy MVCT detector is proposed in the context of static irradiations. This manuscript is composed of two articles and a script providing further information related to this work. In the latter, the first chapter introduces the state-of-the-art of in vivo dosimetry and adaptive radiotherapy, and explains why we are interested in performing 3D dose reconstructions. In chapter 2 a dose calculation algorithm implemented for this work is reviewed with a detailed description of the physical parameters needed for calculating 3D absorbed dose distributions. The tomotherapy MVCT detector used for transit measurements and its characteristics are described in chapter 3. Chapter 4 contains a first article entitled '3D dose reconstruction for narrow beams using ion chamber array measurements', which describes the dose reconstruction method and presents tests of the methodology on phantoms irradiated with 6 MV narrow photon beams. Chapter 5 contains a second article 'Stability of the Helical TomoTherapy HiArt II detector for treatment beam irradiations. A dose reconstruction process specific to the use of the tomotherapy MVCT detector is presented in chapter 6. A discussion and perspectives of the PhD thesis are presented in chapter 7, followed by a conclusion in chapter 8. The tomotherapy treatment device is described in appendix 1 and an overview of 3D conformai- and intensity modulated radiotherapy is presented in appendix 2. - La dosimétrie in vivo est une technique utilisée pour vérifier la dose délivrée au patient en faisant une mesure, généralement pendant la première séance du traitement. Il s'agit de la seule technique de contrôle de la dose délivrée basée sur une mesure réalisée durant l'irradiation du patient. La dose au patient est calculée au moyen d'algorithmes 3D utilisant des images volumétriques du patient. En raison de la haute précision nécessaire lors des traitements de radiothérapie, des organismes nationaux et internationaux tels que l'ICRU et l'AAPM recommandent l'utilisation de la dosimétrie in vivo, qui est devenue obligatoire dans certains pays dont la France. Diverses méthodes de dosimétrie in vivo existent. Elles peuvent être classées en dosimétrie ponctuelle, planaire ou tridimensionnelle. La dosimétrie 3D est celle qui fournit le plus d'information sur la dose délivrée. Cependant, à notre connaissance, elle n'est généralement pas appliquée dans la routine clinique. Le but de cette recherche était de déterminer s'il est possible de reconstruire la dose 3D délivrée en se basant sur des mesures de la dose transmise, dans le contexte des faisceaux étroits. Une méthode itérative de reconstruction de la dose a été décrite et implémentée. L'algorithme itératif contient un algorithme simple basé sur le principe de convolution/superposition pour le calcul de la dose. La dose transmise a été mesurée à l'aide d'une série de chambres à ionisations alignées afin de simuler la nature linéaire du détecteur de la tomothérapie. Nous avons montré que l'algorithme itératif converge rapidement et qu'il permet de reconstruire la dose délivrée avec une bonne précision (au moins 3 % localement / 3 mm). De plus, nous avons démontré que cette méthode permet de détecter certaines erreurs de positionnement du patient, ainsi que des modifications géométriques qui peuvent subvenir entre les séances de traitement. Nous avons discuté les limites de cette méthode pour la détection de certaines erreurs d'irradiation. Par la suite, des tests de stabilité du détecteur MVCT intégré à la tomothérapie ont été effectués, dans le but de déterminer si ce dernier peut être utilisé pour la dosimétrie in vivo. Ce détecteur a démontré une stabilité à court et à long terme comparable à d'autres détecteurs tels que les EPIDs également utilisés pour l'imagerie et la dosimétrie in vivo. Pour finir, une adaptation de la méthode de reconstruction de la dose a été proposée afin de pouvoir l'implémenter sur une installation de tomothérapie. Ce manuscrit est composé de deux articles et d'un script contenant des informations supplémentaires sur ce travail. Dans ce dernier, le premier chapitre introduit l'état de l'art de la dosimétrie in vivo et de la radiothérapie adaptative, et explique pourquoi nous nous intéressons à la reconstruction 3D de la dose délivrée. Dans le chapitre 2, l'algorithme 3D de calcul de dose implémenté pour ce travail est décrit, ainsi que les paramètres physiques principaux nécessaires pour le calcul de dose. Les caractéristiques du détecteur MVCT de la tomothérapie utilisé pour les mesures de transit sont décrites dans le chapitre 3. Le chapitre 4 contient un premier article intitulé '3D dose reconstruction for narrow beams using ion chamber array measurements', qui décrit la méthode de reconstruction et présente des tests de la méthodologie sur des fantômes irradiés avec des faisceaux étroits. Le chapitre 5 contient un second article intitulé 'Stability of the Helical TomoTherapy HiArt II detector for treatment beam irradiations'. Un procédé de reconstruction de la dose spécifique pour l'utilisation du détecteur MVCT de la tomothérapie est présenté au chapitre 6. Une discussion et les perspectives de la thèse de doctorat sont présentées au chapitre 7, suivies par une conclusion au chapitre 8. Le concept de la tomothérapie est exposé dans l'annexe 1. Pour finir, la radiothérapie «informationnelle 3D et la radiothérapie par modulation d'intensité sont présentées dans l'annexe 2.

Connections, May 2005

Quarterly newsletter prepared by the Iowa Department of Transportation's Office of Public Transit.

Iowa Commuting Patterns, 2000

A century ago, the majority of workers were employed near their homes—on farms or in cities and towns. As industrialization increased and suburbs surrounded central cities, commuting meant going from homes in suburbs to jobs in cities. Today, there is a growing trend of workers commuting between suburbs. On any given day, 61,775 workers commute to jobs in Iowa counties other than the one in which they live. The most important reason for increased commuting has been employment growth. Rising incomes and the growth of suburbs have also been factors. In the past, the increased employment of women added to the number of commuters. Commuting patterns are a key consideration in transportation planning. In more urban states than Iowa, there is concern that the use of mass transit continues to decline. In Iowa, where so much of our commuting is between counties, private vehicles are often the only practical means of getting to and from work. On any given day, 1,155,008 single-occupancy vehicles are driven to and from jobs somewhere in Iowa. At the same time, an additional158,699 workers share rides by participating in carpools.

Connections, September 2005

Quarterly newsletter prepared by the Iowa Department of Transportation's Office of Public Transit.

Connections, September 2002

Newsletter for Iowa Department of Transportation, Office of Public Transit

Connections, Fall 2001

Newsletter for Iowa Department of Transportation, Office of Public Transit

Connections, Winter 2001-2002

Newsletter for Iowa Department of Transportation, Office of Public Transit

Connections, Spring 2001

Newsletter for Iowa Department of Transportation, Office of Public Transit

Connections, Summer 2001

Newsletter for Iowa Department of Transportation, Office of Public Transit

2006-2010 Iowa Transportation Improvement Program

This document provides the planned investments in Iowa's transportation system for the five-year period of 2006-2010. It encompasses aviation, railroads, rivers, trails, state parks and institutional roads, roadways, and public transit.

Theorizing institutional changes: understanding decentralization and federalization in Brazil, Spain and South Africa

In light of the existing theories about institutional change, this paper seeks to advance a common framework to understand the unfolding of decentralization and federalization in three countries: Brazil, Spain, and South Africa. Although in different continents, these three countries witnessed processes after their respective transitions to democracy that transferred administrative and fiscal authority to their regions (decentralization) and vertically distributed political and institutional capacity (federalization). This paper attempts to explain how institutional changes prompted a shift of power and authority towards regional governments by looking at internal sources of change within the intergovernmental arena in the three countries. This analysis is organized around two propositions: that once countries transit to democracy under all-encompassing constitutions there are high incentives for institutional change, and that under a bargained intergovernmental interaction among political actors subnational political elites are able to advance their interests incrementally. In short, through a common framework this paper will explain the evolving dynamics of intergovernmental dynamics in three countries.

The impact of pre- and post-natal contexts on immunity, glucocorticoids and oxidative stress resistance in wild and domesticated grey partridges

Genetic background, prenatal and post-natal early-life conditions influence the development of interconnected physiological systems and thereby shape the phenotype. Certain combinations of genotypes and pre- and post-natal conditions may provide higher fitness in a specific environmental context. Here, we investigated how grey partridges Perdix perdix of two strains (wild and domesticated) cope physiologically with pre- and post-natal predictable vs. unpredictable food supply. Food unpredictability occurs frequently in wild environments and requires physiological and behavioural adjustments. Well-orchestrated and efficient physiological systems are presumably more vital in a wild environment as compared to captivity. We thus predicted that wild-strain grey partridges have a stronger immunity, glucocorticoid (GC) stress response and oxidative stress resistance (OSR) than domesticated birds, which have undergone adaptations to captivity. We also predicted that wild-strain birds react more strongly to environmental stimuli and, when faced with harsh prenatal conditions, are better able to prepare their offspring for similarly poor post-natal conditions than birds of domesticated origin. We found that wild-strain offspring were physiologically better prepared for stressful situations as compared to the domesticated strain. They had a high GC stress response and a high OSR when kept under predictable food supply. Wild-strain parents reacted to prenatal unpredictable food supply by lowering their offspring's GC stress response, which potentially lowered GC-induced oxidative pressure. No such pattern was evident in the domesticated birds. Irrespective of strain and prenatal feeding scheme, post-natal unpredictable food supply boosted immune indices, and GC stress response was negatively related to antibody response in females and to mitochondrial superoxide production. Wild-strain grey partridge showed fitness-relevant physiological advantages and appeared to prepare their offspring for the prospective environment. Negative relationships between GC stress response, immunity and oxidative indices imply a pivotal role of an organism's oxidative balance and support the importance of considering multiple physiological systems simultaneously.