Filmes e coberturas a base do resíduo da extração de corante de cúrcuma

O objetivo deste trabalho foi avaliar o potencial de uso do resíduo da extração de pigmento de cúrcuma na produção de filmes e coberturas. Para o estudo dos filmes, foram utilizados glicerol e sorbitol como plastificantes e avaliados os efeitos da concentração de farinha de cúrcuma e do plastificante sobre as propriedades mecânicas, solubilidade, permeabilidade ao vapor de água (PVA), molhabilidade, atividade antioxidante, teor de curcuminóides e teor de compostos fenólicos totais utilizando um Delineamento Central Composto Rotacional 22, e os resultados foram avaliados utilizando a metodologia de superfície de resposta (MSR). A concentração de farinha afetou de forma positiva a espessura, PVA e o teor de curcuminóides totais dos filmes plastificados com glicerol e sorbitol. Entretanto, esta variável afetou as propriedades de solubilidade, molhabilidade e teor de compostos fenólicos totais somente dos filmes com glicerol. A concentração de plastificante (glicerol ou sorbitol) afetou significativamente a solubilidade, PVA e molhabilidade de ambos os filmes. Filmes de farinha de cúrcuma com boas propriedades mecânicas, baixa permeabilidade ao vapor de água, alta atividade antioxidante, alto teor de curcuminóides e alto teor de compostos fenólicos totais podem ser produzidos utilizando 27,9 a 30 g glicerol/100 g farinha ou 30 a 42 g sorbitol/100 g farinha e concentração de farinha na faixa de 5% a 6,41%. A cobertura de farinha de cúrcuma contendo 6% de farinha e 30 g glicerol/100 g de farinha foi aplicada em bananas Maçã (Musa acuminata) armazenadas a 27ºC e 65% UR. Assim, foi avaliado o efeito da cobertura na qualidade pós-colheita das bananas em função à suas características físico-químicas como perda de massa, firmeza da polpa, pH, acidez titulável, sólidos solúveis, açúcares redutores e cor da casca. Os resultados mostraram que a cobertura foi eficiente em diminuir a perda de massa, o teor de açúcares redutores, a acidez, a perda da firmeza e a cor da casca principalmente durante a etapa de maturação do fruto. Entretanto, não foi observado grande efeito da cobertura sobre o pH e o teor de sólidos solúveis durante o período estudado. As bananas sem a cobertura tiveram vida útil de 6 dias, enquanto as bananas com cobertura tiveram vida útil de 9 dias.

Bioactive compounds and physical and chemical characteristics of mini tomatoes: influence of postharvest treatments

Tomatoes are among the most cultivated and used vegetables in the world. They are very succeptible to post harvest losses due to high perishability, therefore the use of postharvest treatments may contribute to conservation of this fruit, however the treatments might affect significantly physico-chemical, sensory and nutritional characteristics of tomatoes. Given the perishability of tomato and the economic importance of small tomato fruits, the purpose of the present study was to determine the effect of gamma radiation, carnauba coating and 1-MCP treatments on tomato fruit quality during storage. The study may be divided into two parts. In the first, mini tomatoes cv. Sweet Grape were harvested at breaker stage, divided into 4 grous and treated with gamma radiation (0.6 kGy), carnauba coating (1 L 1000 kg-1) and 1-MCP (500 nL L-1) and then stored at 25±2°C for 30 days with a control group of tomatoes. In the seconnd part, tomatoes harvested at light-red stage were submitted to the same treatments and storage period. Every 6 days tomatoes were evaluated for color modifications, fruit firmness, souble and total pectin (only for light-red tomatoes), mass loss, titratable acidity (TA), soluble solids (SS), SS/TA ratio, carotenoids profile, formation of lycopene isomers, total phenolic compounds, ascorbic acid and antioxidant capacity. For tomatoes harvested at breaker stage and submitted to the treatments the results showed mass loss was delaying mainly by carnauba wax, and to a lesser extend by 1-MCP. Fruit firmness were better retained for 1-MCP treated fruits and carnauba treatment showed a transient effect in preserving fruit firmness. SS/TA of tomatoes treated with gamma radiation and carnauba presented no differences from control values, and were lower with the application of 1-MCP. Color was negatively affected by 1-MCP and earlier changed (6th day) when gamma radiation was applied. In relation to bioactive compounds of tomatoes harvest at breaker stage, results indicated gamma radiation and 1-MCP decreased the final content of lycopene and produced more (Z)-isomers of lycopene. Gamma radiation also induced a decreased in ?-carotene and an increased in phenolic compounds by the end of storage period. 1-MCP treatment promoted a slow down increase in ascorbic acid content during storage. Antioxidant capacity of the hydrophilic fraction was not dramatically affected by treatments and the lipophilic fraction was lower, especially for 1-MCP fruits. In addition, contents of ?-carotene, lycopene, (Z)-isomers of lycopene, ascorbic acid and antioxidant capacity increased during the period of storage while contents of lutein and phenolic compounds tended to decrease. Regarding tomatoes harvest at light-red stage, the most effective treatments for delaying fruit firmness and mass loss was carnauba and 1-MCP, while gamma radiation was the treatment with higher mass loss and the less fruit firmness, which could be associated with the higher solubilization of pectins promoted by radiation treatment. Color (L* and Hue) was mainly affected by 1-MCP treatment which delayed color development, however, by the end of storage, the values were not different from the other treatments. SS/TA ratio was lower for fruits treated with 1-MCP and TA was not so dramatically affected by treatments. Furthermore, mini tomatoes harvested at light-red stage, demonstrated irradiation induced changes in the final content of lycopene, increasing it, and formed less (13Z)-lycopene, while 1-MCP and carnauba coating slow down the increase in lycopene and slown down the decrease of ascorbic acid and phenolic compounds. Antioxidant capacity of lipophilic fraction was not affected by treatments and the hydrophilic fraction was lower for irradiated fruits only on day 0 as well as phenolic compounds. In the other days, no differences among treatments were observed for hydrophilic antioxidant capacity. Considering the results, the best combination of SS and TA and fruit preservation for mini tomatoes harvest at breaker stage was promoted by carnauba coating, which seems to be the treatment that causes fewer changes in bioactive compounds of breaker tomatoes. However, when mini tomatoes were harvested at light-red stage, SS/TA ratio and color were better and, to preserve the quality of these fruits, besides carnauba coating, 1-MCP also could be indicated

Estabilidade química e funcional dos compostos bioativos da polpa de buriti congelada, liofilizada e atomizada

O buriti (Mauritia flexuosa L.) é um fruto rico em carotenoides, ácidos graxos e compostos fenólicos com grande potencial de industrialização. Entretanto, sua vida útil reduzida dificulta a comercialização e um maior aproveitamento. Dessa forma, tecnologias de processamento podem ser empregadas para que haja maior utilização e expansão do buriti. Este trabalho teve como objetivo caracterizar polpa de buriti congelada, liofilizada e atomizada, quantificando os compostos bioativos (carotenoides e ácidos graxos), a composição centesimal e mineral, além de avaliar a estabilidade química e funcional da polpa submetida a esses tratamentos ao longo do tempo de armazenamento. Polpas de buriti oriunda da Comunidade Boa Vista, zona rural do município de Arinos, MG, foram submetidas a três processamentos: congelamento (eleito como controle), liofilização e atomização (com adição de maltodextrina como coadjuvante de tecnologia). Após o processamento, as polpas foram acondicionadas em embalagens laminadas compostas por poliéster, alumínio e polietileno (25 x 25 cm), com capacidade para 100 g cada, e armazenadas a -23 °C para o congelamento e a temperatura ambiente para as polpas desidratadas. As análises físicas, químicas, nutricionais e funcionais foram realizadas logo após o processamento, para caracterização das polpas e nos períodos: 1, 14, 28, 42 e 56 dias, para avaliação da estabilidade. O delineamento experimental empregado constituiu-se de dois fatores (processamento e período) e a interação entre eles. Os dados foram analisados estatisticamente por meio da Análise de Variância Univariada (ANOVA) com nível de significância de 5 %. Constatou-se que durante a estocagem a polpa liofilizada apresentou maior brilho, menor opacidade, valores inferiores para o pH, menor variação da atividade de água e maior acidez titulável. Esses parâmetros são importantes indicadores de qualidade da polpa durante a sua estocagem, visto que dificultam o desenvolvimento microbiano. A adição da maltodextrina no processo de atomização acarretou maiores teores de sólidos solúveis em relação aos demais tratamentos. Os resultados demonstraram que, ao longo do armazenamento, a liofilização contribuiu para a melhor preservação dos carotenoides totais. A quantificação dos carotenoides e dos ácidos graxos na polpa congelada demonstrou que houve melhor preservação de carotenoides do tipo alfa e beta caroteno, dos ácidos graxos oleico, indicando maior valor nutricional para a alimentação humana. Apesar dos resultados satisfatórios para a polpa congelada, durante o tempo analisado a polpa congelada apresentou maiores perdas em relação à polpa liofilizada. Para a classe dos compostos fenólicos, a liofilização apresentou melhores resultados ao longo da estocagem. O uso de baixas temperaturas foi mais efetivo para a preservação dos compostos bioativos analisados. Portanto, pode-se concluir que o emprego da liofilização é a alternativa mais adequada entre as avaliadas, para o aproveitamento da polpa de buriti na indústria de alimentos, uma vez que esse tratamento preservou todos os constituintes avaliados durante a estocagem.

Suplementação luminosa no tomateiro cultivado em diferentes sistemas de condução em ambiente protegido

O auto sombreamento das folhas posicionadas nas porções inferiores do dossel de plantas pode limitar a produtividade em cultivos tutorados. Assim, a produtividade do tomateiro pode ser aumentada por meio da suplementação luminosa posicionada no interior do dossel, técnica conhecida como interlighting. O sistema de condução do tomateiro também interfere na distribuição da radiação solar, além de afetar os tratos culturais, a competição intra e entre plantas e a relação entre as partes vegetativas e reprodutivas. Desta forma, o objetivo deste trabalho foi avaliar a influência do sistema de condução de minitomate cultivar \'Sweet Grape\' em diferentes números de hastes por planta (duas, três e quatro hastes) e da suplementação luminosa com módulos de LED na produtividade e qualidade dos frutos, na eficiência do uso de água e nutrientes, além da morfologia das plantas e fatores relacionados ao manejo cultural, em ambiente protegido nas condições climáticas do sudeste brasileiro. Ao longo do ciclo de cultivo foram avaliados os seguintes parâmetros: volume irrigado, pH, condutividade elétrica, porcentagem e volume da solução drenada pelos vasos. As colheitas foram realizadas semanalmente, a partir de 90 dias após o transplante. Os frutos colhidos foram classificados, contados e pesados para a obtenção do número e massa de frutos grandes, médios, pequenos, comercial, não comercial e total. Amostras de frutos e tecidos foliares foram coletadas em cinco períodos e avaliadas quanto ao teor de sólidos solúveis, pH, acidez titulável e concentração de ácido ascórbico nos frutos e teor de nutrientes nas folhas. Além disso, ao final do ciclo cultural, foram realizadas as medições dos seguintes parâmetros morfológicos nas plantas: comprimento de hastes, número de cachos normais e bifurcados por hastes e diâmetro apical, mediano e basal das hastes. A suplementação luminosa apresentou aumento no número e na massa de frutos grandes e médios, elevando a produtividade total em 12%. Plantas com duas e três hastes apresentaram maior acúmulo de massa total de frutos, porém plantas com três hastes apresentaram maior massa de frutos não comerciais, com redução na massa de frutos comerciais. A maior eficiência no uso de água e nutrientes foi alcançada em plantas cultivadas com duas hastes. Plantas com quatro hastes demandaram mais solução nutritiva comparada às plantas com duas e três hastes. Esta maior demanda de solução, acarretou em aumento da condutividade elétrica da solução drenada. Plantas com quatro hastes apresentaram maiores teores de sólidos solúveis nos frutos. A suplementação luminosa também resultou em aumento do teor de sólidos solúveis e ligeiro aumento no teor de ácido ascórbico nos frutos. A suplementação luminosa favoreceu o acúmulo de nitrogênio, fósforo e potássio nas folhas do tomateiro. Desta forma, conclui-se que a suplementação luminosa é uma estratégia de manejo tecnicamente viável nas condições climática estudada. O sistema de condução de haste afeta a produtividade e qualidade dos frutos do tomateiro. Plantas com duas hastes além de apresentar maior produtividade de frutos comerciais, mostrou-se a estratégia mais eficiente no uso da água e nutrientes.

Hydrogen Peroxide in Biocatalysis. A Dangerous Liaison

Hydrogen peroxide is a substrate or side-product in many enzyme-catalyzed reactions. For example, it is a side-product of oxidases, resulting from the re-oxidation of FAD with molecular oxygen, and it is a substrate for peroxidases and other enzymes. However, hydrogen peroxide is able to chemically modify the peptide core of the enzymes it interacts with, and also to produce the oxidation of some cofactors and prostetic groups (e.g., the hemo group). Thus, the development of strategies that may permit to increase the stability of enzymes in the presence of this deleterious reagent is an interesting target. This enhancement in enzyme stability has been attempted following almost all available strategies: site-directed mutagenesis (eliminating the most reactive moieties), medium engineering (using stabilizers), immobilization and chemical modification (trying to generate hydrophobic environments surrounding the enzyme, to confer higher rigidity to the protein or to generate oxidation-resistant groups), or the use of systems capable of decomposing hydrogen peroxide under very mild conditions. If hydrogen peroxide is just a side-product, its immediate removal has been reported to be the best solution. In some cases, when hydrogen peroxide is the substrate and its decomposition is not a sensible solution, researchers coupled one enzyme generating hydrogen peroxide “in situ” to the target enzyme resulting in a continuous supply of this reagent at low concentrations thus preventing enzyme inactivation. This review will focus on the general role of hydrogen peroxide in biocatalysis, the main mechanisms of enzyme inactivation produced by this reactive and the different strategies used to prevent enzyme inactivation caused by this “dangerous liaison”.

Catalytic wet peroxide oxidation: a route towards the application of hybrid magnetic carbon nanocomposites for the degradation of organic pollutants. A review

Several motivations have prompted the scientific community towards the application of hybrid magnetic carbon nanocomposites in catalytic wet peroxide oxidation (CWPO) processes. The most relevant literature on this topic is reviewed, with a special focus on the synergies that can arise from the combination of highly active and magnetically separable iron species with the easily tuned properties of carbon-based materials. These are mainly ascribed to increased adsorptive interactions, to good structural stability and low leaching levels of the metal species, and to increased regeneration and dispersion of the active sites, which are promoted by the presence of the carbon-based materials in the composites. The most significant features of carbon materials that may be further explored in the design of improved hybrid magnetic catalysts are also addressed, taking into consideration the experimental knowledge gathered by the authors in their studies and development of carbon-based catalysts for CWPO. The presence of stable metal impurities, basic active sites and sulphur-containing functionalities, as well as high specific surface area, adequate porous texture, adsorptive interactions and structural defects, are shown to increase the activity of carbon materials when applied in CWPO, while the presence of acidic oxygen-containing functionalities has the opposite effect.

Hybrid magnetic graphitic nanocomposites for catalytic wet peroxide oxidation applications

Hybrid magnetic graphitic nanocomposites (MGNC) prepared by inclusion of magnetite nanoparticles (obtained by coprecipitation) into an organic-organic self-assembly system, followed by calcination, revealed high activity for the catalytic wet peroxide oxidation (CWPO) of 4-nitrophenol solutions (5 g L-l), with pollutant removais up to 1245 mg g-' h-l being obtained when considering the mass ratio [pollutant]/[catalyst] =10. The stability of the MGNC catalyst against metal leaching was ascribed to the confinement effect of the carbon based material. These observations, together with the magnetically recoverable characteristics of MGNC, open new prospects for the wide use of this catalyst in highly efficient CWPO applications.

Carbon nanotubes as catalysts for wet peroxide oxidation: structure-reactivity relationships

Magnetic neat and N-doped carbon nanotubes with different properties have been synthesized by chemical vapour deposiüon and tested in the catalytic wet peroxide oxidation of 4-nitrophenol solutions (5 g L') at relatively mild operating conditions (atmospheric pressure, T = 50 °C, pH = 3)~using a catalyst load = 2.5 g L-' and [H202]o = 17.8 g L-1. The results demonstrate that the catalyst hydrophobicity/ hydrophilicity is a detenninant property in the CWPO reaction, since it affects the rate ofH202 decomposition. The controlled formation ofreactive radicais (HO* and HOO*) at hydrophobic surfaces avoids the formation of non-reactive species (02 and H20), increasing.

Core-shell nanocomposites prepared by hierarchical co-assembly: the role of the carbon shell in catalytic wet peroxide oxidation processes

The diffraction pattern of Fe3O4 (not shown) confirmed the presence of only one phase, corresponding to magnetite with a lattice parameter a = 8.357 Å and a crystallite size of 16.6 ± 0.2 nm. The diffraction pattern of MGNC (not shown) confirmed the presence of a graphitic phase, in addition to the metal phase, suggesting that Fe3O4 nanoparticles were successfully encapsulated within a graphitic structure during the synthesis of MGNC. The core-shell structure of MGNC is unequivocally demonstrated in the TEM micrograph shown in Fig. 1b. Characterization of the MGNC textural and surface chemical properties revealed: (i) stability up to 400 oC under oxidizing atmosphere; (ii) 27.3 wt.% of ashes (corresponding to the mass fraction of Fe3O4); (iii) a micro-mesoporous structure with a fairly well developed specific surface area (SBET = 330 m2 g-1); and (iv) neutral character (pHPZC = 7.1). In addition, the magnetic nature of MGNC (Fig. 2) is an additional advantage for possible implementation of in situ magnetic separation systems for catalyst recovery.

Metal-free catalysts derived from lignin for efficient wet peroxide oxidation

In this work, a wheat and hemp lignin (Sarkanda, Granit S.A.) has been used as raw material for the development of metal-free activated carbons. These materials were tested in the catalytic wet peroxide oxidation (CWPO) of 4-nitrophenol (4-NP; 5 g L-1) during 24 h experiments conducted at relatively mild operating conditions (p = 1 atm, t = 50 °C, pH = 3, catalyst load = 2.5 g L-1 and [H2O2]0 = 17.8 g L-1). First, the lignin was carbonized under N2 atmosphere followed by the activation of the obtained non-porous carbon (LG) under air atmosphere at different temperatures (150 to 350 ºC), leading to the generation of significant porosity.

Development of magnetic carbon xerogels for catalytic wet peroxide oxidation

Hybrid magnetic carbon composites have been recently proposed as the next step in the evolution of catalysts for catalytic wet peroxide oxidation (CWPO), with several synergistic effects arising from the combination of the high catalytic activity of metal species with the proven catalytic properties of carbon-based materials in CWPO [1]. Bearing this in mind, this work sought the development of novel magnetic carbon xerogels, composed by interconnected carbon microspheres with iron (Fe) and/or cobalt (Co) microparticles embedded in their structure. As inferred from the extensive characterization performed, materials with distinctive properties were obtained upon inclusion of different metal precursors during the sol-gel polymerization of resorcinol and formaldehyde, followed by thermal annealing.

Simulation of nutrient loss from soils due to rainfall acidity /

Bibliography: p. 43-44.

Rapid determination of aluminum in plutonium peroxide cake /

A carrier distillation spectrochemical method has been successfully adapted to direct reading spectrometry. Direct reading techniques have been developed for the rapid analyses of aluminum in plutonium peroxide to demonstrate the capability of direct reading for process impurity control.

Technical report: a technique for studying the dynamic behavior of the soil-plant system, with special reference to the effect of soil acidity and lime applications.

Bibliography: leaves 110-117.