Adição de superplastificante e anti-segregante à base de CMC em pastas de cimento para Poços de Petróleo

Oil well cementing materials consist of slurries of Special class Portland cement dispersed in water. Admixtures can be used to provide the necessary fluidity, so the material can be efficiently pumped down as well as penetrate porous rocks with controlled filter loss. Construction admixtures can be used to modify the properties of oil well cements provided they can withstand and hold their properties at the higher than ambient temperatures usually encountered in oil fields. In civil construction, superplasticizer play the role of dispersants that reduce the facto r of water cement improve mechanical properties and fluidity of the cement, whereas anti-segregation agents improve the workability of the slurry. In the present study, oil well cement slurries were produced adding both a dispersant and an anti-segregation agent conventionally used in Portland CPII-Z-32 RS cement aiming at materials for primary cementing and squeeze operations. Three basic aspects were evaluated: fluidity, filter loss and the synergetic effect of the admixtures at two temperatures, i.e., 27°C and 56°C, following API RP 10B practical recommendations. The slurries were prepared using admixture concentrations varying from 2.60 Kgf/m3 (0.02 gallft3) to 5.82 Kgf/m3 (0.045 galJft3) BWOC. The density of the slurries was set to 1.89 g/cm3 (15.8 Ib/gal). 0.30 to 0.60% BWOC of a CMC-based anti-segregation agent was added to the cement to control the filter loss. The results showed that the addition of anti-segregation at concentrations above 0.55% by weight of cement resulted in the increased viscosity of the folders in temperatures evaluated. The increasing the temperature of the tests led to a reduction in the performance of anti-segregation. At concentrations of 5.20 kgf/m3 (0,040 gallft3) and 5.82 Kgf/m3 (0,045 gal/ft 3) observed a better performance of the properties evaluated in the proposed system. At low temperature was observed instability in the readings of rheology for all concentrations of anti-segregation. Contents that increasing the concentration of anti¬-segregation is limited concentrations greater than 0.55 % BWOC of the CMC in temperature analyzed. The use of the system with CMC promoted a good performance against the properties evaluated. The principal function of anti¬-segregation was optimized with increasing concentration of superplasticizer, at temperatures above the 2rC. The study of the behaviour of systemic additives, resulting in slurries of cement, which can be optimized face studies of other intrinsic properties in oil fields

Concreto celular polimérico: influência na adição de resíduo de poliéster insaturado termofixo

This work addresses the production of lightweight concrete building elements, such as plates, prefabricated slabs for pre-molded and panels of fencing, presenting a singular concrete: the Lightweight Concrete, with special properties such low density and good strength, by means of the joint use of industrial waste of thermosetting unsaturated polyesters and biodegradable foaming agent, named Polymeric Lightweight Concrete. This study covered various features of the materials used in the composition of the Polymeric Lightweight Concrete, using a planning of factorial design 23, aiming at studying of the strength, production, dosage processes, characterization of mechanical properties and microstructural analysis of the transition zone between the light artificial aggregate and the matrix of cement. The results of the mechanical strength tests were analyzed using a computational statistics tool (Statistica software) to understand the behavior and obtain the ideal quantity of each material used in the formula of the Polymeric Lightweight Concrete. The definition of the ideal formula has the purpose of obtaining a material with the lowest possible dry density and resistance to compression in accordance with NBR 12.646/92 (≥ 2.5 MPa after 28 days). In the microstructural characterization by scanning electron microscopy it was observed an influence of the materials in the process of cement hydration, showing good interaction between the wrinkled face of the residue of unsaturated polyesters thermosetting and putty and, consequently, the final strength. The attaining of an ideal formula, given the Brazilian standards, the experimental results obtained in the characterization and comparison of these results with conventional materials, confirmed that the developed Polymeric Lightweight Concrete is suitable for the production of building elements that are advantageous for construction

Estudo da molhabilidade de tecidos 100% poliéster tratados em plasma N2/O2 em função do seu envelhecimento natural

This work reports the influence of the poly (ethylene terephthalate) textile surface modification by plasmas of O2 and mixtures (N2 + O2), on their physical and chemical properties. The treatment was carried out in a vacuum chamber. Some parameters remained constant during all treatment, such as: Voltage 470 V; Pressure 1,250 Mbar; Current: 0, 10 A and gas flow: 10 cm3/min. Other parameters, such as working gas composition and treatment time, were modified as the following: to the O2 plasma modified samples only the treatment time was changed (10, 20, 30, 40, 50 and 60 minutes). To the plasma with O2 and N2 only the chemical concentrations were changed. Through Capillary tests (vertical) an increase in textile wettability was observed as well as its influence on aging time and its consequence on wettability. The surface functional groups created after plasma treatments were investigated using X-ray Photoelectron Spectroscopy (XPS). The surface topography was examined by scanning electron microscope (SEM)

Estimação e compensação de não linearidades inerentes aos atuadores dos processos industriais

The oscillations presents in control loops can cause damages in petrochemical industry. Canceling, or even preventing such oscillations, would save up to large amount of dollars. Studies have identified that one of the causes of these oscillations are the nonlinearities present on industrial process actuators. This study has the objective to develop a methodology for removal of the harmful effects of nonlinearities. Will be proposed an parameter estimation method to Hammerstein model, whose nonlinearity is represented by dead-zone or backlash. The estimated parameters will be used to construct inverse models of compensation. A simulated level system was used as a test platform. The valve that controls inflow has a nonlinearity. Results and describing function analysis show an improvement on system response

Análise de um queimador infravermelho funcionando com combustível híbrido : GLP/Bio-óleo

Biomass is considered the largest renewable energy source that can be used in an environmentally sustainable. From the pyrolysis of biomass is possible to obtain products with higher energy density and better use properties. The liquid resultant of this process is traditionally called bio-oil. The use of infrared burners in industrial applications has many advantages in terms of technical-operational, for example, uniformity in the heat supply in the form of radiation and convection, with a greater control of emissions due to the passage of exhaust gases through a macroporous ceramic bed. This paper presents a commercial infrared burner adapted with an ejector proposed able to burn a hybrid configuration of liquefied petroleum gas (LPG) and bio-oil diluted. The dilution of bio-oil with absolute ethanol aimed to decrease the viscosity of the fluid, and improving the stability and atomization. It was introduced a temperature controller with thermocouple modulating two stages (low heat / high heat), and solenoid valves for fuels supply. The infrared burner has been tested, being the diluted bio-oil atomized, and evaluated its performance by conducting energy balance. The method of thermodynamic analysis to estimate the load was used an aluminum plate located at the exit of combustion gases and the distribution of temperatures measured by thermocouples. The dilution reduced the viscosity of the bio-oil in 75.4% and increased by 11% the lower heating value (LHV) of the same, providing a stable combustion to the burner through the atomizing with compressed air and burns combined with LPG. Injecting the hybrid fuel there was increase in the heat transfer from the plate to the environment in 21.6% and gain useful benefit of 26.7%, due to the improved in the efficiency of the 1st Law of Thermodynamics of infrared burner

Compressão de Imagens Usando a Função de Peano e a Transformada Wavelet 1D

In this work, spoke about the importance of image compression for the industry, it is known that processing and image storage is always a challenge in petrobrás to optimize the storage time and store a maximum number of images and data. We present an interactive system for processing and storing images in the wavelet domain and an interface for digital image processing. The proposal is based on the Peano function and wavelet transform in 1D. The storage system aims to optimize the computational space, both for storage and for transmission of images. Being necessary to the application of the Peano function to linearize the images and the 1D wavelet transform to decompose it. These applications allow you to extract relevant information for the storage of an image with a lower computational cost and with a very small margin of error when comparing the images, original and processed, ie, there is little loss of quality when applying the processing system presented . The results obtained from the information extracted from the images are displayed in a graphical interface. It is through the graphical user interface that the user uses the files to view and analyze the results of the programs directly on the computer screen without the worry of dealing with the source code. The graphical user interface, programs for image processing via Peano Function and Wavelet Transform 1D, were developed in Java language, allowing a direct exchange of information between them and the user

Reforma a seco de metano com catalisadores Ni/MCM-41 sintetizados a partir de fontes alternativas de sílica

The production of synthesis gas has received renewed attention due to demand for renewable energies to reduce the emissions of gases responsible for enhanced greenhouse effect. This work was carried out in order to synthesize, characterize and evaluate the implementation of nickel catalysts on MCM-41 in dry reforming reactions of methane. The mesoporous molecular sieves were synthesized using as silica sources the tetraethyl orthosilicate (TEOS) and residual glass powder (PV). The sieves were impregnated with 10% nickel to obtain the metallic catalysts (Ni/MCM-41). These materials were calcined and characterized by Thermogravimetric Analysis (TG), Infrared spectroscopy (FTIR), X-ray Diffraction (XRD), Temperature-Programmed Reduction (TPR) and N2 Adsorption/Desorption isotherms (BET/BJH). The catalytic properties of the samples were evaluated in methane dry reforming with CO2 in order to produce synthesis gas to be used in the petrochemical industry. The materials characterized showed hexagonal structure characteristic of mesoporous material MCM-41 type, being maintained after impregnation with nickel. The samples presented variations in the specific surface area, average volume and diameter of pores based on the type of interaction between the nickel and the mesoporous support. The result of the the catalytic tests showed conversions about 91% CO2, 86% CH4, yelds about 85% CO and 81% H2 to Ni/MCM-41_TEOS_C, and conversions about 87% CO2, 82% CH4, yelds about 70% CO and 59% H2 to Ni/MCM-41_PV_C. The similar performance confirms that the TEOS can be replaced by a less noble materials

Nova técnica para obtenção de fraturas com altíssima condutividade em poços de petróleo

Increase hydrocarbons production is the main goal of the oilwell industry worldwide. Hydraulic fracturing is often applied to achieve this goal due to a combination of attractive aspects including easiness and low operational costs associated with fast and highly economical response. Conventional fracturing usually involves high-flowing high-pressure pumping of a viscous fluid responsible for opening the fracture in the hydrocarbon producing rock. The thickness of the fracture should be enough to assure the penetration of the particles of a solid proppant into the rock. The proppant is driven into the target formation by a carrier fluid. After pumping, all fluids are filtered through the faces of the fracture and penetrate the rock. The proppant remains in the fracture holding it open and assuring high hydraulic conductivity. The present study proposes a different approach for hydraulic fracturing. Fractures with infinity conductivity are formed and used to further improve the production of highly permeable formations as well as to produce long fractures in naturally fractured formations. Naturally open fractures with infinite conductivity are usually encountered. They can be observed in rock outcrops and core plugs, or noticed by the total loss of circulation during drilling (even with low density fluids), image profiles, pumping tests (Mini-Frac and Mini Fall Off), and injection tests below fracturing pressure, whose flow is higher than expected for radial Darcian ones. Naturally occurring fractures are kept open by randomly shaped and placed supporting points, able to hold the faces of the fracture separate even under typical closing pressures. The approach presented herein generates infinite conductivity canal held open by artificially created parallel supporting areas positioned both horizontally and vertically. The size of these areas is designed to hold the permeable zones open supported by the impermeable areas. The England & Green equation was used to theoretically prove that the fracture can be held open by such artificially created set of horizontal parallel supporting areas. To assess the benefits of fractures characterized by infinite conductivity, an overall comparison with finite conductivity fractures was carried out using a series of parameters including fracture pressure loss and dimensionless conductivity as a function of flow production, FOI folds of increase, flow production and cumulative production as a function of time, and finally plots of net present value and productivity index

Simulação do escoamento monofásico em um estágio de uma bomba centrífuga utilizando técnicas de fluidodinâmica computacional

Oil production and exploration techniques have evolved in the last decades in order to increase fluid flows and optimize how the required equipment are used. The base functioning of Electric Submersible Pumping (ESP) lift method is the use of an electric downhole motor to move a centrifugal pump and transport the fluids to the surface. The Electric Submersible Pumping is an option that has been gaining ground among the methods of Artificial Lift due to the ability to handle a large flow of liquid in onshore and offshore environments. The performance of a well equipped with ESP systems is intrinsically related to the centrifugal pump operation. It is the pump that has the function to turn the motor power into Head. In this present work, a computer model to analyze the three-dimensional flow in a centrifugal pump used in Electric Submersible Pumping has been developed. Through the commercial program, ANSYS® CFX®, initially using water as fluid flow, the geometry and simulation parameters have been defined in order to obtain an approximation of what occurs inside the channels of the impeller and diffuser pump in terms of flow. Three different geometry conditions were initially tested to determine which is most suitable to solving the problem. After choosing the most appropriate geometry, three mesh conditions were analyzed and the obtained values were compared to the experimental characteristic curve of Head provided by the manufacturer. The results have approached the experimental curve, the simulation time and the model convergence were satisfactory if it is considered that the studied problem involves numerical analysis. After the tests with water, oil was used in the simulations. The results were compared to a methodology used in the petroleum industry to correct viscosity. In general, for models with water and oil, the results with single-phase fluids were coherent with the experimental curves and, through three-dimensional computer models, they are a preliminary evaluation for the analysis of the two-phase flow inside the channels of centrifugal pump used in ESP systems

Enraizamento de estacas de Camellia sinensis L. em função da época de coleta de ramos, genótipos e ácido indolbutírico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Apitidão funcional e comportamentos relacionados à saúde em mulheres idosas do município de Jequié-BA

The identification of the factors that interfere in the decline of functional conditions is useful in the planning of actions addressing the improvement in the conditions of the lives of elderly people. The purpose of this investigation was to analyze the relationship between social demographics and health aspects of the functional condition in elderly women of low income of the Brazilian northeast. This crosssectional study involved a representative sample of 222 women with an average age of 70 years (± 7.1), belonging to coexisting groups and that were resident in the urban area of the municipal district of Jequié /Bahia. In order to achieve this objective, a battery of physical tests of functional aptitude was carried out previously tested in pilot study, anthropometric measurements collected with a comparison of the measures referred to the reported weight and height as well as the application of an interview with questions containing subjects related to social demographic variables, clinical conditions and health, physical conditions and behaviors. Descriptive statistics Proceedings (frequency, average, standard deviation and percent distribution) were used for statistic analysis, and the calculation of the respective odds ratio by binary logistics regression, for the analysis of factors hierarchically grouped; p<0.05. The prevalence of 56% (n=122) of women considered with moderated or serious type of functional limitations was found, In which from multi-varied hierarchical analysis, significant association was verified with the age group over 80 years (p=0.02), conditions of widowhood (p=0.04), presence of arterial hypertension (p=0.001), and physical inactivity during leisure time (p=0.03). On the other hand for functional incapacities the prevalence was of 46.8% (n=104) being associated to the increase of the age (p=0.01), hospitalization (p=0.02), absence of physical activities along their lives (p=0.001) and the occurrence of alterations in the cognitive function (p=0.001). The normative table for the parameters of physical fitness generated conducive to health professionals in the diagnosis of health conditions and the prescription of physical exercises. The identified characteristics that are associated with the functional limitations / functional incapacities suggest a complex causal net in the determination of the functional condition in elderly women. However, actions addressed to the incentive of the practice of physical activities in the leisure time and the preservation of the cognitive function can contribute to a life with more quality for these people. This research was multidisciplinary approach to involve elements of psychology, nutrition and Physical Education in the elucidation of the object of study related to the functional condition of elderly women

Função autonômica em pacientes portadores de lipodistrofia generalizada congênita - sindrome de berardinelli - SEIP

A Síndrome de Berardinelli-Seip ou Lipodistrofia Generalizada Congênita (LGC) é uma doença rara, com transmissão autossômica recessiva, caracterizada principalmente pela ausência quase total de tecido adiposo. Os pacientes afetados apresentam resistência a insulina, dislipidemia e hipertensão arterial. Estudos têm evidenciado que estas alterações metabólicas interferem na modulação autonômica para o nó sinusal. O principal objetivo deste estudo foi investigar a modulação autonômica em pacientes portadores de LGC, através da variabilidade de freqüência cardíaca (VFC), pelo método linear de domínio de tempo na Eletrocardiografia Dinâmica de 24 horas e estabelecer um critério relativamente simples, não invasivo, para diagnóstico de disfunção autonômica nestes pacientes. Participou voluntariamente deste estudo transversal, um grupo de pacientes portadores de LGC (n=18) na faixa etária de 9,3 a 39,8 anos (21,3 ± 8,3) cuja variabilidade de freqüência cardíaca foi comparada com um grupo de pacientes controles (n=19) com idade de 9,3 a 39,1 anos (21,4 ± 7,8). Todos os voluntários foram submetidos à avaliação clínica, laboratorial, antropométrica e análise de VFC no domínio de tempo através de eletrocardiografia dinâmica de 24 horas. Para análise dos dados relativos aos índices temporais de VFC foram utilizados o MeanRR, SSDN e rMSSD. Pacientes com LGC apresentavam aumento da pressão arterial comparados com indivíduos do grupo controle (sistólica, 131,1 vs 106,3 mmHg, p<0,05); diastólica, 85,0 vs 68,2 mmHg, p<0,05) e 10 tinham critérios para diagnóstico de Hipertensão Arterial e Hipertrofia do Ventrículo Esquerdo. Os níveis de glicose, triglicerídeos, colesterol e HOMA-R eram elevados e 12 pacientes tinham critérios para diabetes mellitus tipo 2. Comparado com os controles, pacientes com LGC tinham diminuição dos índices MeanRR (639,8 vs 780,5 ms, p<0,001), SDNN (79,2 vs 168,5 ms, p<0,001), e rMSSD (15,8 vs 59,6 ms, p<0,001). Em pacientes com LGC, a redução da VFC foi independente de distúrbios metabólicos e hemodinâmicos. Os resultados de nosso experimento indicam que pacientes com LGC apresentavam modulação autonômica anormal caracterizada pelo aumento da freqüência cardíaca e pronunciada redução da VFC, independente de distúrbios metabólicos e hemodinâmicos observados nesta síndrome. O caráter multidisciplinar desse estudo fica contemplado pela interação de profissionais de diversas áreas como: cardiologia, endocrinologia, metabolismo, neurologia, nutrição, etc

Elaboração e validade do teste de rastreio de doença da Alzheimer com provérbios (TRDAP) para indivíduos a partir de sessenta anos

A escassez de instrumentos para a avaliação e a triagem da doença de Alzheimer, (DA), notadamente denominados de rastreio, com características de padronização e validados para o Nordeste, motivou este Estudo. Visando à triagem de uma etapa mais leve da doença e encaminhamento precoce ao tratamento multidisciplinar foi elaborado o Teste de Rastreio da Doença de Alzheimer com Provérbios (TRDAP), a partir de um Jogo de Memória de Provérbios, construído como recurso terapêutico ocupacional. Está composto de três etapas conforme a função neuropsicológica avaliada, a A (memória de curto prazo), B (funções executivas e linguagem) e C (memória episódica), além do reconhecimento de provérbios. O Estudo foi realizado em uma amostra de conveniência, com 91 idosos (28 DA e 63 controles), a partir de 60 anos, com um ou mais anos de escolaridade. Foram controladas as variáveis, como doenças intercorrentes ou déficits sensoriais que pudessem comprometer o desempenho dos pacientes, nos testes. O protocolo constou de oito testes selecionados por especialistas: Miniexame do Estado Mental (para validade convergente), Escala de Depressão Geriátrica EDG (validade discriminante), Lista de Palavras, Fluência Verbal, Span de Dígitos, Figura Neuropsi, Teste do Relógio, Atividade de Vida Diária e Instrumental. Os resultados confirmaram a validade de construto convergente e discriminante, assim como a relação significativa (p<0,005) com todos os testes, exceto com o EDG. Quanto à validade concorrente, não houve discordância com o critério da avaliação médica observou-se consistência interna aceitável, conferindo confiabilidade no instrumento, o que não ocorreu com MEEM. Tais resultados permitem afirmar que o TRDAP possui características psicométricas, adequadas ao rastreio da fase leve da DA para população estudada

Aptidão física relacionada à saúde de escolares Norte- Rio-Grandenses

O sedentarismo é cada vez mais acentuado entre os adolescentes em todo o mundo. Objetivou-se neste estudo analisar o estado nutricional e a aptidão física de escolares norte-rio-grandenses. Participaram 2065 sujeitos, selecionados aleatoriamente (Masc = 1066, Fem = 999) (Natal n=1158; Mossoró n= 312; Lajes n= 231), divididos em três grupos etários pelos estágios maturacionais: 10 a 12 anos, 13 a 14 anos e _ 15 anos. Foi avaliada a composição corporal (IMC, dobras cutâneas tríceps e subescapular); o hábito alimentar (questionário de prevalência do consumo por grupo alimentar); o índice de atividade física (questionário Baeck) e o nível de aptidão física (testes do salto em distância, flexibilidade, resistência abdominal e cardiovascular). Utilizando-se a estatística descritiva, testes de médias pela análise dos intervalos de confiança, o teste de Kruskall-Wallis, teste t, o Qui2 e o coeficiente de contingência. Encontraram-se diferenças significativas com p < 0001 na distribuição do índice de massa corporal (n = 1701); Região Leste Potiguar (RLP) com excesso de peso e obesidade de 16,8 % e 15,2 %, a Região Oeste 16,3% e 9,6 % e a Região Central 10,4 % e 3,9 %, com as escolas privadas contribuindo significativamente na prevalência dessas variáveis nas RLP e ROP com p < 0,003 e p < 0,001 respectivamente. O hábito alimentar demonstrou que 98,3% dos sujeitos consomem alimentos do grupo das massas 98,3%; cereais 97,7%; laticínios 94,7%; frutas 92,3%; gorduras 88,3% e as hortaliças 61,6%, não havendo diferenças significativas no consumo alimentar entre o tipo de escolas e gênero (n = 300). No índice de atividade física habitual há diferenças entre esses respectivos extratos: 2,65±0,78 e 2,81±0,80 (p < 0,014) e 2,89±0,82 e 2,57±0,78 (p < 0,001), com as práticas de atividades esportivas, programas de exercícios físicos e lazer ativo mais significativo em escolas privadas 2,85 ± 1,06 e 3,37±1,26 (p < 0,001) em prol do sexo masculino com 3,47±1,24 e 2,75±1,03 (p <0,001). Resistência abdominal ( =19) e força de membros inferiores ( =128,5 cm) foram classificadas como muito fraco , a flexibilidade ( =26,9 cm) razoável e resistência geral ( =1439 m) como bom . Conclui-se que o hábito alimentar e o baixo índice de atividade física habitual influenciam negativamente os índices da aptidão física relacionada à saúde dos escolares, com menor incidência em instituições privadas em função das práticas esportivas. Este estudo apresenta relação de interface multidisciplinar, tendo o seu conteúdo uma aplicação nos campos da Medicina, Nutrição e Educação Física

Avaliação neuropsicológica de crianças com hemiparesia congênita e adquirida

A hemiparesia consiste no déficit da força muscular, com consequente debilidade na mão e no pé, afetando um dos lados do corpo. A literatura mostra poucos estudos enfocando detalhadamente as funções cognitivas e emocionais de crianças afetadas por essa condição neurológica. Este estudo teve como objetivo realizar avaliação neuropsicológica de 23 crianças e adolescentes, de ambos os gêneros, com idades entre 5 anos e 4 meses e 16 anos e 6 meses, com hemiparesia congênita e adquirida. Aplicou-se uma bateria de testes específica para avaliação de funções cognitivas superiores incluindo processos intelectuais, atenção, função perceptiva, função motora, praxias, gnosias, linguagem, memória e função visuomotora. Em relação aos aspectos emocionais, foi usado o teste do desenho da figura humana, visando-se a avaliação da percepção da imagem corporal dos pacientes. Os resultados mostraram que a hemiparesia da criança conduz a déficits em funções neuropsicológicas importantes, além de déficit motor e alterações na esfera emocional, mais precisamente aquelas relacionadas com a representação da imagem corporal. A abrangência multidisciplinar, envolvendo a neurologia pediátrica e a psicologia, engrandeceu o trabalho, referendando os resultados obtidos em todos os seus aspectos