The survival, growth and carcase characteristics of crossbred beef cattle in Tanzania

Sires of seven Bos taurus beef breeds were mated with Bos indicus Boran cows at two sites, one near sea level and the other at about 1000 m altitude, and over three years. Purebred Boran calves provided controls for comparisons between sire breeds for growth to 4 years of age, mortality and carcase characteristics in a range environment where all the animals were kept under a similar management regime. Numerous sire breed x site, sire breed x year of birth and site x year of birth interactions were established. Mortality was high, but there was no significant sire breed effect, although purebred Borans had a higher survival than crossbred calves. There was no significant difference between genotypes in birth weight. Generally, Bos taurus cross steers achieved greater live weight gains and heavier carcase weights at 4 years of age than did purebred Borans. Limousin-cross steers had significantly (p<0.05) less fat in the tenth rib sample joint than any of the other genotypes. A productivity index that combined calf survival and carcase weight indicated that the Chianina crosses were more productive than any other genotype at either site. Purebred Borans were more productive than all the Bos taurus crossbreds with the exception of the Chianina crosses at site 1, but were only superior to the Limousin crosses at site 2, which was at the higher altitude. When lean meat yield was introduced into the productivity index, the Boran purebreds were the least productive at site 2.

Integrated optics for nulling interferometry in the thermal infrared

Modal filtering is based on the capability of single-mode waveguides to transmit only one complex amplitude function to eliminate virtually any perturbation of the interfering wavefronts, thus making very high rejection ratios possible in a nulling interferometer. In the present paper we focus on the progress of Integrated Optics in the thermal infrared [6-20 mu m] range, one of the two candidate technologies for the fabrication of Modal Filters, together with fiber optics. In conclusion of the European Space Agency's (ESA) "Integrated Optics for Darwin" activity, etched layers of clialcogenide material deposited on chalcogenide glass substrates was selected among four candidates as the technology with the best potential to simultaneously meet the filtering efficiency, absolute and spectral transmission, and beam coupling requirements. ESA's new "Integrated Optics" activity started at mid-2007 with the purpose of improving the technology until compliant prototypes can be manufactured and validated, expectedly by the end of 2009. The present paper aims at introducing the project and the components requirements and functions. The selected materials and preliminary designs, as well as the experimental validation logic and test benches are presented. More details are provided on the progress of the main technology: vacuum deposition in the co-evaporation mode and subsequent etching of chalcogenide layers. In addition., preliminary investigations of an alternative technology based on burying a chalcogenide optical fiber core into a chalcogenide substrate are presented. Specific developments of anti-reflective solutions designed for the mitigation of Fresnel losses at the input and output surface of the components are also introduced.

Comparison of subspace and ARX models of a waveguide's terahertz transient response after optimal wavelet filtering

A quasi-optical deembedding technique for characterizing waveguides is demonstrated using wide-band time-resolved terahertz spectroscopy. A transfer function representation is adopted for the description of the signal in the input and output port of the waveguides. The time-domain responses were discretized and the waveguide transfer function was obtained through a parametric approach in the z-domain after describing the system with an AutoRegressive with eXogenous input (ARX), as well as with a state-space model. Prior to the identification procedure, filtering was performed in the wavelet domain to minimize both signal distortion, as well as the noise propagating in the ARX and subspace models. The optimal filtering procedure used in the wavelet domain for the recorded time-domain signatures is described in detail. The effect of filtering prior to the identification procedures is elucidated with the aid of pole-zero diagrams. Models derived from measurements of terahertz transients in a precision WR-8 waveguide adjustable short are presented.

Thalassaemia: its diagnosis and interpretation in past skeletal populations

The diagnosis of thalassaemia in archaeological populations has long been hindered by a lack of pathogonomic features, and the non-specific nature of cribra orbitalia and porotic hyperostosis. In fact, clinical research has highlighted more specific diagnostic criteria for thalassaemia major and intermedia based on changes to the thorax (‘rib-within-a-rib’ and costal osteomas). A recent re-examination of 364 child skeletons from Romano-British Poundbury Camp, Dorset revealed children with general ‘wasting’ of the bones and three children who demonstrated a variety of severe lesions (e.g. zygomatic bone and rib hypertrophy, porotic hyperostosis, rib lesions, osteopenia and pitted diaphyseal shafts) that are inconsistent with dietary deficiency alone, and more consistent with a diagnosis of genetic anaemia. Two of these children displayed rib lesions typical of those seen in modern cases of thalassaemia. The children of Poundbury Camp represent the first cases of genetic anaemia identified in a British archaeological population. As thalassaemia is a condition strongly linked to Mediterranean communities, the presence of this condition in a child from England, found within a mausoleum, suggests that they were born to wealthy immigrant parents living in this small Roman settlement in Dorset. This paper explores the diagnostic criteria for genetic anaemia in the archaeological literature and what its presence in ancient populations can contribute to our knowledge of past human migration.

Integrated optics for nulling interferometry in the thermal infrared: progress and recent achievements

The search for Earth-like exoplanets, orbiting in the habitable zone of stars other than our Sun and showing biological activity, is one of the most exciting and challenging quests of the present time. Nulling interferometry from space, in the thermal infrared, appears as a promising candidate technique for the task of directly observing extra-solar planets. It has been studied for about 10 years by ESA and NASA in the framework of the Darwin and TPF-I missions respectively. Nevertheless, nulling interferometry in the thermal infrared remains a technological challenge at several levels. Among them, the development of the "modal filter" function is mandatory for the filtering of the wavefronts in adequacy with the objective of rejecting the central star flux to an efficiency of about 105. Modal filtering takes benefit of the capability of single-mode waveguides to transmit a single amplitude function, to eliminate virtually any perturbation of the interfering wavefronts, thus making very high rejection ratios possible. The modal filter may either be based on single-mode Integrated Optics (IO) and/or Fiber Optics. In this paper, we focus on IO, and more specifically on the progress of the on-going "Integrated Optics" activity of the European Space Agency.

Fabrication and characterization of micromachined rectangular waveguide components for use at millimeter-wave and terahertz frequencies

The fabrication and characterization of micromachined reduced-height air-filled rectangular waveguide components suitable for integration is reported in this paper. The lithographic technique used permits structures with heights of up to 100 μm to be successfully constructed in a repeatable manner. Waveguide S-parameter measurements at frequencies between 75-110 GHz using a vector network analyzer demonstrate low loss propagation in the TE10 mode reaching 0.2 dB per wavelength. Scanning electron microscope photographs of conventional and micromachined waveguides show that the fabrication technique can provide a superior surface finish than possible with commercially available components. In order to circumvent problems in efficiently coupling free-space propagating beams to the reduced-height G-band waveguides, as well as to characterize them using quasi-optical techniques, a novel integrated micromachined slotted horn antenna has been designed and fabricated, E-, H-, and D-plane far-field antenna pattern measurements at different frequencies using a quasi-optical setup show that the fabricated structures are optimized for 180-GHz operation with an E-plane half-power beamwidth of 32° elevated 35° above the substrate, a symmetrical H-plane pattern with a half-power beamwidth of 23° and a maximum D-plane cross-polar level of -33 dB. Far-field pattern simulations using HFSS show good agreement with experimental results.

Active micromachined integrated terahertz circuits

Schottky barrier diodes have been integrated into on-chip rectangular waveguides. Two novel techniques have been developed to fabricate diodes with posts suitable for integration into waveguides. One technique produces diodes with anode diameters of the order of microns with post heights from 90 to 125 microns and the second technique produces sub-micron anodes with post heights around 20 microns. A method has been developed to incorporate these structures into a rectangular waveguide and provide a top contact onto the anode which could be used as an I.F. output in a mixer circuit. Devices have been fabricated and D.C. characterized.

A new micro-machined millimeter-wave and terahertz snap-together rectangular waveguide technology

A novel technique for micro-machining millimeter and submillimeter-wave rectangular waveguide components is reported. These are fabricated in two halves which simply snap together, utilizing locating pins and holes, and are physically robust, and cheap, and easy to manufacture. In addition, S-parameter measurements on these structures are reported for the first time and display lower loss than previously reported micro-machined rectangular waveguides.

Wavelet filtered modelling applied to measurements of a waveguide's THz time domain response

A quasi-optical de-embedding technique for characterizing waveguides is demonstrated using wideband time-resolved terahertz spectroscopy. A transfer function representation is adopted for the description of the signal in the input and output port of the waveguides. The time domain responses were discretised and the waveguide transfer function was obtained through a parametric approach in the z-domain after describing the system with an ARX as well as with a state space model. Prior to the identification procedure, filtering was performed in the wavelet domain to minimize signal distortion and the noise propagating in the ARX and subspace models. The model identification procedure requires isolation of the phase delay in the structure and therefore the time-domain signatures must be firstly aligned with respect to each other before they are compared. An initial estimate of the number of propagating modes was provided by comparing the measured phase delay in the structure with theoretical calculations that take into account the physical dimensions of the waveguide. Models derived from measurements of THz transients in a precision WR-8 waveguide adjustable short will be presented.

Effects of dietary polyunsaturated fatty acid supplementation on fatty acid composition in muscle and subcutaneous adipose tissue of lambs

Lambs (n = 48) were used in a 2 × 2 factorial arrangement of treatments to evaluate effects of inclusion of oil containing PUFA in high-concentrate diets (with or without) and duration of oil supplementation (pre- vs. postweaning) on CLA concentration of muscle and adipose tissue. Lambs were fed preweaning creep diets (with or without oil) corresponding to the dietary lactation treatment diet (with or without oil) of the dam. Dams blocked by lambing date and rearing type were randomly assigned to 1 of 2 lactation dietary treatments with or without oil supplementation. Creep diets contained approximately 70% concentrate and 30% roughage and were provided to lambs for ad libitum intake. At weaning (58.7 ± 2.5 d of age), lambs (n = 48) were randomly assigned within preweaning treatment groups to 1 of 2 postweaning dietary treatments (with or without oil) and 16 pens in a randomized block design, blocked by sex and BW. Postweaning diets were formulated to contain approximately 80% concentrate and 20% roughage and were fed once daily for ad libitum intake. Soybean and linseed oil (2:1, respectively) replaced ground corn and provided 3% additional fat in pre- and postweaning diets. Lambs were slaughtered at 60.3 ± 4.2 kg of BW. A subcutaneous fat (SQ) sample was obtained within 1 h postmortem and a LM sample at the 12th rib was obtained 24 h postmortem, and both were analyzed for fatty acid profile. Feedlot performance and carcass measurements were not affected (P ≥ 0.26) by oil supplementation. Total CLA content of LM and SQ was not affected (P ≥ 0.08) by oil supplementation pre- or postweaning, but trans-10, cis-12 CLA was greater (P = 0.02) in SQ from lambs supplemented with oil postweaning. Total PUFA content in LM was greater (P = 0.02) in lambs supplemented with oil pre- or postweaning as a result of increased concentrations of 18:2cis-9, cis-12 and longer chain PUFA. Conversely, pre- and postweaning oil supplementation resulted in less (P = 0.04) MUFA content in LM. Only postweaning oil supplementation increased (P = 0.001) SQ PUFA content. Feeding oils containing PUFA to lambs pre- and postweaning did not increase CLA content of muscle, whereas postweaning oil supplementation minimally increased CLA concentration of SQ fat. Inclusion of soybean and linseed oil in pre- and postweaning diets increased total PUFA content of SQ fat and muscle tissue without adversely affecting growth performance or carcass characteristics.

Eigenvalues of a one-dimensional Dirac operator pencil

We study the spectrum of a one-dimensional Dirac operator pencil, with a coupling constant in front of the potential considered as the spectral parameter. Motivated by recent investigations of graphene waveguides, we focus on the values of the coupling constant for which the kernel of the Dirac operator contains a square integrable function. In physics literature such a function is called a confined zero mode. Several results on the asymptotic distribution of coupling constants giving rise to zero modes are obtained. In particular, we show that this distribution depends in a subtle way on the sign variation and the presence of gaps in the potential. Surprisingly, it also depends on the arithmetic properties of certain quantities determined by the potential. We further observe that variable sign potentials may produce complex eigenvalues of the operator pencil. Some examples and numerical calculations illustrating these phenomena are presented.

Impact of vegetation and preferential source areas on global dust aerosol: results from a model study

[1] We present a model of the dust cycle that successfully predicts dust emissions as determined by land surface properties, monthly vegetation and snow cover, and 6-hourly surface wind speeds for the years 1982–1993. The model takes account of the role of dry lake beds as preferential source areas for dust emission. The occurrence of these preferential sources is determined by a water routing and storage model. The dust source scheme also explicitly takes into account the role of vegetation type as well as monthly vegetation cover. Dust transport is computed using assimilated winds for the years 1987–1990. Deposition of dust occurs through dry and wet deposition, where subcloud scavenging is calculated using assimilated precipitation fields. Comparison of simulated patterns of atmospheric dust loading with the Total Ozone Mapping Spectrometer satellite absorbing aerosol index shows that the model produces realistic results from daily to interannual timescales. The magnitude of dust deposition agrees well with sediment flux data from marine sites. Emission of submicron dust from preferential source areas are required for the computation of a realistic dust optical thickness. Sensitivity studies show that Asian dust source strengths are particularly sensitive to the seasonality of vegetation cover.

Bmp4 regulates chick Ebf2 and Ebf3 gene expression in somite development

The chick Early B-cell Factor-2 and 3 (cEbf2 and cEbf3) genes are members of EBF family of helix loop helix transcription factors. The expression, regulation and importance of these genes have been extensively studied in lymphatic, nervous and muscular tissues. Recently, a new role for some members of EBF in bone development has been investigated. However, the expression profile and regulation in the axial skeleton precursor, the somite, have yet to be elucidated. Therefore, this study was aimed to investigate the expression and regulation of cEbf2 and cEbf3 genes in the developing chick embryo somite from HH4 to HH28. The spatiotemporal expression study revealed predominant localization of cEbf2 and cEbf3 in the lateral sclerotomal domains and later around vertebral cartilage anlagen of the arch and the proximal rib. Subsequently, microsurgeries, ectopic gene expression experiments were performed to analyze which tissues and factors regulate cEbf2 and cEbf3 expression. Lateral barriers experiments indicated the necessity for lateral signal(s) in the regulation of cEbf2 and cEbf3 genes. Results from tissue manipulations and ectopic gene expression experiments indicate that lateral plate-derived Bmp4 signals are necessary for the initiation and maintenance of cEbf2 and cEbf3 genes in somites. In conclusion, cEbf2 and cEbf3 genes are considered as lateral sclerotome markers which their expression is regulated by Bmp4 signals from the lateral plate mesoderm.

Thomas-Fermi ground state of dipolar fermions in a circular storage ring

Recent developments in the field of ultracold gases has led to the production of degenerate samples of polar molecules. These have large static electric-dipole moments, which in turn causes the molecules to interact strongly. We investigate the interaction of polar particles in waveguide geometries subject to an applied polarizing field. For circular waveguides, tilting the direction of the polarizing field creates a periodic inhomogeneity of the interparticle interaction. We explore the consequences of geometry and interaction for stability of the ground state within the Thomas-Fermi model. Certain combinations of tilt angles and interaction strengths are found to preclude the existence of a stable Thomas-Fermi ground state. The system is shown to exhibit different behavior for quasi-one-dimensional and three-dimensional trapping geometries.

Relações planta-animal num sistema de integração lavoura-pecuária

Este trabalho buscou estudar um sistema de integração lavoura-pecuária com diferentes alturas de pastos, no período de inverno, e seus reflexos sobre a dinâmica da pastagem e o desempenho animal. O experimento foi conduzido em uma pastagem de aveia + azevém manejada sob diferentes intensidades de pastejo. O delineamento experimental foi de blocos ao acaso com quatro tratamentos (10, 20, 30 e 40 cm de altura de manejo) e três repetições. Utilizaramse terneiros de corte de cruzamento industrial com idade e peso médio inicial de 10 meses e 210 kg, respectivamente. O método de pastejo foi contínuo com lotação variável. A adubação de base foi de 400 kg/ha de superfosfato simples e de 90 kg/ha de N em cobertura. As alturas do pasto afetaram a massa de forragem (MF), onde para cada cm de aumento na altura acima de 10 cm, houve incremento na matéria seca da pastagem em cerca de 86 kg/ha de MS. O aumento no ganho médio diário (GMD) foi condicionado pelo incremento na qualidade e/ou na quantidade de forragem disponível, e o modelo de resposta do GMD em relação às alturas do pasto, resultou em valores de 0,73 e 1,14 kg/animal/dia nos tratamentos de maior e menor GMD, respectivamente, que foram de 10 cm e 30 cm de altura. No rendimento de carcaça não houve diferença (P>0,05) entre os tratamentos, uma vez que todos os valores ficaram em torno de 51%. Quanto ao peso de carcaça quente e fria, peso de costilhar, escore de condição corporal e grau de acabamento, observou-se comportamento muito similar à evolução do ganho médio diário dos animais.