Simulations of droplet dispersion in the wakes of cylinders and icing tunnel spray bars

Simulations of droplet dispersion behind cylinder wakes and downstream of icing tunnel spray bars were conducted. In both cases, a range of droplet sizes were investigated numerically with a Lagrangian particle trajectory approach while the turbulent air flow was investigated with a hybrid Reynolds-Averaged Navier-Stokes/Large-Eddy Simulations approach scheme. In the first study, droplets were injected downstream of a cylinder at sub-critical conditions (i.e. with laminar boundary layer separation). A stochastic continuous random walk (CRW) turbulence model was used to capture the effects of sub-grid turbulence. Small inertia droplets (characterized by small Stokes numbers) were affected by both the large-scale and small-scale vortex structures and closely followed the air flow, while exhibiting a dispersion consistent with that of a scalar flow field. Droplets with intermediate Stokes numbers were centrifuged by the vortices to the outer edges of the wake, yielding an increased dispersion. Large Stokes number droplets were found to be less responsive to the vortex structures and exhibited the least dispersion. Particle concentration was also correlated with vorticity distribution which yielded preferential bias effects as a function of different particle sizes. This trend was qualitatively similar to results seen in homogenous isotropic turbulence, though the influence of particle inertia was less pronounced for the cylinder wake case. A similar study was completed for droplet dispersion within the Icing Research Tunnel (IRT) at the NASA Glenn Research Center, where it is important to obtain a nearly uniform liquid water content (LWC) distribution in the test section (to recreate atmospheric icing conditions).. For this goal, droplets are diffused by the mean and turbulent flow generated from the nozzle air jets, from the upstream spray bars, and from the vertical strut wakes. To understand the influence of these three components, a set of simulations was conducted with a sequential inclusion of these components. Firstly, a jet in an otherwise quiescent airflow was simulated to capture the impact of the air jet on flow turbulence and droplet distribution, and the predictions compared well with experimental results. The effects of the spray bar wake and vertical strut wake were then included with two more simulation conditions, for which it was found that the air jets were the primary driving force for droplet dispersion, i.e. that the spray bar and vertical strut wake effects were secondary.

Impact of extension of coverage to agricultural workers under PL 94-566, their characteristics and economic welfare.

"Prepared by G. Joachim [i.e. Joachim G.] Elterich and Linda Graham"--Prelim. p.

On the way to universal coverage of maternal services in Iringa rural District in Tanzania. Who is yet to be reached?

Background: Strategies to tackle maternal mortality in sub-Saharan Africa include expanding coverage of reproductive services.Even where high, more vulnerable women may not access services. No data is available on high coverage determinants. We investigated this in Tanzania in a predicted high utilization area. Methods: Data was collected through a household survey of 464 women with a recent delivery. Primary outcomes were facility delivery and ≥4 ANC visits. Determinants were analysed using multivariate regression. Results: Almost all women had attended ANC, though only 58.3% had ≥4 visits. ≥4 visits were more likely in the youngest age group (OR 2.7 95% CI 1.32–5.49, p=0.008), and in early ANC attenders (OR 3.2 95% CI 2.04–4.90, p<0.001). Facility delivery was greater than expected (87.7%), more likely in more educated women (OR 2.7 95% CI 1.50–4.75, p=0.002), in those within 5 kilometers of a facility (OR 3.2 95% CI 1.59–6.48, p=0.002), and for early ANC attenders (OR 2.4 95% CI 1.20–4.91, p=0.02). Conclusion: Rural contexts can achieve high facility delivery coverage. Based on our findings, strategies to reach women yet unserved should include promotion of early ANC start particularly for the less educated, and improvement of distant communities' access to facilities.

Awareness and Coverage of the National Health Insurance Scheme among Formal Sector Workers in Ilorin, Nigeria

A prepayment scheme for health through the National Health Insurance Scheme (NHIS) was commenced in Nigeria about ten years ago. Nigeria operates a federal system of government. Sub- national levels possess a high degree of autonomy in a number of sectors including health. It is important to assess the level of coverage of the scheme among the formal sector workers in Nigeria as a proxy to gauge the extent of coverage of the scheme and derive suitable lessons that could be used in its expansion. This is a cross-sectional, descriptive survey carried out among formal sector workers in Ilorin Kwara State, Nigeria. A stratified sampling technique was used to select study participants. A self-administered questionnaire was used to collect data from respondents. Data was analysed with the SPSS. Ethical approval to conduct the study was obtained from the Bowen University Teaching Hospital Research Ethics Committee. A total of 370 people participated in the study. Majority, (78.9%) of the respondents were aware of the NHIS, however only 13.5 % paid for health care services through the NHIS. Logistic regression analysis shows that respondents with post-secondary education (OR = 9.032, CI = 2.562 – 31.847, p = 0.001) and in federal civil service (OR = 2.679, CI = 1.036 – 6.929, p = 0.042) were over nine and three times more likely to be aware of the scheme than others. Coverage of the scheme among the respondents was unimpressive. A lot still need to be done to fast-track the expansion of the scheme among this sector of the population.

Point of View: The importance of Leadership towards universal health coverage in Low Income Countries

Universal health coverage—defined as access to the full range of the most appropriate health care and technology for all people at the lowest possible price or with social health protection—was the goal of the 1978 Alma-Ata Conference on Primary Health Care in Kazakhstan. Many low-income (developing) countries are currently unable to reach this goal despite having articulated the same in their health-related documents. In this paper we argue that, over 30 years on, inadequate political and technical leadership has prevented the realization of universal health coverage in low-income countries.

The importance of Leadership towards universal health coverage in Low Income Countries

Universal health coverage—defined as access to the full range of the most appropriate health care and technology for all people at the lowest possible price or with social health protection—was the goal of the 1978 Alma-Ata Conference on Primary Health Care in Kazakhstan. Many low-income (developing) countries are currently unable to reach this goal despite having articulated the same in their health-related documents. In this paper we argue that, over 30 years on, inadequate political and technical leadership has prevented the realization of universal health coverage in low-income countries.

Supplemental Coverage Option Expanding as Part of the Farm Safety Net

The 2014 Farm Bill created Supplemental Coverage Option (SCO), a new add-on crop insurance option which provides supplemental coverage on a producer’s underlying crop insurance policy. SCO operates by mimicking a producer’s individual crop insurance coverage and covering a portion of the deductible based on county-level yield or revenue. SCO is available in select Maryland counties for apples, barley, corn, grain sorghum, green peas, oats, peaches, processing beans, soybeans, sweet corn, and winter wheat, as of the 2017 crop year. USDA’s Risk Management Agency (RMA) continues to expand covered counties and crops covered, and begin distinguishing by practices (such as irrigated compared to non-irrigated).

Regimes of spray vaporization and combustion in counterflow configurations

This article addresses the problem of spray vaporization and combustion in axisymmetric opposed-jet configurations involving a stream of hot air counterflowing against a stream of nitrogen carrying a spray of fuel droplets. The Reynolds numbers of the jets are assumed to be large, so that mixing of the two streams is restricted to a thin mixing layer that separates the counterflowing streams. The evolution of the droplets in their feed stream from the injection location is seen to depend fundamentally on the value of the droplet Stokes number, St, defined as the ratio of the droplet acceleration time to the mixing layer strain time close to the stagnation point. Two different regimes of spray vaporization and combustion can be identified depending on the value of St. For values of St below a critical value, equal to 1/4 for dilute sprays with small values of the spray liquid mass loading ratio, the droplets decelerate to approach the gas stagnation plane with a vanishing axial velocity. In this case, the droplets located initially near the axis reach the mixing layer, where they can vaporize due to the heat received from the hot air, producing fuel vapor that can burn with the oxygen in a diffusion flame located on the air side of the mixing layer. The character of the spray combustion is different for values of St of order unity, because the droplets cross the stagnation plane and move into the opposing air stream, reaching distances that are much larger than the mixing layer thickness before they turn around. The vaporization of these crossing droplets, and also the combustion of the fuel vapor generated by them, occur in the hot air stream, without significant effects of molecular diffusion, generating a vaporization-assisted nonpremixed flame that stands on the air side outside the mixing layer. Separate formulations will be given below for these two regimes of combustion, with attention restricted to the near-stagnation-point region, where the solution is self-similar and all variables are only dependent on the distance to the stagnation plane. The resulting formulations display a reduced number of controlling parameters that effectively embody dependences of the structure of the spray flame on spray dilution, droplet inertia, and fuel preferential diffusion. Sample solutions are given for the limiting cases of pure vaporization and of infinitely fast chemistry, with the latter limit formulated in terms of chemistry-free coupling functions that allow for general nonunity Lewis numbers of the fuel vapor.

Application of Lidocaine Spray for Tracheal Intubation in Neonates - A Clinical Trial Study

Background: Tracheal intubation is extremely distressing, painful, and may influence heart rate and blood pressure. Sedatives, analgesics, and muscle relaxants are not commonly used for intubation in neonates. Objectives: This study aimed to evaluate the effects of lidocaine spray as a non-intravenous drug before neonatal intubation on blood pressure, heart rate, oxygen saturation and time of intubation. Patients and Methods: In a randomized, controlled study each neonate was randomly assigned to one of the two study groups by staffs who were not involved in the infant's care. The allocation concealment was kept in an opaque sealed envelope, and the investigators, the patient care team, and the assessors were blinded to the treatment allocation. The selected setting was NICU unit of a teaching hospital in Ilam city, Iran and participants were 60 neonates with indication of tracheal intubation with gestational age >30 weeks. Patients in the treatment group received lidocaine spray and the placebo group received spray of normal saline prior to intubation. Main outcome measurements were the mean rates of blood pressure, heart rate, oxygen saturation, intubation time and lidocaine side effects were measured before and after intubation. Results: Totally 60 newborns including 31 boys and 29 girls were entered into the study (drug group n = 30; placebo group n = 30). Boy/girl ratio in treatment and placebo groups were 1.3 and 0.88, respectively. Mean age ± SD of participants was 34.1 ± 24.8 hours (treatment: 35.3 ± 25.7; placebo: 32.9 ± 24.3; P < 0.0001). Mean weight ± SD of neonates was 2012.5 ± 969 g. Application of lidocaine spray caused a significant reduction of mean intubation time among treatment group compared with placebo group (treatment: 15.03 ± 2.2 seconds; placebo: 18.3 ± 2.3 seconds; P < 0.0001). Mean blood pressure, heart rate and oxygen saturation rate, among neonates in treatment group was reduced after intubation compared with their relevant figures before intubation; however, their differences were not statistically significant except for mean oxygen saturation rate that was reduced significantly in placebo group. No side effects were observed during study. Conclusions: Though the current study revealed some promising results in the application of lidocaine spray during neonatal intubation without any considerable side effects; however, the current investigation could only be considered as a pilot study for further attempts in different locations with higher sample sizes and in different situations.

Current Legal Rules Benefit Spray Applicators When It Comes to Pesticide Drift

Homeowners, landowners, pesticide applicators, and farmers are concerned about pesticide drift. It may injure a homeowner’s garden or flowers or ruin a neighboring farmer’s crop. While no Maryland court has considered the issue of liability from pesticide drift, courts in other states have. These decisions provide some guidance on how a Maryland court might handle the issue. Depending on the facts of the drift case, pesticide applicators and farmers could owe damages for nuisance or trespass case, or for uses inconsistent with the pesticide label.

Tin Oxide Based Composites Derived Using Electrostatic Spray Deposition Technique as Anodes for Li-Ion Batteries

Recent advances in the electric & hybrid electric vehicles and rapid developments in the electronic devices have increased the demand for high power and high energy density lithium ion batteries. Graphite (theoretical specific capacity: 372 mAh/g) used in commercial anodes cannot meet these demands. Amorphous SnO2 anodes (theoretical specific capacity: 781 mAh/g) have been proposed as alternative anode materials. But these materials have poor conductivity, undergo a large volume change during charging and discharging, large irreversible capacity loss leading to poor cycle performances. To solve the issues related to SnO2 anodes, we propose to synthesize porous SnO2 composites using electrostatic spray deposition technique. First, porous SnO2/CNT composites were fabricated and the effects of the deposition temperature (200,250, 300 oC) & CNT content (10, 20, 30, 40 wt %) on the electrochemical performance of the anodes were studied. Compared to pure SnO2 and pure CNT, the composite materials as anodes showed better discharge capacity and cyclability. 30 wt% CNT content and 250 oC deposition temperature were found to be the optimal conditions with regard to energy capacity whereas the sample with 20% CNT deposited at 250 oC exhibited good capacity retention. This can be ascribed to the porous nature of the anodes and the improvement in the conductivity by the addition of CNT. Electrochemical impedance spectroscopy studies were carried out to study in detail the change in the surface film resistance with cycling. By fitting EIS data to an equivalent circuit model, the values of the circuit components, which represent surface film resistance, were obtained. The higher the CNT content in the composite, lower the change in surface film resistance at certain voltage upon cycling. The surface resistance increased with the depth of discharge and decreased slightly at fully lithiated state. Graphene was also added to improve the performance of pure SnO2 anodes. The composites heated at 280 oC showed better energy capacity and energy density. The specific capacities of as deposited and post heat-treated samples were 534 and 737 mAh/g after 70 cycles. At the 70th cycle, the energy density of the composites at 195 °C and 280 °C were 1240 and 1760 Wh/kg, respectively, which are much higher than the commercially used graphite electrodes (37.2-74.4 Wh/kg). Both SnO2/CNTand SnO2/grapheme based composites with improved energy densities and capacities than pure SnO2 can make a significant impact on the development of new batteries for electric vehicles and portable electronics applications.