Can equipartition fields produce the tilts of bipolar magnetic regions?

The effect of turbulence on the nonaxisymmetric flux rings of equipartition field strength in bipolar magnetic regions is studied on the basis of the small-scale momentum exchange mechanism and the giant cell drag combined with the Kelvin-Helmholtz drag mechanism. It is shown that the giant cell drag and small-scale momentum exchange mechanism can make equipartition flux loops emerge at low latitudes, in addition to making them exhibit the observed tilts. However, the sizes of the flux tubes have to be restricted to a couple of hundred kilometers. An ad hoc constraint on the footpoints of the flux loops is introduced by not letting them move in the phi direction, and it is found that equipartition fields of any size can be made to emerge at sunspot latitudes with the observed tilts by suitably adjusting the footpoint separations.

3D MHD simulations of subsurface convection in OB stars

During their main sequence evolution, massive stars can develop convective regions very close to their surface. These regions are caused by an opacity peak associated with iron ionization. Cantiello et al. (2009) found a possible connection between the presence of sub-photospheric convective motions and small scale stochastic velocities in the photosphere of early-type stars. This supports a physical mechanism where microturbulence is caused by waves that are triggered by subsurface convection zones. They further suggest that clumping in the inner parts of the winds of OB stars could be related to subsurface convection, and that the convective layers may also be responsible for stochastic excitation of non-radial pulsations. Furthermore, magnetic fields produced in the iron convection zone could appear at the surface of such massive stars. Therefore subsurface convection could be responsible for the occurrence of observable phenomena such as line profile variability and discrete absorption components. These phenomena have been observed for decades, but still evade a clear theoretical explanation. Here we present preliminary results from 3D MHD simulations of such subsurface convection.

Hyvinvointivaltion läpimurto : Pienviljelyhegemonian rapautumisen, kansalaisliikehdinnän ja poliittisen murroksen keskinäiset suhteet suomalaisessa yhteiskunnassa 1950-luvun loppuvuosina

A Breakthrough of Welfare State. The inter-relationships of the civic movement, political transformation, and eroding of a hegemony based on small scale farming in the Finnish society in the late 1950's. The unusually rapid and powerful structural change; the non-parliamentary civic movements of 1956 - 1963; and the left majority in the Finnish parliament between 1958 - 1962 all took place as the Finnish welfare state started to develop. The aim of my research is to analyse the inter-relationships of these processes. The research describes the way the former semi self-sufficient, semi-proletarian and labour-intensive form of production - a simple and discriminatory system in itself - made it possible for the majority of the population to survive through hard work. For some it even provided a possibility to prosper. The waning vitality of semi self-sufficiency and small scale agriculture triggered a political ferment and started a period of searching for something new. The process was so intense that it broke up most of the parties and tore down the old consensus that was based on the power of economic and political elite. The most crucial battle of the great transformation was waged over the nature of the state: Should we build a welfare state and construct social security systems, or should we revert to the old night watchman state and, for example, cancel the modest forms of redistribution of income carried out in the 1950's? The people joining the civic movements were either cottagers of the impoverishing countryside or, quite often, people who had come from the countryside and thus had grown up under conditions of some form of solidarity that included taking care of one's own family. The Finnish social insurance developed in the midst of a change in the structure of production of the society, and it became a compromise to satisfy the needs of both the waning society of small scale agriculture and the rising proletarian society based on wage labour. The hodgepodge of political schemes and use of power became a battle between different notions of the economy and the state; the distribution of national income; and the position of Finland in the international context. This battle created a shape of an interregnum - a period of transformation including two notions of society, two alternative paths for the future and the logic of a correctional move. The transformation of Finland from a poor developing country into a prosperous society has been praised as a success story. In 1956 - 1959, when the old form of governance based on the interests of small scale agriculture and wood processing industry was in decay, and when the future seemed uncertain, the projects to reduce social benefits and efforts to distribute national income even more unequally than before led to a powerful counter-movement by citizens and started an hegemonic change and a equal socia development.

Asuntopolitiikka ja vieraskielisen väestön alueellinen keskittyminen Helsingissä vuosina 1992-2005

The aim of the thesis was to study the extent of spatial concentration of immigrant population in Helsinki and to analyse the impact of housing policy on ethnic residential segregation in 1992-2005. For the purpose of the study, immigrant population was defined based on the language spoken at home. The theory of residential segregation by Andersson and Molina formed the main theoretical framework for the study. According to Andersson and Molina ethnic residential segregation results from different dynamic intra-urban migration processes. Institutionally generated migration, i.e. migration patterns generated by various housing and immigrant policies and procedures, is one of the central factors in the development of ethnic segregation. The data of the study consisted of population and housing statistics and housing and immigrant policy documents of Helsinki municipality. Spatial concentration of immigrant population was studied both at district and building levels using GIS-methods and statistical methods. The housing policy of Helsinki municipality was analysed using a method created by Musterd et al. Musterd et al. categorise two types of policy approaches to residential segregation: spatial dispersion policy and compensating policy. The housing policy of Helsinki has a strong focus on social mixing and spatial dispersion of housing stock. Ethnic segregation is regarded as a threat. The importance of ethnic communities and networks is, however, acknowledged and small-scale concentration is therefore not considered harmful. Despite the spatial dispersion policy, the immigrant population is concentrated in the eastern, north-eastern and north-western suburbs of Helsinki. The spatial pattern of concentration was formed already at the beginning of the 1990's when immigration to Finland suddenly peaked. New immigrant groups were housed in the neighbourhoods where public housing was available at the time. Housing policy, namely the location of new residential areas and public housing blocks and the policies of public housing allocation were key factors influencing the residential patterns of immigrant population in the 1990's. The immigration and refugee policies of the state have also had an impact on the development. The concentration of immigrant population has continued in the same areas in the beginning of the 2000's. Dispersion to new areas has mainly taken place within the eastern and north-eastern parts of the city or in the adjacent areas. The migration patterns of native population and the reasonably rapid changes in the housing market have emerged as new factors generating and influencing the ethnic residential segregation in Helsinki in the 2000's. Due to social mixing and spatial dispersion policies, ethnic segregation in Helsinki has so far been fairly small-scale, concentrated in particular housing blocks. The number of residential buildings with a high share of immigrant population is very modest. However, the number of such buildings has doubled between 1996-2002. The concentration of immigrant population concerns mainly the public housing sector. The difference in the level of concentration between the public housing sector and privately owned housing companies is remarkable.

Direct numerical simulations of statistically steady, homogeneous, isotropic fluid turbulence with polymer additives

We carry out a direct numerical simulation (DNS) study that reveals the effects of polymers on statistically steady, forced, homogeneous, and isotropic fluid turbulence. We find clear manifestations of dissipation-reduction phenomena: on the addition of polymers to the turbulent fluid, we obtain a reduction in the energy dissipation rate; a significant modification of the fluid-energy spectrum, especially in the deep-dissipation range; and signatures of the suppression of small-scale structures, including a decrease in small-scale vorticity filaments. We also compare our results with recent experiments and earlier DNS studies of decaying fluid turbulence with polymer additives.

Asymptotic and finite element analyses of mode III dynamic crack growth at a ductile-brittle interface

In this work, dynamic crack growth along a ductile-brittle interface under anti-plane strain conditions is studied. The ductile solid is taken to obey the J(2) flow theory of plasticity with linear isotropic strain hardening, while the substrate is assumed to exhibit linear elastic behavior. Firstly, the asymptotic near-tip stress and velocity fields are derived. These fields are assumed to be variable-separable with a power singularity in the radial coordinate centered at the crack tip. The effects of crack speed, strain hardening of the ductile phase and mismatch in elastic moduli of the two phases on the singularity exponent and the angular functions are studied. Secondly, full-field finite element analyses of the problem under small-scale yielding conditions are performed. The validity of the asymptotic fields and their range of dominance are determined by comparing them with the results of the full-field finite element analyses. Finally, theoretical predictions are made of the variations of the dynamic fracture toughness with crack velocity. The influence of the bi-material parameters on the above variation is investigated.

Role of elasto-plastic analysis under cyclic loading in fatigue crack growth studies

Linear Elastic Fracture Mechanics (LEFM) has been widely used in the past for fatigue crack growth studies, but this is acceptable only in situations which are within small scale yielding (SSY). In many practical structural components, conditions of SSY could be violated and one has to look for fracture criteria based on elasto-plastic analysis. Crack closure phenomenon, one of the most striking discoveries based on inelastic deformations during crack growth, has significant effect on fatigue crack growth rate. Numerical simulation of this phenomenon is computationally intensive and involved but has been successfully implemented. Stress intensity factors and strain energy release rates lose their meaning, J-integral (or its incremental) values are applicable only in specific situations, whereas alternate path independent integrals have been proposed in the literature for use with elasto-plastic fracture mechanics (EPFM) based criteria. This paper presents certain salient features of two independent finite element (numerical) studies of relevance to fatigue crack growth, where elasto-plastic analysis becomes significant. These problems can only be handled in the current day computational environment, and would have been only a dream just a few years ago.

Finite element simulations of ductile rupture in a constrained metal foil

A numerical study of the ductile rupture in a metal foil constrained between two stiff ceramic blocks is performed. The finite element analysis is carried out under the conditions of mode I, plane strain, small-scale yielding. The rate-independent version of the Gurson model that accounts for the ductile failure mechanisms of microvoid nucleation, growth and coalescence is employed to represent the behavior of the metal foil. Different distributions of void nucleating sites in the metal foil are considered for triggering the initiation of discrete voids. The results clearly show that far-field triaxiality-induced cavitation is the dominant failure mode when the spacing of the void nucleating sites is large. On the contrary, void coalescence near the notch tip is found to be the operative failure mechanism when closely spaced void nucleating sites are considered.

Flow induced by an asymmetrically placed disk rotating coaxially inside a cylindrical casing

In this paper, the flow due to a rotating disk non-symmetrically placed with respect to the height of the enclosing stationary cylinder is analyzed numerically. The full Navier-Stokes equations expressed in terms of stream function and vorticity are solved by successive over-relaxation for different disk radii, its distance from the bottom casing and rotational Reynolds numbers. It is observed that the flow pattern is strongly influenced by the size and the position of the disk. When the disk is very close to the top casing and small in radius, there are two regions of different scales and the vortices in the region of small scale are trapped between the disk and the top casing. Further, the variation of the moment coefficient is determined for different positions and sizes of the rotating disk. The calculations shows that the frictional torque increases rapidly, when the disk approaches the top casing. This finding is of importance for the design of vertical rotating disk reactors applied in chemical vapor deposition.

Critical buckling temperature of single-walled carbon nanotubes embedded in a one-parameter elastic medium based on nonlocal continuum mechanics

In this paper, the critical budding temperature of single-walled carbon nanotubes (SWCNTs), which are embedded in one-parameter elastic medium (Winkler foundation) is estimated under the umbrella of continuum mechanics theory. Nonlocal continuum theory is incorporated into Timoshenko beam model and the governing differential equations of motion are derived. An explicit expression for the non-dimensional critical buckling temperature is also derived in this work. The effect of the nonlocal small scale coefficient, the Winkler foundation parameter and the ratio of the length to the diameter on the critical buckling temperature is investigated in detail. It can be observed that the effects of nonlocal small scale parameter and the Winkler foundation parameter are significant and should be considered for thermal analysis of SWCNTs. The results presented in this paper can provide useful guidance for the study and design of the next generation of nanodevices that make use of the thermal buckling properties of embedded single-walled carbon nanotubes. (C) 2011 Elsevier B.V. All rights reserved.

Alfven resonances and forced reconnection

The correspondence between the forced magnetic reconnection induced by perturbing the boundary of the simple Taylor model and the surface-wave-induced magnetic reconnection given by Alfven resonance theory is pointed out explicitly by showing that the theory of forced magnetic reconnection is actually embedded in the Alfven resonance theory. The advantages of viewing the forced reconnection as surface-wave-induced reconnection are briefly discussed in the context of the formation of small-scale structures at the magnetospheric boundary and solar coronal heating.

Properties of lime stabilised steam-cured blocks for masonry

The paper addresses certain issues pertaining to the technology of lime-stabilised steam-cured blocks used for masonry construction. Properties of lime-stabilised steam-cured blocks using expansive soils and tank bed soils have been examined. Influence of parameters like steam curing period, lime content and fly ash content on wet strength of blocks is studied. Steam curing of lime stabilised blocks at 80degreesC for about 20 hours at atmospheric pressure leads to considerably higher strengths when compared with curing under wet cloth at ambient temperatures. Clay-fly ash fractions of the mix control the optimum lime content yielding maximum strength. Long-term strength behaviour of steam-cured blocks has been monitored. The results indicate a favourable lime-clay ratio for stable long-term strength. A small-scale steam cured block production system has been designed and implemented to construct a load bearing masonry structure, thus demonstrating the potential of steam-cured block as a material for masonry construction.

Spectral Finite Element Formulation for Nanorods via Nonlocal Continuum Mechanics

In this article, the Eringen's nonlocal elasticity theory has been incorporated into classical/local Bernoulli-Euler rod model to capture unique properties of the nanorods under the umbrella of continuum mechanics theory. The spectral finite element (SFE) formulation of nanorods is performed. SFE formulation is carried out and the exact shape functions (frequency dependent) and dynamic stiffness matrix are obtained as function of nonlocal scale parameter. It has been found that the small scale affects the exact shape functions and the elements of the dynamic stiffness matrix. The results presented in this paper can provide useful guidance for the study and design of the next generation of nanodevices that make use of the wave dispersion properties of carbon nanotubes.

Study of non-local wave properties of nanotubes with surface effects

In macroscopic and even microscopic structural elements, surface effects can be neglected and classical theories are sufficient. As the structural size decreases towards the nanoscale regime, the surface-to-bulk energy ratio increases and surface effects must be taken into account. In the present work, the terahertz wave dispersion characteristics of a nanotube are studied with consideration of the surface effects as well as the non-local small scale effects. Non-local elasticity theory is used to derive the general governing differential equation based on equilibrium approach to include those scale effects. Scale and surface property dependent wave characteristic equations are obtained via spectral analysis. For the present study the material properties of an anodic alumina nanotube with crystallographic of < 111 > direction are considered. The present analysis shows that the effect of surface properties (surface integrated residual stress and surface integrated modulus) on the flexural wave characteristics of anodic nanotubes are more significant. It has been found that the flexural wavenumbers with surface effects are high as compared to that without surface effects. It has also been shown that, with consideration of surface effects the flexural wavenumbers are under compressive nature. The effect of the small scale and the size of the nanotube on wave dispersion properties are also captured in the present work. (C) 2012 Elsevier B.V. All rights reserved.

A Revisit to Capture the Entire Behavior of Ultrasonic Wave Dispersion Characteristics of Single Walled Carbon Nanotubes Based on Nonlocal Elasticity Theory and Flugge Shell Model

In this paper, an ultrasonic wave propagation analysis in single-walled carbon nanotube (SWCNT) is re-studied using nonlocal elasticity theory, to capture the whole behaviour. The SWCNT is modeled using Flugge's shell theory, with the wall having axial, circumferential and radial degrees of freedom and also including small scale effects. Nonlocal governing equations for this system are derived and wave propagation analysis is also carried out. The revisited nonlocal elasticity calculation shows that the wavenumber tends to infinite at certain frequencies and the corresponding wave velocity tends to zero at those frequencies indicating localization and stationary behavior. This frequency is termed as escape frequency. This behavior is observed only for axial and radial waves in SWCNT. It has been shown that the circumferential waves will propagate dispersively at higher frequencies in nonlocality. The magnitudes of wave velocities of circumferential waves are smaller in nonlocal elasticity as compared to local elasticity. We also show that the explicit expressions of cut-off frequency depend on the nonlocal scaling parameter and the axial wavenumber. The effect of axial wavenumber on the ultrasonic wave behavior in SWCNTs is also discussed. The present results are compared with the corresponding results (for first mode) obtained from ab initio and 3-D elastodynamic continuum models. The acoustic phonon dispersion relation predicted by the present model is in good agreement with that obtained from literature. The results are new and can provide useful guidance for the study and design of the next generation of nanodevices that make use of the wave propagation properties of single-walled carbon nanotubes.