One Pot, Two Step Sequence Converting Atom Transfer Radical Polymerization Directly to Radical Trap-Assisted Atom Transfer Radical Coupling

Monobrominated polystyrene (PStBr) chains were prepared using standard atom transfer radical polymerization (ATRP) procedures at 80 °C in THF, with monomer conversions allowed to proceed to approximately 40%. At this time, additional copper catalyst, reducing agent, and ligand were added to the unpurified reaction mixture, and the reaction was allowed to proceed at 50 °C in an atom transfer radical coupling (ATRC) phase. During this phase, polymerization continued to occur as well as coupling; expected due to the substantial amount of residual monomer remaining. This was confirmed using gel permeation chromatography (GPC), which showed increases in molecular weight not matching a simple doubling of the PStBr formed during ATRP, and an increase in monomer conversion after the second phase. When the radical trap 2-methyl-2-nitrosopropane (MNP) was added to the ATRC phase, no further monomer conversion occurred and the resulting product showed a doubling of peak molecular weight (Mp), consistent with a radical trap-assisted ATRC (RTA-ATRC) reaction.

One Pot, Two Step Sequence Converting Atom Transfer Radical Polymerization Directly to Radical Trap-Assisted Atom Transfer Radical Coupling

Monobrominated polystyrene (PStBr) chains were prepared using standard atom transfer radical polymerization (ATRP) procedures at 80 degrees C in THF, with monomer conversions allowed to proceed to approximately 40%. At this time, additional copper catalyst, reducing agent, and ligand were added to the unpurified reaction mixture, and the reaction was allowed to proceed at 50 degrees C in an atom transfer radical coupling (ATRC) phase. During this phase, polymerization continued to occur as well as coupling; expected due to the substantial amount of residual monomer remaining. This was confirmed using gel permeation chromatography (GPC), which showed increases in molecular weight not matching a simple doubling of the PStBr formed during ATRP, and an increase in monomer conversion after the second phase. When the radical trap 2-methyl-2-nitrosopropane (MNP) was added to the ATRC phase, no further monomer conversion occurred and the resulting product showed a doubling of peak molecular weight (M-p), consistent with a radical trap-assisted ATRC (RTA-ATRC) reaction. (C) 2013 Elsevier Ltd. All rights reserved.

Second-Generation Orthopaedic Measurement Device for in-vivo Assessment of Bone Quality

There are two main types of bone in the human body, trabecular and cortical bone. Cortical bone is primarily found on the outer surface of most bones in the body while trabecular bone is found in vertebrae and at the end of long bones (Ross 2007). Osteoporosis is a condition that compromises the structural integrity of trabecular bone, greatly reducing the ability of the bone to absorb energy from falls. The current method for diagnosing osteoporosis and predicting fracture risk is measurement of bone mineral density. Limitations of this method include dependence on the bone density measurement device and dependence on type of test and measurement location (Rubin 2005). Each year there are approximately 250,000 hip fractures in the United States due to osteoporosis (Kleerekoper 2006). Currently, the most common method for repairing a hip fracture is a hip fixation surgery. During surgery, a temporary guide wire is inserted to guide the permanent screw into place and then removed. It is believed that directly measuring this screw pullout force may result in a better assessment of bone quality than current indirect measurement techniques (T. Bowen 2008-2010, pers. comm.). The objective of this project is to design a device that can measure the force required to extract this guide wire. It is believed that this would give the surgeon a direct, quantitative measurement of bone quality at the site of the fixation. A first generation device was designed by a Bucknell Biomedical Engineering Senior Design team during the 2008- 2009 Academic Year. The first step of this project was to examine the device, conduct a thorough design analysis, and brainstorm new concepts. The concept selected uses a translational screw to extract the guide wire. The device was fabricated and underwent validation testing to ensure that the device was functional and met the required engineering specifications. Two tests were conducted, one to test the functionality of the device by testing if the device gave repeatable results, and the other to test the sensitivity of the device to misalignment. Guide wires were extracted from 3 materials, low density polyethylene, ultra high molecular weight polyethylene, and polypropylene and the force of extraction was measured. During testing, it was discovered that the spring in the device did not have a high enough spring constant to reach the high forces necessary for extracting the wires without excessive deflection of the spring. The test procedure was modified slightly so the wires were not fully threaded into the material. The testing results indicate that there is significant variation in the screw pullout force, up to 30% of the average value. This significant variation was attributed to problems in the testing and data collection, and a revised set of tests was proposed to better evaluate the performance of the device. The fabricated device is a fully-functioning prototype and further refinements and testing of the device may lead to a 3rd generation version capable of measuring the screw pullout force during hip fixation surgery.

Second Annual Kansas State–Nebraska Biochemical Engineering Symposium (April 29, 1972)

This booklet contains abstracts of papers presented at a biochemical engineering symposium conducted at the University of Nebraska-Lincoln on April 29, 1972. This was the second annual symposium on this subject, the first having been held at Kansas State University on June 4, 1971. It is expected that future symposia will alternate between the two campuses. ContentsS.H. Lin, Kansas State University, "Enzyme Reaction in a Tubular Reactor with Laminar Flow" Gregory C. Martin, University of Nebraska, "Estimation of Parameters in Population Models for Schizosaccharomyces pombe from Chemostat Data" Jaiprakash S. Shastry and Prakash N. Mishra, Kansas State University, "Immobilized Enzymes: Analysis of Ultrafiltration Reactors" Mark D. Young, University of Nebraska, "Modelling Unsteady-State Two-Species Data Using Ramkrishna's Staling Model" G.C.Y. Chu, Kansas State University, "Optimization of Step Aeration Waste Treatment Systems Using EVOP" Shinji Goto, University of Nebraska, "Growth of the Blue-Green Alga Microcytis aeruginosa under Defined Conditions" Prakash N. Mishra and Thomas M.C. Kuo, Kansas State University, "Digital Computer Simulation of the Activated Sludge System: Effect of Primary Clarifier on System Performance" Mark D. Young, University of Nebraska, "Aerobic Fermentation of Paunch Liquor"

The first step of aminoacylation at the atomic level in histidyl-tRNA synthetase

The crystal structure of an enzyme–substrate complex with histidyl-tRNA synthetase from Escherichia coli, ATP, and the amino acid analog histidinol is described and compared with the previously obtained enzyme–product complex with histidyl-adenylate. An active site arginine, Arg-259, unique to all histidyl-tRNA synthetases, plays the role of the catalytic magnesium ion seen in seryl-tRNA synthetase. When Arg-259 is substituted with histidine, the apparent second order rate constant (kcat/Km) for the pyrophosphate exchange reaction and the aminoacylation reaction decreases 1,000-fold and 500-fold, respectively. Crystals soaked with MnCl2 reveal the existence of two metal binding sites between β- and γ-phosphates; these sites appear to stabilize the conformation of the pyrophosphate. The use of both conserved metal ions and arginine in phosphoryl transfer provides evidence of significant early functional divergence of class II aminoacyl-tRNA synthetases.

An Embryo-Defective Mutant of Arabidopsis Disrupted in the Final Step of Biotin Synthesis

Auxotrophic mutants have played an important role in the genetic dissection of biosynthetic pathways in microorganisms. Equivalent mutants have been more difficult to identify in plants. The bio1 auxotroph of Arabidopsis thaliana was shown previously to be defective in the synthesis of the biotin precursor 7,8-diaminopelargonic acid. A second biotin auxotroph of A. thaliana has now been identified. Arrested embryos from this bio2 mutant are defective in the final step of biotin synthesis, the conversion of dethiobiotin to biotin. This enzymatic reaction, catalyzed by the bioB product (biotin synthase) in Escherichia coli, has been studied extensively in plants and bacteria because it involves the unusual addition of sulfur to form a thiophene ring. Three lines of evidence indicate that bio2 is defective in biotin synthase production: mutant embryos are rescued by biotin but not dethiobiotin, the mutant allele maps to the same chromosomal location as the cloned biotin synthase gene, and gel-blot hybridizations and polymerase chain reaction amplifications revealed that homozygous mutant plants contain a deletion spanning the entire BIO2-coding region. Here we describe how the isolation and characterization of this null allele have provided valuable insights into biotin synthesis, auxotrophy, and gene redundancy in plants.

Cloning, baculovirus expression, and characterization of a second mouse prolyl 4-hydroxylase alpha-subunit isoform: formation of an alpha 2 beta 2 tetramer with the protein disulfide-isomerase/beta subunit.

Prolyl 4-hydroxylase (EC 1.14.11.2) catalyzes the posttranslational formation of 4-hydroxyproline in collagens. The vertebrate enzyme is an alpha 2 beta 2 tetramer, the beta subunit of which is a highly unusual multifunctional polypeptide, being identical to protein disulfide-isomerase (EC 5.3.4.1). We report here the cloning of a second mouse alpha subunit isoform, termed the alpha (II) subunit. This polypeptide consists of 518 aa and a signal peptide of 19 aa. The processed polypeptide is one residue longer than the mouse alpha (I) subunit (the previously known type), the cloning of which is also reported here. The overall amino acid sequence identity between the mouse alpha (II) and alpha (I) subunits is 63%. The mRNA for the alpha (II) subunit was found to be expressed in a variety of mouse tissues. When the alpha (II) subunit was expressed together with the human protein disulfide-isomerase/beta subunit in insect cells by baculovirus vectors, an active prolyl 4-hydroxylase was formed, and this protein appeared to be an alpha (II) 2 beta 2 tetramer. The activity of this enzyme was very similar to that of the human alpha (I) 2 beta 2 tetramer, and most of its catalytic properties were also highly similar, but it differed distinctly from the latter in that it was inhibited by poly(L-proline) only at very high concentrations. This property may explain why the type II enzyme was not recognized earlier, as an early step in the standard purification procedure for prolyl 4-hydroxylase is affinity chromatography on a poly(L-proline) column.

Chiral gold(I) vs chiral silver complexes as catalysts for the enantioselective synthesis of the second generation GSK-hepatitis C virus inhibitor

The synthesis of a GSK 2nd generation inhibitor of the hepatitis C virus, by enantioselective 1,3-dipolar cycloaddition between a leucine derived iminoester and tert-butyl acrylate, was studied. The comparison between silver(I) and gold(I) catalysts in this reaction was established by working with chiral phosphoramidites or with chiral BINAP. The best reaction conditions were used for the total synthesis of the hepatitis C virus inhibitor by a four step procedure affording this product in 99% ee and in 63% overall yield. The origin of the enantioselectivity of the chiral gold(I) catalyst was justified according to DFT calculations, the stabilizing coulombic interaction between the nitrogen atom of the thiazole moiety and one of the gold atoms being crucial.

Time trials on second-order and variable-learning-rate algorithms

The performance of seven minimization algorithms are compared on five neural network problems. These include a variable-step-size algorithm, conjugate gradient, and several methods with explicit analytic or numerical approximations to the Hessian.

Discrimination between strain and temperature effects using first and second-order diffraction from a long period grating

We study the effects of temperature and strain on the spectra of the first and second-order diffraction attenuation bands of a single long-period grating (LPG) in step-index fibre. The primary and second-order attenuation bands had comparable strength with the second-order bands appearing in the visible and near-infra red parts of the spectrum. Using first and second-order diffraction to the eighth cladding mode a sensitivity matrix was obtained with limiting accuracy given by cross-sensitivity of ~1.19% of the measurement. The sensing scheme presented as a limiting temperature and strain resolution of ±0.7 °C and ~±25 µ.

Tense, aspect and modality in first and second language

Time after time… and aspect and mood. Over the last twenty five years, the study of time, aspect and - to a lesser extent - mood acquisition has enjoyed increasing popularity and a constant widening of its scope. In such a teeming field, what can be the contribution of this book? We believe that it is unique in several respects. First, this volume encompasses studies from different theoretical frameworks: functionalism vs generativism or function-based vs form-based approaches. It also brings together various sub-fields (first and second language acquisition, child and adult acquisition, bilingualism) that tend to evolve in parallel rather than learn from each other. A further originality is that it focuses on a wide range of typologically different languages, and features less studied languages such as Korean and Bulgarian. Finally, the book gathers some well-established scholars, young researchers, and even research students, in a rich inter-generational exchange, that ensures the survival but also the renewal and the refreshment of the discipline. The book at a glance The first part of the volume is devoted to the study of child language acquisition in monolingual, impaired and bilingual acquisition, while the second part focuses on adult learners. In this section, we will provide an overview of each chapter. The first study by Aviya Hacohen explores the acquisition of compositional telicity in Hebrew L1. Her psycholinguistic approach contributes valuable data to refine theoretical accounts. Through an innovating methodology, she gathers information from adults and children on the influence of definiteness, number, and the mass vs countable distinction on the constitution of a telic interpretation of the verb phrase. She notices that the notion of definiteness is mastered by children as young as 10, while the mass/count distinction does not appear before 10;7. However, this does not entail an adult-like use of telicity. She therefore concludes that beyond definiteness and noun type, pragmatics may play an important role in the derivation of Hebrew compositional telicity. For the second chapter we move from a Semitic language to a Slavic one. Milena Kuehnast focuses on the acquisition of negative imperatives in Bulgarian, a form that presents the specificity of being grammatical only with the imperfective form of the verb. The study examines how 40 Bulgarian children distributed in two age-groups (15 between 2;11-3;11, and 25 between 4;00 and 5;00) develop with respect to the acquisition of imperfective viewpoints, and the use of imperfective morphology. It shows an evolution in the recourse to expression of force in the use of negative imperatives, as well as the influence of morphological complexity on the successful production of forms. With Yi-An Lin’s study, we concentrate both on another type of informant and of framework. Indeed, he studies the production of children suffering from Specific Language Impairment (SLI), a developmental language disorder the causes of which exclude cognitive impairment, psycho-emotional disturbance, and motor-articulatory disorders. Using the Leonard corpus in CLAN, Lin aims to test two competing accounts of SLI (the Agreement and Tense Omission Model [ATOM] and his own Phonetic Form Deficit Model [PFDM]) that conflicts on the role attributed to spellout in the impairment. Spellout is the point at which the Computational System for Human Language (CHL) passes over the most recently derived part of the derivation to the interface components, Phonetic Form (PF) and Logical Form (LF). ATOM claims that SLI sufferers have a deficit in their syntactic representation while PFDM suggests that the problem only occurs at the spellout level. After studying the corpus from the point of view of tense / agreement marking, case marking, argument-movement and auxiliary inversion, Lin finds further support for his model. Olga Gupol, Susan Rohstein and Sharon Armon-Lotem’s chapter offers a welcome bridge between child language acquisition and multilingualism. Their study explores the influence of intensive exposure to L2 Hebrew on the development of L1 Russian tense and aspect morphology through an elicited narrative. Their informants are 40 Russian-Hebrew sequential bilingual children distributed in two age groups 4;0 – 4;11 and 7;0 - 8;0. They come to the conclusion that bilingual children anchor their narratives in perfective like monolinguals. However, while aware of grammatical aspect, bilinguals lack the full form-function mapping and tend to overgeneralize the imperfective on the principles of simplicity (as imperfective are the least morphologically marked forms), universality (as it covers more functions) and interference. Rafael Salaberry opens the second section on foreign language learners. In his contribution, he reflects on the difficulty L2 learners of Spanish encounter when it comes to distinguishing between iterativity (conveyed with the use of the preterite) and habituality (expressed through the imperfect). He examines in turn the theoretical views that see, on the one hand, habituality as part of grammatical knowledge and iterativity as pragmatic knowledge, and on the other hand both habituality and iterativity as grammatical knowledge. He comes to the conclusion that the use of preterite as a default past tense marker may explain the impoverished system of aspectual distinctions, not only at beginners but also at advanced levels, which may indicate that the system is differentially represented among L1 and L2 speakers. Acquiring the vast array of functions conveyed by a form is therefore no mean feat, as confirmed by the next study. Based on the prototype theory, Kathleen Bardovi-Harlig’s chapter focuses on the development of the progressive in L2 English. It opens with an overview of the functions of the progressive in English. Then, a review of acquisition research on the progressive in English and other languages is provided. The bulk of the chapter reports on a longitudinal study of 16 learners of L2 English and shows how their use of the progressive expands from the prototypical uses of process and continuousness to the less prototypical uses of repetition and future. The study concludes that the progressive spreads in interlanguage in accordance with prototype accounts. However, it suggests additional stages, not predicted by the Aspect Hypothesis, in the development from activities and accomplishments at least for the meaning of repeatedness. A similar theoretical framework is adopted in the following chapter, but it deals with a lesser studied language. Hyun-Jin Kim revisits the claims of the Aspect Hypothesis in relation to the acquisition of L2 Korean by two L1 English learners. Inspired by studies on L2 Japanese, she focuses on the emergence and spread of the past / perfective marker ¬–ess- and the progressive – ko iss- in the interlanguage of her informants throughout their third and fourth semesters of study. The data collected through six sessions of conversational interviews and picture description tasks seem to support the Aspect Hypothesis. Indeed learners show a strong association between past tense and accomplishments / achievements at the start and a gradual extension to other types; a limited use of past / perfective marker with states and an affinity of progressive with activities / accomplishments and later achievements. In addition, - ko iss– moves from progressive to resultative in the specific category of Korean verbs meaning wear / carry. While the previous contributions focus on function, Evgeniya Sergeeva and Jean-Pierre Chevrot’s is interested in form. The authors explore the acquisition of verbal morphology in L2 French by 30 instructed native speakers of Russian distributed in a low and high levels. They use an elicitation task for verbs with different models of stem alternation and study how token frequency and base forms influence stem selection. The analysis shows that frequency affects correct production, especially among learners with high proficiency. As for substitution errors, it appears that forms with a simple structure are systematically more frequent than the target form they replace. When a complex form serves as a substitute, it is more frequent only when it is replacing another complex form. As regards the use of base forms, the 3rd person singular of the present – and to some extent the infinitive – play this role in the corpus. The authors therefore conclude that the processing of surface forms can be influenced positively or negatively by the frequency of the target forms and of other competing stems, and by the proximity of the target stem to a base form. Finally, Martin Howard’s contribution takes up the challenge of focusing on the poorer relation of the TAM system. On the basis of L2 French data obtained through sociolinguistic interviews, he studies the expression of futurity, conditional and subjunctive in three groups of university learners with classroom teaching only (two or three years of university teaching) or with a mixture of classroom teaching and naturalistic exposure (2 years at University + 1 year abroad). An analysis of relative frequencies leads him to suggest a continuum of use going from futurate present to conditional with past hypothetic conditional clauses in si, which needs to be confirmed by further studies. Acknowledgements The present volume was inspired by the conference Acquisition of Tense – Aspect – Mood in First and Second Language held on 9th and 10th February 2008 at Aston University (Birmingham, UK) where over 40 delegates from four continents and over a dozen countries met for lively and enjoyable discussions. This collection of papers was double peer-reviewed by an international scientific committee made of Kathleen Bardovi-Harlig (Indiana University), Christine Bozier (Lund Universitet), Alex Housen (Vrije Universiteit Brussel), Martin Howard (University College Cork), Florence Myles (Newcastle University), Urszula Paprocka (Catholic University of Lublin), †Clive Perdue (Université Paris 8), Michel Pierrard (Vrije Universiteit Brussel), Rafael Salaberry (University of Texas at Austin), Suzanne Schlyter (Lund Universitet), Richard Towell (Salford University), and Daniel Véronique (Université d’Aix-en-Provence). We are very much indebted to that scientific committee for their insightful input at each step of the project. We are also thankful for the financial support of the Association for French Language Studies through its workshop grant, and to the Aston Modern Languages Research Foundation for funding the proofreading of the manuscript.

Drying of biomass for second generation synfuel production

Drying is a major and challenging step in the pre-treatment of biomass for production of second generation synfuels for transport. The biomass feedstocks are mostly wet and need to be dried from 30 to 60 wt% moisture content to about 10-15 wt%. The present survey aims to define and evaluate a few of the most promising optimised concepts for biomass pre-treatment scheme in the production of second generation synfuels for transport. The most promising commercially available drying processes were reviewed, focusing on the applications, operational factors and emissions of dryers. The most common dryers applied now for biomass in bio-energy plants are direct rotary dryers, but the use of steam drying techniques is increasing. Steam drying systems enable the integration of the dryer to existing energy sources. In addition to integration, emissions and fire or explosion risks have to be considered when selecting a dryer for the plant. In steam drying there will be no gaseous emissions, but the aqueous effluents need often treatment. Concepts for biomass pre-treatment were defined for two different cases including a large-scale wood-based gasification synfuel production and a small-scale pyrolysis process based on wood chips and miscanthus bundles. For the first case a pneumatic conveying steam dryer was suggested. In the second case the flue gas will be used as drying medium in a direct or indirect rotary dryer.

Techno-economic assessment and uncertainty analysis of thermochemical processes for second generation biofuels

Biomass-To-Liquid (BTL) is one of the most promising low carbon processes available to support the expanding transportation sector. This multi-step process produces hydrocarbon fuels from biomass, the so-called “second generation biofuels” that, unlike first generation biofuels, have the ability to make use of a wider range of biomass feedstock than just plant oils and sugar/starch components. A BTL process based on gasification has yet to be commercialized. This work focuses on the techno-economic feasibility of nine BTL plants. The scope was limited to hydrocarbon products as these can be readily incorporated and integrated into conventional markets and supply chains. The evaluated BTL systems were based on pressurised oxygen gasification of wood biomass or bio-oil and they were characterised by different fuel synthesis processes including: Fischer-Tropsch synthesis, the Methanol to Gasoline (MTG) process and the Topsoe Integrated Gasoline (TIGAS) synthesis. This was the first time that these three fuel synthesis technologies were compared in a single, consistent evaluation. The selected process concepts were modelled using the process simulation software IPSEpro to determine mass balances, energy balances and product distributions. For each BTL concept, a cost model was developed in MS Excel to estimate capital, operating and production costs. An uncertainty analysis based on the Monte Carlo statistical method, was also carried out to examine how the uncertainty in the input parameters of the cost model could affect the output (i.e. production cost) of the model. This was the first time that an uncertainty analysis was included in a published techno-economic assessment study of BTL systems. It was found that bio-oil gasification cannot currently compete with solid biomass gasification due to the lower efficiencies and higher costs associated with the additional thermal conversion step of fast pyrolysis. Fischer-Tropsch synthesis was the most promising fuel synthesis technology for commercial production of liquid hydrocarbon fuels since it achieved higher efficiencies and lower costs than TIGAS and MTG. None of the BTL systems were competitive with conventional fossil fuel plants. However, if government tax take was reduced by approximately 33% or a subsidy of £55/t dry biomass was available, transport biofuels could be competitive with conventional fuels. Large scale biofuel production may be possible in the long term through subsidies, fuels price rises and legislation.

Discrimination between strain and temperature effects using first and second-order diffraction from a long-period grating

We study the effects of temperature and strain on the spectra of the first and second-order diffraction attenuation bands of a single long-period grating (LPG) in step-index fibre. The primary and second-order attenuation bands had comparable strength with the second-order bands appearing in the visible and near-infra red parts of the spectrum. Using first and second-order diffraction to the eighth cladding mode a sensitivity matrix was obtained with limiting accuracy given by cross-sensitivity of ∼ 1.19% of the measurement. The sensing scheme presented as a limiting temperature and strain resolution of ± 0.7 °C and ∼ ± 25 με. © 2002 Elsevier Science B.V. All rights reserved.

An iterative procedure for solving a Cauchy problem for second order elliptic equations

An iterative method for reconstruction of solutions to second order elliptic equations by Cauchy data given on a part of the boundary, is presented. At each iteration step, a series of mixed well-posed boundary value problems are solved for the elliptic operator and its adjoint. The convergence proof of this method in a weighted L2 space is included. (© 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)