Emergence of corn according to the sowing depth of the seed and loads on press wheels

The seeding process was the operation that suffered the most changes in no-tillage system due the cover crop soil and new particle soil arrangement. The objective of this study was to verify the effects of loads applied to the wheels and adjustments of sowing depth on seedling emergence of corn in no-tillage system. The experimental design was completely randomized with a factorial arrangement 5x4, with five loads applied to the wheels and four theoretical sowing depth adjustments. The real sowing depth increased in the lower theoretical depth and decreased in the higher theoretical depth, due to the compaction loads. Regarding the time of emergence, loads applied had not influence at the greater depths. Emergence time decreased with the load increase in the lower depths. Thus, the adjustment of the compactor wheels can influence in the corn seeding process.

Economic optimization method to design telescope irrigation of multiples outlets

In this study is presented an economic optimization method to design telescope irrigation laterals (multidiameter) with regular spaced outlets. The proposed analytical hydraulic solution was validated by means of a pipeline composed of three different diameters. The minimum acquisition cost of the telescope pipeline was determined by an ideal arrangement of lengths and respective diameters for each one of the three segments. The mathematical optimization method based on the Lagrange multipliers provides a strategy for finding the maximum or minimum of a function subject to certain constraints. In this case, the objective function describes the acquisition cost of pipes, and the constraints are determined from hydraulic parameters as length of irrigation laterals and total head loss permitted. The developed analytical solution provides the ideal combination of each pipe segment length and respective diameter, resulting in a decreased of the acquisition cost.

Evaluation of covering materials in individual shelters and its effects on physiological responses and performance of dairy calves

In Tropical regions, the animal performance is often affected by climate conditions. This study aimed to evaluate covering materials in individual shelters, normally used to house dairy calves, and its influence on the calves physiology and performance. The design used was completely randomized, with a 2x3 factorial arrangement to compare the averages of 5% through the Tukey's test, i.e., both genders- and three types of covering in the shelters (Z - zinc; AC - asbestos cement; and WPAC - white-painted asbestos cement). Parameters evaluated included daily weight gain (DWG), dry matter intake (DMI), feed conversion (FC), rectal temperature (RT), and respiratory frequency (RF). Results showed significant differences (P < 0.05) among males (1.04kg/day) and females (0.74kg/day) for DWG and interaction between gender and treatment (P < 0.05) for zinc covering (0.562kg/day for females and 1.120kg/day for males). Significant differences were also observed in FI of animals housed under shelters with the covering of zinc (48.35kgDM/day for females and 96.91 kgDM/day for males). There were no significant differences (P > 0.05) in the FC and the RT, and there were significant differences (P < 0.05) for RF in the Z treatments (56.9 mov.min-1), WPAC (62.2 mov.min-1) and FC (70.25 mov.min-1). It was concluded that different covering materials did not affect performance and dry matter intake of dairy calves. However, the animals' physiology of thermoregulation was altered by the different covering materials used in individual shelters.

Coffea arabica (cv Catuaí) production and bean size under different population arrangements and soil water availability

The purpose of this research was to evaluate the effect of drip irrigation under different population arrangements on the phytometric features, coffee productivity and bean size classification according to sieve retention. The experiment with Coffea arabica L. cv Catuaí was carried out in Mococa, São Paulo, Brazil. The experimental design was a 6 x 2 factorial scheme in randomized blocks, with four replications. The six densities of plantation were E1 (1.60 x 0.50 m); E2 (1.60 x 0.75 m); E3 (1.60 x 1.00 m); E4 (3.20 x 0.50 m); E5 (3.20 x 0.75 m) and E6 (3.20 x 1.00 m), which were divided according to the availability of water (irrigated - I - or non-irrigated - NI - groups). Data were submitted to analysis of variance and averages compared by Tukey test at 1 and 5% of probability. Descriptive analysis of coffee beans according to sieve classification was performed. Irrigation promoted an increase in plant height, crown diameter and production of processed coffee when compared with the NI group. Interaction between population arrangement and irrigation was observed, with an increase in production and crown diameter as the spacing was decreased. Therefore, irrigation provided significant increase in coffee bean size.

Energetic efficiency of an agricultural tractor in function of tire inflation pressure

The tire inflation pressure, among other factors, determines the efficiency in which a tractor can exert traction. It was studied the effect of using two tire inflation pressures, 110.4 kPa in the front and rear wheels, 124.2 kPa in the front wheel and 138 kPa in the rear wheels, the energetic efficiency of an agricultural tractor of 147 kW of engine power, in the displacement speed of 6.0 km.h-1, on track with firm surface, with the tractor engine speed of 2000 rpm. For each condition of the tire pressure, the tested tractor was subjected to constant forces in the drawbar of 45 kN and 50 kN, covering 30 meters. It was used a randomized complete block with a 2x2 factorial arrangement (tire pressure and drawbar power) with four replications, totaling 16 experimental units. Data were subjected to analysis of variance, using the Tukey test at 5% probability for comparison averages. The lowest hourly and specific fuel consumption, the lowest slippage of the wheelsets and the highest efficiency in the drawbar was obtained with the tire inflation pressure of 110.4 kPa in the front and rear tires of the tractor, highlighting that lower pressures improve energetic and operational performance of the tractor.

Sweet grape mini tomato grown in culture substrates and effluent with nutrient complementation

The objective of this study was to evaluate production of Sweet Grape mini tomato (Lycopersicum esculentum Mill.) using culture substrates and nutrient solution sewage effluent, applied by drip irrigation (fertigation). The experiment was conducted at the University of Goiás State (UEG-UnUCET), from June to November 2011 in Anápolis-GO, Brazil. The experimental design was a 2 x 3 factorial arrangement in a randomized complete block design with four repetitions. The plots were made by combining two nutrient solutions, effluent supplemented with mineral fertilizers (EcS); conventional nutrient solution (SnC); in addition three cultivation substrates: 60% of fine sand washed + 40% substrate composed by 20% coconut fiber plus 80% pine bark (S1); 20% coconut fiber and 80% pine bark (S2) and natural coconut fiber (S3). Sewage effluent were determined nitrate, calcium, potassium, manganese, total phosphate, total iron, magnesium, chloride, sulphate, boron, zinc and molybdenum. We evaluated average mass and average number of fruits per bunch, total fruit and total yield per plant. Statistical difference absence among tested solutions indicates sewage effluent can be used as an alternative source of nutrients in growing mini tomatoes in hydroponics.

Corn production for silage intercropped with forage in the farming-cattle breeding integration

Corn cropping for silage, due to the plant material exportation, intercropping with forage provides greater ground cover and straw formation for the Direct Planting System (DPS) continuity. The objective of this study was to evaluate corn production for silage in DPS intercropped with four forages (Urochloa brizantha cv. Marandu, U. ruziziensis cv. Ruziziensis, Panicum maximum cv. Tanzânia and P. maximum cv. Áries). We applied three sowing methods (in row together with corn fertilizer; by no-till sowing simultaneously to corn sowing and at V4 corn stage) and corn without intercropping. The experiment was conducted in autumn/ winter of 2010, in Selvíria - MS, in a randomized block design in factorial arrangement (4 x 3 + 1) and 4 replications. For corn, we evaluated plant height, basal stem diameter, initial and final stand and silage production and for forage dry matter production. Morphological characteristics and corn yield were not affected by intercropping when compared to sole corn crop. Forage dry matter production sown in corn row with fertilizer is a highlight, which in addition to providing greater productivity, harnesses the operation during sowing.

Evaluation of roof slope and exposure with different roofing materials in reduced models of animal production facilities in spring and summer

The present study was conducted at the Department of Rural Engineering and the Department of Animal Morphology and Physiology of FCAV/Unesp, Jaboticabal, SP, Brazil. The objective was to verify the influence of roof slope, exposure and roofing material on the internal temperature of reduced models of animal production facilities. For the development of the research, 48 reduced and dissemble models with dimensions 1.00 × 1.00 × 0.50 m were used. The roof was shed-type, and the models faced to the North or South directions, with 24 models for each side of exposure. Ceramic, galvanized-steel and fibro tiles were used to build the roofs. Slopes varied between 20, 30, 40 and 50% for the ceramic tile and 10, 30, 40 and 50% for the other two. Inside the models, temperature readings were performed at every hour, for 12 months. The results were evaluated in a general linear model in a nested 3 × 4 × 2 factorial arrangement, in which the effects of roofing material and exposure were nested on the factor Slope. Means were compared by the Tukey test at 5% of probability. After analyzing the data, we observed that with the increase in the slope and exposure to the South, there was a drop in the internal temperature within the model at the geographic coordinates of Jaboticabal city (SP/Brazil).

Environment in poultry production covered with thermal and aluminum roofing tiles

Brazil is a country of tropical climate, a fact that hinders the poultry production in the aspect of thermal comfort. Thus, we aimed to evaluate the thermal environment in commercial poultry houses with different covers during the months of December 2012 to May 2013, in the municipality of Rio Verde, Goiás. The experimental design was completely randomized in split plots with factorial arrangement of treatments 2x3, being two shed models (thermal and aluminum roof tiles) and three sections within each shed (initial, central and final) for 182 days, having the days as replicates. The thermal environment was assessed through thermal comfort indices: Temperature and Humidity Index, Black Globe Temperature and Humidity Index, Radiant Heat Load and Enthalpy. The data was analyzed by SISVAR 5.1., through the analysis of variance, the Scott Knott test used to compare the means, considering a significance level of 1%. The results showed a significant statistical difference between the sheds and the points assessed (P < 0.05). The thermal shed had the lowest values for the environmental variables (Dbt and Bgt) and thermal indices studied, but larger values for the RH compared to the shed with aluminum covering. The use of thermal covers minimizes the difference in temperature range throughout various times of the day, being at 14:00 o'clock the prominence time to others.

Palvelun laatu tapahtumatuotantoyksikössä

Palvelun laatu on monimuotoinen asetelma, johon vaikuttavat palveluntarjoajan ja asiakkaan yhteistoiminta, kuten myös vuorovaikutustekijät. Kuitenkaan asiakasnäkökulmasta katsottuna palvelun laadun arviointi ei liity ainoastaan yhteen tekijään, vaan koko tuotantoprosessin aikana tapahtuviin asioihin, jota palveluntarjoaja ja asiakas yhdessä toteuttavat. Tämän tutkimuksen aihealue keskittyy siihen millainen on tapahtumatuotantoyksikön palvelun laatu, mitkä tekijät tähän vaikuttavat ja mitkä tekijät nousevat esille erityisen voimakkaina. Keskeisemmät teoriataustat liittyvät palvelun ja tavaratuotannon eroavaisuuksiin, palvelun prosessimaiseen luonteeseen, asiakasarvoon, sekä palvelun laadun eri näkökulmiin. Palvelun laatua tässä tutkimuksessa tarkastellaan mallinnetun tapahtumatuotantoyksikön palveluprosessin myötä, jonka kuvaamiseen hyödynnetään Service Blueprinting tekniikkaa. Teoriaosuudessa keskitytään tarkastelemaan palvelun laadun erilaisia malleja, joiden myötä myös tämän tutkimuksen mittaamiselle saatiin luotua oma pohja. Tutkimuksen tiedonkeruumenetelmänä käytetään aineistotriangulaatiota. Tutkimuksen ensimmäisessä vaiheessa käytetään kvantitatiivista tutkimusmenetelmää, kyselylomakkeen muodossa ja toisessa vaiheessa kvalitatiivista tutkimusmenetelmää, teema- ja puolistrukturoidun haastattelun muodossa. Tutkimuksen tulokset kertovat tapahtumatuotantoprosessin palvelu laadun tilan, sekä siihen sisältyvät vahvuudet ja heikkoudet. Myös tapahtumatuotantotyöhön vaikuttavat palvelun laadun tekijät, tuotiin esille tutkimuksen kautta.

Practical Framework for Monitoring the Performance of Agile IT Projects in an Output-Based Outsourcing Context

Over the past decade, organizations worldwide have begun to widely adopt agile software development practices, which offer greater flexibility to frequently changing business requirements, better cost effectiveness due to minimization of waste, faster time-to-market, and closer collaboration between business and IT. At the same time, IT services are continuing to be increasingly outsourced to third parties providing the organizations with the ability to focus on their core capabilities as well as to take advantage of better demand scalability, access to specialized skills, and cost benefits. An output-based pricing model, where the customers pay directly for the functionality that was delivered rather than the effort spent, is quickly becoming a new trend in IT outsourcing allowing to transfer the risk away from the customer while at the same time offering much better incentives for the supplier to optimize processes and improve efficiency, and consequently producing a true win-win outcome. Despite the widespread adoption of both agile practices and output-based outsourcing, there is little formal research available on how the two can be effectively combined in practice. Moreover, little practical guidance exists on how companies can measure the performance of their agile projects, which are being delivered in an output-based outsourced environment. This research attempted to shed light on this issue by developing a practical project monitoring framework which may be readily applied by organizations to monitor the performance of agile projects in an output-based outsourcing context, thus taking advantage of the combined benefits of such an arrangement Modified from action research approach, this research was divided into two cycles, each consisting of the Identification, Analysis, Verification, and Conclusion phases. During Cycle 1, a list of six Key Performance Indicators (KPIs) was proposed and accepted by the professionals in the studied multinational organization, which formed the core of the proposed framework and answered the first research sub-question of what needs to be measured. In Cycle 2, a more in-depth analysis was provided for each of the suggested Key Performance Indicators including the techniques for capturing, calculating, and evaluating the information provided by each KPI. In the course of Cycle 2, the second research sub-question was answered, clarifying how the data for each KPI needed to be measured, interpreted, and acted upon. Consequently, after two incremental research cycles, the primary research question was answered describing the practical framework that may be used for monitoring the performance of agile IT projects delivered in an output-based outsourcing context. This framework was evaluated by the professionals within the context of the studied organization and received positive feedback across all four evaluation criteria set forth in this research, including the low overhead of data collection, high value of provided information, ease of understandability of the metric dashboard, and high generalizability of the proposed framework.

Design of salient pole PM synchronous machines for a vehicle traction application – Analysis and

This doctoral thesis presents a study on the development of a liquid-cooled frame salient pole permanent-magnet-exited traction machine for a four-wheel-driven electric car. The emphasis of the thesis is put on a radial flux machine design in order to achieve a light-weight machine structure for traction applications. The design features combine electromagnetic and thermal design methods, because traction machine operation does not have a strict operating point. Arbitrary load cycles and the flexible supply require special attention in the design process. It is shown that accurate modelling of the machine magnetic state is essential for high-performance operation. The saturation effect related to the cross-saturation has to be taken carefully into account in order to achieve the desired operation. Two prototype machines have been designed and built for testing: one totally enclosed machine with a special magnet module pole arrangement and another through-ventilated machine with a more traditional embedded magnet structure. Both structures are built with magnetically salient structures in order to increase the torque production capability with the reluctance torque component. Both machine structures show potential for traction usage. However, the traditional embedded magnet design turns out to be mechanically the more secure one of these two machine options.

Keskusteluja vuokratyöstä. Vuokratyön diskursiivinen rakentuminen Suomessa

1990-luvun alussa lainsäädäntö ja työmarkkinajärjestöt määrittelivät Suomessa, että vuokratyötä tuli käyttää vain tilapäiseen työvoimatarpeeseen, esimerkiksi sijaisuuksiin ja ruuhkahuippuihin. Joillakin aloilla vuokratyö oli työnantajien ja työntekijöiden yhteissopimuksella kielletty. Vaikka vuokratyösuhteet saivat jo 1980-luvulla niin Suomessa kuin kansainvälisestikin maineen työsuhdekeinotteluna, alkoi vuokratyön määrä Suomessa kasvaa 1990-luvun puolivälissä ja erityisesti tultaessa 2000-luvulle. Suomalaiset akateemiset tutkijat eivät ole juuri vuokratyöstä kiinnostuneet. Aiemmat, harvalukuiset tutkimukset ovat keskittyneet lähinnä työyhteisöjen ja työntekijöiden kokemuksiin sekä vuokratyön työehtoihin. Vuokratyö ymmärretäänkin edelleen lähinnä työntekijän subjektiivisena kokemuksena. Vuokratyössä on kuitenkin kysymys paitsi kokemuksista, myös yhteiskunnallisesta valtakamppailusta, jossa diskursiivisin keinoin pyritään vaikuttamaan ilmiöön nimeltä vuokratyö, laajemmin ilmiöön nimeltä työmarkkinat, sekä toisaalta kansalaisten käsityksiin työelämän ”normaalista”. Käsillä oleva tutkimus laajentaa ymmärrystä vuokratyöstä tarkastelemalla ilmiötä lainsäädännön, uutisoinnin ja markkinoinnin rakentamien julkisten käsitysten ja merkityksenantojen kautta. Teoreettisena viitekehyksenä käytän hallinnan ja työprosessin säätelyn teoriaperinteitä. Se, miten työmarkkinoiden muutosta ja uusia työsuhdemuotoja politiikassa, mediassa, lainsäädännössä, tai työpaikan kahvipöytäkeskusteluissa perustellaan ja tehdään ymmärrettäväksi, on samalla työelämään kiinnitettävien arvojen, merkitysten ja toimijuuksien luomista, rajaamista ja kuvailua. Työelämäpuheessa ei siis ole kyse vain talouden lainalaisuuksista, kansantalouden toimivuudesta, tai yritysten kilpailukyvystä, vaan myös ja erityisesti niiden toimijoiden luomisesta, määrittelemisestä ja legitimoimisesta, jotka työelämän kentällä saavat toimia ja tulevat palkituiksi. Säätelyn ja hallinnan näkökulmasta on relevanttia tarkastella millaisilla käsitteillä ja merkityksillä vuokratyötä ilmiönä rakennetaan . Tutkimuskysymyksinä esitän: 1) Miten ja millä perusteilla vuokratyöstä rakennettiin Suomessa legitiimi tapa työllistää ja työllistyä? 2) Millaisia työntekijäideaaleja vuokratyöhön liittyvissä keskusteluissa rakennetaan? Tutkimusaineistona tarkastelen lainsäädäntöön liittyviä dokumentteja, Helsingin Sanomien uutisointia, vuokratyöyritysten markkinointimateriaaleja, sekä vuokratyöyritysten edustajien haastatteluita. Analyysimenetelmänä käytän kriittistä diskurssianalyysia. Tämä menetelmä mahdollistaa puheen ja dokumenttien tarkastelun sosiaalisena toimintana, jolla eri toimijat pyrkivät osallistumaan yhteiskunnassa hyväksyttyjen ja tunnustettujen käsitysten ja toimintavaihtoehtojen rakentamis-, tulkinta- ja määrittelyprosesseihin. Tutkimukseni päätuloksena esitän, että vuokratyöstä muodostui legitiimi tapa työllistää Suomessa 1990-luvulla, koska vuokratyö käsitteellistettiin sekä lainsäädännön että median diskursseissa ennen kaikkea ratkaisuksi työttömyyteen. Toisaalta vuokratyö käsitteellistettiin vain marginaalisten työntekijäryhmien (naiset ja opiskelijat) rooliksi, jolloin se ei liittynyt miesvaltaisten työpaikkojen arkeen. Ratkaisuna työttömyyteen vuokratyö myös samalla luonnollistettiin osaksi yleisempää työmarkkinakehitystä, jolle ”kukaan ei voi mitään”. 2000-luvulla vuokratyö jatkoi voittokulkuaan ja rakentui pysyväksi ilmiöksi, koska työlainsäädännön uudistus institutionalisoi vuokratyön työehtosopimusmenettelyyn, jolloin sen ”salonkikelpoisuus” ja normaalius vahvistettiin. Vaikka työehtosopimusasia oli ratkaisuna merkittävä, nousi vuokratyön osalta itse työehtosopimus tärkeämmäksi kuin sen sisältö. Työehtosopimuksilla ei kuitenkaan pystytty vaikuttamaan esimerkiksi vuokratyöntekijän olemattomaan työsuhdeturvaan. Lisäksi työnantajapuhe käsitteellistää vuokratyön 2000-luvulla ennen kaikkea työmarkkinavaihtoehdoksi, vapautta ja monipuolisia työkokemuksia tarjoavaksi työmarkkinoiden katalysaattoriksi. Vuokratyö on tässä merkitysavaruudessa työntekijöille ”vain” yksi tapa työllistyä ja löytää oma tiensä työmarkkinoille, ei suinkaan työnantajien sanelema pakko. Työntekijöihin kohdistuva hallintapuhe niin mediassa kuin työnantajien haastatteluissakin pyrkii puolestaan rakentamaan ideaalityöntekijäkuvaksi yrittäjämäisen oman elämänsä toimitusjohtajan. Työnantajien diskursseissa kaikuvatkin työntekijään kohdistuva vaatimus itse itsensä ohjaamisesta sekä työntekijäidentiteetin muotoilemisesta joustavuutta, sopeutuvuutta, vaihtelua ja jatkuvaa muutosta vähintäänkin sietäväksi, mutta mieluiten näitä ominaisuuksia jopa aktiivisesti hakevaksi ja arvostavaksi. Työmarkkinoiden toimijana on nimenomaisesti yksilö, jonka mahdollisuudet menestyä ovat vain ja ainoastaan hänen omissa käsissään. Työntekijän roolin korostaminen aktiivisena toimijana ja vuokratyöstä ”oikeita”, norminmukaisia sisältöjä löytävänä pärjääjänä on diskursiivisesti hallittua yritystä ohjata työntekijöitä näkemään sekä itsensä tietynlaisina toimijoina että työmarkkinat tietyllä tavalla toimivina. Vuokratyössä ei ole kyse vain työntekijöiden yksilöllisistä tai yksittäisistä kokemuksista. Vuokratyö on yhteiskunnallisen merkityskamppailun tulos, jossa käyttövoimana ovat toimineet hallinnalliset ja säätelyyn pyrkivät käsitteellistykset työllisyydestä, yksilön valinnasta ja koko yhteiskunnan edusta. Hallinnan ja säätelyn näkökulmasta katsottuna vuokratyö on myös merkinnyt säätelyn liukumista tasa-arvoa, yhdenmukaista kohtelua ja työntekijän suojelua korostavasta viranomaisten ja poliittisten toimijoiden suorittamasta työmarkkinoiden kollektiivisesta säätelystä työnantajien ylläpitämään työntekijän persoonan ja käyttäytymisen hegemoniseen, yksilölliseen säätelyyn.

JNK, a versatile regulator of kinesin-1 transport and cytoskeleton dynamics

C-Jun N-terminal kinase (JNK) is traditionally recognized as a crucial factor in stress response and inducer of apoptosis upon various stimulations. Three isoforms build the JNK subfamily of MAPK; generally expressed JNK1 and JNK2 and brain specific JNK3. Degenerative potency placed JNK in the spotlight as potential pharmacological option for intervention. Unfortunately, adverse effects of potential drugs and observation that expression of only JNK2 and JNK3 are induced upon stress, restrained initial enthusiasm. Notably, JNK1 demonstrated atypical high constitutive activity in neurons that is not responsive to cellular stresses and indicated existence of physiological activity. This thesis aimed at revealing the physiological functions of JNK1 in actin homeostasis through novel effector MARCKS-Like 1 (MARCKSL1) protein, neuronal trafficking mediated by major kinesin-1 motor protein and microtubule (MT) dynamics via STMN2/SCG10. The screen for novel physiological JNK substrates revealed specific phosphorylation of C-terminal end of MARCKSL1 at S120, T148 and T183 both ex vivo and in vitro. By utilizing site-specific mutagenesis, various actin dynamics and migrations assays we were able to demonstrate that JNK1 phosphorylation specifically facilitates F-actin bundling and thus filament stabilisation. Consecutively, this molecular mechanism was proved to enhance formation of filopodia; cell surface projections that allow cell sensing surrounding environment and migrate efficiently. Our results visualize JNK dependent and MARCKSL1 executed induction of filopodia in neurons and fibroblast indicating general mechanism. Subsequently, inactivation of JNK action on MARCKSL1 shifts cellular actin machinery into lamellipodial dynamic arrangement. Tuning of actin cytoskeleton inevitably melds with cell migration. We observed that both active JNK and JNK pseudo-phosphorylated form of MARCKSL1 reduce actin turnover in intact cells leading to overall diminished cell motility. We demonstrate that tumour transformed cells from breast, prostate, lung and muscle-derived cancers upregulate MARCKSL1. We showed on the example of prostate cancer PC-3 cell line that JNK phosphorylation negatively controls MARCKSL1 ability to induce migration, which precedes cancer cell metastasis. The second round of identification of JNK physiological substrates resulted in detection of predominant motor protein kinesin-1 (Kif5). Mass spectrometry detailed analysis showed evident endogenous phosphorylation of kinesin-1 on S176 within motor domain that interacts with MT. In vitro phosphorylation of bacterially expressed kinesin heavy chain by JNK isoforms displayed higher specificity of JNK1 when compared to JNK3. Since, JNK1 is constitutively active in neurons it signified physiological aspect of kinesin-1 regulation. Subsequent biochemical examination revealed that kinesin-1, when not phosphorylated on JNK site, exhibits much higher affinity toward MTs. Expression of the JNK non-phosphorable kinesin-1 mutant in intact cells as well as in vitro single molecule imaging using total internal reflection fluorescence microscopy indicated that the mutant loses normal speed and is not able to move processively into proper cellular compartments. We identify novel kinesin-1 cargo protein STMN2/SCG10, which along with known kinesin-1 cargo BDNF is showing impaired trafficking when JNK activity is inhibited. Our data postulates that constitutive JNK activity in neurons is crucial for unperturbed physiologically relevant transport of kinesin-1 dependant cargo. Additionally, my work helps to validate another novel physiological JNK1 effector STMN2/SCG10 as determinant of axodendritic neurites dynamics in the developing brain through regulation of MT turnover. We show successively that this increased MT dynamics is crucial during developmental radial migration when brain layering occurs. Successively, we are able to show that introduction of JNK phosphorylation mimicking STMN2/SCG10 S62/73D mutant rescues completely JNK1 genetic deletion migration phenotype. We prove that STMN2/SCG10 is predominant JNK effector responsible for MT depolymerising activity and neurite length during brain development. Summarizing, this work describes identification of three novel JNK substrates MARCKSL1, kinesin-1 and STMN2/SCG10 and investigation of their roles in cytoskeleton dynamics and cargo transport. This data is of high importance to understand physiological meaning of JNK activity, which might have an adverse effect during pharmaceutical intervention aiming at blocking pathological JNK action.