Anastomose cavo-pulmonar associada ao suporte circulatório esquerdo comparada à assistência biventricular na falência cardíaca aguda

OBJETIVO: Este estudo avaliou o desempenho hemodinâmico e as alterações miocárdicas decorrentes do emprego de dispositivos de assistência ventricular esquerda (DAVE), associado ou não à descompressão do ventrículo direito por meio de derivação cavo-pulmonar, sendo esses achados comparados ao emprego de assistência circulatória biventricular. MÉTODOS: Vinte e um suínos foram submetidos à indução de insuficiência cardíaca através de fibrilação ventricular, sendo a atividade circulatória mantida por DAVE durante 180 minutos. No grupo controle, foi apenas implantado o DAVE. No grupo derivação, além do DAVE foi realizada cirurgia de derivação cavo-pulmonar. No grupo biventricular, foi instituída assistência biventricular. Foram monitoradas as pressões intracavitárias por 3 horas de assistência e amostras do endocárdio dos dois ventrículos foram coletadas e analisadas à microscopia óptica e eletrônica. RESULTADOS: O lactato sérico foi significativamente menor no grupo biventricular (P=0,014). A diferença observada entre o fluxo do DAVE nos grupos derivação e controle (+55±14 ml/kg/min, P=0,072) não foi significativa, enquanto que o fluxo no grupo biventricular foi significativamente maior (+93±17 ml/kg/min, P=0,012) e se manteve estável durante o experimento. A pressão arterial média (PAM) se manteve constante apenas no grupo biventricular (P<0,001), que também apresentou diminuição significativa das pressões em câmaras direitas. Na análise ultraestrutural, notou-se menor presença edema miocárdico no ventrículo direito no grupo biventricular (P=0,017). CONCLUSÃO: Os resultados apresentados demonstram que o desempenho hemodinâmico da assistência ventricular esquerda associada à derivação cavo-pulmonar, neste modelo experimental, não foi superior ao observado com a assistência de ventrículo esquerdo isolada e não substituiu a assistência biventricular de maneira efetiva.

Bioremediation of PAHs - Limitations and soultions

Introduction 1.1 Occurrence of polycyclic aromatic hydrocarbons (PAH) in the environment Worldwide industrial and agricultural developments have released a large number of natural and synthetic hazardous compounds into the environment due to careless waste disposal, illegal waste dumping and accidental spills. As a result, there are numerous sites in the world that require cleanup of soils and groundwater. Polycyclic aromatic hydrocarbons (PAHs) are one of the major groups of these contaminants (Da Silva et al., 2003). PAHs constitute a diverse class of organic compounds consisting of two or more aromatic rings with various structural configurations (Prabhu and Phale, 2003). Being a derivative of benzene, PAHs are thermodynamically stable. In addition, these chemicals tend to adhere to particle surfaces, such as soils, because of their low water solubility and strong hydrophobicity, and this results in greater persistence under natural conditions. This persistence coupled with their potential carcinogenicity makes PAHs problematic environmental contaminants (Cerniglia, 1992; Sutherland, 1992). PAHs are widely found in high concentrations at many industrial sites, particularly those associated with petroleum, gas production and wood preserving industries (Wilson and Jones, 1993). 1.2 Remediation technologies Conventional techniques used for the remediation of soil polluted with organic contaminants include excavation of the contaminated soil and disposal to a landfill or capping - containment - of the contaminated areas of a site. These methods have some drawbacks. The first method simply moves the contamination elsewhere and may create significant risks in the excavation, handling and transport of hazardous material. Additionally, it is very difficult and increasingly expensive to find new landfill sites for the final disposal of the material. The cap and containment method is only an interim solution since the contamination remains on site, requiring monitoring and maintenance of the isolation barriers long into the future, with all the associated costs and potential liability. A better approach than these traditional methods is to completely destroy the pollutants, if possible, or transform them into harmless substances. Some technologies that have been used are high-temperature incineration and various types of chemical decomposition (for example, base-catalyzed dechlorination, UV oxidation). However, these methods have significant disadvantages, principally their technological complexity, high cost , and the lack of public acceptance. Bioremediation, on the contrast, is a promising option for the complete removal and destruction of contaminants. 1.3 Bioremediation of PAH contaminated soil & groundwater Bioremediation is the use of living organisms, primarily microorganisms, to degrade or detoxify hazardous wastes into harmless substances such as carbon dioxide, water and cell biomass Most PAHs are biodegradable unter natural conditions (Da Silva et al., 2003; Meysami and Baheri, 2003) and bioremediation for cleanup of PAH wastes has been extensively studied at both laboratory and commercial levels- It has been implemented at a number of contaminated sites, including the cleanup of the Exxon Valdez oil spill in Prince William Sound, Alaska in 1989, the Mega Borg spill off the Texas coast in 1990 and the Burgan Oil Field, Kuwait in 1994 (Purwaningsih, 2002). Different strategies for PAH bioremediation, such as in situ , ex situ or on site bioremediation were developed in recent years. In situ bioremediation is a technique that is applied to soil and groundwater at the site without removing the contaminated soil or groundwater, based on the provision of optimum conditions for microbiological contaminant breakdown.. Ex situ bioremediation of PAHs, on the other hand, is a technique applied to soil and groundwater which has been removed from the site via excavation (soil) or pumping (water). Hazardous contaminants are converted in controlled bioreactors into harmless compounds in an efficient manner. 1.4 Bioavailability of PAH in the subsurface Frequently, PAH contamination in the environment is occurs as contaminants that are sorbed onto soilparticles rather than in phase (NAPL, non aqueous phase liquids). It is known that the biodegradation rate of most PAHs sorbed onto soil is far lower than rates measured in solution cultures of microorganisms with pure solid pollutants (Alexander and Scow, 1989; Hamaker, 1972). It is generally believed that only that fraction of PAHs dissolved in the solution can be metabolized by microorganisms in soil. The amount of contaminant that can be readily taken up and degraded by microorganisms is defined as bioavailability (Bosma et al., 1997; Maier, 2000). Two phenomena have been suggested to cause the low bioavailability of PAHs in soil (Danielsson, 2000). The first one is strong adsorption of the contaminants to the soil constituents which then leads to very slow release rates of contaminants to the aqueous phase. Sorption is often well correlated with soil organic matter content (Means, 1980) and significantly reduces biodegradation (Manilal and Alexander, 1991). The second phenomenon is slow mass transfer of pollutants, such as pore diffusion in the soil aggregates or diffusion in the organic matter in the soil. The complex set of these physical, chemical and biological processes is schematically illustrated in Figure 1. As shown in Figure 1, biodegradation processes are taking place in the soil solution while diffusion processes occur in the narrow pores in and between soil aggregates (Danielsson, 2000). Seemingly contradictory studies can be found in the literature that indicate the rate and final extent of metabolism may be either lower or higher for sorbed PAHs by soil than those for pure PAHs (Van Loosdrecht et al., 1990). These contrasting results demonstrate that the bioavailability of organic contaminants sorbed onto soil is far from being well understood. Besides bioavailability, there are several other factors influencing the rate and extent of biodegradation of PAHs in soil including microbial population characteristics, physical and chemical properties of PAHs and environmental factors (temperature, moisture, pH, degree of contamination). Figure 1: Schematic diagram showing possible rate-limiting processes during bioremediation of hydrophobic organic contaminants in a contaminated soil-water system (not to scale) (Danielsson, 2000). 1.5 Increasing the bioavailability of PAH in soil Attempts to improve the biodegradation of PAHs in soil by increasing their bioavailability include the use of surfactants , solvents or solubility enhancers.. However, introduction of synthetic surfactant may result in the addition of one more pollutant. (Wang and Brusseau, 1993).A study conducted by Mulder et al. showed that the introduction of hydropropyl-ß-cyclodextrin (HPCD), a well-known PAH solubility enhancer, significantly increased the solubilization of PAHs although it did not improve the biodegradation rate of PAHs (Mulder et al., 1998), indicating that further research is required in order to develop a feasible and efficient remediation method. Enhancing the extent of PAHs mass transfer from the soil phase to the liquid might prove an efficient and environmentally low-risk alternative way of addressing the problem of slow PAH biodegradation in soil.

Ricostruire L'Aquila: proposta di edificio residenziale a corte

Il 6 aprile 2009 una scossa sismica del sesto grado della scala Richter ha colpito la città dell'Aquila e i centri urbani limitrofi, provocando ingenti danni e la quasi totale distruzione del centro storico aquilano. Il sisma ha provocato più di 300 vittime e 65000 sfollati sistemati in tendopoli, alberghi e moduli abitativi provvisori. Risolta l'emergenza dei primi mesi ci si trova ad affrontare il problema della ricostruzione vera e propria della città, la quale non può prescindere dalle decisioni sul futuro del centro storico. La parte "intra moenia" dell'Aquila è il centro nevralgico della città, qui si trovano i caratteri identitari di essa, i quali si perdono appena oltrepassata la cinta muraria. Il tessuto che parte dalle porte urbiche e prosegue verso la periferia è infatti frammentario e disorganizzato. Scopo principale del progetto è quello di fornire un'idea concreta per la ricostruzione del quartiere di Santa croce, una parte di centro storico ad oggi priva di identità e quasi interamente distrutta dal sisma. Accanto alle necessità di ricostruire alloggi e servizi, si pone l'obiettivo di fondare un nuovo quartiere che riprenda i tracciati storici e completi questa parte della città con una nuova identità legata al passato della stessa.

Ricostruire L'Aquila: edifici residenziali nel verde

Nell'aprile 2009 la città dell'Aquila e le zone limitrofe sono state interessate da uno sciame sismico che ha raggiunto l'apice della sua intensità durante la notte del 6 aprile, facendo registrare ai sismografi il sesto grado della scala Richter. Le conseguenze del sisma sono state devastanti, numerose le vittime e gli sfollati; ingenti i danni alla città. Molti edifici, in particolare nel centro storico, sono stati interessati da numerosi crolli o da danni spesso irreversibili, la situazione post-calamità ha quindi posto il grande problema della ricostruzione di una città consolidata. Partendo da questi presupposti il progetto si pone come obiettivo di fornire una proposta concreta per la ricostruzione dell'area di centro storico compresa fra la zona della ex chiesa di Santa Croce e il viale Duca Degli Abruzzi, tentando di ricostruire e riqualificare il tessuto che si affaccia su via Roma; Decumano della città storica. La necessità di ricostruire una parte così significativa della città ha condotto a delle riflessioni sulla natura stessa del luogo e della sua evoluzione. Si sono così potuti mettere a fuoco un certo numero di problemi urbanistici e architettonici che dal primo dopoguerra ad oggi hanno via via cambiato i caratteri fondamentali dell'area di progetto come dell'intera città; sviluppando quest'ultima in maniera piuttosto inorganica e contaminando la struttura originaria del centro storico. Il progetto vuole quindi cogliere l'occasione per riorganizzare parte del tessuto, rifacendosi ai principi generatori e ai caratteri della forma originaria dell'Aquila. Gli edifici progettati perseguono obiettivi molteplici e a volte discordanti ad esempio l' ottima qualità dell'abitare e l'economicità sono due importanti caratteristiche che si è cercato di unire tramite tecnologie votate all'efficienza energetica, alla semplificazione del cantiere e alla semiprefabbricazione. Tali strumenti tecnologici sono molto utili a razionalizzare e ottimizzare il processo costruttivo, in linea con quelle che sono le esigenze della produzione contemporanea; soprattutto in ambito residenziale.

Metodologie per il miglioramento delle stime di pericolosità sismica in Italia

In questo lavoro di dottorato sono stati analizzati differenti strumenti impiegati per le stime di pericolosità sismica. Facendo riferimento alla Mappa di Pericolosità Sismica Italiana MPS04 (Gruppo di Lavoro MPS, 2004), redatta dall’Istituto Nazionale di Geofisica e Vulcanologia (INGV) e adottata come mappa di riferimento per il territorio nazionale ai sensi dell’Ordinanza PCM 3519 del 28 aprile 2006, All. 1b, è stato approfondito il calcolo dei tassi di sismicità attraverso la relazione di Gutenberg e Richter (1944). In particolare, si è proceduto attraverso un confronto tra i valori ottenuti dagli autori della Mappa (Gruppo di Lavoro MPS, 2004) e i valori ottenuti imponendo un valore costante e unico al parametro b della relazione (Gutenberg e Richter, 1944). Il secondo tema affrontato è stato l’analisi della presenza di eventi di origine non tettonica in un catalogo. Nel 2000 Wiemer e Baer hanno proposto un algoritmo che identifica e rimuove gli eventi di origine antropica. Alla metodologia di Wiemer e Baer (2000) sono state apportate delle modifiche al fine di limitare la rimozione di eventi naturali. Tale analisi è stata condotta sul Catalogo Strumentale della Sismicità Italiana (CSI 1.1; Castello et al., 2006) e sui cataloghi Europei disponibili online: Spagna e Portogallo, Francia, Nord Europa, Repubblica Ceca, Romania, Grecia. L’ultimo argomento trattato ha riguardato la presunta correlazione tra i meccanismi di fagliazione e il parametro b della relazione di Gutenberg e Richter (1944). Nel lavoro di Schorlemmer et al. (2005), tale correlazione è dimostrata calcolando il b-value su una griglia a scala mondiale raggruppando i terremoti in funzione dell’angolo di rake: i valori maggiori del parametro sono misurati per i terremoti che si originano in un regime distensivo, seguono quelli in un regime trascorrente mentre i valori minori si registrano nelle aree a regime compressivo. Il principale ostacolo per una applicazione del metodo al territorio italiano è rappresentato dal numero ridotto di terremoti per i quali è possibile avere indicazioni circa il meccanismo focale della sorgente: la correlazione è stata così valutata calcolando il b-value all’interno delle zone sismogenetiche definite per la realizzazione di MPS04 (Gruppo di Lavoro MPS, 2004), alle quali è stato nuovamente assegnato un meccanismo di fagliazione prevalente attraverso la somma del tensore momento. Sono inoltre allegati lavori altri lavori prodotti nell’ambito della pericolosità sismica.

Archaeological Baltic amber: degradation mechanisms and conservation measures

The aim of this project was to achieve a deep understanding of the mechanisms by which Baltic amber degrades, in order to develop techniques for preventive conservation of archaeological amber objects belonging to the National Museum of Denmark’s collections. To examine deterioration of Baltic amber, a starting point was to identify and monitor surface and bulk properties which are affected during degradation. The way to operate consisted of the use of accelerated ageing to initiate degradation of raw Baltic amber samples in different conditions of relative humidity, oxygen exposure or pH and, successively, of the use of non/micro-destructive techniques to identify and quantify changes in visual, chemical and structural properties. A large piece of raw Baltic amber was used to prepare several test samples for two different kinds of accelerated ageing: thermal-ageing and photo-ageing. During the ageing, amber samples were regularly examined through several analytical techniques related to different information: appearance/colour change by visual examination, photography and colorimetry; chemical change by infrared spectroscopy, Raman spectroscopy and elemental analysis; rate of oxidation by oxygen measurement; qualitative analysis of released volatiles by gas chromatography – mass spectrometry. The obtained results were analysed through both critical evaluation and statistical study. After the interpretation of the achieved data, the main relations between amber and environmental factors during the degradation process became clearer and it was possible to identify the major pathways by which amber degrades, such as hydrolysis of esters into alcohols and carboxylic acids, thermal-oxidation and photo-oxidation of terpenoid components, depolymerisation and decomposition of the chemical structure. At the end it was possible to suggest a preventive conservation strategy based on the control of climatic, atmospheric and lighting parameters in the environment where Baltic amber objects are stored and displayed.

Zuckertransport und Regulation des Hexosestoffwechsels bei Oenococcus oeni

Das Milchsäurebakterium Oenococcus oeni, welches für den biologischen Säureabbau im Wein eingesetzt wird, verstoffwechselt Hexosen über den Phosphoketolaseweg. Dabei können beträchtliche Mengen Acetat entstehen. Die Ursachen dafür wurden untersucht, insbesondere der Fructosestoffwechsel. Außerdem wurde der Hexosetransport untersucht, über den bei O. oeni noch nichts bekannt war. Die Aufnahme von Hexosen in die Zelle erfolgt mit hoher Affinität (KM=10 µM) über einen Symport mit H+, aber mit sehr niedriger spezifischer Aktivität (Vmax=9 U / g TG). Zusätzlich werden Hexosen mit ausreichender Aktivität über (vermutlich erleichterte) Diffusion in die Zelle transportiert, allerdings nur bei hohen Hexosekonzentrationen. Es wurden Gene gefunden, die für ein Hexose- Phosphotransferasesystem kodieren, welches in O. oeni keine bedeutende Rolle beim Transport spielt, aber vermutlich eine regulative Funktion hat. Zur Bildung von Essigsäure tragen verschiedene Faktoren bei: Der Ethanolweg, der in der heterofermentativen Milchsäuregärung die Reoxidation von NAD(P)H bewerkstelligt, ist durch die niedrige spezifische Aktivität der Acetaldehyddehydrogenase limitiert. Diese Limitierung wird noch verstärkt, wenn die zellulären Gehalte von Coenzym A aufgrund von Pantothensäuremangel niedrig sind. O. oeni umgeht durch Bildung von Erythrit die Limitierung, und Acetylphosphat wird nicht zu Ethanol reduziert, sondern als Acetat ausgeschieden. Bei Cofermentation von Hexosen mit externen Elektronenakzeptoren, wie Fructose, Pyruvat oder Sauerstoff, werden letztere zur Reoxidation von NAD(P)H genutzt, und als Folge wird Acetat ausgeschieden. Der Fluss von Fructose in den Phosphoketolaseweg wird durch das Enzym Phosphoglucoseisomerase verhindert, wenn dieses durch 6-Phosphogluconat gehemmt wird. Als Konsequenz wird Fructose im Mannitweg reduziert, was die Bildung von Essigsäure im Phosphoketolaseweg fördert. Bei niedrigen Wachstums- und Stoffwechselraten, z.B. bei C-Limitierung, ist der Ethanolweg nicht limitierend für den Stoffwechsel, und Hexosen werden über heterofermentative Milchsäuregärung umgesetzt, ohne daß Acetat entsteht. Pyruvat kann gleichzeitig als Elektronenakzeptor und als Energiequelle dienen: O. oeni ist in der Lage, Pyruvat mittels Disproportionierung zu Lactat und Acetat+CO2 zu fermentieren, und dabei Energie zu konservieren (0,5 ATP / Pyruvat).

Regulatorische und supprimierte T-Zellen

Regulatorische T-Zellen (Tregs) sind in der Lage die Proliferation und Cytokin-Produktion konventioneller T-Zellen zu supprimieren, wobei die beteiligten Moleküle weitestgehend unbekannt sind. Im Rahmen dieser Arbeit wurden differentielle Analysen sowohl auf mRNA - als auch auf Proteinebene durchgeführt um Moleküle zu identifizieren, welche präferentiell in regulatorischen bzw. in supprimierten T-Zellen (Tsups) exprimiert werden. Der Transkriptionsfaktor Pur-alpha konnte als präferentiell in murinen Tsups exprimiert identifiziert werden. Die präferentielle Expression von Pur-alpha in murinen Tsups konnte durch quantitative PCR-Analysen bestätigt werden. In humanen Tregs konnte mittels „differentieller Proteom-Analyse“ das Lektin Galectin-10 als das am stärksten präferentiell exprimierte Protein identifiziert werden. Die differentielle Expression von Galectin-10 konnte sowohl auf mRNA-Ebene als auch mit Hilfe eines spezifischen Antiserums gegen Galectin-10 bestätigt werden. Zur Untersuchung einer möglichen Beteiligung von Galectin-10 am anergen Phänotyp sowie an den suppressiven Eigenschaften von Tregs wurde ein Galectin-10-Expressionskonstrukt generiert. Die Überexpression von Galectin-10 in konventionellen T-Zellen führte zur Apoptose der transfizierten Zellen. Die Überexpression von Galectin-10 in der humanen T-Zell-Linie „Jurkat“ konnte hingegen problemlos durchgeführt werden, führte aber nicht zur Vermittlung suppressiver Eigenschaften. Zum Nachweis einer Beteiligung von Galectin-10 an den funktionellen Eigenschaften regulatorischer T-Zellen werden in weiterführenden Versuchen momentan siRNA-Experimente etabliert, um die Galectin-10-Biosynthese in Tregs spezifisch zu unterdrücken.

Physiological and Biochemical Aspects of Iron Nutrition in Grapevine

The objective of this thesis was to study the response mechanisms of grapevine to Fe-deficiency and to potential Fe chlorosis prevention strategies. The results show that the presence of bicarbonate in the nutrient solution shifted the activity of PEPC and TCA cycle enzymes and the accumulation/translocation of organic acids in roots of Fe-deprived plants. The rootstock 140 Ruggeri displayed a typical behavior of calcicole plants under bicarbonate stress. The Fe chlorosis susceptible rootstock 101-14 reacted to a prolonged Fe-deficiency reducing the root activity of PEPC and MDH. Noteworthy, it accumulates high levels of citric acid in roots, indicating a low capacity to utilizing, transporting and/or exudating organic acids into the rhizosfere. In contrast, 110 Richter rootstock is capable to maintain an active metabolism of organic acids in roots, accumulating them to a lesser extent than 101-14. Similarly to 101-14, SO4 genotype displays a strong decrease of mechanisms associated to Fe chlorosis tolerance (PEPC and MDH enzymes). Nevertheless it is able to avoid excessive accumulation of citric acid in roots, similar as 110 Richter rootstock. Intercropping with Festuca rubra increased leaf chlorophyll content and net photosynthesis. In addition, intercropping reduces the activity of PEPC in roots, similary to Fe-chelate supply. Applications of NH4+ with nitrification inhibitor prevents efficiently Fe-deficiency, increases chlorophyll content, and induces similar root biochemical responses as Fe-EDDHA. Without the addition of nitrification inhibitors, the effectiveness of NH4+ supply on Fe chlorosis prevention resulted significantly lower. The aspects intertwined in this investigation highlight the complexity of Fe physiology and the fine metabolic tuning of grapevine genotypes to Fe availability and soil-related environmental factors. The experimental evidences reveal the need to carry out future researches on Fe nutrition maintaining a continous flow of knowledge between theoretical and agronomical perspectives for fully supporting the efforts devoted to convert science into practice.

Structural and strain analysis in the Late Paleozoic coastal accretionary wedge of central Chile

Abstract In this study structural and finite strain data are used to explore the tectonic evolution and the exhumation history of the Chilean accretionary wedge. The Chilean accretionary wedge is part of a Late Paleozoic subduction complex that developed during subduction of the Pacific plate underneath South America. The wedge is commonly subdivided into a structurally lower Western Series and an upper Eastern Series. This study shows the progressive development of structures and finite strain from the least deformed rocks in the eastern part of the Eastern Series of the accretionary wedge to higher grade schist of the Western Series at the Pacific coast. Furthermore, this study reports finite-strain data to quantify the contribution of vertical ductile shortening to exhumation. Vertical ductile shortening is, together with erosion and normal faulting, a process that can aid the exhumation of high-pressure rocks. In the east, structures are characterized by upright chevron folds of sedimentary layering which are associated with a penetrative axial-plane foliation, S1. As the F1 folds became slightly overturned to the west, S1 was folded about recumbent open F2 folds and an S2 axial-plane foliation developed. Near the contact between the Western and Eastern Series S2 represents a prominent subhorizontal transposition foliation. Towards the structural deepest units in the west the transposition foliation became progressively flat lying. Finite-strain data as obtained by Rf/Phi and PDS analysis in metagreywacke and X-ray texture goniometry in phyllosilicate-rich rocks show a smooth and gradual increase in strain magnitude from east to west. There are no evidences for normal faulting or significant structural breaks across the contact of Eastern and Western Series. The progressive structural and strain evolution between both series can be interpreted to reflect a continuous change in the mode of accretion in the subduction wedge. Before ~320-290 Ma the rocks of the Eastern Series were frontally accreted to the Andean margin. Frontal accretion caused horizontal shortening and upright folds and axial-plane foliations developed. At ~320-290 Ma the mode of accretion changed and the rocks of the Western Series were underplated below the Andean margin. This basal accretion caused a major change in the flow field within the wedge and gave rise to vertical shortening and the development of the penetrative subhorizontal transposition foliation. To estimate the amount that vertical ductile shortening contributed to the exhumation of both units finite strain is measured. The tensor average of absolute finite strain yield Sx=1.24, Sy=0.82 and Sz=0.57 implying an average vertical shortening of ca. 43%, which was compensated by volume loss. The finite strain data of the PDS measurements allow to calculate an average volume loss of 41%. A mass balance approximates that most of the solved material stays in the wedge and is precipitated in quartz veins. The average of relative finite strain is Sx=1.65, Sy=0.89 and Sz=0.59 indicating greater vertical shortening in the structurally deeper units. A simple model which integrates velocity gradients along a vertical flow path with a steady-state wedge is used to estimate the contribution of deformation to ductile thinning of the overburden during exhumation. The results show that vertical ductile shortening contributed 15-20% to exhumation. As no large-scale normal faults have been mapped the remaining 80-85% of exhumation must be due to erosion.

Meccanismi focali e distribuzione magnitudo-frequenza dei terremoti su scala globale ed euromediterranea

La tesi ha come obiettivo l’analisi della correlazione dello stile tettonico, in termini di deformazione sismica, con il b-value della relazione magnitudo-frequenza di occorrenza (Gutenberg e Richter, 1944) in area globale ed euro-mediterranea. L’esistenza di una dipendenza funzionale tra il b-value e gli angoli di rake, del tipo di quella segnalata da Schorlemmer et al. (2005) e Gulia e Wiemer (2010), viene confermata prima su scala globale e poi su scala euro-mediterranea, a partire dai dati dei principali dataset di tensori momento delle aree in esame, il Global Centroid Moment Tensor (GCMT) ed il Regional Centroid Moment Tensor (RCMT). La parte innovativa della tesi consiste invece nell’incrocio di tali dataset con un database globale di terremoti, l’International Seismological Center (ISC), con magnitudo momento omogenea rivalutata in accordo con Lolli et al. (2014), per il calcolo del b-value. Il campo di deformazione sismica viene ottenuto attraverso il metodo della somma dei tensori momento sismico secondo Kostrov (1974) su pixelizzazioni a celle quadrate o esagonali. All’interno di ciascuna cella, le componenti del tensore di ciascun terremoto vengono sommate tra loro e dal tensore somma vengono estratte le direzioni dei piani principali della migliore doppia coppia. Il sub-catalogo sismico per il calcolo del b-value, ottenuto come scomposizione di quello globale ISC, viene invece ricavato per ogni cluster di celle comprese all'interno di un opportuno range di rake, le quali condividono un medesimo stile tettonico (normale, inverso o trascorrente). La magnitudo di completezza viene valutata attraverso i metodi di massima verosimiglianza [Bender, 1983] ed EMR [Woessner e Wiemer 2005]. La retta di interpolazione per il calcolo del b-value viene costruita quindi secondo il metodo di massima verosimiglianza [Bender, 1983] [Aki 1965]. L’implementazione nel linguaggio del software Matlab® degli algoritmi di pixelizzazione e di costruzione dei tensori somma, l’utilizzo di funzioni di calcolo dal pacchetto Zmap [Wiemer e Wyss, 2001], unite al lavoro di traduzione di alcune routines [Gasperini e Vannucci (2003)] dal linguaggio del FORTRAN77, hanno costituito la parte preliminare al lavoro. La tesi è strutturata in 4 capitoli.Nel primo capitolo si introducono le nozioni teoriche di base riguardanti i meccanismi focali e la distribuzione magnitudo-frequenza, mentre nel secondo capitolo l’attenzione viene posta ai dati sismici dei database utilizzati. Il terzo capitolo riguarda le procedure di elaborazione dati sviluppate nella tesi. Nel quarto ed ultimo capitolo infine si espongono e si discutono i risultati sperimentali ottenuti, assieme alle conclusioni finali.

Biochemische Untersuchungen des Lichtsammlerprotein (LHCP) im Komplex mit seinem Chaperon, dem plastidären Signalerkennungspartikel cpSRP

Das Lichtsammlerprotein (light harvesting chlorophyll a/b-binding protein, LHCP) ist das Apoprotein des Haupt-Lichtsammelkomplexes (LHCII) und stellt das häufigste Membranprotein der Erde dar. Nicht nur aufgrund seiner Abundanz, sondern auch wegen seiner speziellen Translokation als stark hydrophobes Membranprotein durch hauptsächlich wässrige Milieus von cytosolischen Ribosomen bis in die Thylakoidmembran der Chloroplasten ist der Biogeneseweg dieses Proteins von besonderem Interesse. LHCP ist kernkodiert und wird nach seinem Import in Chloroplasten als Transitkomplex mit dem stromalen Signalerkennungsprotein (cpSRP) zur Thylakoide geleitet. Der cpSRP-Komplex besteht aus dem cpSRP43 mit Chaperonfunktion für das LHCP sowie dem Co-Chaperon cpSRP54, welches eine entscheidende Rolle in der stromalen Zielführung des Transitkomplexes spielt. Sowohl die Proteinkonformation des LHCP während seiner Biogenese als auch der in vivo Faltungsablauf während der Thylakoidinsertion sind noch völlig unklar. Mithilfe der Elektronen-paramagnetischen Resonanz (EPR-)Spektroskopie sollte in dieser Arbeit der Faltungszustand des LHCP im Transitkomplex mit dem cpSRP oder in Teilkomplexen davon ermittelt werden.rnKopplungen von cpSRP43 und LHCP bestätigten, dass das Chaperon als Minimaleinheit zur quantitativen Solubilisierung des Membranproteins genügt. Gelfiltrationschromatographische (GFC-) Untersuchungen solcher Komplexe wiesen jedoch mit einem apparenten MW von ≥ 600 kDa ein sehr hochmolekulares Laufverhalten auf. Variierende Proteinstöchiometrien im Komplex zeigten in densitometrischen Auswertungen eine undefinierte Aggregation. Zusätze von Agenzien zur Vermeidung unspezifischer Wechselwirkungen wie z.B. Detergentien oder auch Salzzugabe zeigten keinen Einfluss auf die Aggregate. Volllängen-Transitkomplexe dagegen wiesen trotz unterschiedlichem Angebot von Einzelproteinen reproduzierbar definierte Stöchiometrien auf. Diese zeigten eine LHCP:cpSRP43-Stöchiometrie von 1,25. Dennoch hatten diese Komplexe mit einem apparenten MW von > 300 kDa einen mindestens dimeren Assemblierungsgrad. Eine Voraussetzung für eindeutige EPR-spektroskopische Distanzmessungen zwischen definierten Positionen im LHCP ist jedoch dessen monomolekularisiertes Vorliegen im Chaperonkomplex. Die Darstellung von ternären Transitkomplexen mit einem zu erwartenden apparenten MW von ~175 kDa war auch durch Zusatz verschiedener Proteinaggregationshemmer nicht möglich. Transitkomplexe mit einer verkürzten Version des cpSRP54 zeigten schließlich eine definierte 1:1-Komplexstöchiometrie bei gleichzeitiger polydisperser Komplexzusammensetzung. Es konnten ~60% dieser sogenannten 54M-Transitkomplexe nach GFC-Daten und densitometrischer Auswertung als potentiell ternär eingeschätzt werden. Darüber hinaus gelang es solche Ansätze durch GFC-Fraktionierung zusätzlich von oligomerisierten Spezies aufzureinigen. Dennoch zeigten die Präparate vor GFC-Fraktionierung ein (noch) zu hohes Aggregationssignal im Hintergrund und nach Fraktionierung ein zu schwaches Signal, um eine eindeutige Aussage der EPR-Daten zuzulassen. Dennoch bietet dieses ausgearbeitete Komplexbildungsprotoll in Verbindung mit der Verwendung von verkürztem cpSRP54 eine solide Basis, um weitere Versuche zu EPR-Messungen an cpSRP-gebundenem LHCP durchzuführen. rn

Implementierung der Laserionenquellenfalle LIST bei ISOLDE und Validierung der Spezifikationen Effizienz und Selektivität

Die Funktionsweise der Laserionenquellenfalle LIST, sowie deren Implementierung bei der Forschungseinrichtung ISOLDE am CERN als neue Standard-Ionenquelle und die ermittelten Spezifikationen Effizienz und Selektivität werden vorgestellt.rnrnDurch die Implementierung der LIST bei ISOLDE konnte on-line mit Hilfe von Radionukliden ein Minimalwert zur Unterdrückung von Kontaminationen durch die LIST bestimmt werden. Die erfolgreiche Unterdrückung von Francium-Kontamination ermöglichte es, neue Messdaten für den mittleren Ladungsradius und die Hyperfeinstruktur für Po-217 zu erzeugen.rnrnUm die Funktionalität der LIST bei ISOLDE hinsichtlich der Ionisationseffizienz gegenüber anderen Ionenquellen einzuordnen, wurden in Mainz am RISIKO-Massenseparator mit der bereits existierenden Standard-Ionenquelle RILIS und der LIST die Effizienzen bestimmt und miteinander verglichen. Es konnte gezeigt werden, dass die LIST im Modus hoher Ionisationseffizienz eine vergleichbare Effizienz aufweist wie die RILIS. Im Modus zur Produktion eines hochreinen Ionenstrahls ist die Ionisationseffizienz gegenüber der RILIS reduziert.rnrnDa die Bestimmung der Selektivität im On-line-Betrieb aufwendig und zeitintensiv ist, wurde die Reinheit des Ionenstrahls am RISIKO-Massenseparator mittels Laufzeitmessungen der Ionen off-line bestimmt und analysiert. Die Zeitstrukturen der RILIS ermöglichen einerseits Rückschlüsse auf die Reinheit des Ionenstrahls zu ziehen, andererseits konnte auch die Ionisation außerhalb des Atomisators, in dem überwiegend die resonante Ionisation stattfindet, nachgewiesen werden. Durch diesen Nachweis kann der Effizienzverlust während der Produktion eines hochreinen Ionenstrahls erklärt werden. Zudem bietet er einen Ansatz für weitere Entwicklungsarbeiten der LIST zur Steigerung der Effizienz.rnrnEine Übertragung der Messergebnisse zur Zeitstruktur der RILIS auf die LIST eröffnet neue Möglichkeiten zur Steigerung deren Selektivität im massenselektiven Mode. Dieser wurde anhand von Simulationen überprüft und mit Messungen an Kalium experimentell quantifiziert.

T-cell recognition of chemicals, protein allergens and drugs: towards the development of in vitro assays

Chemicals can elicit T-cell-mediated diseases such as allergic contact dermatitis and adverse drug reactions. Therefore, testing of chemicals, drugs and protein allergens for hazard identification and risk assessment is essential in regulatory toxicology. The seventh amendment of the EU Cosmetics Directive now prohibits the testing of cosmetic ingredients in mice, guinea pigs and other animal species to assess their sensitizing potential. In addition, the EU Chemicals Directive REACh requires the retesting of more than 30,000 chemicals for different toxicological endpoints, including sensitization, requiring vast numbers of animals. Therefore, alternative methods are urgently needed to eventually replace animal testing. Here, we summarize the outcome of an expert meeting in Rome on 7 November 2009 on the development of T-cell-based in vitro assays as tools in immunotoxicology to identify hazardous chemicals and drugs. In addition, we provide an overview of the development of the field over the last two decades.

Effect of intravenous morphine comedication on bile duct visualization, diameter and volume applying intravenous CT cholangiography in a porcine liver model

To determine whether intravenous morphine comedication improves bile duct visualization, diameter and/or volume applying intravenous CT cholangiography in a porcine liver model.