Inibidor da ação do etileno na conservação pós-colheita de Chrysanthemum morifolium Ramat cv. Dragon

A durabilidade e a qualidade pós-colheita de flores de corte são atributos fundamentais na sua valoração ao longo da cadeia produtiva e na satisfação dos consumidores. Objetivou-se, nesta pesquisa, verificar o efeito do tiossulfato de prata, associado ou não à sacarose, na manutenção da qualidade pós-colheita de hastes de crisântemos (Chrysanthemum morifolium Ramat cv. Dragon) . O experimento foi conduzido sob delineamento inteiramente casualizado, em esquema fatorial testando soluções de manutenção com tiossulfato de prata (STS), sob cinco níveis (Água destilada; STS a 0,2 mM; STS a 0,2 mM + sacarose a 50 g L-1; STS a 0,4 mM; STS a 0,4 mM + sacarose a 50 g L-1); e data de amostragem, por três níveis (0; 3; 6 dias). Utilizaram-se três repetições com duas hastes florais em cada tratamento. Foram feitas avaliações físicas: coloração, massa fresca e conteúdo relativo de água (CRA); avaliações químicas: açúcares redutores e pigmentos; e avaliações qualitativas: turgescência, cor das flores, e número de botões, flores entreabertas e abertas. O tratamento com 0,2 mM de STS possibilitou melhor manutenção da massa fresca das hastes. A concentração de pigmentos e carboidratos redutores foi maior naqueles tratamentos em que a sacarose foi associada. A coloração e o conteúdo relativo de água foram favorecidos nos tratamentos STS a 0,2 e 0,4mM. A concentração de 0,2 mM de STS foi a que obteve os melhores resultados, prolongando a vida de vaso das hastes. A qualidade das hastes foi superior, tendo as melhores avaliações de conteúdo de água, cor e turgescência.

Soluções de manutenção na pós-colheita de Chrysanthemum morifolium cv. Dragon

O desenvolvimento e uso de técnicas que prolonguem a durabilidade das flores, mantendo a qualidade do produto, é imprescindível para redução de perdas pós-colheita. Objetivou-se, neste trabalho, avaliar soluções de manutenção, associadas ou não a sacarose, na manutenção da qualidade pós-colheita de hastes de crisântemos. O experimento foi conduzido sob delineamento inteiramente casualizado, em esquema fatorial, com cinco tratamentos e três repetições, com 2 hastes florais cada uma. Os tratamentos utilizaram água destilada; 8-HQC a 100 mg L-1; 8-HQC a 100 mg L-1 + sacarose a 50 g L-1, 8-HQC a 200 mg L-1; 8-HQC a 200 mg L-1 + sacarose a 50 g L-1. Foram feitas avaliações físicas: coloração, massa fresca e conteúdo relativo de água (CRA); avaliações químicas: açúcares redutores e pigmentos; e avaliações qualitativas: turgescência, cor das flores, e número de botões, flores entreabertas e abertas. A combinação de 8-HQC 200 mg L-1 + sacarose a 50 g L-1 foi a que apresentou melhor desempenho para a manutenção da qualidade das hastes florais, favorecendo a abertura de botões e a turgescência das lígulas. A sacarose contribuiu para uma melhor manutenção de substâncias de reserva na haste, que tiveram a sua vida de vaso estendida.

Armazenamento refrigerado de pomelos variedades flame e henderson revestidos com cera

Objetivou-se, neste trabalho, estudar a conservação de pomelos (Citrus paradisi Macfad.) varieties 'Flame' e 'Henderson' revestidos com cera Sparcitrus e mantidos sob refrigeração (8º C ± 1º C e 95% ± 5% UR). Para cada variedade estudada, utilizou-se delineamento inteiramente casualizado, disposto em esquema fatorial 2 x 5, com 3 repetições, onde o primeiro fator correspondeu aos tratamentos com e sem a aplicação de cera (controle) e o segundo, ao tempo armazenamento (0, 10, 20, 30 e 40 dias). Cada parcela experimental foi composta por cinco frutos. Foram estudadas as seguintes variáveis: perda de massa, rendimento do suco, pH, sólidos solúveis (SS), acidez titulável (AT), SS/AT, açúcares redutores, açúcares não redutores, açúcares solúveis totais, vitamina C e aparência externa. A aplicação de cera é efetiva na preservação da aparência de pomelos 'Flame' e 'Henderson', não afetando sua qualidade interna.

Perfil químico da parede celular e suas implicações na digestibilidade de Brachiaria brizantha e Brachiaria humidicola

No presente trabalho foram determinadas a composição química e a digestibilidade de diversas frações de Brachiaria brizantha e Brachiaria humidicola, após 70 dias de crescimento. O delineamento experimental foi inteiramente casualizado com cinco repetições para cada espécie. As plantas coletadas foram subdivididas nas frações apical, mediana e basal para as folhas e mediana e basilar para caules, de acordo com sua localização. Foram determinadas as concentrações de fibra em detergente neutro (FDN), proteína bruta (PB), lignina, ácido p_cumárico, ácido ferúlico e açúcares neutros (glicose, xilose e arabinose) e a digestibilidade in situ após 48 horas de período de incubação ruminal. As diferentes frações das espécies estudadas apresentam distinta composição química, cujos efeitos são observados na digestibilidade. A B. brizantha apresentou maiores concentrações de FDN no caule e PB nas folhas. Isto resultou em coeficientes de digestibilidade maiores em relação à B. humidicola. A diferença de digestibilidade entre caule e folhas e nas frações mais velhas pode estar relacionada ao tipo de condensação da lignina presente nos tecidos. Evidências na concentração e na proporção dos ácidos p_cumárico e ferúlico sugerem esta relação. A concentração de ácidos fenólicos esteve relacionada com a digestibilidade da matéria seca e a lignina com a digestibilidade da FDN. A análise dos ácidos fenólicos pode se constituir em importante ferramenta para avaliar o grau de condensação da lignina na parede celular dos diferentes tecidos das plantas forrageiras. A concentração de açúcares neutros não apresentou um padrão definido na composição dos diferentes tecidos. A arabinose foi o único açúcar que apresentou relações com a digestibilidade da matéria seca e com a concentração de ácidos fenólicos.

Phase diagram for freeze-dried persimmon

Phase transitions of freeze-dried persimmon in a large range of moisture content were determined by differential scanning calorimetry (DSC). In order to study this transitions at low and intermediate moisture content domains, samples were conditioned by adsorption at various water activities (a(w) = 0.11-0.90) at 25 degreesC. For the high moisture content region, samples were obtained by water addition. At a(w) less than or equal to 0.75 two glass transitions were visible, with T(g) decreasing with increasing water activity due to water plasticizing effect. The first T(g) is due to the matrix formed by sugars and water, the second one, less visible and less plasticized by water, is probably due to macromolecules of the fruit pulp. At a(w) between 0.80 and 0.90 a devitrification peak appeared after T(g) and before T(m). At this moisture content range, the Gordon-Taylor model represented satisfactorily the matrix glass transition curve. At the higher moisture content range (a(w) > 0.90), the more visible phenomenon was the ice melting. T(g) appeared less visible because the enthalpy change involved in glass transition is practically negligible in comparison with the latent heat of melting. In the high moisture content domain T(g) remained practically constant around T(g)' (-56.6 degreesC). (C) 2001 Elsevier B.V. B.V. All rights reserved.

Study of some Brazilian Myrtaceae in Jaboticabal sp

The family Myrtaceae is one of the most important related to fruit species. In Brazil it encloses more than 100 species of native fruit from North to South of the country (Giacometti, 1992; Donadio, 1992; Mattos, 1992). The genus Eugenia, Campomanesia, Psidium and Myrciaria are the most important, grouping most of the species of some importance. The germplasm bank of the Universidade Estadual Paulista includes some of the major species. Some characteristics are typical for most of the Myrtaceae fruit species. The most relevant are the long juvenile period presented by the trees, taking long time to produce, when propagated by seed; the slow growing tree behavior; difficult to propagated by vegetative means; large variability in trees obtained by seed propagation. The cited characteristics are commented for some species as well as the fruit quality, from data obtained in trees at the same ecological conditions.The species evaluated are: 1) Eugenia stipitata Mc Vaugh; 2) Eugenia tomentosa Cambes; 3) Eugenia brasiliensis Lam.; 4) Eugenia uniflora L.; 5) Eugenia luchsnathiana Berg.; 6) Eugenia uvalha Cambess; 7) Camponesia spp; 8) Plinia edulis (Veil. Sobral); 9) Eugenia involucrata D.C.; 10) Psidium acutangulum Mart.; 11) Myrciaria dubia Mc Vaugh; 12) Engenia guabiju Berg. The main conclusions based on the data analysed are: the fruits of some species present good general characteristics, mainly for fresh consumption, as high Vitamin C, sugars, pulp and other characteristics; 'Araca-boi' presents some good fruit characteristics, but is more adapted for processing, by its high acidity; Some species present low % of edible portion and need to be improved to gain commercial acceptance. mainly the 'cabeludinha' and 'cambuca'.

Production of fructooligosaccharides by the mycelia of Aspergillus japonicus immobilized in calcium alginate

This work describes fructose oligosaccharide (FOS) production by the immobilized mycelia (IM) of a strain of Aspergillus japonicus, isolated from soil. The microorganism was inoculated into 50 mi of medium composed of sugar cane molasses (5.0% of total sugars); yeast powder; 2.0%; K2HPO4, 0.5%; NaNO3, 0.2%; MgSO4. 7H(2)O, 0.05%; KCl, 0.05%, final pH 5.0, and the flasks were agitated in an orbital shaker at 200 rpm for 60 h, at 30 degrees C. The beta-fructofuranosidase activity (Uf), transfructosylating activity (Ut), hydrolyzing activity (Uh), and FOS production were analyzed by high performance liquid chromatography. FOS production was performed in a batch process in a 2-l jar fermenter by IM in calcium alginate beads. The optimum pH and temperature were 5.0-5.6 and 55 degrees C, respectively No loss of activity was observed when the mycelium was maintaned at 60 degrees C for 60 min. Maximum production was obtained using 5.75% (cellular weight/volume) of mycelia (122.4 Ut g(-1)) and 65% sucrose solution (w:v) for 4 h of reaction when the final product reached 61.28% of fetal FOS containing GF(2) (30.56%), GF(3) (26.45%), GF(4) (4.27%), sucrose (9.6%) and glucose (29.10%). In the assay conditions, 23 batches were performed without loss of activity of the IM, showing that the microorganism and the process utilized have potential for industrial applications. (C) 1998 Elsevier B.V. Ltd. All rights reserved.

Determination of pesticide residues in coconut water by liquid-liquid extraction and gas chromatography with electron-capture plus thermionic specific detection and solid-phase extraction and high-performance liquid chromatography with ultraviolet detection

Two simple methods were developed to determine, 11 pesticides in coconut water, a natural isotonic drink rich in salts, sugars and vitamins consumed by the people and athletes. The first procedure involves solid-phase extraction using Sep-Pak Vac C-18 disposable cartridges with methanol for elution. Isocratic analysis was carried out by means of high-performance liquid chromatography with ultraviolet detection at 254 nm to analyse captan, chlorothalonil, carbendazim, lufenuron and diafenthiuron. The other procedure is based on liquid-liquid extraction with hexane-dichloromethane (1:1, v/v), followed by gas chromatographic analysis with effluent splitting to electron-capture detection for determination of endosulfan, captan, tetradifon and trichlorfon and thermionic specific detection for determination of malathion, parathion-methyl and monocrotophos. The methods were validated with fortified samples at different concentration levels (0.01-12.0 mg/kg). Average recoveries ranged from 75 to 104% with relative standard deviations between 1.4 and 11.5%. Each recovery analysis was repeated at least five times. Limits of detection ranged from 0.002 to 2.0 mg/kg. The analytical procedures were applied to 15 samples and no detectable amounts of the pesticides were found in any samples under the conditions described. (C) 2002 Elsevier B.V. B.V. All rights reserved.

New crystal forms of Diocleinae lectins in the presence of different dimannosides

Studying the interactions between lectins and sugars is important in order to explain the differences observed in the biological activities presented by the highly similar proteins of the Diocleinae subtribe. Here, the crystallization and preliminary X--ray data of Canavalia gladiata lectin (CGL) and C. maritima lectin (CML) complexed with Man(alpha 1-2)Man(alpha 1)OMe, Man(alpha 1-3)Man(alpha 1)OMe and Man(alpha 1-4)Man(alpha 1)OMe in two crystal forms [the complexes with Man(alpha 1-3)Man(alpha 1)OMe and Man(alpha 1-4)Man(alpha 1)OMe crystallized in space group P3(2) and those with Man(alpha 1-2)Man(alpha 1)OMe crystallized in space group I222], which differed from those of the native proteins (P2(1)2(1)2 for CML and C222 for CGL), are reported. The crystal complexes of ConA-like lectins with Man(alpha 1-4)Man(alpha 1)OMe are reported here for the first time.

Sugarcane molasses and yeast powder used in the Fructooligosaccharides production by Aspergillus japonicus-FCL 119T and Aspergillus niger ATCC 20611

Different concentrations of sucrose (3-25% w/v) and peptone (2-5% w/v) were studied in the formulation of media during the cultivation of Aspergillus japonicus-FCL 119T and Aspergillus niger ATCC 20611. Moreover, cane molasses (3.5-17.5% w/v total sugar) and yeast powder (1.5-5% w/v) were used as alternative nutrients for both strains' cultivation. These media were formulated for analysis of cellular growth, P-Fructosyltransferase and Fructooligosaccharides (FOS) production. Transfructosylating activity (U-t) and FOS production were analyzed by HPLC. The highest enzyme production by both the strains was 3% (w/v) sucrose and 3% (w/v) peptone, or 3.5% (w/v) total sugars present in cane molasses and 1.5% (w/v) yeast powder. Cane molasses and yeast powder were as good as sucrose and peptone in the enzyme and FOS (around 60% w/w) production by studied strains.

Glass transitions for freeze-dried and air-dried tomato

Glass transition temperatures of freeze-dried tomato conditioned at various water activities at 25 C were determined by differential scanning calorimetry (DSC). Air-dried tomato with and without osmotic pre-treatment in sucrose/NaCl solutions was also analyzed. Thermograms corresponding to the low water activity domain (0.11 less than or equal to a(w) less than or equal to 0.75) revealed the existence of two glass transitions, which were attributed to separated phases formed by sugars and water and other natural macromolecules present in the vegetable. Both transitions were plasticized by water and experimental data could be well correlated by the Gordon-Taylor equation in the low-temperature domain, and by the Kwei model in the high-temperature domain. For higher water activities, the low-temperature glass transition curve exhibited a discontinuity, with suddenly increased glass transition temperatures approaching a constant value that corresponds to the T-g of the maximally freeze-concentrated amorphous matrix. The unfreezable water content was determined through the melting enthalpy dependence on the moisture content. (C) 2002 Elsevier B.V. Ltd. All rights reserved.

Structural analysis of Canavalia maritima and Canavalia gladiata lectins complexed with different dimannosides: New insights into the understanding of the structure-biological activity relationship in legume lectins

Plant lectins, especially those purified from species of the Legummosae family, represent the best studied group of carbohydrate-binding proteins. The legume lectins from Diocleinae subtribe are highly similar proteins that present significant differences in the potency/ efficacy of their biological activities. The structural studies of the interactions between lectins and sugars may clarify the origin of the distinct biological activities observed in this high similar class of proteins. In this way, this work presents a crystallographic study of the ConM and CGL (agglutinins from Canavalia maritima and Canavalia gladiata, respectively) in the following complexes: ConM/ CGL:Man(alpha 1-2)Man(alpha 1-0)Me, ConM/CGL:Man(alpha 1-O)Man(alpha 1-O)Me and ConM/CGL:Man(alpha 1-4)Man(alpha 1-O)Me, which crystallized in different conditions and space group from the native proteins.The structures were solved by molecular replacement, presenting satisfactory values for R-factor and R-factor. Comparisons between ConM, CGL and ConA (Canavalia ensiformis lectin) binding mode with the dimannosides in subject, presented different interactions patterns, which may account for a structural explanation of the distincts biological properties observed in the lectins of Diocleinae subtribe. (C) 2007 Elsevier B.V. All rights reserved.

Difference variance dispersion graphs for comparing response surface designs with applications in food technology

Variance dispersion graphs have become a popular tool in aiding the choice of a response surface design. Often differences in response from some particular point, such as the expected position of the optimum or standard operating conditions, are more important than the response itself. We describe two examples from food technology. In the first, an experiment was conducted to find the levels of three factors which optimized the yield of valuable products enzymatically synthesized from sugars and to discover how the yield changed as the levels of the factors were changed from the optimum. In the second example, an experiment was conducted on a mixing process for pastry dough to discover how three factors affected a number of properties of the pastry, with a view to using these factors to control the process. We introduce the difference variance dispersion graph (DVDG) to help in the choice of a design in these circumstances. The DVDG for blocked designs is developed and the examples are used to show how the DVDG can be used in practice. In both examples a design was chosen by using the DVDG, as well as other properties, and the experiments were conducted and produced results that were useful to the experimenters. In both cases the conclusions were drawn partly by comparing responses at different points on the response surface.

Production of volatile compounds by Geotrichum fragrans using cassava wastewater as substrate

The cassava processing industry generates wastewater named manipueira with a high organic content. Although considered a pollutant, manipueira can be used as substrate for fermentative processes including the cultivation of Geotrichum fragrans. This aerobic microorganism isolated from cassava wastewater has cyanide resistant respiration. Under cassava wastewater cultivation, G. fragrans produced fruit aroma volatile compounds. This study evaluated volatile compounds produced by G. fragrans in cassava liquid waste. The waste had a sugar composition composed of dextrin (2.6%), maltose (1.4%), sucrose (32.1%), glucose (38.3%), and fructose (25.6%). The average value of total sugars was 58.2 g l(-1), composed of 38.0 g l(-1) reducing and 20.2 g l(-1) non-reducing sugars. The chemical oxygen demand (COD) average value was 60 000 mg l(-1). G. fragrans used sugars (fructose and glucose) for energy generation reducing the COD value of the cassava wastewater by 40%. Biomass production of G. fragrans cultivated for 12 h in natural cassava liquid waste was 12.8 g l(-)1. The volatile compounds identified in the cassava liquid waste after 72 h cultivation were: 1-butanol, 3-methyl 1-butanol (isoamylic alcohol), 2-methyl 1-butanol, 1-3 butanodiol and phenylethanol; ethyl acetate, ethyl propionate, 2-methyl ethyl propionate and 2-methyl propanoic. The effect of substrate supplementation with glucose (50 g l(-1)), fructose (50 g l(-1)) and aqueous yeast extract (200 ml l(-1)) did not affect the qualitative and quantitative profiles of volatile compounds. These results indicate that the carbon (C) source utilized by microorganism was glucose or fructose, while nitrogen (N) supplementation was not necessary because the agent did not exhaust all the nitrogen of the wastewater. (C) 2003 Elsevier B.V. Ltd. All rights reserved.

Concentration profiles and effective diffusion coefficients of sucrose and water in osmo-dehydrated apples

The spatial distribution of water and sugars in half-fresh apples dehydrated in sucrose solutions (30% and 50% w/w, 27 degrees C) for 2, 4 and 8 h, was determined. Each half was sliced as from the exposed surface. The density, water and sugar contents were determined for each piece. A mathematical model was fitted to the experimental data of the water and sucrose contents considering the overall flux and tissue shrinkage. A numerical method of finite differences permitted the calculation of the effective diffusion coefficients as a function of concentration, using material coordinates and integrating the two differential equations (for water and sucrose) simultaneously. The coefficients obtained were one or even two orders of magnitude lower than those for pure solutions and presented unusual concentration dependence. The behaviour of the apple tissue was also studied using light microscopy techniques to obtain images of the osmotically treated pieces (20%, 30% and 50% w/w sucrose solutions for 2, 4 and 8 h). (c) 2006 Elsevier Ltd. All rights reserved.