Identification and estimation of equivalent area parameters using synchronised phasor measurements

A new approach is proposed for obtaining a non-linear area-based equivalent model of power systems to express the inter-area oscillations using synchronised phasor measurements. The generators that remain coherent for inter-area disturbances over a wide range of operating conditions define the areas, and the reduced model is obtained by representing each area by an equivalent machine. The parameters of the reduced system are identified by processing the obtained measurements, and a non-linear Kalman estimator is then designed for the estimation of equivalent area angles and frequencies. The simulation of the approach on a two-area system shows substantial reduction of non-inter-area modes in the estimated angles. The proposed methods are also applied to a ten-machine system to illustrate the feasibility of the approach on larger and meshed networks.

Exploring pedestrian accessibility and walkability : insight from public place observations in inner-urban higher density Brisbane, Australia

As planners work to create more sustainable and liveable urban environments, a priority is to transition away from prioritising the automobile and towards enhancing the pedestrian experience. Thus, this research explores the experience of pedestrian accessibility in inner-urban higher-density Brisbane in Australia, drawing on findings from semi-structured in-depth interviews with 24 residents and over 100 hours of public place observations in three case-study neighbourhoods. The interviews took place in residents homes and explored their experience of higher density living and their neighbourhood, whilst observations were recorded through a combination of methods including photographs, sketch maps, recordings and field journals. Observation locations included retail and commercial space, roads, parkland and open space, with multiple observations at each location. A thematic analysis identified common themes in both interviews and the observations, with this paper focusing on residents’ lived experience in urban built environments. This analysis revealed that pedestrian accessibility is linked to access to local amenities and direct routes, aesthetics, sense of community, ownership of space and safety. In particular, observations revealed how pedestrian accessibility and route-taking works with, against or in spite of the design features of urban environments, as well as the importance of the social use of the built environment. Residents spoke about although walking quick and preferred for local amenities, the decision to walk was moderated by factors such as time of day and perceived safety. Measures to ensure and improve the pedestrian accessibility of urban areas needs to take into account the propensity for people to prefer and improvise direct routes (often to the detriment of traffic safety considerations), the importance of ongoing maintenance and upgrading of walking infrastructure and the importance of aesthetically pleasing and safe walking environments. By combining interviews and observations, this research highlights the current dominance of the automobile culture in Brisbane and the layers of meaning, experiences and complexity hidden within the pedestrian experience.

Effectiveness of reactive power capability of photo voltaic inverters to maintain acceptable voltage profile in a residential distribution system

Integration of rooftop PVs and increasing peak demand in the residential distribution networks has resulted in unacceptable voltage profile. Curtailing PV generation to alleviate overvoltage problem and making regular network investment to cater peak demand is not always feasible. Reactive capability of the PV inverter can be a solution to address voltage dip and over voltage problems to some extent. This paper proposes an algorithm to utilize reactive capability of PV inverters and investigate their effectiveness on feeder length and R/X ratio of the line. Feeder loading level for a particular R/X ratio to have acceptable voltage profile is also investigated. Furthermore, the need of appropriate feeder distances and R/X ratio for acceptable voltage profile, which can be useful for suburban design and distribution planning, is explored.

Quantitative fit analysis of orthopedic bone plates : methods, criteria and approach

Studies on quantitative fit analysis of precontoured fracture fixation plates emerged within the last few years and therefore, there is a wide research gap in this area. Quantitative fit assessment facilitates the measure of the gap between a fracture fixation plate and the underlying bone, and specifies the required plate fit criteria. For clinically meaningful fit assessment outcome, it is necessary to establish the appropriate criteria and parameter. The present paper studies this subject and recommends using multiple fit criteria and the maximum distance between the plate and underlying bone as fit parameter for clinically relevant outcome. We also propose the development of a software tool for automatic plate positioning and fit assessment for the purpose of implant design validation and optimization in an effort to provide better fitting implant that can assist proper fracture healing. The fundamental specifications of the software are discussed.

An algebraic approach for determination of DG parameters to support voltage profiles in radial distribution networks

Rapidly increasing electricity demands and capacity shortage of transmission and distribution facilities are the main driving forces for the growth of Distributed Generation (DG) integration in power grids. One of the reasons for choosing a DG is its ability to support voltage in a distribution system. Selection of effective DG characteristics and DG parameters is a significant concern of distribution system planners to obtain maximum potential benefits from the DG unit. This paper addresses the issue of improving the network voltage profile in distribution systems by installing a DG of the most suitable size, at a suitable location. An analytical approach is developed based on algebraic equations for uniformly distributed loads to determine the optimal operation, size and location of the DG in order to achieve required levels of network voltage. The developed method is simple to use for conceptual design and analysis of distribution system expansion with a DG and suitable for a quick estimation of DG parameters (such as optimal operating angle, size and location of a DG system) in a radial network. A practical network is used to verify the proposed technique and test results are presented.

Soluble laminin and arginine-glycine-aspartic acid containing peptides differentially regulate type IV collagenase messenger RNA, activation, and localization in testicular cell culture

Rat testicular cells in culture produce several metalloproteinases including type IV collagenases (Sang et al. Biol Reprod 1990; 43:946-955, 956-964). We have now investigated the regulation of testicular cell type IV collagenase and other metalloprotemases in vitro. Soluble laminin stimulated Sertoli cell type IV collagenase mRNA levels. However, three peptides corresponding to different domains of the laminin molecule (CSRAKQAASIKVASADR, FALRGDNP, CLQDGDVRV) did not influence type IV collagenase mENA levels. Zyniographic analysis of medium collected from these cultures revealed that neither soluble laminin nor any of the peptides influenced 72-Wa type IV collagenase protein levels. However, peptide FALRGDNP resulted in both, a selective increase in two higher molecular-weight metalloprotemnases (83 kDa and 110 Wa and in an activation of the 72-Wa rat type IV collagenase. Interleukin-1, phorbol ester, testosterone, and FSH did not affect collagenase activation, lmmunocytochemical studies demonstrated that the addition of soluble laminin resulted in a redistribution of type IV collagenase from intracellular vesicles to the cell-substrate region beneath the cells. Peptide FALRGDNP induced a change from a vesicular to peripheral plasma membrane type of staining pattern. Zymography of plasma membrane preparations demonstrated triton-soluble gelatinases of 76 Wa, 83 Wa, and 110 Wa and a triton-insoluble gelatinase of 225 Wa, These results indicate that testicular cell type IV collagenase mRNA levels, enzyme activation, and distribution are influenced by laminin and RGD-containing peptides.

Urban food futures : ICTs and opportunities

Food is a vital foundation of all human life. It is essential to a myriad of political, socio-cultural, economic and environmental practices throughout history. As Kaplan [1] contends, “the scholarship on food has real pedigree.” Today, practices of food production, consumption and distribution have the potential to go through immensely transformative shifts as network technologies become increasingly embedded in every domain of contemporary life. This presents unique opportunities for further scholarly exploration on this topic, which this special issue intends to address. Information and communication technologies (ICTs) are one of the pillars of contemporary global functionality and sustenance and undoubtedly will continue to present new challenges and opportunities for the future. As such, this special issue of Futures has been brought together to address challenges and opportunities at the intersection of food and ICTs. In particular, the edition asks, what are the key roles that network technologies play in re-shaping social and economic networks of food?

Identification of optimal epitopes for Plasmodium falciparum rapid diagnostic tests that target histidine-rich proteins 2 and 3

Rapid diagnostic tests (RDTs) represent important tools to diagnose malaria infection. To improve understanding of the variable performance of RDTs that detect the major target in Plasmodium falciparum, namely, histidine-rich protein 2 (HRP2), and to inform the design of better tests, we undertook detailed mapping of the epitopes recognized by eight HRP-specific monoclonal antibodies (MAbs). To investigate the geographic skewing of this polymorphic protein, we analyzed the distribution of these epitopes in parasites from geographically diverse areas. To identify an ideal amino acid motif for a MAb to target in HRP2 and in the related protein HRP3, we used a purpose-designed script to perform bioinformatic analysis of 448 distinct gene sequences from pfhrp2 and from 99 sequences from the closely related gene pfhrp3. The frequency and distribution of these motifs were also compared to the MAb epitopes. Heat stability testing of MAbs immobilized on nitrocellulose membranes was also performed. Results of these experiments enabled the identification of MAbs with the most desirable characteristics for inclusion in RDTs, including copy number and coverage of target epitopes, geographic skewing, heat stability, and match with the most abundant amino acid motifs identified. This study therefore informs the selection of MAbs to include in malaria RDTs as well as in the generation of improved MAbs that should improve the performance of HRP-detecting malaria RDTs.

Varenicline decreases ethanol intake and increases dopamine release via neuronal nicotinic acetylcholine receptors in the nucleus accumbens

BACKGROUND AND PURPOSE Varenicline, a neuronal nicotinic acetylcholine receptor (nAChR) modulator, decreases ethanol consumption in rodents and humans. The proposed mechanism of action for varenicline to reduce ethanol consumption has been through modulation of dopamine (DA) release in the nucleus accumbens (NAc) via α4*-containing nAChRs in the ventral tegmental area (VTA). However, presynaptic nAChRs on dopaminergic terminals in the NAc have been shown to directly modulate dopaminergic signalling independently of neuronal activity from the VTA. In this study, we determined whether nAChRs in the NAc play a role in varenicline’s effects on ethanol consumption. EXPERIMENTAL APPROACH Rats were trained to consume ethanol using the intermittent-access two-bottle choice protocol for 10 weeks. Ethanol intake was measured after varenicline or vehicle was microinfused into the NAc (core, shell or core-shell border) or the VTA (anterior or posterior). The effect of varenicline treatment on DA release in the NAc was measured using both in vivo microdialysis and in vitro fast-scan cyclic voltammetry (FSCV). KEY RESULTS Microinfusion of varenicline into the NAc core and core-shell border, but not into the NAc shell or VTA, reduced ethanol intake following long-term ethanol consumption. During microdialysis, a significant enhancement in accumbal DA release occurred following systemic administration of varenicline and FSCV showed that varenicline also altered the evoked release of DA in the NAc. CONCLUSION AND IMPLICATIONS Following long-term ethanol consumption, varenicline in the NAc reduces ethanol intake, suggesting that presynaptic nAChRs in the NAc are important for mediating varenicline’s effects on ethanol consumption.

The establishment of an ISO compliant cancer biobank for Jordan and its neighboring countries through knowledge transfer and training

Research studies aimed at advancing cancer prevention, diagnosis, and treatment depend on a number of key resources, including a ready supply of high-quality annotated biospecimens from diverse ethnic populations that can be used to test new drugs, assess the validity of prognostic biomarkers, and develop tailor-made therapies. In November 2011, KHCCBIO was established at the King Hussein Cancer Center (KHCC) with the support of Seventh Framework Programme (FP7) funding from the European Union (khccbio.khcc.jo). KHCCBIO was developed for the purpose of achieving an ISO accredited cancer biobank through the collection, processing, and preservation of high-quality, clinically annotated biospecimens from consenting cancer patients, making it the first cancer biobank of its kind in Jordan. The establishment of a state-of-the-art, standardized biospecimen repository of matched normal and lung tumor tissue, in addition to blood components such as serum, plasma, and white blood cells, was achieved through the support and experience of its European partners, Trinity College Dublin, Biostor Ireland, and accelopment AG. To date, KHCCBIO along with its partners, have worked closely in establishing an ISO Quality Management System (QMS) under which the biobank will operate. A Quality Policy Manual, Validation, and Training plan have been developed in addition to the development of standard operating procedures (SOPs) for consenting policies on ethical issues, data privacy, confidentiality, and biobanking bylaws. SOPs have also been drafted according to best international practices and implemented for the donation, procurement, processing, testing, preservation, storage, and distribution of tissues and blood samples from lung cancer patients, which will form the basis for the procurement of other cancer types. KHCCBIO will be the first ISO accredited cancer biobank from a diverse ethnic Middle Eastern and North African population. It will provide a unique and valuable resource of high-quality human biospecimens and anonymized clinicopathological data to the cancer research communities world-wide.

Easy data, hard data : the politics and pragmatics of Twitter research after the computational turn

In this chapter, we draw out the relevant themes from a range of critical scholarship from the small body of digital media and software studies work that has focused on the politics of Twitter data and the sociotechnical means by which access is regulated. We highlight in particular the contested relationships between social media research (in both academic and non-academic contexts) and the data wholesale, retail, and analytics industries that feed on them. In the second major section of the chapter we discuss in detail the pragmatic edge of these politics in terms of what kinds of scientific research is and is not possible in the current political economy of Twitter data access. Finally, at the end of the chapter we return to the much broader implications of these issues for the politics of knowledge, demonstrating how the apparently microscopic level of how the Twitter API mediates access to Twitter data actually inscribes and influences the macro level of the global political economy of science itself, through re-inscribing institutional and traditional disciplinary privilege We conclude with some speculations about future developments in data rights and data philanthropy that may at least mitigate some of these negative impacts.

Improved fabrication of melt electrospun tissue engineering scaffolds using direct writing and advanced electric field control

Direct writing melt electrospinning is an additive manufacturing technique capable of the layer-by-layer fabrication of highly ordered 3d tissue engineering scaffolds from micron-diameter fibres. The utility of these scaffolds, however, is limited by the maximum achievable height of controlled fibre deposition, beyond which the structure becomes increasingly disordered. A source of this disorder is charge build-up on the deposited polymer producing unwanted coulombic forces. In this study we introduce a novel melt electrospinning platform with dual voltage power supplies to reduce undesirable charge effects and improve fibre deposition control. We produced and characterised several 90° cross-hatched fibre scaffolds using a range of needle/collector plate voltages. Fibre thickness was found to be sensitive only to overall potential and invariant to specific tip/collector voltage. We also produced ordered scaffolds up to 200 layers thick (fibre spacing 1 mm, diameter 40 μm) and characterised structure in terms of three distinct zones; ordered, semi-ordered and disordered. Our in vitro analysis indicates successful cell attachment and distribution throughout the scaffolds, with little evidence of cell death after seven days. This study demonstrates the importance of electrostatic control for reducing destabilising polymer charge effects and enabling the fabrication of morphologically suitable scaffolds for tissue engineering.

Mapping geographical knowledge and skills needed for pre-service teachers in teacher education

In Australia, for more than two decades, a ‘social science’ integrated framework was the favoured approach for delivering subjects such as history and geography. However, such interdisciplinary approaches have continued to attract criticism from various parts of the academic and public spheres and since 2009, a return to teaching the disciplines has been heralded as the ‘new’ way forward. Using discourse analysis techniques associated with Foucauldian archaeology, the purpose of this paper is to examine the Australian Curriculum: Geography document to ascertain the discourses necessary for pre-service teachers to enact effective teaching of geography in a primary setting. Then, based on pre-service teachers’ online survey responses, the paper investigates if such future teachers have the knowledge and skills to interpret, deliver and enact the new geography curriculum in primary classrooms. Finally, as teacher educators, our interest lies in preparing pre-service teachers effectively for the classroom so the findings are used to inform the content of a teacher education course for pre-service primary teachers.

The geography of the UK’s creative and high–tech economies

This report is the first systematic analysis of employment in the UK’s creative and high-tech economies. It analyses their size, growth and distribution across the country. Key Findings • The UK’s creative economy had 2.6 million jobs in 2013, consisting of 1.7 million jobs in the creative industries (890,000 in creative occupations and 818,000 working in other roles) and 907,000 jobs in creative occupations outside of the creative industries. • The UK’s high–tech economy had 3.2 million jobs in 2013, 2.4 million of which were jobs in high–tech industries (825,000 in Science Technology Engineering and Mathematics (STEM) occupations and 1.6 million in other roles) and 806,000 jobs in STEM occupations outside of the high–tech industries. • Employment in the creative economy grew on average over three times faster than the workforce as a whole (4.3 per cent per annum (p.a.) vs 1.2 per cent p.a.) between 2011 and 2013. • Employment in the high–tech economy also grew faster than the workforce over this period (2.1 per cent p.a. vs 1.2 per cent p.a.). • The creative economy is particularly concentrated in London and the South East which together account for 43 per cent of the UK’s creative economy workforce. By contrast, 31 per cent of high-tech economy employment and 28 per cent of the UK’s workforce is located in this area.

Testing times for the implementation of curriculum change: Analysis and extension of a curriculum change model

School curriculum change processes have traditionally been managed internally. However, in Queensland, Australia, as a response to the current high-stakes accountability regime, more and more principals are outsourcing this work to external change agents (ECAs). In 2009, one of the authors (a university lecturer and ECA) developed a curriculum change model (the Controlled Rapid Approach to Curriculum Change (CRACC)), specifically outlining the involvement of an ECA in the initiation phase of a school’s curriculum change process. The purpose of this paper is to extend the CRACC model by unpacking the implementation phase, drawing on data from a pilot study of a single school. Interview responses revealed that during the implementation phase, teachers wanted to be kept informed of the wider educational context; use data to constantly track students; relate pedagogical practices to testing practices; share information between departments and professional levels; and, own whole school performance. It is suggested that the findings would be transferable to other school settings and internal leadership of curriculum change. The paper also strikes a chord of concern – Do the responses from teachers operating in such an accountability regime live their professional lives within this corporate and globalised ideology whether they want to or not?