The ecology of paper mill by-product and its evaluation as a casing medium in the culture of Agaricus bisporus (Lange) Pilat

Effluent from pulp and paper production at the Kemsley mill of Bowaters U.K. Paper Company Limited passes through two treatment stages before its discharge into the Swale estuary. Suspended material removed during treatment is deposited on wasteground as a thin sludge. The solids it contains are mainly wood components lost during pulp production, whilst it also has a high salt content, derived from chemicals used in pulping processes. After deposition the sludge undergoes an ageing process during which it dries out and its salt content is reduced. This ageing can be reproduced and accelerated by improved drainage under controlled conditions. The paper mill sludge was investigated as a casing medium in the culture of Agaricus bisporus (Lange) Pilat, the cultivated mushroom. It was unsuitable up to one year from deposition due largely to the inhibitory effect of its salt content on fruiting. Material eighteen months or more in age gave yields comparable to standard peat casing. Before use as a casing the material must be shredded to a satisfactory structure, neutralised with chalk, and pasteurised to eliminate organisms harmful to the crop. The prepared medium has a high water holding capacity and a structure resilient to management procedures, important requirements of a good casing. A passive movement of salts from the compost to the casing was shown to occur during culture, capable of enhancing the natural decline in cropping if sufficiently great. The ions chloride, potassium, sodium and sulphate were shown to be responsible, their damaging effects being due to high conductivity created in the casing. Studies of elements available during culture suggested phosphate availability in the compost could limit crop potential, whilst iron released by mycelium of A.bisporus in the casing may be utilised by associated micro-organisms.

The performance of stabilized and unstabilized minestone in an aqueous environment with emphasis on its erosion resistance

Britain's sea and flood defences are becoming increasingly aged and as a consequence, more fragile and vulnerable. As the government's philosophy on resources shifts against the use of prime quarried and dredged geo-materials, the need to find alternative bulk materials to bolster Britain's prone defences becomes more pressing. One conceivable source for such a material is colliery waste or minestone. Although a plethora of erosion-abrasion studies have been carried out on soils and soil-cements, very little research has been undertaken to determine the resistance of minestone and its cement stabilized form to the effects of water erosion. The thesis reviews the current extent to which soil-cements, minestone and cement stabilized minestone (CSM) have been employed for hydraulic construction projects. A synopsis is also given on the effects of immersion on shales, mudstones and minestone, especially with regard to the phenomena of slaking. A laboratory study was undertaken featuring a selection of minestones from several British coalfields. The stability of minestone and CSM in sea water and distilled water was assessed using slaking tests and immersion monitoring and the bearing on the use of these materials for hydraulic construction is discussed. Following a review of current erosion apparatus, the erosion/abrasion test and rotating cylinder device were chosen and employed to assess the erosion resistance of minestone and CSM. Comparison was made with a sand mix designed to represent a dredged sand, the more traditional, bulk hydraulic construction material. The results of the erosion study suggest that both minestone and CSM were more resistant to erosion and abrasion than equivalently treated sand mixes. The greater resistance of minestone to the agents of erosion and abrasion is attributed to several factors including the size of the particles, a greater degree of cement bonding and the ability of the minestone aggregate to absorb, rather than transmit shock waves produced by impacting abrasive particles. Although minestone is shown to be highly unstable when subjected to cyclic changes in its moisture content, the study suggests that even in an intertidal regime where cyclic immersion does takes place, minestone will retain sufficient moisture within its fabric to prevent slaking from taking place. The slaking study reveals a close relationship between slaking susceptibility and total pore surface area as revealed by porosimetry. The immersion study shows that although the fabric of CSM is rapidly attacked in sea water, a high degree of the disruption is associated with the edges and corners of samples (ie. free surface) while the integrity of the internal fabric remains relatively intact. CSM samples were shown to be resilient when subjected to immersion in distilled water. An overall assessment of minestone and CSM would suggest that with the implementation of judicious selection and appropriate quality control they could be used as alternative materials for flood and sea defences. It is believed, that even in the harsh regime of a marine environment, CSM could be employed for temporary and sacrificial schemes.

The stabilisation of purified, reconstituted P-glycoprotein by freeze drying with disaccharides

The drug efflux pump P-glycoprotein (P-gp) (ABCB1) confers multidrug resistance, a major cause of failure in the chemotherapy of tumours, exacerbated by a shortage of potent and selective inhibitors. A high throughput assay using purified P-gp to screen and characterise potential inhibitors would greatly accelerate their development. However, long-term stability of purified reconstituted ABCB1 can only be reliably achieved with storage at -80 °C. For example, at 20 °C, the activity of ABCB1 was abrogated with a half-life of <1 day. The aim of this investigation was to stabilise purified, reconstituted ABCB1 to enable storage at higher temperatures and thereby enable design of a high throughput assay system. The ABCB1 purification procedure was optimised to allow successful freeze drying by substitution of glycerol with the disaccharides trehalose or maltose. Addition of disaccharides resulted in ATPase activity being retained immediately following lyophilisation with no significant difference between the two disaccharides. However, during storage trehalose preserved ATPase activity for several months regardless of the temperature (e.g. 60% retention at 150 days), whereas ATPase activity in maltose purified P-gp was affected by both storage time and temperature. The data provide an effective mechanism for the production of resilient purified, reconstituted ABCB1.

State-of-the-art of ‘Lean’ in the aviation maintenance, repair, and overhaul industry

The increasing need for maintenance, repair, and overhaul (MRO) organizations to meet customers' demands in quality and reduced lead times is key to its survival within the aviation industry. Furthermore, with the unpredictability in the global market and difficulties with forecasting characteristic of the MRO industry there is an increased need for the reevaluation of the operation models of organizations within this sector. However, severe economic turmoil and ever-increasing global competition introduce the opportunity for the adoption of a resilient, tried, and tested business operation model such as 'Lean'. In order to understand this concept, its long-term viability, and its application within the aerospace MRO sector fully, this paper presents the state-of-the-art in terms of the adoption of Lean within the MRO industry by carrying out a systematic review of the literature. This paper establishes the common perception of Lean by the MRO industry and the measurable progress that has been made on the subject. Some issues and challenges are also highlighted including the misconceptions that arise from the direct transference of the perception of Lean from other industrial sectors into the aerospace MRO industry. The 'enablers and inhibitors' of Lean within the aviation industry are also discussed. This paper exposes the scarcity of the literature and the general lagging behind of the industry to the adoption of the Lean paradigm and thus highlights areas where further research is required. © 2011 Authors.

Call admission control algorithms in OFDM-based wireless multiservice networks

Orthogonal frequency division multiplexing (OFDM) is becoming a fundamental technology in future generation wireless communications. Call admission control is an effective mechanism to guarantee resilient, efficient, and quality-of-service (QoS) services in wireless mobile networks. In this paper, we present several call admission control algorithms for OFDM-based wireless multiservice networks. Call connection requests are differentiated into narrow-band calls and wide-band calls. For either class of calls, the traffic process is characterized as batch arrival since each call may request multiple subcarriers to satisfy its QoS requirement. The batch size is a random variable following a probability mass function (PMF) with realistically maximum value. In addition, the service times for wide-band and narrow-band calls are different. Following this, we perform a tele-traffic queueing analysis for OFDM-based wireless multiservice networks. The formulae for the significant performance metrics call blocking probability and bandwidth utilization are developed. Numerical investigations are presented to demonstrate the interaction between key parameters and performance metrics. The performance tradeoff among different call admission control algorithms is discussed. Moreover, the analytical model has been validated by simulation. The methodology as well as the result provides an efficient tool for planning next-generation OFDM-based broadband wireless access systems.

The paradox of social resilience:how cognitive strategies and coping mechanisms attenuate and accentuate resilience

This paper examines two concepts, social vulnerability and social resilience, often used to describe people and their relationship to a disaster. Social vulnerability is the exposure to harm resulting from demographic and socioeconomic factors that heighten the exposure to disaster. Social resilience is the ability to avoid disaster, cope with change and recover from disaster. Vulnerability to a space and social resilience through society is explored through a focus on the elderly, a group sometimes regarded as having low resilience while being particularly vulnerable. Our findings explore the degree to which an elderly group exposed to coastal flood risk exhibits social resilience through both cognitive strategies, such as risk perception and self-perception, as well as through coping mechanisms, such as accepting change and self-organisation. These attenuate and accentuate the resilience of individuals through their own preparations as well as their communities' preparations and also contribute to the delusion of resilience which leads individuals to act as if they are more resilient than they are in reality, which we call negative resilience. Thus, we draw attention to three main areas: the degree to which social vulnerability can disguise its social resilience; the role played by cognitive strategies and coping mechanisms on an individual's social resilience; and the high risk aspects of social resilience. © 2014 Elsevier Ltd. All rights reserved.

Learning to collaborate:a study of individual and organizational learning, and interorganizational relationships

This paper examines learning to collaborate in the context of industrial supply relationships. Evidence of collaboration, and individual and organizational learning, from an in-depth case study of a large organization and its relations with two key suppliers is discussed. Analytic methods developed to elicit such evidence and provide insights into learning processes and outcomes are presented. It is argued that it is possible for an organization and individuals to learn to develop resilient collaborative relationships, but this requires a more thorough consideration and understanding of issues such as trust, commitment and teamwork than has been typical to date. Suggestions for future practice and research are presented.

Reinstatement of flood affected properties:experiences of SMEs affected by the 2009 Cockermouth flood event

Recent policy changes in the UK encourage at-risk communities to learn to live with and adapt to flooding. Adaptation of individual properties by embracing resilient and resistant measures is an important aspect endorsed therein. Uptake of such protection measures by property owners, including that of Small and Medium-sized Enterprises (SMEs), has traditionally been low. A post-flood situation offers an opportunity to reinstate / reconstruct by integrating flood protection measures, in such a way that reduce damage and enhance the ability to recover in the event of a future flood incidence. In order to investigate the reinstatement / reconstruction experiences of flood affected SMEs, those affected by the 2009 Cockermouth flood event were studied. The results of a questionnaire survey revealed that many SMEs have opted for traditional reinstatement rather than resilient reinstatement. A detailed case study revealed requirements of getting the business back and running as soon as possible, a lack of guidance and advice from professionals and financial concerns as some of the barriers faced by SMEs. It is important that SMEs are provided with necessary guidance during the post-flood reinstatement stage, in order to make sure that the opportunity to build back better, integrating flood-protection measures is grasped by the SME owners. Stakeholders related to the construction industry, who are actively involved with post-flood reinstatement work, have an important role to play in this regard, providing necessary guidance and expertise to flooded SMEs.

Excipient characterization and particle engineering to develop directly compressed orally disintegrating tablets

ODTs have emerged as a novel oral dosage form with a potential to deliver a wide range of drug candidates to paediatric and geriatric patients. Compression of excipients offers a costeffective and translatable methodology for the manufacture of ODTs. Though, technical challenges prevail such as difficulty to achieve suitable tablet mechanical strength while ensuring rapid disintegration in the mouth, poor compressibility of preferred ODT diluent Dmannitol, and limited use for modified drug-release. The work investigates excipients’ functionality in ODTs and proposes new methodologies for enhancing material characteristics via process and particle engineering. It also aims to expand ODT applications for modified drug-release. Preformulation and formulation studies employed a plethora of techniques/tests including AFM, SEM, DSC, XRD, TGA, HSM, FTIR, hardness, disintegration time, friability, stress/strain and Heckel analysis. Tableting of D-mannitol and cellulosic excipients utilised various compression forces, material concentrations and grades. Engineered D-mannitol particles were made by spray drying mannitol with pore former NH4HCO3. Coated microparticles of model API omeprazole were prepared using water-based film forming polymers. The results of nanoscopic investigations elucidated the compression profiles of ODT excipients. Strong densification of MCC (Py is 625 MPa) occurs due to conglomeration of physicomechanical factors whereas D-mannitol fragments under pressure leading to poor compacts. Addition of cellulosic excipients (L-HPC and HPMC) and granular mannitol to powder mannitol was required to mechanically strengthen the dosage form (hardness >60 N, friability <1%) and to maintain rapid disintegration (<30 sec). Similarly, functionality was integrated into D-mannitol by fabrication of porous, yet, resilient particles which resulted in upto 150% increase in the hardness of compacts. The formulated particles provided resistance to fracture under pressure due to inherent elasticity while promoted tablet disintegration (50-77% reduction in disintegration time) due to porous nature. Additionally, coated microparticles provided an ODT-appropriate modified-release coating strategy by preventing drug (omeprazole) release.

Modelling sustainability performance to achieve absolute reductions in socio-ecological systems

As the world’s natural resources dwindle and critical levels of environmental pollution are approached, sustainability becomes a key issue for governments, organisations and individuals. With the consequences of such an issue in mind, this paper introduces a unifying approach to measure the sustainability performance of socio-economic systems based on the interplay between two key variables: essentiality of consumption and environmental impact. This measure attributes to every system a ‘fitness’ value i.e. a quantity that reflects its ability to remain resilient/healthy by avoiding ecological, social and economic collapse as it consumes the available resources. This new measure is tested on a system where there is a limited supply of resources and four basic consumption types. The analysis has theoretical implications as well as practical importance as it can help countries, organisations or even individuals, in finding better ways to measure sustainability performance.

A conceptual framework for understanding resilience of construction SMEs to extreme weather events

Purpose Small and Medium-sized Enterprises (SMEs), which form a significant portion in many economies, are some of the most vulnerable to the impact of Extreme Weather Events (EWEs). This is of particular importance to the construction industry, as an overarching majority of construction companies are SMEs who account for the majority of employment and income generation within the industry. In the UK, previous research has identified construction SMEs as some of the worst affected by EWEs. Design/methodology/approach Given the recent occurrences of EWEs and predictions suggesting increases in both the intensity and frequency of EWEs in the future, improving the resilience of construction SMEs is vital for achieving a resilient construction industry. A conceptual framework is first developed which is then populated and expanded based on empirical evidence. Positioned within a pragmatic research philosophy, case study research strategy was adopted as the overall research strategy in undertaking this investigation. Findings Based on the findings of two in-depth case studies of construction SMEs, a framework was developed to represent EWE resilience of construction SMEs, where resilience was seen as a collective effect of vulnerability, coping strategies and coping capacities of SMEs, characteristics of the EWE and the wider economic climate. Originality/value The paper provides an original contribution towards the overarching agenda of the resilience of SMEs, and policy making in the area of EWE risk management by presenting a novel conceptual framework depicting the resilience of medium-sized construction companies.

Going beyond the rhetoric: system-wide changes in universities for sustainable societies

In October 2008, the 5th Environmental Management for Sustainable Universities (EMSU) international conference was held in Barcelona, Spain. It dealt with the need to rethink how our higher educational institutions are facing sustainability. This special issue has been primarily derived from contributions to that conference. This issue builds upon related academic international publications, which have analysed how to use the critical position of universities to accelerate their pace of working to help to make the transition to truly SUSTAINABLE SOCIETIES! This issue focus is on the ‘softer’ issues, such as changes in values, attitudes, motivations, as well as in curricula, societal interactions and assessments of the impacts of research. Insights derived from the interplay of the ‘softer’ issues with the ‘harder’ issues are empowering academic leaders to effectively use leverage points to make changes in operations, courses, curricula, and research. Those changes are being designed to help their students and faculty build resilient and sustainable societies within the context of climate change, the Decade of Education for Sustainable Development (DESD), and the UN Millennium Development Goals (MDGs). The overall systems approach presented by Stephens and Graham provides a structured framework to systematize change for sustainability in higher education, by stressing on the one hand the need for “learning to learn” and on the other hand by integrating leadership and cultural aspects. The “niche” level they propose for innovative interactions between practitioners such as EMSU is exemplary developed by all of the other documents in this special issue. To highlight some of the key elements of the articles in this issue, there are proposals for new educational methods based in sustainability science, a set of inspirational criteria for SD research activities, new course ranking and assessment methods and results of psychological studies that provide evidence that participatory approaches are the most effective way to change values within university members in order to facilitate the development and sharing of new sustainability norms.

Megtakarítási típusok - egy adaptív-evolúciós megközelítés = Types of saving - an adaptive-evolutionary approach

A közgazdaságtanban az ágensalapú modellezés egyik alkalmazási területe a makro ökonómia. Ebben a tanulmányban néhány népszerű megtakarítási szabály létét feltételezve adaptív-evolúciós megközelítésben endogén módon próbálunk következtetni e szabályok relatív életképességére. Három különböző típusú ágenst vezetünk be: egy prudens, egy rövidlátó és egy, a permanensjövedelem-elméletnek megfelelően működőt. Rendkívül erős szelekciós nyomás mellett a prudens típus egyértelműen kiszorítja a másik kettőt. A második legéletképesebbnek a rövidlátó típus tűnik, de már közepes szelekciós nyomásnál sem tűnik el egyik típus sem. Szokásos tőkehatékonyság mellett a prudens típus túlzott beruházási tendenciát visz a gazdaságba, és a gazdaság az aranykori megtakarítási rátánál magasabbat ér el. A hitelkorlátok oldása még nagyobb mértékű túlzott beruházáshoz vezethet, a hitelek mennyiségének növekedése mellett a tőketulajdonosok mintegy "kizsákmányoltatják" magukat azokkal, akiknek nincs tőkejövedelmük. A hosszú távú átlagos fogyasztás szempontjából a három típus kiegyensúlyozott aránya adja a legjobb eredményt, ugyanakkor ez jóval nagyobb ingadozással jár, mint amikor csak prudens típusú háztartások léteznek. ____ Agent-based modelling techniques have been employed for some time in macroeconomics. This paper tests some popular saving rules in an adaptive-evolutionary context of looking at their relative survival values. The three types are prudent, short-sighted, and responsive to the permanent-income hypothesis. It is found that where selection pressure is very high, only the prudent type persists. The second most resilient seems to be the short-sighted type, but all three coexist even at medium levels of selection pressure. When the efficiency of capital approaches the level usually assumed in macroeconomics, the prudent type drives the economy towards excessive accumulation of capital, i. e. a long-term savings rate that exceeds the golden rule. If credit constraints are relaxed, this tendency strengthens as credit grows and capital-owners seem to allow themselves to be exploited" by workers. From the angle of average consumption, the best outcome is obtained from a random distribution of types, although this is accompanied by higher volatility.

The effect of a reform on a school organizational culture after receiving a failing Florida Comprehensive Assessment Test rating

The purpose of this research was to explore the effects of a reform that took place in an elementary school during 2000/2001 as a result of a failure rating on the Florida Comprehensive Assessment Test on the structure and the personnel of the organization. ^ The exploration took place over a period of 10 months starting in August 2000 until June 2001. It focused on the effect of the failure rating on the: (a) structure and operation of the school; (b) morale, beliefs, behaviors, and daily lives of teachers and the principal; and (c) the effect of the reform effort on the leadership style of the principal, whether she became a transactional or a transformative leader. ^ The researcher assumed the role of a participant observer. Data sources were her personal recollections of major events that took place during the year of the reform, interviews, observations, and school documents. The sample included 15 teachers present during the time of the reform. Ten taught second through fifth grade. The remaining five participants were the music teacher, the counselor, and the writing, reading and technology specialists. Together they represented the instructional team or represented special education areas. ^ The findings indicated that the reform effort had an effect on the structure and the operation of the school. The changes included reorganization of the physical set up, changes in curriculum and instruction, changes in the means of communication among the staff, and the addition of new staff members including an official agent of change. The reform had a greater effect on the daily lives of teachers and their morale than on their beliefs and behaviors. Teachers reported that during the effort their daily lives were stressful and their morale very low due to the enormous expectations that they had to meet. On the other hand, the reform effort had a positive effect on the daily life, morale, beliefs, and behaviors of the principal. It energized her. She spoke positively about the change. She functioned as an effective, positive, resilient transactional leader who did what was necessary in order to enable the teachers to cope with the complex situation. ^

Enabling adaptability in service aggregates using transparent shaping techniques

Distributed applications are exposed as reusable components that are dynamically discovered and integrated to create new applications. These new applications, in the form of aggregate services, are vulnerable to failure due to the autonomous and distributed nature of their integrated components. This vulnerability creates the need for adaptability in aggregate services. The need for adaptation is accentuated for complex long-running applications as is found in scientific Grid computing, where distributed computing nodes may participate to solve computation and data-intensive problems. Such applications integrate services for coordinated problem solving in areas such as Bioinformatics. For such applications, when a constituent service fails, the application fails, even though there are other nodes that can substitute for the failed service. This concern is not addressed in the specification of high-level composition languages such as that of the Business Process Execution Language (BPEL). We propose an approach to transparently autonomizing existing BPEL processes in order to make them modifiable at runtime and more resilient to the failures in their execution environment. By transparent introduction of adaptive behavior, adaptation preserves the original business logic of the aggregate service and does not tangle the code for adaptive behavior with that of the aggregate service. The major contributions of this dissertation are: first, we assessed the effectiveness of BPEL language support in developing adaptive mechanisms. As a result, we identified the strengths and limitations of BPEL and came up with strategies to address those limitations. Second, we developed a technique to enhance existing BPEL processes transparently in order to support dynamic adaptation. We proposed a framework which uses transparent shaping and generative programming to make BPEL processes adaptive. Third, we developed a technique to dynamically discover and bind to substitute services. Our technique was evaluated and the result showed that dynamic utilization of components improves the flexibility of adaptive BPEL processes. Fourth, we developed an extensible policy-based technique to specify how to handle exceptional behavior. We developed a generic component that introduces adaptive behavior for multiple BPEL processes. Fifth, we identify ways to apply our work to facilitate adaptability in composite Grid services.