A Brushless Wound Rotor Induction Generator for Variable Speed Microhydel Plants Without Ballast Load

A new generator topology for microhydel power plants, capable of unsupervised operation, is proposed. While conventional microhydel plants operate at constant speed with switched ballast loads, the proposed generator, based on the wound rotor induction machine, operates at variable speed and does away with the need for ballast loads. This increases reliability and substantially decreases system costs and setup times. The proposed generator has a simplified decoupled control structure with stator-referenced voltage control similar to a conventional synchronous generator, and rotor-side frequency control that is facilitated by rotating electronics mounted on the rotor. While this paper describes an isolated plant, the topology can also be tailored for distributed generation enabling conversion of the available hydraulic power into useful electrical power when the grid is present, and supplying local loads in the event of grid outage.

Flexible implementation of power system corrective topology control

This paper proposes a novel decision making framework for optimal transmission switching satisfying the AC feasibility, stability and circuit breaker (CB) reliability requirements needed for practical implementation. The proposed framework can be employed as a corrective tool in day to day operation planning scenarios in response to potential contingencies. The switching options are determined using an efficient heuristic algorithm based on DC optimal power flow, and are presented in a multi-branch tree structure. Then, the AC feasibility and stability checks are conducted and the CB condition monitoring data are employed to perform a CB reliability and line availability assessment. Ultimately, the operator will be offered multiple AC feasible and stable switching options with associated benefits. The operator can use this information, other operating conditions not explicitly considered in the optimization, and his/her own experience to implement the best and most reliable switching action(s). The effectiveness of the proposed approach is validated on the IEEE-118 bus test system. (C) 2015 Elsevier B.V. All rights reserved.

Computation of Viscous Incompressible Flow using Pressure Correction Method on Unstructured Chimera Grid

In this paper, a pressure correction algorithm for computing incompressible flows is modified and implemented on unstructured Chimera grid. Schwarz method is used to couple the solutions of different sub-domains. A new interpolation to ensure consistency between primary variables and auxiliary variables is proposed. Other important issues such as global mass conservation and order of accuracy in the interpolations are also discussed. Two numerical simulations are successfully performed. They include one steady case, the lid-driven cavity and one unsteady case, the flow around a circular cylinder. The results demonstrate a very good performance of the proposed scheme on unstructured Chimera grids. It prevents the decoupling of pressure field in the overlapping region and requires only little modification to the existing unstructured Navier–Stokes (NS) solver. The numerical experiments show the reliability and potential of this method in applying to practical problems.

Optimal bounded control of first-passage failure of quasi-integrable Hamiltonian systems with wide-band random excitation

The optimal bounded control of quasi-integrable Hamiltonian systems with wide-band random excitation for minimizing their first-passage failure is investigated. First, a stochastic averaging method for multi-degrees-of-freedom (MDOF) strongly nonlinear quasi-integrable Hamiltonian systems with wide-band stationary random excitations using generalized harmonic functions is proposed. Then, the dynamical programming equations and their associated boundary and final time conditions for the control problems of maximizinig reliability and maximizing mean first-passage time are formulated based on the averaged It$\ddot{\rm o}$ equations by applying the dynamical programming principle. The optimal control law is derived from the dynamical programming equations and control constraints. The relationship between the dynamical programming equations and the backward Kolmogorov equation for the conditional reliability function and the Pontryagin equation for the conditional mean first-passage time of optimally controlled system is discussed. Finally, the conditional reliability function, the conditional probability density and mean of first-passage time of an optimally controlled system are obtained by solving the backward Kolmogorov equation and Pontryagin equation. The application of the proposed procedure and effectiveness of control strategy are illustrated with an example.

Detección oportuna de niños en riesgo pre-lector : ponderación del valor potencial de instrumentos de evaluación de la consciencia fonológica

Se evalúan validez, confiabilidad y nivel de dificultad de instrumentos de evaluación de la conciencia fonológica, a fin de analizar su potencialidad como herramientas de detección oportuna, de pre-lectores en riesgo en una muestra de niños que crecen en un ambiente de vulnerabilidad social. Los instrumentos se seleccionaron en función de los dos niveles de CF: unidad lingüística y nivel de dificultad. Se ponderó la validez del instrumento mediante la técnica de análisis de contenido de investigaciones previas. Obtuvo buena confiabilidad (alpha de Cronbach: 0.84) y potencialidad discriminativa. Se hallan niveles diferenciales de dificultad en la resolución de las distintas tareas en pre-lectores en riesgo en comparación con buenos lectores de la misma edad. El análisis de regresión simple destaca el valor predictivo de las tareas de evaluación seleccionadas en este estudio sobre el posterior nivel alcanzado por los niños en habilidades básicas de la lectura.

Search For Critical Slip Surface In Slope Stability Analysis By Spline-Based Ga Method

The stability of a soil slope is usually analyzed by limit equilibrium methods, in which the identification of the critical slip surface is of principal importance. In this study the spline curve in conjunction with a genetic algorithm is used to search the critical slip surface, and Spencer's method is employed to calculate the factor of safety. Three examples are presented to illustrate the reliability and efficiency of the method. Slip surfaces defined by a series of straight lines are compared with those defined by spline curves, and the results indicate that use of spline curves renders better results for a given number of slip surface nodal points comparing with the approximation using straight line segments.

Escala de Creencias Post-Críticas : análisis psicométrico para su aplicación al estudio de la religiosidad en Argentina

Resumen: Se analizan las propiedades psicométricas de la escala de creencias post-críticas (PCBS) en una muestra de 410 ciudadanos de 18 a 55 años de Córdoba/Argentina, seleccionados a partir de un muestreo no aleatorio. La escala fue traducida para el contexto local. A partir del uso complementario de Escalamiento Multidimensional y Análisis Factorial de componentes principales, se replican las dos dimensiones constitutivas de la PCBS (inclusión-exclusión en la trascendencia e interpretación literal-simbólica de los contenidos religiosos) y las cuatro sub-escalas propuestas: Crítica Externa, Segunda Ingenuidad, Ortodoxia, y Relativismo. El estudio reporta los índices de fiabilidad y la validez externa para cada una de éstas, y se discuten cuestiones operativas y conceptuales de su adecuación en Argentina.

Laser-induced wavy pattern formation in metal thin films

Laser-induced well-ordered and controllable wavy patterns are constructed in the deposited metal thin film. The micrometer-sized structure and orientation of the wavy patterns can be controlled via scanning a different size of rectangle laser spot on the films. Ordered patterns such as aligned, crossed, and whirled wave structures were designed over large areas. This patterning technique may find applications in both exploring the reliability and mechanical properties of thin films, and fabricating microfluidic devices. (C) 2004 American Institute of Physics.

Digging into signs: Developing standard annotation practices for cross-linguistic, quantitative analysis of sign language data. Final Report.

For sign languages used by deaf communities, linguistic corpora have until recently been unavailable, due to the lack of a writing system and a written culture in these communities, and the very recent advent of digital video. Recent improvements in video and computer technology have now made larger sign language datasets possible; however, large sign language datasets that are fully machine-readable are still elusive. This is due to two challenges. 1. Inconsistencies that arise when signs are annotated by means of spoken/written language. 2. The fact that many parts of signed interaction are not necessarily fully composed of lexical signs (equivalent of words), instead consisting of constructions that are less conventionalised. As sign language corpus building progresses, the potential for some standards in annotation is beginning to emerge. But before this project, there were no attempts to standardise these practices across corpora, which is required to be able to compare data crosslinguistically. This project thus had the following aims: 1. To develop annotation standards for glosses (lexical/word level) 2. To test their reliability and validity 3. To improve current software tools that facilitate a reliable workflow Overall the project aimed not only to set a standard for the whole field of sign language studies throughout the world but also to make significant advances toward two of the world’s largest machine-readable datasets for sign languages – specifically the BSL Corpus (British Sign Language, http://bslcorpusproject.org) and the Corpus NGT (Sign Language of the Netherlands, http://www.ru.nl/corpusngt).

Research Software Sustainability: Report on Knowledge Exchange Workshop

The report introduces software sustainability, provides definitions, clearly demonstrates that software is not the same as data and illustrates aspects of sustainability in the software lifecycle. The recommendations state that improving software sustainability requires a number of changes: some technical and others societal, some small and others significant. We must start by raising awareness of researchers’ reliance on software. This goal will become easier if we recognise the valuable contribution that software makes to research – and reward those people who invest their time into developing reliable and reproducible software. The adoption of software has led to significant advances in research. But if we do not change our research practices, the continued rise in software use will be accompanied by a rise in retractions. Ultimately, anyone who is concerned about the reliability and reproducibility of research should be concerned about software sustainability. Beside highlighting the benefits of software sustainability and addressing the societal and technical barriers to software sustainability, the report provides access to expertise in software sustainability and outlines the role of funders. The report concludes with a short landscape of national activities in Europe and outside Europe. As a result of the workshop steps will be explored to establish European coordination and cooperation of national initiatives.

Análisis del mercado del rating de las emisiones de titulación en España (1993-2011)

[ES] La calificación crediticia externa es un elemento clave para el buen fin de las operaciones de titulización. No obstante, las agencias de calificación han sido objeto de una intensa controversia, cuestionándose su fiabilidad y objetividad. En este trabajo abundamos en esta cuestión, analizando la distribución de los ratings otorgados a las emisiones de bonos de titulización llevadas a cabo en España (1993-2011), uno de los países más activos en cuanto al volumen de emisiones, llegaron a ocupar el segundo puesto a nivel europeo y el tercero a nivel mundial. Aportamos evidencia sobre ciertas anomalías entre las que cabe destacar la estructura oligopolística del mercado del rating, la fragilidad desde una perspectiva histórica de las calificaciones otorgadas, y la existencia de patrones no homogéneos en la elección de la agencia de calificación, tanto si se tiene en cuenta la sociedad gestora, como el colateral de respaldo.

Proof of Concept of Impact Detection in Composites Using Fiber Bragg Grating Arrays

Impact detection in aeronautical structures allows predicting their future reliability and performance. An impact can produce microscopic fissures that could evolve into fractures or even the total collapse of the structure, so it is important to know the location and severity of each impact. For this purpose, optical fibers with Bragg gratings are used to analyze each impact and the vibrations generated by them. In this paper it is proven that optical fibers with Bragg gratings can be used to detect impacts, and also that a high-frequency interrogator is necessary to collect valuable information about the impacts. The use of two interrogators constitutes the main novelty of this paper.

Meteorological Buoy Sensor Workshop, Solomons, Maryland, April 19-21, 2006: workshop proceedings

The co-organized Alliance for Coastal Technologies (ACT) and National Data Buoy Center (NDBC) Workshop "Meteorological Buoy Sensors Workshop" convened in Solomons, Maryland, April 19 to 21,2006, sponsored by the University of Maryland Center for Environmental Science (UMCES) Chesapeake Bay Laboratory (CBL), an ACT partner institution. Participants from various sectors including resource managers and industry representatives collaborated to focus on technologies and sensors that measure the near surface variables of wind speed and direction, barometric pressure, humidity and air temperature. The vendor list was accordingly targeted at companies that produced these types of sensors. The managers represented a cross section of federal, regional and academic marine observing interests from around the country. Workshop discussions focused on the challenges associated with making marine meteorological observations in general and problems that were specific to a particular variable. Discussions also explored methods to mitigate these challenges through the adoption of best practices, improved technologies and increased standardization. Some of the key workshop outcomes and recommendations included: 0cean.US should establish a committee devoted to observations. The committee would have a key role in developing observing standards. The community should adopt the target cost, reliability and performance standards drafted for a typical meteorological package to be used by a regional observing system. A forum should be established to allow users and manufacturers to share best practices for the employment of marine meteorological sensors. The ACT website would host the forum. Federal activities that evaluate meteorological sensors should make their results publicly available. ACT should extend their evaluation process to include meteorological sensors. A follow on workshop should be conducted that covers the observing of meteorological variables not addressed by this workshop. (pdf contains 18 pages)

Dissolved oxygen probes: making oxygen measurements routine like temperature, St Petersburg, Florida, January 4-6, 2006: workshop proceedings

The Alliance for Coastal Technologies (ACT) Workshop "Making Oxygen Measurements Routine Like Temperature" was convened in St. Petersburg, Florida, January 4th - 6th, 2006. This event was sponsored by the University of South Florida (USF) College of Marine Science, an ACT partner institution and co-hosted by the Ocean Research Interactive Observatory Networks (ORION). Participants from researcldacademia, resource management, industry, and engineering sectors collaborated with the aim to foster ideas and information on how to make measuring dissolved oxygen a routine part of a coastal or open ocean observing system. Plans are in motion to develop large scale ocean observing systems as part of the US Integrated Ocean Observing System (100s; see http://ocean.us) and the NSF Ocean Observatory Initiative (001; see http://www.orionprogram.org/00I/default.hl). These systems will require biological and chemical sensors that can be deployed in large numbers, with high reliability, and for extended periods of time (years). It is also likely that the development cycle for new sensors is sufficiently long enough that completely new instruments, which operate on novel principles, cannot be developed before these complex observing systems will be deployed. The most likely path to development of robust, reliable, high endurance sensors in the near future is to move the current generation of sensors to a much greater degree of readiness. The ACT Oxygen Sensor Technology Evaluation demonstrated two important facts that are related to the need for sensors. There is a suite of commercially available sensors that can, in some circumstances, generate high quality data; however, the evaluation also showed that none of the sensors were able to generate high quality data in all circumstances for even one month time periods due to biofouling issues. Many groups are attempting to use oxygen sensors in large observing programs; however, there often seems to be limited communication between these groups and they often do not have access to sophisticated engineering resources. Instrument manufacturers also do not have sufficient resources to bring sensors, which are marketable, but of limited endurance or reliability, to a higher state of readiness. The goal of this ACT/ORION Oxygen Sensor Workshop was to bring together a group of experienced oceanographers who are now deploying oxygen sensors in extended arrays along with a core of experienced and interested academic and industrial engineers, and manufacturers. The intended direction for this workshop was for this group to exchange information accumulated through a variety of sensor deployments, examine failure mechanisms and explore a variety of potential solutions to these problems. One anticipated outcome was for there to be focused recommendations to funding agencies on development needs and potential solutions for 02 sensors. (pdf contains 19 pages)

Technologies for Measuring Currents in Coastal Environments, Portland, Maine, October 26-28, 2005:workshop proceedings

The Alliance for Coastal Technologies (ACT) Workshop entitled "Technologies for Measuring Currents in Coastal Environments" was held in Portland, Maine, October 26-28, 2005, with sponsorship by the Gulf of Maine Ocean Observing System (GoMOOS), an ACT partner organization. The primary goals of the event were to summarize recent trends in nearshore research and management applications for current meter technologies, identify how current meters can assist coastal managers to fulfill their regulatory and management objectives, and to recommend actions to overcome barriers to use of the technologies. The workshop was attended by 25 participants representing state and federal environmental management agencies, manufacturers of current meter technologies, and researchers from academic institutions and private industry. Common themes that were discussed during the workshop included 1) advantages and limitations of existing current measuring equipment, 2) reliability and ease of use with each instrument type, 3) data decoding and interpretation procedures, and 4) mechanisms to facilitate better training and guidance to a broad user group. Seven key recommendations, which were ranked in order of importance during the last day of the workshop are listed below. 1. Forums should be developed to facilitate the exchange of information among users and industry: a) On-line forums that not only provide information on specific instruments and technologies, but also provide an avenue for the exchange of user experiences with various instruments (i.e. problems encountered, cautions, tips, advantages, etc). (see References for manufacturer websites with links to application and technical forums at end of report) b) Regional training/meetings for operational managers to exchange ideas on methods for measuring currents and evaluating data. c) Organize mini-meetings or tutorial sessions within larger conference venues. 2. A committee of major stakeholders should be convened to develop common standards (similar to the Institute of Electrical and Electronics Engineers (IEEE) committee) that enable users to switch sensors without losing software or display capabilities. (pdf contains 28 pages)