Skeletal and dental components of Class II correction with the bionator and removable headgear splint appliances

The purpose of this study was to differentiate the dentoalveolar and skeletal effects to better understand orthodontic treatment. We evaluated the treatment changes associated with the bionator and the removable headgear splint (RHS). Methods: The sample comprised 51 consecutively treated Class II patients from 1 office who had all been successfully treated with either a bionator (n = 17) or an RHS appliance (n = 17). Class II patients waiting to start treatment later served as controls (n = 17). A modified version of the Johnston pitchfork analysis was used to quantify the dentoalveolar and skeletal contributions to the anteroposterior correction at the levels of the molars and the incisors. Results: Both appliances significantly improved anteroposterior molar relationships (2.15 mm for the bionator, 2.27 mm for the RHS), primarily by dentoalveolar modifications (1.49 and 2.36 mm for the bionator and the RHS, respectively), with greater maxillary molar distalization in the RHS group. Overjet relationships also improved significantly compared with the controls (3.11 and 2.12 mm for the bionator and the RHS, respectively), due primarily to retroclination of the maxillary incisors (2.2 and 2.38 mm for the bionator and the RHS, respectively). The differences between overall corrections and dentoalveolar modifications for both molar and overjet relationships were explained by skeletal responses, with the bionator group showing significantly greater anterior mandibular displacement than the RHS group. Conclusions: The bionator and the RHS effectively corrected the molar relationships and overjets of Class II patients primarily by dentoalveolar changes. (Am J Orthod Dentofacial Orthop 2008; 134: 732-41)

Peroxidase and phenylalanine ammonia-lyase activities, phenolic acid contents, and allelochemicals-inhibited root growth of soybean

The influence of the allelochemicals ferulic (FA) and vanillic (VA) acids on peroxidase (POD, EC 1.11.1.7) and phenylalanine ammonia-lyase (PAL, EC 4.3.1.5) activities and their relationships with phenolic acid (PhAs) contents and root growth of soybean (Glycine max (L.) Merr.) were examined. Three-day-old seedlings were cultivated in nutrient solution containing FA or VA (0.1 to 1 mM) for 48 h. Both compounds (at 0.5 and 1 mM) decreased root length (RL), fresh weight (FW) and dry weight (DW) and increased PhAs contents. At 0.5 and 1 mM, FA increased soluble POD activity (18% and 47%, respectively) and cell wall (CW)-bound POD activity (61% and 34%), while VA increased soluble POD activity (33% and 17%) but did not affect CW-bound POD activity. At I mM, FA increased (82%) while VA reduced (32%) PAL activities. The results are discussed on the basis of the role of these compounds on phenylpropanoid metabolism and root growth and suggest that the effects caused on POD and PAL activities are some of the many mechanisms by which allelochemicals influence plant growth.

A set of polymorphic microsatellite loci for Vriesea gigantea and Alcantarea imperialis (Bromeliaceae) and cross-amplification in other bromeliad species

Fifteen polymorphic microsatellite markers were isolated and characterized in two species of Bromeliaceae: Vriesea gigantea and Alcantarea imperialis. The number of alleles observed for each locus ranged from three to 16. The loci will be used for studies of the genetic structure of natural populations, reproductive biology, and evolutionary relationships among and within these genera. A cross-amplification test in 22 taxa suggests that the markers will be useful for similar applications in numerous other bromeliad species.

5S rDNA characterization in twelve Sciaenidae fish species (Teleostei, Perciformes): depicting gene diversity and molecular markers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Spermatic characteristics and sperm evolution on the subfamily Stevardiinae (Ostariophysi: Characiformes: Characidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The shared influence of phylogeny and ecology on the reproductive patterns of Myrteae (Myrtaceae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

q-Analog of the gap equation for cuprates

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Molecular phylogeny, morphology and their implications for the taxonomy of Eriocaulaceae

Eriocaulaceae é uma família pantropical com dez gêneros e cerca de 1.400 espécies, com centro de diversidade no Novo Mundo, especialmente no Brasil. A última revisão da família foi publicada há mais de 100 anos, e até recentemente, as relações genéricas e infra-genéricas ainda eram pouco resolvidas. Entretanto, tem havido nos últimos 30 anos, um grande esforço por parte de pesquisadores brasileiros para preencher as lacunas existentes, utilizando caracteres morfológicos e anatômicos, complementados por dados adicionais de diferentes fontes, como palinologia, química, embriologia, genética de populações, citologia e, mais recentemente, estudos de filogenia molecular. Tal conjunto de dados tem levado a uma re-avaliação do relacionamento filogenético dentro da familia. Neste trabalho são apresentados novos dados para as regiões de ITS e trnL-F, analisadas separadamente e em combinação, usando máxima parcimônia e inferência Bayesiana. Os dados obtidos confirmam resultados já publicados, e mostram que muitos caracteres tradicionalmente usados para diferenciação e circunscrição dos gêneros dentro da família são homoplásicos. Uma nova descrição e chave genérica para a família, utilizando caracteres de várias fontes são apresentadas, refletindo a taxonomia atual das Eriocaulaceae.

Soil loss risk and habitat quality in streams of a meso-scale river basin

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Physical, chemical and microbiological characterization of the intertidal sediments of Pereque Beach, Guaruja (SP), Brazil

Physical and chemical characteristics of intertidal sediments and their relationships with bacteria and cyanobacteria, were analyzed at four stations at Pereque Beach. Granulometric analysis showed that Pereque beach has sediment that is classified as sand. The lowest value of the sediment C/N rates (6.08), mainly due to a higher concentration of organic nitrogen, was found at the northern part of Pereque Beach, where organic matter of marine source was more prominent. In this area, density (9.6 x 106 cells cm(-3)), biomass (1992.04 ngC cm(-3)) and activity of bacteria were higher than at the southern end. In contrast, cyanobacteria density varied from 2.0 to 4.0 x 10(5) cells cm(-3), with biomass and total chlorophyll a of the sediment being higher at the southern part, where there are water input from Pereque River and higher organic matter of continental origin. The variability in the microbial population is discussed in the light of the sediment granulometry, organic matter quality, fresh water inflow and pollution. (c) 2007 Elsevier Ltd. All rights reserved.

Rheological properties of frozen concentrated orange juice (FCOJ) as a function of concentration and subzero temperatures

Data on flow properties of Frozen Concentrated Orange Juice (FCOJ) produced from oranges cv. Pera-Rio (65.04 Brix, 8.8% w/w pulp content, 2.5% w/w pectin, 3.84% citric acid, 1.293 g cm(-3)) from -18 to 0 degrees C were fitted with appropriate predictive models. The power law model was found to be the most appropriate to fit the flow curves obtained for FCOJ between 46.56 and 65.04 degrees Brix. In higher concentrations, thixotropy was observed and showed more temperature dependence. A single equation combining Arrhenius and exponential relationships was applied to describe the temperature effect and shear rate on the quantity of breakdown of FCOJ.

Temporal distribution and composition of the ichthyoplankton from Leopoldo's Inlet on the Upper Parana River floodplain (Brazil)

Temporal distribution and composition of ichthyoplankton and their relationships with some environmental variables of Leopoldo's Inlet (Ressaco do Leopoldo) on the upper Parana River floodplain, southern Brazil, were analysed. Samples were taken from February 1991 to February 1992, and 3480 larvae were collected. The highest density of larvae was observed in November 1991 (36.79 larvae/ 10 m(3)) at night (night/day ratio 7: 1). Species composition showed a predominance of Characiformes (80%). There was a high density (4.28 larvae/10 m(3)) of Bryconamericus stramineus throughout almost the whole study period, the majority of the species were more frequently collected at night. Pearson's correlation indicated a relationship between larval density, temperature, and pluviometric index. Leopoldo's Inlet, whose ichthyofauna is mainly composed of grazing and resident species. shows favourable conditions for fish reproduction and development.

Genetic parameters estimate for milk and mozzarella cheese yield, fat and protein percentage in dairy buffaloes in Brazil

The aim of this study was analyze the (co)variance components and genetic and phenotypic relationships in the following traits: accumulated milk yield at 270 days (MY270,), observed until 305 days of lactation; accumulated milk yield at 270 days (MY270/A) and at 305 days (MY305), observed until 335 days of lactation; mozzarella cheese yield (MCY) and fat (FP) and protein (PP) percentage, observed until 335 days of lactation. The (co)variance components were estimated by Restricted Maximum Likelihood methodology in analyses single, two and three-traits using animal models. Heritability estimated for MY270, MY270/A, MY305, MCY, FP and PP were 0.22; 0.24, 0.25, 0.14, 0.29 and 0.40 respectively. The genetic correlations between MCY and the variables MY270, MY270/A, MY305, PP and FP was: 0.85; 1.00; 0.89; 0.14 and 0.06, respectively. This way, the selection for the production of milk in long period should increase MCY. However, in the search of animals that produce milk with quality, the genetic parameters suggest that another index should be composed allying these studied traits.

KARYOTYPIC ANALYSIS AND CHROMOSOME BIOMETRY OF CELL-CULTURES OF THE YELLOW-THROATED ALLIGATOR (CAIMAN-LATIROSTRIS DAUDIN)

Blood from eight specimens of both sexes of the alligator Caiman latirostris was collected and incubated in culture medium. Conventional as well as chromosomal banding (C and NOR) techniques were used.The diploid number was determined as 42, being 24 telocentric, 12 metacentric and six submetacentric, with real lengths varying from 1.49 to 6.08, 1.63 to 3.71, and 2.41 to 3.19 mum, respectively. The fundamental number was 60. About 81% of the chromosomes were small and 19% medium in size. NOR-banding was presented for the first time for this species and it was verified that only one submetacentric pair (no. 20) was marked on arm q, and under conventional staining it presented a secondary constriction. There was no association between NOR marked chromosomes.

Experimental and theoretical study of workpiece temperature when end milling hardened steels using (TiAl)N-coated and PcBN-tipped tools

The present work shows an experimental and theoretical study on heat flow when end milling, at high-speed, hardened steels applied to moulds and dies. AISI H13 and AISI D2 steels were machined with two types of ball nose end mills: coated with (TiAl)N and tipped with PcBN. The workpiece geometry was designed to simulate tool-workpiece interaction in real situations found in mould industries, in which complex surfaces and thin walls are commonly machined. The compressed and cold air cooling systems were compared to dry machining Results indicated a relatively small temperature variation, with higher range when machining AISI D2 with PcBN-tipped end mill. All cooling systems used demonstrated good capacity to remove heat from the machined surface, especially the cold air. Compressed air was the most indicated to keep workpiece at relatively stable temperature. A theoretical model was also proposed to estimate the energy transferred to the workpiece (Q) and the average convection coefficient ((h) over bar) for the cooling systems used. The model used a FEM simulation and a steepest decent method to find the best values for both variables. (c) 2007 Elsevier B.V. All rights reserved.