Using Participatory Design (PD) as youth engagement strategy to inform design and development of evidence-based wellbeing e-tools

The paper presents a participatory design research framework as a primary method for structuring youth engagement, participation and contribution to the design, development and usability evaluation of three evidencebased e-tools for wellbeing, which include smart phone mobile apps as well as e-health websites. The three projects are part of a series of six e-tools part of Safe and Supportive program under Young and Well CRC. The participatory design method, developed by Zelenko (2012) for application in design of online health promoting technologies, was further piloted in partnership with Inspire USA for specific application within the CRC, deploying a combination of creative design workshops and speculative design activities in developing e-tool prototypes with young people. This paper presents the resulting participatory research framework as it was implemented across the e-tool projects to facilitate active youth participation in co-designing the e-tools and ensuring the final designs are relevant to young people and deliver health messages in engaging ways. The principles of Participatory Design (PD) that inform the new framework include a high degree of participant agency in creative decisionmaking and a commitment to the process of co-designing, with young people working alongside designers and developers. The paper will showcase how the PD framework was applied across three projects to increase young people’s contribution to final design outcome.

Narratives of possession : reading for saga authorship

The aim of this thesis is to show how character analysis can be used to approach conceptions of saga authorship in medieval Iceland. The idea of possession is a metaphor that is adopted early in the thesis, and is used to describe Icelandic sagas as works in which traditional material is subtly interpreted by medieval authors. For example, we can say that if authors claim greater possession of the sagas, they interpret, and not merely record, the sagas' historical information. On the other hand, tradition holds onto its possession of the narrative whenever it is not possible for an author to develop his own creative and historical interests. The metaphor of possession also underpins the character analysis in the thesis, which is based on the idea that saga authors used characters as a vehicle by which to possess saga narratives and so develop their own historical interests. The idea of possession signals the kinds of problems of authorship study which are addressed here, in particular, the question of the authors' sense of saga writing as an act either of preservation or of creation. While, in that sense, the thesis represents an additional voice in a long-standing debate about the saga writers' relation to their source materials, I argue against a clear-cut distinction between creative and non-creative authors, and focus instead on the wide variation in authorial control over saga materials. This variation suggests that saga authorship is a multi-functional activity, or one which co-exists with tradition. Further, by emphasising characterisation as a method, I am adding to the weight of scholarship that seeks to understand the sagas in terms of their literary effects. The Introduction and chapter one lay out the theoretical scope of this thesis. My aim in these first two sections is to inform the reader of the type of critical questions that arise when authorship is approached in relation to characterisation, and to suggest an interpretive framework with which to approach these questions. In the Introduction this aim manifests as a brief discussion of the application of the term "authorship" to the medieval Icelandic corpus, a definition of the scope of this study, and an introduction to the connections, made throughout this thesis, between saga authors, the sagas' narrative style, and the style of characterisation in the sagas. Chapter one is a far more detailed discussion of our ability to make these connections. In particular, the chapter develops the definition of the analytical term "secondary authorship" that I introduce in order to delineate the type of characterisation that is of most interest in this thesis. "Secondary authorship" is a literary term that aims to sharpen our approach to saga authors' relationship to their characters by focusing on characters who make representations about the events of the saga. The term refers to any instance in which characters behave in a manner that resembles the creativity, interpretation, and understanding associated with authorship more generally. Character analysis cannot, however, be divorced from socio-historical approaches to the saga corpus. Most importantly, the sagas themselves are socio-historical representations that claim some degree of truth value. This claim that the sagas make by implication about their historicity is the starting point of a discussion of authorship in medieval Iceland. Therefore, at the beginning of chapter one I discuss some of the approaches to the social context of saga writing. This discussion serves as an introduction to both the culture of saga writing in medieval Iceland and to the nature of the sagas' historical perspective, and reflects my sense that literary interpretations of the sagas cannot be isolated from the historical discourses that frame them. The chapter also discusses possession, which, as I note above, is used alongside the concept of secondary authorship to describe the saga authors' relationship with the stories and characters of the past. At the close of chapter one, I offer a preliminary list the various functions of saga authorship, and give some examples of secondary authorship. From this point I am able to tie my argument about secondary authorship to specific examples from the sagas. Chapter two examines the effect of family obligations and domestic points of view in the depiction of characters' choices and conception of themselves. The examples that are given in that chapter - from Gisla saga Súrssonar and Íslendinga saga - are the first of a number of textual analyses that demonstrate the application of the concepts of secondary authorship and possession of saga narratives. The relationship between narratives about national and domestic matters shows how authorial creativity in the area of kinship obligation provides the basis for the saga's development of historical themes. Thus, the two major case studies given in chapter two tie authorial engagement with characters to the most influential social institution in early and medieval Iceland, the family. The remaining chapters represent similar attempts to relate authorial possession of saga characters to central socio-historical themes in the sagas, such as the settlement process in early Iceland and its influence on the development of regional political life (chapter three). Likewise, the strong authorial interest in an Icelander's journey to Norway in Heimskringla is presented as evidence of the author's use of a saga character to express an Icelandic interpretation of Norwegian history and to promote a sense that Iceland shared the ownership of regal history with Norway (chapter four). In that authorial engagement with the Icelander abroad, we witness saga characterisation being used as a basis for historical interpretation and the means by which foreign traditions and influence, not least the narratives of royal lives and of the Christianisation, are claimed as part of medieval Icelanders' self-conception. While saga authors observe the conventions of saga narration, characters are often subtly positioned as the authors' interpretive mirrors, especially clear than when they act as secondary authors. Nowhere is this more apparent than in Brennu- Njáls saga, which contains many characters who voice the author's claim to interpret the past. Even Hrútr Herjólfsson, through his remarkable perception of events and his conspicuous comments about them, acts as a secondary author by enabling the author to emphasise the importance of the disposition of characters. In Laxdœla saga and Þorgils saga ok Hafliða, authorial interest in characters' perception is matched by the thematising of learning, from the inception of knowledge as prophecy or advice to complete understanding by saga characters (chapter six). In Þorgils saga skarða, a character's inner development from an excessively ambitious and politically ruthless youth to a Christian leader killed by his kinsman allows the author to shape a political life into a lesson about leadership and the community's ability to moderate and contain the behaviour of extraordinary individuals. The portrayal draws on methods of characterisation that we can identify in Grettis saga Ásmundarson, Fóstbrœðra saga, and Orkneyinga saga. A comparison of the characterisation of figures with intense political or military ambitions suggests that saga authors were interested in the community's ability to balance their strength and ability with a degree of social moderation. The discussion of these sagas shows that character study can be used to analyse how the saga authors added their own voice to the voices passed down to medieval Icelanders in traditional narratives. Authorial engagement with characters allowed inherited traditions about early Norway and Iceland and records of thirteenth century events to be transformed into sophisticated historical works with highly creative elements. Through secondary authorship, saga authors took joint-possession of narratives and contested the power of tradition in setting the interpretive framework of a saga.

Pressure state response-based method for evaluating social benefits from smart grid development

In this paper, the inherent mechanism of social benefits associated with smart grid development is examined based on the pressure state response (PSR) model from resource economics. The emerging types of technology brought up by smart grid development are regarded as pressures. The improvements of the performance and efficiency of power system operation, such as the enhanced capability of accommodating renewable energy generation, are regarded as states. The effects of smart grid development on society are regarded as responses. Then, a novel method for evaluating social benefits from smart grid development is presented. Finally, the social benefits from smart grid development in a province in northwest China are carried out by using the developed evaluation system, and reasonable evaluation results are attained.

Assessing capacity in the context of testamentary, enduring power of attorney, and advance care directive documents in Australia

Balancing the competing interests of autonomy and protection of individuals is an escalating challenge confronting an ageing Australian population. Legal and medical professionals are increasingly being asked to determine whether individuals are legally capable to make their own testamentary, financial and/or personal/health care decisions. Diseases such as dementia impact upon cognition which necessitates collaboration between the legal and medical professions to satisfactorily assess the effect of such mentally disabling conditions upon legal competency. Terminological and methodological differences exist between the two professions when assessing capacity in this context which subsequently create miscommunication and misunderstanding. Consequently, it is not necessarily a simple solution for a legal professional to seek the opinion of a medical practitioner. Exacerbating the situation is the fact that no consistent and transparent capacity assessment paradigm currently exists in Australia. Assessments are instead being undertaken on an ad hoc basis dependent upon the skill set of the legal and/or medical professionals involved. A qualitative study seeking the views of legal and medical professionals who practise in this area has been conducted. This incorporated a review of the relevant literature and surveys which informed the semi-structured interviews conducted with 10 legal and 20 medical practitioners. Practitioners were asked whether there is a standard approach to assessment and whether national guidelines would assist. The general consensus was that uniform guidelines would be advantageous. The research also canvassed practitioner views as to the state of the relationship between the professions when assessing capacity. Three promising practices have emerged from this research: first, is the need for the development of national guidelines and supporting principles to satisfactorily assess capacity; second, is the possibility of strengthening the relationship between legal and medical professionals to assist in the satisfactory assessment of legal capacity; and third, the need for increased community education.

Effect of doping with Co and/or Cu on electronic structure and optical properties of ZnO

This paper reports on ab initio numerical simulations of the effect of Co and Cu dopings on the electronic structure and optical properties of ZnO, pursued to develop diluted magnetic semiconductors vitally needed for spintronic applications. The simulations are based upon the Perdew-Burke-Enzerh generalized gradient approximation on the density functional theory. It is revealed that the electrons with energies close to the Fermi level effectively transfer only between Cu and Co ions which substitute Zn atoms, and are located in the neighbor sites connected by an O ion. The simulation results are consistent with the experimental observations that addition of Cu helps achieve stable ferromagnetism of Co-doped ZnO. It is shown that simultaneous insertion of Co and Cu atoms leads to smaller energy band gap, redshift of the optical absorption edge, as well as significant changes in the reflectivity, dielectric function, refractive index, and electron energy loss function of ZnO as compared to the doping with either Co or Cu atoms. These highly unusual optical properties are explained in terms of the computed electronic structure and are promising for the development of the next-generation room-temperature ferromagnetic semiconductors for future spintronic devices on the existing semiconductor micromanufacturing platform.

Development and pilot study of the Primary Care Practice Improvement Tool (PC-PIT) : an innovative approach

Objective To assess the usability and validity of the Primary Care Practice Improvement Tool (PC-PIT), a practice performance improvement tool based on 13 key elements identified by a systematic review. It was co-created with a range of partners and designed specifically for primary health care. Design This pilot study examined the PC-PIT using a formative assessment framework and mixed-methods research design. Setting and participants Six high-functioning general practices in Queensland, Australia, between February and July 2013. A total of 28 staff participated — 10 general practitioners, six practice or community nurses, 12 administrators (four practice managers; one business manager and eight reception or general administrative staff). Main outcome measures Readability, content validity and staff perceptions of the PC-PIT. Results The PC-PIT offers an appropriate and acceptable approach to internal quality improvement in general practice. Quantitative assessment scores and qualitative data from all staff identified two areas in which the PC-PIT required modification: a reduction in the indicative reading age, and simplification of governance-related terms and concepts. Conclusion The PC-PIT provides an innovative approach to address the complexity of organisational improvement in general practice and primary health care. This initial validation will be used to develop a suite of supporting, high-quality and free-to-access resources to enhance the use of the PC-PIT in general practice. Based on these findings, a national trial is now underway.

Electrical insulation of high voltage inductor with co-axial electrode at floating voltage

Inductive fault current limiters (FCLs) have several advantages, such as significant current limitation, immediate triggering and relatively low losses. Despite these advantages, saturated core FCLs have not been commercialized due to its large size and associated high costs. A major remaining challenge is to reduce the footprint of the device. In this paper, a solution to reduce the overall footprint is proposed and discussed. In arrangements of windings on a core in reactors such as FCLs, the core is conventionally grounded. The electrical insulation distance between high voltage winding and core can be reduced if the core is left at floating potential. This paper shows the results of the investigation carried out on the insulation of such a coil-core assembly. Two experiments were conducted. In the first, the behavior of the apparatus under high voltage conditions was assessed by performing power frequency and lightning impulse tests. In the second experiment, a low voltage test was conducted during which voltages of different frequencies and pulses with varying rise times were applied. A finite element simulation was also carried out for comparison and further investigation

Development of gas sensing technology for ground and airborne applications powered by solar energy : methodology and experimental results

Monitoring gases for environmental, industrial and agricultural fields is a demanding task that requires long periods of observation, large quantity of sensors, data management, high temporal and spatial resolution, long term stability, recalibration procedures, computational resources, and energy availability. Wireless Sensor Networks (WSNs) and Unmanned Aerial Vehicles (UAVs) are currently representing the best alternative to monitor large, remote, and difficult access areas, as these technologies have the possibility of carrying specialised gas sensing systems, and offer the possibility of geo-located and time stamp samples. However, these technologies are not fully functional for scientific and commercial applications as their development and availability is limited by a number of factors: the cost of sensors required to cover large areas, their stability over long periods, their power consumption, and the weight of the system to be used on small UAVs. Energy availability is a serious challenge when WSN are deployed in remote areas with difficult access to the grid, while small UAVs are limited by the energy in their reservoir tank or batteries. Another important challenge is the management of data produced by the sensor nodes, requiring large amount of resources to be stored, analysed and displayed after long periods of operation. In response to these challenges, this research proposes the following solutions aiming to improve the availability and development of these technologies for gas sensing monitoring: first, the integration of WSNs and UAVs for environmental gas sensing in order to monitor large volumes at ground and aerial levels with a minimum of sensor nodes for an effective 3D monitoring; second, the use of solar energy as a main power source to allow continuous monitoring; and lastly, the creation of a data management platform to store, analyse and share the information with operators and external users. The principal outcomes of this research are the creation of a gas sensing system suitable for monitoring any kind of gas, which has been installed and tested on CH4 and CO2 in a sensor network (WSN) and on a UAV. The use of the same gas sensing system in a WSN and a UAV reduces significantly the complexity and cost of the application as it allows: a) the standardisation of the signal acquisition and data processing, thereby reducing the required computational resources; b) the standardisation of calibration and operational procedures, reducing systematic errors and complexity; c) the reduction of the weight and energy consumption, leading to an improved power management and weight balance in the case of UAVs; d) the simplification of the sensor node architecture, which is easily replicated in all the nodes. I evaluated two different sensor modules by laboratory, bench, and field tests: a non-dispersive infrared module (NDIR) and a metal-oxide resistive nano-sensor module (MOX nano-sensor). The tests revealed advantages and disadvantages of the two modules when used for static nodes at the ground level and mobile nodes on-board a UAV. Commercial NDIR modules for CO2 have been successfully tested and evaluated in the WSN and on board of the UAV. Their advantage is the precision and stability, but their application is limited to a few gases. The advantages of the MOX nano-sensors are the small size, low weight, low power consumption and their sensitivity to a broad range of gases. However, selectivity is still a concern that needs to be addressed with further studies. An electronic board to interface sensors in a large range of resistivity was successfully designed, created and adapted to operate on ground nodes and on-board UAV. The WSN and UAV created were powered with solar energy in order to facilitate outdoor deployment, data collection and continuous monitoring over large and remote volumes. The gas sensing, solar power, transmission and data management systems of the WSN and UAV were fully evaluated by laboratory, bench and field testing. The methodology created to design, developed, integrate and test these systems was extensively described and experimentally validated. The sampling and transmission capabilities of the WSN and UAV were successfully tested in an emulated mission involving the detection and measurement of CO2 concentrations in a field coming from a contaminant source; the data collected during the mission was transmitted in real time to a central node for data analysis and 3D mapping of the target gas. The major outcome of this research is the accomplishment of the first flight mission, never reported before in the literature, of a solar powered UAV equipped with a CO2 sensing system in conjunction with a network of ground sensor nodes for an effective 3D monitoring of the target gas. A data management platform was created using an external internet server, which manages, stores, and shares the data collected in two web pages, showing statistics and static graph images for internal and external users as requested. The system was bench tested with real data produced by the sensor nodes and the architecture of the platform was widely described and illustrated in order to provide guidance and support on how to replicate the system. In conclusion, the overall results of the project provide guidance on how to create a gas sensing system integrating WSNs and UAVs, how to power the system with solar energy and manage the data produced by the sensor nodes. This system can be used in a wide range of outdoor applications, especially in agriculture, bushfires, mining studies, zoology, and botanical studies opening the way to an ubiquitous low cost environmental monitoring, which may help to decrease our carbon footprint and to improve the health of the planet.

Poly(2,5-bis(2-octyldodecyl)-3,6-di(furan-2-yl)-2,5-dihydro-pyrrolo[3,4-c] pyrrole-1,4-dione-co-thieno[3,2-b]thiophene): A high performance polymer semiconductor for both organic thin film transistors and organic photovoltaics

A new diketopyrrolopyrrole (DPP)-containing donor-acceptor polymer, poly(2,5-bis(2-octyldodecyl)-3,6-di(furan-2-yl)-2,5-dihydro-pyrrolo[3,4-c] pyrrole-1,4-dione-co-thieno[3,2-b]thiophene) (PDBF-co-TT), is synthesized and studied as a semiconductor in organic thin film transistors (OTFTs) and organic photovoltaics (OPVs). High hole mobility of up to 0.53 cm 2 V -1 s -1 in bottom-gate, top-contact OTFT devices is achieved owing to the ordered polymer chain packing and favoured chain orientation, strong intermolecular interactions, as well as uniform film morphology of PDBF-co-TT. The optimum band gap of 1.39 eV and high hole mobility make this polymer a promising donor semiconductor for the solar cell application. When paired with a fullerene acceptor, PC 71BM, the resulting OPV devices show a high power conversion efficiency of up to 4.38% under simulated standard AM1.5 solar illumination.

Chinese economic development and the environment

Over the past two decades, China has become an economic powerhouse. However, as the world’s largest producer of CO2 emissions, the scale and seriousness of China’s environmental problems are clearly evident. This pioneering book provides an economic analysis of the significant environmental and energy problems facing China in the 21st century.

Towards understanding self-development coaching programs

Self-development resources are a popular billion -dollar industry worldwide used to improve individuals quality of lives. However, there are insufficient studies for a contemporary conceptualization, especially when it comes to live self-development programs. This paper provides a literature review about current self-development definitions, ideology, concepts, and themes; quality of material provided; quality and characteristics of self-development providers; and the features of the participants who seek such programs. The paper will also discuss the relationsh ip between self-development and related disciplines including coaching, training, mentoring, and motivational speaking. Finally, a new definition will be proposed for self-development coaching programs. Gaps of knowledge are highlighted for further research.

The ethics, aesthetics and practical politics of ownership in co-creative media

What is ‘best practice’ when it comes to managing intellectual property rights in participatory media content? As commercial media and entertainment business models have increasingly come to rely upon the networked productivity of end-users (Banks and Humphreys 2008) this question has been framed as a problem of creative labour made all the more precarious by changing employment patterns and work cultures of knowledge-intensive societies and globalising economies (Banks, Gill and Taylor 2014). This paper considers how the problems of ownership are addressed in non-commercial, community-based arts and media contexts. Problems of labour are also manifest in these contexts (for example, reliance on volunteer labour and uncertain economic reward for creative excellence). Nonetheless, managing intellectual property rights in collaborative creative works that are created in community media and arts contexts is no less challenging or complex than in commercial contexts. This paper takes as its focus a particular participatory media practice known as ‘digital storytelling’. The digital storytelling method, formalised by the Centre for Digital Storytelling (CDS) from the mid-1990s, has been internationally adopted and adapted for use in an open-ended variety of community arts, education, health and allied services settings (Hartley and McWilliam 2009; Lambert 2013; Lundby 2008; Thumin 2012). It provides a useful point of departure for thinking about a range of collaborative media production practices that seek to address participation ‘gaps’ (Jenkins 2006). However the outputs of these activities, including digital stories, cannot be fully understood or accurately described as user-generated content. For this reason, digital storytelling is taken here to belong to a category of participatory media activity that has been described as ‘co-creative’ media (Spurgeon 2013) in order to improve understanding of the conditions of mediated and mediatized participation (Couldry 2008). This paper reports on a survey of the actual copyrighting practices of cultural institutions and community-based media arts practitioners that work with digital storytelling and similar participatory content creation methods. This survey finds that although there is a preference for Creative Commons licensing a great variety of approaches are taken to managing intellectual property rights in co-creative media. These range from the use of Creative Commons licences (for example, Lambert 2013, p.193) to retention of full copyrights by storytellers, to retention of certain rights by facilitating organisations (for example, broadcast rights by community radio stations and public service broadcasters), and a range of other shared rights arrangements between professional creative practitioners, the individual storytellers and communities with which they collaborate, media outlets, exhibitors and funders. This paper also considers how aesthetic and ethical considerations shape responses to questions of intellectual property rights in community media arts contexts. For example, embedded in the CDS digital storytelling method is ‘a critique of power and the numerous ways that rank is unconsciously expressed in engagements between classes, races and gender’ (Lambert 117). The CDS method privileges the interests of the storyteller and, through a transformative workshop process, aims to generate original individual stories that, in turn, reflect self-awareness of ‘how much the way we live is scripted by history, by social and cultural norms, by our own unique journey through a contradictory, and at times hostile, world’ (Lambert 118). Such a critical approach is characteristic of co-creative media practices. It extends to a heightened awareness of the risks of ‘story theft’ and the challenges of ownership and informs ideas of ‘best practice’ amongst creative practitioners, teaching artists and community media producers, along with commitments to achieving equitable solutions for all participants in co-creative media practice (for example, Lyons-Reid and Kuddell nd.). Yet, there is surprisingly little written about the challenges of managing intellectual property produced in co-creative media activities. A dialogic sense of ownership in stories has been identified as an indicator of successful digital storytelling practice (Hayes and Matusov 2005) and is helpful to grounding the more abstract claims of empowerment for social participation that are associated with co-creative methods. Contrary to the ‘change from below’ philosophy that underpins much thinking about co-creative media, however, discussions of intellectual property usually focus on how methods such as digital storytelling contribute to the formation of copyright law-compliant subjects, particularly when used in educational settings (for example, Ohler nd.). This also exposes the reliance of co-creative methods on the creative assets storytellers (rather than on the copyrighted materials of the media cultures of storytellers) as a pragmatic response to the constraints that intellectual property right laws impose on the entire category of participatory media. At the level of practical politics, it also becomes apparent that co-creative media practitioners and storytellers located in copyright jurisdictions governed by ‘fair use’ principles have much greater creative flexibility than those located in jurisdictions governed by ‘fair dealing’ principles.

Co-branding strategies for luxury fashion brands : Missoni for Target

Missoni is a luxury Italian knitwear brand that partnered with Target in September 2011 releasing a large, one off, mass-market collection that ranged from apparel to home wares. The collaboration received extensive media coverage and was consequently extremely sought after. The online sales site crashed within hours of opening while shelves were cleared in stores minutes after trading began. Within hours more than 40000 items from the collection were posted for sale online at greatly inflated prices. Evaluation of the case study revealed that sales of the Missoni collection increased following the collaboration and the value of the publicity generated at estimated US$100 million. The lack of available stock, despite the enormous hype created, reinforced Missoni’s luxury image. Missoni was able to gain massive awareness of the brand despite not employing any of its own communication channels in the promotion of the collaboration. However the co-branded collaboration was distinctively Missoni, potentially inciting comparison and confusion with the signature line. Nevertheless, this study shows that co-branding strategies can offer a viable opportunity for luxury brands to increase their market share, while they maintain their market position.

Choosing an appropriate modelling framework for analysing multispecies co-culture cell biology experiments

In vitro cell biology assays play a crucial role in informing our understanding of the migratory, proliferative and invasive properties of many cell types in different biological contexts. While mono-culture assays involve the study of a population of cells composed of a single cell type, co-culture assays study a population of cells composed of multiple cell types (or subpopulations of cells). Such co-culture assays can provide more realistic insights into many biological processes including tissue repair, tissue regeneration and malignant spreading. Typically, system parameters, such as motility and proliferation rates, are estimated by calibrating a mathematical or computational model to the observed experimental data. However, parameter estimates can be highly sensitive to the choice of model and modelling framework. This observation motivates us to consider the fundamental question of how we can best choose a model to facilitate accurate parameter estimation for a particular assay. In this work we describe three mathematical models of mono-culture and co-culture assays that include different levels of spatial detail. We study various spatial summary statistics to explore if they can be used to distinguish between the suitability of each model over a range of parameter space. Our results for mono-culture experiments are promising, in that we suggest two spatial statistics that can be used to direct model choice. However, co-culture experiments are far more challenging: we show that these same spatial statistics which provide useful insight into mono-culture systems are insuffcient for co-culture systems. Therefore, we conclude that great care ought to be exercised when estimating the parameters of co-culture assays.