Spectrally Tuned Lanthanide Photoluminescence for Point-of-Care Testing

Point-of-care (POC) –diagnostics is a field with rapidly growing market share. As these applications become more widely used, there is an increasing pressure to improve their performance to match the one of a central laboratory tests. Lanthanide luminescence has been widely utilized in diagnostics because of the numerous advantages gained by the utilization of time-resolved or anti-Stokes detection. So far the use of lanthanide labels in POC has been scarce due to limitations set by the instrumentation required for their detection and the shortcomings, e.g. low brightness, of these labels. Along with the advances in the research of lanthanide luminescence, and in the field of semiconductors, these materials are becoming a feasible alternative for the signal generation also in the future POC assays. The aim of this thesis was to explore ways of utilizing time-resolved detection or anti-Stokes detection in POC applications. The long-lived fluorescence for the time-resolved measurement can be produced with lanthanide chelates. The ultraviolet (UV) excitation required by these chelates is cumbersome to produce with POC compatible fluorescence readers. In this thesis the use of a novel light-harvesting ligand was studied. This molecule can be used to excite Eu(III)-ions at wavelengths extending up to visible part of the spectrum. An enhancement solution based on this ligand showed a good performance in a proof-of-concept -bioaffinity assay and produced a bright signal upon 365 nm excitation thanks to the high molar absorptivity of the chelate. These features are crucial when developing miniaturized readers for the time-resolved detection of fluorescence. Upconverting phosphors (UCPs) were studied as an internal light source in glucose-sensing dry chemistry test strips and ways of utilizing their various emission wavelengths and near-infrared excitation were explored. The use of nanosized NaYF :Yb3+,Tm3+-particles enabled the replacement of an external UV-light source with a NIR-laser and gave an additional degree of freedom in the optical setup of the detector instrument. The new method enabled a blood glucose measurement with results comparable to a current standard method of measuring reflectance. Microsized visible emitting UCPs were used in a similar manner, but with a broad absorbing indicator compound filtering the excitation and emission wavelengths of the UCP. This approach resulted in a novel way of benefitting from the non-linear relationship between the excitation power and emission intensity of the UCPs, and enabled the amplification of the signal response from the indicator dye.

The role of import intermediary companies in the Russian imports from the EU A case study of a Russian industrial company’s point of view on import intermediaries

The literature on agency suggests different implications for the use of export intermediaries. However, only few studies provide a view on import intermediaries. This thesis tries for its part to fill this research gap by studying the import intermediaries in the EU–Russia trade from a Russian industrial company’s point of view. The aim is to describe import intermediation and explain the need for import intermediary companies in the EU–Russia trade. The theoretical framework of this thesis originates from an article by Peng and York (2001), in which they study the performance of export intermediaries. This thesis applies resource-based theory, transaction cost theory and agency cost theory, following the idea of Peng and York. The resource-based theory approach is utilised for describing an ideal import intermediary company, and transaction cost theory provides a basis for understanding the benefits of using the services of import intermediary companies, while agency cost theory is applied in order to understand the risks the Russian industrial company faces when it decides to use the services of import intermediaries. The study is performed in the form of a case interview with a representative of a major Russian metallurgy company. The results of the study suggest that an ideal intermediary has the skills required specifically for the imports process, in order to save time and money of the principal company. The intermediary company helps reducing the amount of time the managers and the staff of the principal company use to make imports possible, thus reducing the salary costs and providing the possibility to concentrate on the company’s core competencies. The benefits of using the services of import intermediary companies are the reduced transaction costs, especially salary costs that are minimised because of the effectiveness and specialisation of import intermediaries. Intermediaries are specialised in the imports process and thus need less time and resources to organise the imports. They also help to reduce the fixed salary costs, because their services can be used only when needed. The risks of being misled by intermediaries are minimised by the competition on the import intermediary market. In case an intermediary attempts fraud, it gets replaced by its rival.

Effect of the implementation of the Hazard Analysis Critical Control Point (HACCP) prerequisite program in an institutional foodservice unit in Southern Brazil

The aims of this study were to investigate the hygienic practices in the food production of an institutional foodservice unit in Southern Brazil and to evaluate the effect of implementing good food handling practices and standard operational procedures using microbiological hygiene indicators. An initial survey of the general operating conditions classified the unit as regular in terms of compliance with State safety guidelines for food service establishments. An action plan that incorporated the correction of noncompliance issues and the training of food handlers in good food handling practices and standard operational procedures were then implemented. The results of the microbiological analysis of utensils, preparation surfaces, food handlers' hands, water, and ambient air were recorded before and after the implementation of the action plan. The results showed that the implementation of this type of practice leads to the production of safer foods.

Hygienic-sanitary working practices and implementation of a Hazard Analysis and Critical Control Point (HACCP) plan in lobster processing industries

This study aimed to verify the hygienic-sanitary working practices and to create and implement a Hazard Analysis Critical Control Point (HACCP) in two lobster processing industries in Pernambuco State, Brazil. The industries studied process frozen whole lobsters, frozen whole cooked lobsters, and frozen lobster tails for exportation. The application of the hygienic-sanitary checklist in the industries analyzed achieved conformity rates over 96% to the aspects evaluated. The use of the Hazard Analysis Critical Control Point (HACCP) plan resulted in the detection of two critical control points (CCPs) including the receiving and classification steps in the processing of frozen lobster and frozen lobster tails, and an additional critical control point (CCP) was detected during the cooking step of processing of the whole frozen cooked lobster. The proper implementation of the Hazard Analysis Critical Control Point (HACCP) plan in the lobster processing industries studied proved to be the safest and most cost-effective method to monitor each critical control point (CCP) hazards.

Production of magnesium carbonates from serpentinites for CO2 mineral sequestration : optimisation towards industrial application

Global warming is one of the most alarming problems of this century. Initial scepticism concerning its validity is currently dwarfed by the intensification of extreme weather events whilst the gradual arising level of anthropogenic CO2 is pointed out as its main driver. Most of the greenhouse gas (GHG) emissions come from large point sources (heat and power production and industrial processes) and the continued use of fossil fuels requires quick and effective measures to meet the world’s energy demand whilst (at least) stabilizing CO2 atmospheric levels. The framework known as Carbon Capture and Storage (CCS) – or Carbon Capture Utilization and Storage (CCUS) – comprises a portfolio of technologies applicable to large‐scale GHG sources for preventing CO2 from entering the atmosphere. Amongst them, CO2 capture and mineralisation (CCM) presents the highest potential for CO2 sequestration as the predicted carbon storage capacity (as mineral carbonates) far exceeds the estimated levels of the worldwide identified fossil fuel reserves. The work presented in this thesis aims at taking a step forward to the deployment of an energy/cost effective process for simultaneous capture and storage of CO2 in the form of thermodynamically stable and environmentally friendly solid carbonates. R&D work on the process considered here began in 2007 at Åbo Akademi University in Finland. It involves the processing of magnesium silicate minerals with recyclable ammonium salts for extraction of magnesium at ambient pressure and 400‐440⁰C, followed by aqueous precipitation of magnesium in the form of hydroxide, Mg(OH)2, and finally Mg(OH)2 carbonation in a pressurised fluidized bed reactor at ~510⁰C and ~20 bar PCO2 to produce high purity MgCO3. Rock material taken from the Hitura nickel mine, Finland, and serpentinite collected from Bragança, Portugal, were tested for magnesium extraction with both ammonium sulphate and bisulphate (AS and ABS) for determination of optimal operation parameters, primarily: reaction time, reactor type and presence of moisture. Typical efficiencies range from 50 to 80% of magnesium extraction at 350‐450⁰C. In general ABS performs better than AS showing comparable efficiencies at lower temperature and reaction times. The best experimental results so far obtained include 80% magnesium extraction with ABS at 450⁰C in a laboratory scale rotary kiln and 70% Mg(OH)2 carbonation in the PFB at 500⁰C, 20 bar CO2 pressure for 15 minutes. The extraction reaction with ammonium salts is not at all selective towards magnesium. Other elements like iron, nickel, chromium, copper, etc., are also co‐extracted. Their separation, recovery and valorisation are addressed as well and found to be of great importance. The assessment of the exergetic performance of the process was carried out using Aspen Plus® software and pinch analysis technology. The choice of fluxing agent and its recovery method have a decisive sway in the performance of the process: AS is recovered by crystallisation and in general the whole process requires more exergy (2.48–5.09 GJ/tCO2sequestered) than ABS (2.48–4.47 GJ/tCO2sequestered) when ABS is recovered by thermal decomposition. However, the corrosive nature of molten ABS and operational problems inherent to thermal regeneration of ABS prohibit this route. Regeneration of ABS through addition of H2SO4 to AS (followed by crystallisation) results in an overall negative exergy balance (mainly at the expense of low grade heat) but will flood the system with sulphates. Although the ÅA route is still energy intensive, its performance is comparable to conventional CO2 capture methods using alkanolamine solvents. An energy‐neutral process is dependent on the availability and quality of nearby waste heat and economic viability might be achieved with: magnesium extraction and carbonation levels ≥ 90%, the processing of CO2‐containing flue gases (eliminating the expensive capture step) and production of marketable products.

Biomarkkerit sepsiksen diagnostiikassa sekä Kvantitatiivisen prokalsitoniini-immunomäärityksen pystyttäminen ja optimointi point-of-care-ympäristöön

Termiä sepsis käytetään infektion aiheuttamasta yleisestä tulehdusreaktio-oireyhtymästä. Biokemiallinen merkkiaine eli biomarkkeri on aine, joka objektiivisesti mitattuna ja arvioituna toimii indikaattorina erottaen toisistaan normaalit biologiset prosessit ja patogeeniset prosessit. Lisäksi biomarkkeri saattaa osoittaa farmakologisen vasteen lääkehoidolle. Tutkielman kirjallisessa osassa on esitelty ja verrattu toisiinsa jo kliinisessä käytössä olevia sekä lupaavia, vielä tutkimusvaiheessa olevia, sepsiksen biomerkkiaineita. Lisäksi tutkielmassa on tarkasteltu sepsiksen todentamisen, tunnistamisen ja hoidon tulevaisuudennäkymiä. Prokalsitoniini (PCT) on eräs jo kliinisessä käytössä oleva sepsiksen biomerkkiaine. Tutkielman kokeellisessa osassa pystytettiin teho-osastoille suunnattu pikatesti PCT:n mittaamiseen aikaerotteista fluoresenssiteknologiaa hyödyntävälle AQT-järjestelmälle (DHR Finland Oy, Innotrac Diagnostics, Suomi). Järjestelmä mittaa 20–30 minuutissa biomerkkiainepitoisuuden. Tavoitteena oli löytää sopiva vasta-ainepari ja pystyttää kaksipuoleinen immunomääritys, jonka analyyttinen herkkyys on alle 0,02 ng/ml:ssa. Työssä tutkittiin biotinyloidun kokonaisen vasta-aineen ja paikkaspesifisesti biotinyloidun antigeenia sitovan fragmentin (engl. fragment antigen binding, Fab) toimivuutta sitojamolekyylinä. Lisäksi työssä verrattiin kahden eri leimamolekyylin, 9 hampaisen europiumkelaatin sekä Innotracissa kehitetyn tähtikelaatin, toimivuutta PCT-immunomäärityksessä. Vasta-aineiden mahdolliset ristireaktiot testattiin ja määritystä testattiin alustavasti eri näytematriiseissa. Työssä löydettiin 5 vasta-aineparia, joiden analyyttinen herkkyys oli alle 0,02 ng/ml:ssa. Aiemmin testattuja vasta-ainepareja parempi analyyttinen herkkyys johtui todennäköisesti yhden uuden leimavasta-aineen paremmasta affiniteetistä. Tähtikelaatilla leimatulla vasta-aineella analyyttinen herkkyys parani lähes viisinkertaisesti, kun sitä verrattiin 9-hampaisella euroopiumkelaatilla leimatun vasta-aineen määritykseen. Havaittiin myös, että Fab-fragmentilla mitattiin määrityksissä lähes kaksi kertaa suuremmat signaali-taustasuhteet, kun sitä verrattiin kokonaiseen vasta-aineeseen, tietyllä vasta-aineparilla. Tämä johtui luultavasti steeristen esteiden vähenemisestä. Näytematriisilla ei todettu olevan vaikutusta määritykseen, eikä ristireaktioita havaittu. Kehitetyn määrityksen suoriutumista verrattiin markkinoilla olevaan BRAHMS AG:n (Saksa) PCT-määritykseen käyttäen potilasnäytteitä. Korrelaatiokertoimet potilasnäytevertailuissa olivat 0,965–0,989 ja näytteiden mitatuissa pitoisuuksissa oli tasoero.

The role of import intermediary companies in the Russian imports from the EU A case study of a Russian industrial company’s point of view on import intermediaries

The literature on agency suggests different implications for the use of export intermediaries. However, only few studies provide a view on import intermediaries. This thesis tries for its part to fill this research gap by studying the import intermediaries in the EU–Russia trade from a Russian industrial company’s point of view. The aim is to describe import intermediation and explain the need for import intermediary companies in the EU–Russia trade. The theoretical framework of this thesis originates from an article by Peng and York (2001), in which they study the performance of export intermediaries. This thesis applies resource-based theory, transaction cost theory and agency cost theory, following the idea of Peng and York. The resource-based theory approach is utilised for describing an ideal import intermediary company, and transaction cost theory provides a basis for understanding the benefits of using the services of import intermediary companies, while agency cost theory is applied in order to understand the risks the Russian industrial company faces when it decides to use the services of import intermediaries. The study is performed in the form of a case interview with a representative of a major Russian metallurgy company. The results of the study suggest that an ideal intermediary has the skills required specifically for the imports process, in order to save time and money of the principal company. The intermediary company helps reducing the amount of time the managers and the staff of the principal company use to make imports possible, thus reducing the salary costs and providing the possibility to concentrate on the company’s core competencies. The benefits of using the services of import intermediary companies are the reduced transaction costs, especially salary costs that are minimised because of the effectiveness and specialisation of import intermediaries. Intermediaries are specialised in the imports process and thus need less time and resources to organise the imports. They also help to reduce the fixed salary costs, because their services can be used only when needed. The risks of being misled by intermediaries are minimised by the competition on the import intermediary market. In case an intermediary attempts fraud, it gets replaced by its rival.

ATTITUDES TOWARD RUSSIAN CUSTOMERS IN THE FINNISH RETAIL TRADE SECTOR – A salesperson’s point of view

The amount of Russian tourists in Finland has increased significantly in the past years. The impact of Russian tourism to the Finnish retail trade sector is enormous, since Russian tourists often spend a lot of money particularly on shopping. Shopping tourism is mainly focused in the near border cities, such as Imatra and Lappeenranta, and in addition in Helsinki metropolitan area. The purpose of this study is to map the attitudes and perceptions of the sales personnel who are working in the Finnish retail trade sector towards Russian customers and to discover which elements affect these attitudes. The theories in this study are based on cultural elements and elements related to sales behavior and performance. Cultural differences between Finland and Russia, cultural distance and cultural intelligence form the cultural aspect of this study. Customer orientation vs. sales orientation (SOCO), adaptive selling, selling skills and job competency, salesperson’s affect and empathy toward customers, and job autonomy form the elements concerning sales behavior and performance. Furthermore, the attitude – behavior link, based on social psychology is addressed. A survey was conducted in two retail trade chains operating in Finland. These retail companies have stores and department stores in different geographical areas in Finland and the survey was conducted in altogether 19 cities. In addition to the theories that were discussed, two expert interviews were conducted in order to get a deeper understanding of the phenomenon at hand. Moreover the interviews helped in the formulation of the hypotheses and the questionnaire design. The questionnaires were sent directly to the stores, where they were placed so that they were available for the sales personnel. Altogether 487 usable responses were collected. The returned questionnaires were analyzed with IBM SPSS 21 statistics program. The results of this study indicated that the attitudes toward Russian customers are more negative compared to other foreign customers. However, the respondents’ attitudes toward and perceptions of Russian customers varied a lot. From the background variables age, education level, length of employment in current workplace, and length of experience in customer service had an effect on the attitudes of the respondents. In addition, the perceptions of Russian customers were more positive in the Eastern Finland compared to Helsinki metropolitan area. The cultural elements; cultural knowledge, cultural distance and cultural intelligence all affected the attitudes of the respondents. From the elements related to sales behavior and performance customer orientation, salesperson’s affect and empathy toward customers, and perceived job autonomy had an effect on the attitudes

Arrêt du conseil d'Etat du roi qui ordonne que les instances sur le fait des Aides, seront portées aux élections et par appel en la cour des Aides et que les secrétaires du roi et leurs veuves ne jouiront point des entrées et détail des dits droits d'aides ailleurs qu'à Paris

[Acte. 1716-03-17. Paris]