Rotary peeling yield of Schizolobium amazonicum (Leguminosae - Caesalpinioideae)

The tropical tree Schizolobium amazonicum is native from the Amazonian forest, naturally occurring in Brazil, Peru and Colombia. This work aimed to study the veneer yield made from this species. For this purpose, 50 logs from S. amazonicum were rotary peeled in a plywood industry installed in Brazilian Amazon region. The results indicated that S. amazonicum had a peeling yield similar or even higher than those usually obtained for species traditionally used for this purpose in Brazil, like those of Pinus and Eucalyptus. It was also observed that the dendrometric parameters of the log can be used to estimate the peeling yield in this species.

Harvest managements and cultural practices in sugarcane

The presence of trash from the mechanical harvest of green cane on sugarcane plantations promotes changes in the agricultural management, for example, in the mechanical cultural practices of ratoon cane in-between the rows and nitrogen (N) fertilization. The goal of this study was to evaluate the performance of sugarcane in different harvest systems, associated to the mechanical cultural practices in interrows and N rates. The study was carried out on a sugarcane plantation in Sales Oliveira, São Paulo, Brazil, with the sugarcane variety SP81-3250, on soil classified as Acrudox, in a randomized block design with split-split plots and four replications. The main treatments consisted of harvest systems (harvesting green cane or burnt cane), the secondary treatment consisted of the mechanical cultural practices in the interrows and the tertiary treatments were N rates (0, 30, 60, 90, 120 and 160 kg ha-1), using ammonium nitrate (33 % N) as N source. The harvest systems did not differ in sugarcane yield (tons of cane per hectare - TCH), but in burnt cane, the pol percent and total sugar recovery (TSR) were higher. This could be explained by the higher quantity of plant impurities in the harvested raw material in the system without burning, which reduces the processing quality. Mechanical cultural practices in the interrows after harvest had no effect on cane yield and sugar quality, indicating that this operation can be omitted in areas with mechanical harvesting. The application of N fertilizer at rates of 88 and 144 kg ha-1 N, respectively, increased stalk height and TCH quadratically to the highest values for these variables. For the sugar yield per hectare (in pol %), N fertilization induced a linear increase.

Relação entre a precipitação anual e o incremento em volume de árvores amostradas em plantações de Pinus taeda

This work was based on a complete tree stem analysis to assess the growth behavior and current annual volume increment (CAI) of four individuals of Pinus taeda sampled in populations located in the 'Avare II' State Forest and 'Itapeva' Experimental Station, State of São Paulo. The relationship between the rainfall time series and CAI index was examined by means of cross-correlation coefficients. The convergence coefficients (GL) between the series were calculated. In the individuals that showed a statistical significance in the cross-correlation between the time series, the previous year's rainfall significantly affected the current annual volume increment in the year under consideration. The GL values between the series were higher in 'Itapeva'. Since the two sites showed no significant difference in rainfall distribution, the difference was attributed to the soil texture at 40-60 cm - medium in 'Avare' and clayey in 'Itapeva', so the CAI of the 'Itapeva' plantation reflects the higher availability of water.

Alterações morfoanatômicas foliares da cana-de-açúcar na fase de estabelecimento em condições de matocompetição

Aiming at the assessment of the production parameters and leaf tissues morph anatomical possible changes of the sugar cane RB 86 7515 variety in its establishment phase in the conditions of weed competition, a study over vases has been accomplished in the city of Dracena, São Paulo State, from April to June, 2010, at Universidade Estadual Paulista Júlio de Mesquita Filho. The species Brachiaria brizantha e Brachiaria decumbens, which are regarded as invaders, were used. It was also used the Completely Randomized Design with seven treatments and five repetitions, totalizing 35 lots or vases. The treatments ranged according to the number of Brachiaria brizantha and Brachiaria decumbens seeds, as it follows: T1 - no occurrence of weed competition; T2 - low occurrence of weed competition with Brachiaria brizantha; T3 - medium occurrence of weed competition with Brachiaria brizantha; T4 - high occurrence of weed competition with Brachiaria brizantha; T5 - low occurrence of weed competition with Brachiaria decumbens; T6 - medium occurrence of weed competition with Brachiaria decumbens, and T7 - high occurrence of weed competition with Brachiaria decumbens. There was an evaluation over the following issues after 60 days of the sugar cane plantation and the invading plants: the weight of the total dry matter of the plants, the thickness of the upper surface epidermis or adaxial, the thickness of the lower surface or abaxial, the thickness of the mesophill, the thickness of the limbo, the diameter of the xylematic vessels and the diameter of the phloem vessels. The weed competition of the species Brachiaria brizantha e Brachiaria decumbens, which are considered as invaders, provoked some reduction of the morph anatomical characteristics and of the sugar cane production. In general, the Brachiaria decumbens was the species which mostly influenced the leaf thickness of the sugar cane in negative aspects.

Usos do solo na reforma do canavial: atributos físicos de latossolos, produtividade e qualidade da cana-de-açúcar no 3° corte

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Kricagem indicativa para elaboração de mapas probabilístico em agricultura de precisão

Pós-graduação em Biometria - IBB

Desenvolvimento de biossensor baseado em extrato de açaí e sensor biomimético para detecção de hexazinona

Pós-graduação em Química - IQ

Interferência de sistemas de manejo na floresta nacional de Caxiuanã, PA nos atributos físicos e químicos na composição isotópica de solo antropizado

Pós-graduação em Agronomia (Agricultura) - FCA

Thermochemical equilibrium modeling of a biomass downdraft gasifier: Constrained and unconstrained non-stoichiometric models

The objective of this work is to develop a non-stoichiometric equilibrium model to study parameter effects in the gasification process of a feedstock in downdraft gasifiers. The non-stoichiometric equilibrium model is also known as the Gibbs free energy minimization method. Four models were developed and tested. First a pure non-stoichiometric equilibrium model called M1 was developed; then the methane content was constrained by correlating experimental data and generating the model M2. A kinetic constraint that determines the apparent gasification rate was considered for model M3 and finally the two aforementioned constraints were implemented together in model M4. Models M2 and M4 showed to be the more accurate among the four developed models with mean RMS (root mean square error) values of 1.25 each.Also the gasification of Brazilian Pinus elliottii in a downdraft gasifier with air as gasification agent was studied. The input parameters considered were: (a) equivalence ratio (0.28-035); (b) moisture content (5-20%); (c) gasification time (30-120 min) and carbon conversion efficiency (80-100%). (C) 2014 Elsevier Ltd. All rights reserved.

Thermochemical equilibrium modeling of biomass downdraft gasifier: Stoichiometric models

The aim of this work is to develop stoichiometric equilibrium models that permit the study of parameters effect in the gasification process of a particular feedstock. In total four models were tested in order to determine the syngas composition. One of these four models, called M2, was based on the theoretical equilibrium constants modified by two correction factors determined using published experimental data. The other two models, M3 and M4 were based in correlations, while model M4 was based in correlations to determine the equilibrium constants, model M3 was based in correlations that relate the H-2, CO and CO2 content on the synthesis gas. Model M2 proved to be the more accurate and versatile among these four models, and also showed better results than some previously published models. Also a case study for the gasification of a blend of hardwood chips and glycerol at 80% and 20% respectively, was performed considering equivalence ratios form 0.3 to 0.5, moisture contents from 0%-20% and oxygen percentages in the gasification agent of 100%, 60% and 21%. (C) 2013 Elsevier Ltd. All rights reserved.

Mechanical and Thermal Properties of Thermoplastic Random Copolyesters Made from Lipid- Derived Medium and Long Chain Poly (x-hydroxyfatty acid) s

The physical properties of novel thermoplastic random copolyesters [-(CH2)(n)-COO-/-(CH2)(n)-COO-](x) made of long (n=12) and medium (n=8) chain length -hydroxyfatty esters [HO-(CH2)(n)-COOCH3] derived from bio-based vegetable oil feedstock are described. Poly(-hydroxy tridecanoate/-hydroxy nonanoate) P(-Me13-/-Me9-) random copolyesters (M-n=11,000-18,500 g/mol) with varying molar ratios were examined by TGA, DSC, DMA and tensile analysis, and WAXD. For the whole range of P(-Me13-/-Me9-) compositions, the WAXD data indicated an orthorhombic polyethylene-like crystal packing. Their melting characteristics, determined by DSC, varied with composition suggesting an isomorphic cocrystallization behavior. TGA of the P(-Me13-/-Me9-)s indicated improved thermal stability determined by their molar compositions. The glass transition temperature, investigated by DMA, was also found to vary with composition. The crystallinities of P(-Me13-/-Me9-)s however, were unaffected by the composition. The stiffness (Young's modulus) of these materials was found to be related to their degrees of crystallinity. (c) 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 40492.

Produtividade da cana-de-açúcar e definição de zonas específicas de manejo do solo

The correct spatial intervention in the administration of the plantation, arising from specific areas of soil mapping, can increase your productivity as well as profitability and yields in agriculture. The spatial and Pearson's relationships between sugarcane attributes and chemical attributes of a Typic Tropustalf were studied in the growing season of 2010, in Suzanapolis, State of Sao Paulo, Brazil (20 degrees 27'33 '' S lat.; 51 degrees 08'05 '' W long.), in order to obtain the attributes that had the best sugarcane productivity relationship. To this end, a geostatistical grid containing 118 sample points was installed for soil and plant data collection in an area of 10.5 ha with the third crop cut. The productivity of sugarcane (PRO) represented the attribute of the plant, while the attributes of the soil were: K+, Ca+2, Mg+2 and organic matter at depths of 0-0.20 m and 0.20-0.40 m. Relationships were calculated between the PRO and the attributes of the soil. Semivariograms were adjusted for all attributes, obtaining the respective krigings and the cross-validations. It was also made the cokrigings between the PRO and the soil attributes. The levels of the soil organic matter, for their evident substantial correlations, Sperman's Rho and spatial, with the productivity of sugarcane, are indicators of two specific areas of soil management strongly associated with the productivity of sugarcane. In such zones this productivity varies between 75.8-94.7 t ha(-1) and 101.0-119.9 t ha(-1), when the levels of organic matter respectively are 12.7-14.5 g dm(-3) (0-0.20 m) and 11.8-12.8 g dm(-3) (0.20-0.40 m).

Effects of potassium and sodium supply on drought-adaptive mechanisms in Eucalyptus grandis plantations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Properties of juvenile and mature woods of Hevea brasiliensis untapped and with tapping panels

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização física de painéis aglomerados de Eucalyptus grandis com adição de resíduos industriais madeireiros

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)