Critical comparison of Julius Kruttschnitt Mineral Research Centre (JKMRC) blast fragmentation models

Blast fragmentation can have a significant impact on the profitability of a mine. An optimum run of mine (ROM) size distribution is required to maximise the performance of downstream processes. If this fragmentation size distribution can be modelled and controlled, the operation will have made a significant advancement towards improving its performance. Blast fragmentation modelling is an important step in Mine to Mill™ optimisation. It allows the estimation of blast fragmentation distributions for a number of different rock mass, blast geometry, and explosive parameters. These distributions can then be modelled in downstream mining and milling processes to determine the optimum blast design. When a blast hole is detonated rock breakage occurs in two different stress regions - compressive and tensile. In the-first region, compressive stress waves form a 'crushed zone' directly adjacent to the blast hole. The second region, termed the 'cracked zone', occurs outside the crush one. The widely used Kuz-Ram model does not recognise these two blast regions. In the Kuz-Ram model the mean fragment size from the blast is approximated and is then used to estimate the remaining size distribution. Experience has shown that this model predicts the coarse end reasonably accurately, but it can significantly underestimate the amount of fines generated. As part of the Australian Mineral Industries Research Association (AMIRA) P483A Mine to Mill™ project, the Two-Component Model (TCM) and Crush Zone Model (CZM), developed by the Julius Kruttschnitt Mineral Research Centre (JKMRC), were compared and evaluated to measured ROM fragmentation distributions. An important criteria for this comparison was the variation of model results from measured ROM in the-fine to intermediate section (1-100 mm) of the fragmentation curve. This region of the distribution is important for Mine to Mill™ optimisation. The comparison of modelled and Split ROM fragmentation distributions has been conducted in harder ores (UCS greater than 80 MPa). Further work involves modelling softer ores. The comparisons will be continued with future site surveys to increase confidence in the comparison of the CZM and TCM to Split results. Stochastic fragmentation modelling will then be conducted to take into account variation of input parameters. A window of possible fragmentation distributions can be compared to those obtained by Split . Following this work, an improved fragmentation model will be developed in response to these findings.

Stratigraphy, facies architecture and tectonic implications of the Upper Devonian to Lower Carboniferous Campwyn Volcanics of the northern New England Fold Belt

Upper Devonian to Lower Carboniferous strata of the Campwyn Volcanics of east central Queensland preserve a substantial sequence of first-cycle volcaniclastic sedimentary and coeval volcanic rocks that record prolonged volcanic activity along the northern New England Fold Belt. The style and scale of volcanism varied with time, producing an Upper Devonian sequence of mafic volcano-sedimentary rocks overlain by a rhyolitic ignimbrite-dominated sequence that passes upward into a Lower Carboniferous limestone-bearing sedimentary sequence. We define two facies associations for the Campwyn Volcanics. A lower facies association is dominated by mafic volcanic-derived sedimentary breccias with subordinate primary mafic volcanic rocks comprising predominantly hyaloclastite and peperite. Sedimentary breccias record episodic and high energy, subaqueous depositional events with clastic material sourced from a mafic lava-dominated terrain. Some breccias contain a high proportion of attenuated dense, glassy mafic juvenile clasts, suggesting a syn-eruptive origin. The lower facies association coarsens upwards from a lithic sand-dominated sequence through a thick interval of pebble- to boulder-grade polymict volcaniclastic breccias, culminating in facies that demonstrate subaerial exposure. The silicic upper facies association marks a significant change in eruptive style, magma composition and the nature of eruptive sources, as well as the widespread development of subaerial depositional conditions. Crystal-rich, high-grade, low- to high-silica rhyolite ignimbrites dominate the base of this facies association. Biostratigraphic age controls indicate that the ignimbrite-bearing sequences are Famennian to lower-mid Tournaisian in age. The ignimbrites represent extra-caldera facies with individual units up to 40 m thick and mostly lacking coarse lithic breccias. Thick deposits of pyroclastic material interbedded with fine-grained siliceous sandstone and mudstone (locally radiolarian-bearing) were deposited from pyroclastic flows that crossed palaeoshorelines or represent syn-eruptive, resedimented pyroclastic material. Some block-bearing lithic-pumice-crystal breccias may also reflect more proximal subaqueous silicic explosive eruptions. Crystal-lithic sandstones interbedded with, and overlying the ignimbrites, contain abundant detrital volcanic quartz and feldspar derived from the pyroclastic deposits. Limestone is common in the upper part of the upper facies association, and several beds are oolitic (cf. Rockhampton Group of the Yarrol terrane). Overall, the upper facies association fines upward and is transgressive, recording a return to shallow-marine conditions. Palaeocurrent data from all stratigraphic levels in the Campwyn Volcanics indicate that the regional sediment-dispersal direction was to the northwest, and opposed to the generally accepted notion of easterly sediment dispersal from a volcanic arc source. The silicic upper facies association correlates in age and lithology to Early Carboniferous silicic volcanism in the Drummond (Cycle 1) and Burdekin Basins, Connors Arch, and in the Yarrol terranes of eastern Queensland. The widespread development of silicic volcanism in the Early Carboniferous indicates that silicic (rift-related) magmatism was not restricted to the Drummond Basin, but was part of a more substantial silicic igneous province.

Selective entrainment of sediment graded by size and density under waves

The influence of near-bed sorting processes on heavy mineral content in suspension is discussed. Sediment concentrations above a rippled bed of mixed quartz and heavy mineral sand were measured under regular nonbreaking waves in the laboratory. Using the traditional gradient diffusion process, settling velocity would be expected to strongly affect sediment distribution. This was not observed during present trials. In fact, the vertical gradients of time-averaged suspension concentrations were found to be similar for the light and heavy minerals, despite their different settling velocities. This behavior implies a convective rather than diffusive distribution mechanism. Between the nonmoving bed and the lowest suspension sampling point, fight and heavy mineral concentration differs by two orders of magnitude. This discrimination against the heavy minerals in the pickup process is due largely to selective entrainment at the ripple face. Bed-form dynamics and the nature of quartz suspension profiles are found to be little affected by the trialed proportion of overall heavy minerals in the bed (3.8-22.1%).

Entre rios, praias e planetas : travessias do congo da Barra do Jucu

O Espírito Santo abriga grande diversidade de expressões populares tradicionais que se dividem em grupos, saberes e celebrações. Uma das práticas mais evidentes são as bandas de Congo que abrangem grande parte do Estado e ganham cada vez mais notoriedade. A Barra do Jucu é uma das comunidades mais antigas do Espírito Santo, uma vila de pescadores que séculos atrás compunha parte da grande fazenda Araçatiba fundada pelos Jesuítas e administrada no século XIX pelo coronel Sebastião Vieira Machado. A diversidade cultural dessa região habitada por africanos, indígenas e europeus, propiciou o surgimento de práticas populares como a Marujada, a Folia de Reis e as Bandas de Congo, que persistem até hoje nos municípios de Cariacica, Vila Velha, Guarapari e Viana, no passado, pertencentes à grande fazenda Araçatiba. A formação do Congo na Barra do Jucu é resultado de rodas informais realizadas por conguistas de comunidades ribeirinhas vizinhas, promovidas principalmente pelo senhor Ignácio Vieira Machado, descendente do coronel Sebastião e lideradas por Alcides Gomes da Silva, descendente de negros africanos e açorianos habitantes da fazenda Araçatiba. Durante muito tempo essa prática foi marginalizada, mas atualmente o Congo é considerado um ícone da cultura capixaba. Essa ressignificação está ligada a um processo de valorização e projeção midiática que se iniciou nos anos 1980 e se intensificou nas décadas seguintes. Boa parte dos movimentos e eventos que estimularam esse processo ocorreu na comunidade da Barra do Jucu. Por outro lado, políticos, empresários, indústria do entretenimento e outros setores sociais, aproveitam cada vez mais dessa ascensão do Congo utilizando os grupos tradicionais para fins lucrativos e promocionais. De prática marginal até se tornar ícone cultural, o Congo da Barra do Jucu passou por fazendas, rios, praias e planetas. E sobre essas travessias não só geográficas, mas sociais, culturais e políticas é que este trabalho pretende refletir, além das práticas tradicionais dos grupos e seus usos, buscando trazer à tona as relações entre conguistas, instituições públicas e privadas, mídia e público.

Interpretation of gravity data to delineate structural features connected to low-temperature geothermal resources at Northeastern Portugal

A great number of low-temperature geothermal fields occur in Northern-Portugal related to fractured rocks. The most important superficial manifestations of these hydrothermal systems appear in pull-apart tectonic basins and are strongly conditioned by the orientation of the main fault systems in the region. This work presents the interpretation of gravity gradient maps and 3D inversion model produced from a regional gravity survey. The horizontal gradients reveal a complex fault system. The obtained 3D model of density contrast puts into evidence the main fault zone in the region and the depth distribution of the granitic bodies. Their relationship with the hydrothermal systems supports the conceptual models elaborated from hydrochemical and isotopic water analyses. This work emphasizes the importance of the role of the gravity method and analysis to better understand the connection between hydrothermal systems and the fractured rock pattern and surrounding geology. (c) 2013 Elsevier B.V. All rights reserved.

Capela do Senhor da Pedra: diagonóstico e proposta de tratamento da pedra

Mestrado em Engenharia Geotécnica e Geoambiente

Avaliação geológica e geotécnica do maciço da Pedreira de S. Domingos n.º 2 (Armamar)

Neste trabalho, apresentam-se e discutem-se os resultados da aplicação da técnica de amostragem linear de descontinuidades em faces expostas do maciço rochoso da pedreira granítica de S. Domingos Nº 2 (Fontelo, Armamar; N de Portugal). É, igualmente, utilizada informação sobre a rede de fracturação regional, obtida através da análise morfoestrutural de mapas topográficos e mapas geológicos. São ainda referidos os métodos utilizados no tratamento dos dados de terreno com o objectivo de definir as famílias de descontinuidades e de caracterizar estatísticamente a sua atitude, espaçamento e extensão. Os resultados obtidos são comparados, à mega escala e macro-escala, no sentido de averiguar a presença de um padrão de fracturação com dimensão multiescala. Esta abordagem foi refinada através da aplicação de Sistemas de Informação Geográfica. A aplicação desta técnica para a caracterização da compartimentação do maciço poderá contribuir para aperfeiçoar a gestão sustentável do georrecurso da pedreira de S. Domingos Nº 2 (Fontelo). O controlo geomecânico do desmonte do maciço rochoso é salientado com o intuito de uma abordagem de geo-engenharia integrada dos maciços rochosos.

Contraste e alteridade na viagem contemporânea

No mundo contemporâneo globalizado, definido pela sua qualidade essencialmente fluida e instável, o carácter distintivo da viagem parece dissolver-se face à contracção do planeta, à economia das ―trocas simbólicas‖ e a um alegado processo de diluição das diferenças e de homogeneização cultural. Com efeito, a mediatização da sociedade e a proliferação icónica contemporâneas produzem um aparente estado de saturação da geografia real e de multiplicação de lugares enquanto representações e imagens, permitindo pôr em causa a própria necessidade e urgência de deslocação, bem como admitir a abolição do ―estatuto de privilégio‖ de certos lugares e a derradeira quebra no conceito aurático das férias e das viagens, tradicionalmente assente em antinomias cruciais entre o quotidiano/familiar e o diferente/extraordinário. O presente artigo propõe-se abordar o paradigma da mobilidade contemporânea, nomeadamente no que diz respeito à traumática aniquilação do espaço e do tempo e ao seu impacto fortemente disruptivo sobre a dimensão ontológica de uma prática cultural cujo poder aurático se encontra tradicionalmente relacionado com a conquista de distâncias, a percepção de diferenças e a experiência de alteridade. O artigo pretende, por outro lado, refutar a declaração pós-moderna de que a familiarização com o outro conduz a uma diminuição do potencial de choque cultural no turismo contemporâneo, discutindo a relevância e a prevalência da busca de contraste e formas de vivência de alteridade no complexo novelo de motivações da viagem turística contemporânea.

HFCs e soluções alternativas viáveis

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica

Os sismos de 1964 na Ilha de S. Jorge (Açores)

During February of 1974, the western extremity of St. Jorge's Island, one of the Azores Islands group, was severely affected by intense earthquakes, causing heavy damage. One of the authors of the present work (T. P. R.) who at the time was employed in the Rosais Lighthouse, registered day after day all the phenomena he could observe, writting down a journal that is published herein. An introduction on the geology, tectonic's, and the seismology of St. Jorge’s Island, is presented. As it can be verified, this seismic crisis was associated to a short submarine vulcanic eruption.

Le gisement de Asseiceira, Portugal (Miocène supérieur) Données complémentaires sur Freiria de Rio Maior

A new upper Miocene locality at Asseiceira (Rio Maior), near the top of the "Calcários de Almoster e Santarém" unit (Almoster and Santarém limestones) is studied. Animal and plant fossils are described. Comparisons are drawn to other localities related to the same unit: Freiria and Azambujeira (middle and upper levels, both with large mammals). Small mammals from Asseiceira and Freiria point out to a rather old age amidst the upper Vallesian, MN 10 mammal-unit. This gives a fairly accurate datation for the "Calcários de Almoster e Santarém" and for the short time span of the corresponding sedimentation. Climate was warm and quite dry, with contrasting seasons and arid events. During upper Vallesian times, climate in Iberian Peninsula was varied but drier than in France, and specially so in the inner basins. However in Portugal and in Catalonia climate would he less different in comparison with that of the Rhône basin. Environmental evolution has been important: at Freiria and Azambujeira (middle level) there were mainly shallow lacustrine environments that received ressurgence waters from the nearby "Maciço calcário". Humid areas were closely surrounded by dense forests and these by broader and drier savanna or steppe areas. Still later, carbonate sedimentation ended. For some time there was still a river system with oxbows; humid areas probably were decreasing in favour of surrounding, rather dry environments. This study stressed the nced for revision of the geology of the region of Rio Maior and for a new geological mapping of that area. Environmental evolution has been important: at Freiria and Azambujeira (middle level) there were mainly shallow lacustrine environments that received ressurgence waters from the nearby "Maciço calcário".

Drawing and use of auxiliary projection nets (the program STEGRAPH)

The development of an algorithm for the construction of auxiliary projection nets (conform, equivalent and orthographic), in the equatorial and polar versions, is presented. The algorithm for the drawing of the "IGAREA 220" counting net (ALYES & MENDES, 1972), is also presented. Those algorithms are the base of STEGRAPH program (vers. 2.0), for MS-DOS computers, which has other applications.

Upper crustal structure of Madeira Island revealed from ambient noise tomography

We present the first image of the Madeira upper crustal structure, using ambient seismic noise tomography. 16 months of ambient noise, recorded in a dense network of 26 seismometers deployed across Madeira, allowed reconstructing Rayleigh wave Green's functions between receivers. Dispersion analysis was performed in the short period band from 1.0 to 4.0 s. Group velocity measurements were regionalized to obtain 20 tomographic images, with a lateral resolution of 2.0 km in central Madeira. Afterwards, the dispersion curves, extracted from each cell of the 2D group velocity maps, were inverted as a function of depth to obtain a 3D shear wave velocity model of the upper crust, from the surface to a depth of 2.0 km. The obtained 3D velocity model reveals features throughout the island that correlates well with surface geology and island evolution. (C) 2015 Elsevier B.V. All rights reserved.

Upper crustal structure of Madeira Island revealed from ambient noise tomography

We present the first image of the Madeira upper crustal structure, using ambient seismic noise tomography. 16 months of ambient noise, recorded in a dense network of 26 seismometers deployed across Madeira, allowed reconstructing Rayleigh wave Green's functions between receivers. Dispersion analysis was performed in the short period band from 1.0 to 4.0 s. Group velocity measurements were regionalized to obtain 20 tomographic images, with a lateral resolution of 2.0 km in central Madeira. Afterwards, the dispersion curves, extracted from each cell of the 2D group velocity maps, were inverted as a function of depth to obtain a 3D shear wave velocity model of the upper crust, from the surface to a depth of 2.0 km. The obtained 3D velocity model reveals features throughout the island that correlates well with surface geology and island evolution. (C) 2015 Elsevier B.V. All rights reserved.