Improving bovine udder health: a national mastitis control program in the Netherlands

Because of increasing bulk milk somatic cell counts and continuous clinical mastitis problems in a substantial number of herds, a national mastitis control program was started in 2005 to improve udder health in the Netherlands. The program started with founding the Dutch Udder Health Centre (UGCN), which had the task to coordinate the program. The program consisted of 2 parts: a research part and a knowledge-transfer part, which were integrated as much as possible. The knowledge-transfer part comprised 2 communication strategies: a central and a peripheral approach. The central approach was based on educating farmers using comprehensive science-based and rational argumentation about mastitis prevention and included on-farm study group meetings. Comprehensive education materials were developed for farmers that were internally motivated to improve udder health. In the peripheral approach it was tried to motivate farmers to implement certain management measures using nontechnical arguments. Mass media campaigns were used that focused on one single aspect of mastitis prevention. These communication strategies, as well as an integrated approach between various stakeholders and different scientific disciplines were used to reach as many farmers as possible. It should be noted that, because this intervention took place at a national level, no control group was available, as it would be impossible to isolate farmers from all forms of communication for 5 years. Based on several studies executed during and after the program, however, the results suggest that udder health seemed to have improved on a national level during the course of the program from 2005 to 2010. Within a cohort of dairy herds monitored during the program, the prevalence of subclinical mastitis did not change significantly (23.0 in 2004 vs. 22.2 in 2009). The incidence rate of clinical mastitis, however, decreased significantly, from 33.5 to 28.1 quarter cases per 100 cow years at risk. The most important elements of the farmers' mindset toward mastitis control also changed favorably. The simulated costs of mastitis per farm were reduced compared with a situation in which the mastitis would not have changed, with € 400 per year. When this amount is extrapolated to all Dutch farms, the sector as a whole reduced the total costs of mastitis by € 8 million per year. It is difficult to assign the improved udder health completely to the efforts of the program due to the lack of a control group. Nevertheless, investing € 8 million by the Dutch dairy industry in a 5-yr national mastitis control program likely improved udder health and seemed to pay for itself financially.

Dynamics of governance and control in inter-organizational software development

In recent years, development of information systems (IS) has rapidly changed towards increasing division of labor between firms. Two trends are emerging. First, client companies increasingly outsource software development to external service providers. Second, the formerly oligopolistic enterprise application software industry has started to disintegrate into focal partnership networks – so called platform ecosystems. Despite the increasing prominence of IS outsourcing and platform ecosystems, many of these inter-organizational partnerships fail to achieve expected benefits. Ineffective governance and control frequently plays a pivotal role in producing these failures. While designing effective governance and control mechanisms is always challenging, inter-organizational software development projects are often business-critical and exhibit additional dynamics and uncertainty. As a consequence governance and control have to be adapted over time. The three research projects included in this book provide a better understanding of how and why governance and control can be effectively adapted over time. The implications for successful management of inter-organizational software development projects are highly relevant for theory and practice.

The prospect of applying chemical elicitors and plant strengtheners to enhance the biological control of crop pests

An imminent food crisis reinforces the need for novel strategies to increase crop yields worldwide. Effective control of pest insects should be part of such strategies, preferentially with reduced negative impact on the environment and optimal protection and utilization of existing biodiversity. Enhancing the presence and efficacy of native biological control agents could be one such strategy. Plant strengthener is a generic term for several commercially available compounds or mixtures of compounds that can be applied to cultivated plants in order to ‘boost their vigour, resilience and performance’. Studies into the consequences of boosting plant resistance against pests and diseases on plant volatiles have found a surprising and dramatic increase in the plants' attractiveness to parasitic wasps. Here, we summarize the results from these studies and present new results from assays that illustrate the great potential of two commercially available resistance elicitors. We argue that plant strengtheners may currently be the best option to enhance the attractiveness of cultivated plants to biological control agents. Other options, such as the genetic manipulation of the release of specific volatiles may offer future solutions, but in most systems, we still miss fundamental knowledge on which key attractants should be targeted for this approach.

Plant strengtheners enhance parasitoid attraction to herbivore-damaged cotton via qualitative and quantitative changes in induced volatiles

BACKGROUND Herbivore-damaged plants release a blend of volatile organic compounds (VOCs) that differs from undamaged plants. These induced changes are known to attract the natural enemies of the herbivores and therefore are expected to be important determinants of the effectiveness of biological control in agriculture. One way of boosting this phenomenon is the application of plant strengtheners, which has been shown to enhance parasitoid attraction in maize. It is unclear whether this is also the case for other important crops. RESULTS The plant strengtheners BTH [benzo (1,2,3) thiadiazole-7-carbothioic acid S-methyl ester] and laminarin were applied to cotton plants, and the effects on volatile releases and the attraction of three hymenopteran parasitoids, Cotesia marginiventris, Campoletis sonorensis and Microplitis rufiventris, were studied. After treated and untreated plants were induced by real or simulated caterpillar feeding, it was found that BTH treatment increased the attraction of the parasitoids, whereas laminarin had no significant effect. BTH treatment selectively increased the release of two homoterpenes and reduced the emission of indole, the latter of which had been shown to interfere with parasitoid attraction in earlier studies. Canonical variate analyses of the data show that the parasitoid responses were dependent on the quality rather than the quantity of volatile emission in this tritrophic interaction. CONCLUSION Overall, these results strengthen the emerging paradigm that induction of plant defences with chemical elicitors such as BTH could provide a sustainable and environmentally friendly strategy for biological control of pests by enhancing the attractiveness of cultivated plants to natural enemies of insect herbivores. © 2014 Society of Chemical Industry

The broad-leaf herbicide 2,4-dichlorophenoxyacetic acid turns rice into a living trap for a major insect pest and a parasitic wasp

Synthetic chemical elicitors of plant defense have been touted as a powerful means for sustainable crop protection. Yet, they have never been successfully applied to control insect pests in the field. We developed a high-throughput chemical genetics screening system based on a herbivore-induced linalool synthase promoter fused to a β-glucuronidase (GUS) reporter construct to test synthetic compounds for their potential to induce rice defenses. We identified 2,4-dichlorophenoxyacetic acid (2,4-D), an auxin homolog and widely used herbicide in monocotyledonous crops, as a potent elicitor of rice defenses. Low doses of 2,4-D induced a strong defensive reaction upstream of the jasmonic acid and ethylene pathways, resulting in a marked increase in trypsin proteinase inhibitor activity and volatile production. Induced plants were more resistant to the striped stem borer Chilo suppressalis, but became highly attractive to the brown planthopper Nilaparvata lugens and its main egg parasitoid Anagrus nilaparvatae. In a field experiment, 2,4-D application turned rice plants into living traps for N. lugens by attracting parasitoids. • Our findings demonstrate the potential of auxin homologs as defensive signals and show the potential of the herbicide to turn rice into a selective catch crop for an economically important pest.

LUNG CANCER AMONG TEXAS MALE OIL REFINERY WORKERS, 1976 - 1980 (CASE-CONTROL STUDY)

The apparent excess in the rate of lung cancer among the population of Texas coastal counties has prompted this study. The main objective was to assess the risk of lung cancer among employees of oil refining industries. Data collected by UTSPH and NCI were used for this research. A non significant overall low risk of lung cancer was observed among workers ever employed in oil refining (COR = 0.84). A lower but not significant risk of lung cancer was detected among the same workers when classified by their usual industry of employment (COR = 0.77). An overall non significant crosstime decline in the risk of lung cancer was observed among most of the occupational groups within the oil refining industry, with the exception of professional/technical and clerical/sales occupations where a non significant crosstime increase in the risk was observed. ^

Los bioinsecticidas de nim en el control de plagas de insectos en cultivos económicos : La Habana (Cuba)

En Cuba, la generalización del cultivo del Nim (Azadirachta indica A. Juss) y el uso de los bioinsecticidas producidos a partir de éste como apoyo al desarrollo de una agricultura sostenible y ecológica, trae consigo la necesidad de validar su efectividad biológica en una gama cada vez más amplia de plagas de interés agrícola. En el presente trabajo se demuestra que con el uso de los productos OleoNim 80 CE, NeoNim 60 CE, CubaNim T, CubaNim SM y FoliarNim HM es posible controlar con eficacia la acción nociva de plagas tales como Diaphania hyalinata (L.) en melón, Empoasca fabae (Harris) en poroto, Thrips palmi (Karny) en pepino en organopónico y bajo condiciones de cultivo protegido, y Bemisia tabaci (Genn.) en poroto y tomate. Las efectividades biológicas alcanzadas en estas experiencias, oscilaron entre 75 y 100 %, lo cual confirma la factibilidad del uso de estos bioinsecticidas insertados en el Manejo Integrado de Plagas para una agricultura sostenible.

Eficiencia de control de "orugas defoliadoras" en soja (Glycine max L.), con insecticidas neurotóxicos y reguladores del crecimiento de los insectos

Las "orugas defoliadoras" afectan la producción del cultivo de soja, sobre todo en años secos y con altas temperaturas que favorecen su desarrollo. El objetivo del presente trabajo fue evaluar la eficiencia de control de insecticidas neurotóxicos e IGRs sobre "orugas defoliadoras" en soja. Se realizaron ensayos en lotes comerciales en tres localidades de la provincia de Córdoba en las campañas agrícolas 2008/09 y 2009/10, bajo un diseño de bloques al azar, con seis tratamientos y tres repeticiones. Los tratamientos fueron: T1: Clorpirifos (384 g p.a.ha-1), T2: Cipermetrina (37,5 g p.a.ha-1), T3: Lufenuron+Profenofos (15 + 150 g p.a.ha-1), T4: Metoxifenocide (28,8 g p.a.ha-1), T5: Novaluron (10 g p.a.ha-1) y T6: Testigo. El tamaño de las parcelas fue de 12 surcos de 10 m de largo distanciados a 0,52 m. La aplicación se realizó con una mochila provista de boquillas de cono hueco (40 gotas.cm-2), cuando la plaga alcanzó el umbral de daño económico. En cada parcela se tomaron cinco muestras a los 0, 2, 7 y 14 días después de la aplicación (DDA) utilizando el paño vertical, identificando y cuantificando las orugas vivas mayores a 1,5 cm. A los 14 DDA se extrajeron 30 folíolos por parcela (estrato medio y superior de la planta) y se determinó el porcentaje de defoliación utilizando el software WinFolia Reg. 2004. Se estimó el rendimiento sobre 5 muestras de 1 m2 en cada parcela y se realizó ANOVA y test de comparación de medias LSD de Fisher. El Clorpirifos mostró el mayor poder de volteo y el Metoxifenocide la mayor eficiencia a los 7 DDA. En general los IGRs mostraron mayor poder residual.

Actividad biológica de Lonchocarpus guaricensis Pittier en el control de larvas de Tuta absoluta (Meyrick)

La actividad biológica de Lonchocarpus guaricensis Pittier fue evaluada utilizando dos dosis de Tecnona® en el control de larvas de Tuta absoluta (Meyrick), Valle de Azapa, Chile, mediante una pulverización sobre plantas de tomate cv. Naomi en macetas, ubicadas aleatoriamente en un invernáculo dentro de un vivero. Semanas previas a la pulverización, las macetas se infestaron artificialmente con adultos del fitófago para obtener larvas en los foliolos. Los tratamientos evaluados fueron los siguientes: T1 (0,21 g de IA de L. guaricensis·L-1), T2 (0,43 g de IA de L. guaricensis·L-1), T3 (control positivo a base de spinosad 0,048 g de IA·L-1) y T0 (control negativo a base de agua de pozo). De acuerdo con el porcentaje de mortalidad acumulada de larvas contabilizadas a las 24, 48, 120 horas y 9no día post aplicación, no hay diferencias estadísticas entre los tratamientos T0 y T1, a su vez, T2 alcanza una media de 53,05% de mortalidad, no diferenciándose de T3 que logra un 73,9%. Se concluye que la dosis experimental L. guaricensis de 0,43 g de IA∙ L-1 puede constituir una alternativa interesante de utilizar en el Manejo Integrado de Plagas del cultivo de tomate en el Valle de Azapa.

Status and constraints of costly port rejection : a case from the Vietnamese frozen seafood export industry

While the rising exports have been the source of growth for many developing countries in recent years, the rate of commodities rejected at the ports of developed countries has also been high. Yet why it has remained so despite the costs involved is mostly unknown. This paper takes a case of the frozen seafood export industry in Vietnam and examines the current status of port rejection, roles played by various stakeholders along the value chains, and the constraints faced by the Vietnamese producers and exporters. It concludes with some policy implications, including strengthening the enforcement mechanism of standards compliance particularly at the upstream of the value chain and providing public testing labs for small-scale producers.

Political economy of low sulfurization and air pollution control policy in Japan : SOx emission reduction by fuel conversion

In the early stages of the development of Japan’s environmental policy, sulfur oxide (SOx) emissions, which seriously damage health, was the most important air pollution problem. In the second half of the 1960s and the first half of the 1970s, the measures against SOx emissions progressed quickly, and these emissions were reduced drastically. The most important factor of the reduction was the conversion to a low-sulfur fuel for large-scale fuel users, such as the electric power industry. However, industries started conversion to low-sulfur fuel not due to environmental concerns, but simply to reduce costs. Furthermore, the interaction among the various interests of the electric power industry, oil refineries, the central government, local governments, and citizens over the energy and environmental policies led to the measures against SOx emissions by fuel conversion.

Torque control of switched reluctance motors

This paper presents the performance of an instantaneous torque control method. The simulation and experimental results illustrate the capability of Switched Reluctance Motors (SRM) being used in the motor drive industry. Based on experimental data, the advantages of this control method and its disadvantages in practical implementation were studied. The model used in the simulation is the linear magnetic model which has the 12/8 structure, the same structure as the experimental switched reluctance motor.

Service needs forecasting: an approach for the automotive industry using analogies with medical ER management models.

During the past years, the industry has shifted position and moved towards “the luxury universe” whose customers are demanding, treating individuals as unique and valued customer for the business, offering vehicles produced with the state of the art technologies and implementing the highest finishing standards. Due to the competitive level in the market, car makers enable processes which equalizes customer services to E.R. management, being dealt with the maximum urgency that allows the comparison between both, car workshops and emergency rooms, where workshop bays or ramps will be equal to emergency boxes and skilled technicians are equivalent to the health care specialist, who will carry out tests and checks prior to afford any final operation, keeping the “patient” under control before it is back to normal utilization. This paper establishes a valid model for the automotive industry to estimate customer service demand forecasting under variable demand conditions using analogies with patient demand models used for the medical ER.

SERVICE NEEDS FORECASTING: An Approach for the Motor Industry Using Analogies with Medical ER Management Models.

During the past years, the industry has shifted position and moved towards “the luxury universe” whose customers are demanding, treating individuals as unique and valued customer for the business, offering vehicles produced with the state of the art technologies and implementing the highest finishing standards. Due to the competitive level in the market, motor makers enable processes which equalizes customer services to E.R. management, being dealt with the maximum urgency that allows the comparison between both, car workshops and emergency rooms, where workshop bays or ramps will be equal to emergency boxes and skilled technicians are equivalent to the health care specialist, who will carry out tests and checks prior to afford any final operation, keeping the “patient” under control before it is back to normal utilization. This paper ratify a valid model for the automotive industry to estimate customer service demand forecasting under variable demand conditions using analogies with patient demand models used for the medical ER

Advanced predictive quality control strategy involving different facilities

There are many industries that use highly technological solutions to improve quality in all of their products. The steel industry is one example. Several automatic surface-inspection systems are used in the steel industry to identify various types of defects and to help operators decide whether to accept, reroute, or downgrade the material, subject to the assessment process. This paper focuses on promoting a strategy that considers all defects in an integrated fashion. It does this by managing the uncertainty about the exact position of a defect due to different process conditions by means of Gaussian additive influence functions. The relevance of the approach is in making possible consistency and reliability between surface inspection systems. The results obtained are an increase in confidence in the automatic inspection system and an ability to introduce improved prediction and advanced routing models. The prediction is provided to technical operators to help them in their decision-making process. It shows the increase in improvement gained by reducing the 40 % of coils that are downgraded at the hot strip mill because of specific defects. In addition, this technology facilitates an increase of 50 % in the accuracy of the estimate of defect survival after the cleaning facility in comparison to the former approach. The proposed technology is implemented by means of software-based, multi-agent solutions. It makes possible the independent treatment of information, presentation, quality analysis, and other relevant functions.