Palatal lymphangioma: A case report

Lymphangioma is a rare, congenital benign tumor involving vascular malformation, with a great potential for recurrence. It appears during the early years of life and therefore is highly common among children. We report here a five-year-old patient with a simple lymphangioma. The mother of the child reported she had noted the lesion in the palate after an injury in the area with a pen. The recommended treatment was surgical excision since this was a small and well-delimited lesion. Periodic clinical controls for 18 months showed that the mucosa presented normal characteristics, with no signs of recurrence.

The performance of conventional and fluorescence-based methods for occlusal caries detection An in vivo study with histologic validation

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The Influence of Pit and Fissure Sealants on Infrared Fluorescence Measurements

The aim of this in vitro study was to evaluate the influence of pit and fissure sealants on fluorescence readings using lasers. We selected 166 permanent molars and randomly divided them into 4 groups which were each treated with a different sealant (a commercially available clear sealant, 2 opaque sealants and an experimental nanofilled clear sealant). The teeth were independently measured twice by 2 experienced dentists using conventional laser fluorescence (LF) and a laser fluorescence pen device (LFpen), before and after sealing, and again after thermocycling to simulate the thermal stressing between the tooth and the dental materials. Friedman test showed no statistically significant changes using LF and LFpen for the commercial clear sealant group, although values tended to increase after sealing. However, the values increased significantly after thermocycling. There was a statistically significant decrease in fluorescence after application of opaque sealants. After application of the experimental nanofilled clear sealant, LF values increased only after thermocycling, whereas the LFpen values increased after sealing and after thermocycling as well. The intraclass correlation coefficient ranged from 0.87 to 0.96 for interexaminer and 0.82 to 0.94 for intraexaminer reproducibility. It was shown that pit and fissure sealants influence LF and LFpen readings, with the values increasing or decreasing according to the material used. In conclusion, both laser fluorescence devices could be useful as an adjunct to detect occlusal caries under unfilled clear sealants. Nevertheless, surfaces sealed with clear nanofilled material could be assessed using only the LF device. Copyright (C) 2008 S. Karger AG, Basel.

Performance of fluorescence methods, radiographic examination and ICDAS II on occlusal surfaces in vitro

This study compared the performance of fluorescence-based methods, radiographic examination, and International Caries Detection and Assessment System (ICDAS) II on occlusal surfaces. One hundred and nineteen permanent human molars were assessed twice by 2 experienced dentists using the laser fluorescence (LF and LFpen) and fluorescence camera (FC) devices, ICDAS II and bitewing radiographs (BW). After measuring, the teeth were histologically prepared and assessed for caries extension. The sensitivities for dentine caries detection were 0.86 (FC), 0.78 (LFpen), 0.73 (ICDAS II), 0.51 (LF) and 0.34 (BW). The specificities were 0.97 (BW), 0.89 (LF), 0.65 (ICDAS II), 0.63 (FC) and 0.56 (LFpen). BW presented the highest values of likelihood ratio (LR)+ (12.47) and LR- (0.68). Rank correlations with histology were 0.53 (LF), 0.52 (LFpen), 0.41 (FC), 0.59 (ICDAS II) and 0.57 (BW). The area under the ROC curve varied from 0.72 to 0.83. Inter- and intraexaminer intraclass correlation values were respectively 0.90 and 0.85 (LF), 0.93 and 0.87 (LFpen) and 0.85 and 0.76 (FC). The ICDAS II kappa values were 0.51 (interexaminer) and 0.61 (intraexaminer). The BW kappa values were 0.50 (interexaminer) and 0.62 (intraexaminer). The Bland and Altman limits of agreement were 46.0 and 38.2 (LF), 55.6 and 40.0 (LFpen) and 1.12 and 0.80 (FC), for intra- and interexaminer reproducibilities. The posttest probability for dentine caries detection was high for BW and LF. In conclusion, LFpen, FC and ICDAS II presented better sensitivity and LF and BW better specificity. ICDAS II combined with BW showed the best performance and is the best combination for detecting caries on occlusal surfaces. Copyright (C) 2008 S. Karger AG, Basel.

Effect of Platelet-Rich Plasma on Peri-Implant Bone Repair: A Histologic Study in Dogs

The present study evaluated the effect of platelet-rich plasma (PRP) on pen-implant bone healing. A total of 9 mongrel dogs received 36 dental implants with sandblasted acid-etched surface in lower jaws in a split-mouth design: in the PRP group (n = 18 implants) the implants were placed in association with PRP, and in the control group (n = 18 implants) the implants were placed without PRP. Biopsies were obtained and prepared for histologic and histometric analysis after 15, 30, and 55 days of healing. The biopsies retrieved at 15 days showed delicate bone trabeculae formed by immature bone with presence of numerous osteoblasts for both groups. At 30 days the trabeculae presented reversal lines and evident lamellar disposition, where some thread spaces were filled by bone and dense connective tissue. At 55 days, bone healing was not altered in the control group, and histologic aspects were variable for the group treated with PRP. There was no significant difference between the groups for bone-to-implant contact (P > .05). PRP did not enhance bone formation around sandblasted acid-etched implants.

Disintegration of magnetic tablets in human stomach evaluated by alternate current Biosusceptometry

Oral administration is the most convenient route for drug therapy. The knowledge of the gastrointestinal transit and specific site for drug delivery is a prerequisite for development of dosage forms. The aim of this work was to demonstrate that is possible to monitor the disintegration process of film-coated magnetic tablets by multi-sensor alternate current Biosusceptometry (ACB) in vivo and in vitro. This method is based on the recording of signals produced by the magnetic tablet using a seven sensors array and signal-processing techniques. The disintegration was confirmed by signals analysis in healthy human volunteers' measurements and in vitro experiments. Results showed that ACB is efficient to characterize the disintegration of dosage forms in the stomach, being a research tool for the development of new pharmaceutical dosage forms. (C) 2003 Elsevier B.V. All rights reserved.

Influence of compression forces on tablets disintegration by AC Biosusceptometry

Analysis of physical phenomena that occurs during tablet disintegration has been studied by several experimental approaches; however none of them satisfactorily describe this process. The aim of this study was to investigate the influence of compression force on the tablets by associating the AC Biosusceptometry with consolidated methods in order to validate the biomagnetic technique as a tool for quality control in pharmaceutical processes.Tablets obtained at five compression levels were submitted to mechanical properties tests. For uncoated tablets, water uptake and disintegration force measurements were performed in order to compare with magnetic data. For coated tablets, magnetic measurements were carried out to establish a relationship between physical parameters of the disintegration process. According to the results, differences between the compression levels were found for water uptake, force development and magnetic area variation measurements. ACB method was able to estimate the disintegration properties as well as the kinetics of disintegration process for uncoated and coated tablets. This study provided a new approach for in vitro investigation and validated this biomagnetic technique as a tool for quality control for pharmaceutical industry. Moreover, using ACB will also be possible to test these parameters in humans allowing to establish an in vitro/in vivo correlation (IVIVC). (C) 2007 Elsevier B.V. All rights reserved.

Paternal treatment with cisplatin impairs reproduction of adult male offspring in rats

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

KARYOTYPE and NUCLEOLUS ORGANIZER REGIONS of Ophisternon aenigmaticum (Teleostei: Synbranchiformes: Synbranchidae) FROM VENEZUELA

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Variações anatômicas no aparelho reprodutor masculino de Chaunus ornatus (Wied-Neuwied, 1821) (Anura, Bufonidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Chemical composition and fatty acid profile of rhea (Rhea americana) meat

The purpose of this work was to determine the proximate composition and fatty acid profiles of the Gastrocnemius pars interna intramuscular fat (IMF) of rhea (Rhea americana) thighs. The birds were bred in captivity, fed with balanced feed (Nutriavestruz Crescimento - Purina) and kept in a pen with grass ad lib. The birds of both sexes used in the research weighed 23 kg on average and were aged about twelve (12) months old. They were subjected to hydric diet (12 h) before slaughtering by electric shock. The rhea meat showed an average moisture, protein, ash and total lipid contents of 74.1%, 22.8%, 1.5% and 1.6%, respectively. It was noticed the predominance of monounsaturated fatty acids (MUFA) in intramuscular fat (IMF), 42.3% and a high percentage of polyunsaturated fatty acids (PUFA), 29.7%.. The fatty acids found in higher proportion in rhea IMF were: 18:2n-6 (24.33%), 18: 1n-9 (19.25%),16:0 (13.70%),22: 1n9 (11.40%),18:0 (10.66%),15: 1n-10 (8.62%),24: 1n-9 (2.90%) and 20:4n-6 (1.72%). The PUFA/SFA and n-6/n-3 ratios were 1.06 and 31.30, respectively. The consumption of rhea meat is a healthy alternative to red meat as it points to a lower susceptibility to cardiovascular diseases caused by the high consumption of fat comparatively to the consumption of meat from most domesticated animals.

Potentiometric determination of captopril in pharmaceutical formulations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Protein, methionine+cystine and lysine levels for Japanese quails during the production phase

An experiment was conducted at Faculdade de Medicina Veterinária e Zootecnia/Unesp - Botucatu for 168 days to evaluate the effects of protein, Met + Cys and lysine diet levels on egg production and egg quality of laying Japanese quails. Quails with 42 days of age were reared in a completely randomized design. There were 1,944 quails distributed in four replicates of 27 birds per pen, according to a factorial 3x3x2 with three crude protein levels (16, 18 and 20% CP), three Met + Cys levels (0.700; 0.875 and 1.050%) and two lysine levels (1.100 and 1.375%). Birds fed diets with 18 and 20% CP had higher feed intake and egg production than those fed diets with 16% CP. There was significant interaction (p<0.05) between protein and Met + Cys levels on egg weight. There was no effects (p>0.05) of the protein level on feed conversion per dozen eggs; however, improved feed conversion per egg mass was seen for birds fed diets with 20% CP compared to those fed diets with 16% and 18% CP. Protein and lipid percentage in the yolk increased when dietary protein level increased from 16 to 18%. Increasing Met + Cys from 0.700% to 0.875% reduced yolk protein percentage. Higher lipid percentage in the yolk was seen in eggs from quails fed diets with 1.050% Met + Cys, whereas 1.375% lysine in the diet of resulted in decreased egg production and egg mass, besides poorer feed conversion per dozen eggs and per egg mass.

Influência do fotoperíodo no consumo alimentar, produção e composição do leite de ovelhas Bergamácia

O objetivo deste trabalho foi avaliar o efeito do fotoperíodo sobre o consumo alimentar, produção e composição do leite (gordura, proteína, lactose, sólidos totais) e número de células somáticas de sete ovelhas da raça Bergamácia, submetidas a um fotoperíodo considerado curto (12 horas luz:12 horas escuro), e oito ovelhas da mesma raça, a um fotoperíodo longo (18 horas luz:6 horas escuro), durante as últimas quatro semanas de gestação e três meses de lactação. Para comparação, foi utilizado o teste t para duas amostras independentes. O consumo alimentar avaliado, diariamente, para cada baia com duas ovelhas, não diferiu entre os tratamentos. No fotoperíodo curto, o consumo médio diário foi de 4,48 kg e, no fotoperíodo longo, de 4,40 kg. Não foi observada diferença significativa entre os fotoperíodos, para a produção de leite e teores de proteína, lactose e sólidos totais, quando considerados os 84 dias de lactação. No fotoperíodo curto, a porcentagem média de gordura foi 5,57%, índice superior ao obtido no fotoperíodo longo, de 5,21%. Na análise dos resultados, a cada semana, notou-se que na segunda e na quarta semanas de lactação, a produção de leite foi maior nas ovelhas do fotoperíodo longo. O número de células somáticas não diferiu entre os fotoperíodos e manteve-se baixo por toda a lactação. O maior número de horas de luz estimula a produção de leite no primeiro mês de lactação, principalmente na quarta semana, e as porcentagens de gordura e sólidos totais são menores nos períodos de maior produção de leite.

Pulverização em CDA 250 herbicida pendimethalin na cultura do arroz de sequeiro

Foi estudada a viabilidade de utilização da pulverização CDA 25C, na aplicação do herbicida em pré-emergência na cultura do arroz de sequeiro. O herbicida empregado foi o pendimethalin nas doses de 0,0; 1,5; 2,0; 2,5 e 3,0 litro s/ha da formulação comercial a 50%. A pulverização convencional foi efetuada com bicos 11003 com consumo de 200 litros de calda per hectare. O processo CDA 250 foi aplicado por meio de bico rotativo (Micromax) com dois níveis de consumo de calda : 50 1/ha e 27 1/ha. Os resultados mostraram que: a) - o método CDA 250 proporciona controle dc mato e produtividade de arroz equivalentes ao método convencional; b) para o bico Micromax, a aplicação da formulação comercial de pendimethalin a 50% com vazão de 0,48 1/min./bico, a distância entre bicos deve ser de 1,75 m e para a vazão de 0,96 1/min./bloco, essa distancia deve ser de 1,90 m; c)- a aplicação do pendimethalin 50% C.E. pelo processo CDA 250, empregando 27 litros de calda por hectare foi o processo mais interessante por oferecer vantagens logísticas apreciáveis.