1000 resultados para Núcleo de Integração


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The research aimed to understand the challenges for the implementation of the proposed integration between the Civil Police and the Military Police in Rio Grande do Norte to the proposals of the SUSP. This study aimed to explore the gap with regard to the deepening of the possible causes that may hinder the implementation of integrated working between the police in public security, through a specific analysis on the state of Rio Grande do Norte. Was based on a theoretical framework that includes policies: general concepts, the steps of a public policy, the implementation stage , public security : conceptual definitions, policies on security in Brazil, the structure of public security in Brazil and systems police, Military Police x Civil Police: Roles and conflicts , integrating public security: the challenges to be overcome, the Unified public Safety (SUSP) and the main difficulties in the integration of the police. Being classified as to the purposes as an exploratory research on how to approach ranks as qualitative. The research unit was the Center for Integrated Operations Public Safety (CIOSP) through three subjects who were the chief CIOSP, the representative of the military police acting with the CIOSP, and representative civil police also active with the CIOSP. These subjects were chosen because of the understanding that individuals occupying senior positions would have more ability to respond to questions that guide the research problem. Data were collected through a set of interviews, qualitative data analysis was performed based content analysis, based on the definition of categories of analysis, gated time cross. With the results, it was revealed that the main problems of integration between the state police are treatment protocols, lack of political will and lack of infrastructure. The relationship between the Military Police and Civil Police in Rio Grande do Norte has differing cultural aspect, but can be considered as good value, professionalism and integrated operations. The implementation of CIOSP-RN followed the characteristics of the top-down model, the main difficulties in implementing the proposals of the SUSP, lack of own resources, the lack of standardization in public safety and the lack of professional training of public safety. It was concluded that with respect to the challenges to the implementation of the proposed integration between the Civil Police and the Military Police in Rio Grande do Norte to the proposals of the SUSP, the actions follow the characteristics of the top-down model, with no autonomy of administrators public to say in decisions, which restricts the view of the public safety of the state

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Since centuries ago, the Asians use seaweed as an important source of feeding and are their greatest world-wide consumers. The migration of these peoples for other countries, made the demand for seaweed to increase. This increasing demand prompted an industry with annual values of around US$ 6 billion. The algal biomass used for the industry is collected in natural reservoirs or cultivated. The market necessity for products of the seaweed base promotes an unsustainable exploration of the natural banks, compromising its associated biological balance. In this context, seaweed culture appears as a viable alternative to prevent the depletion of these natural supplies. Geographic Information Systems (GIS) provide space and produce information that can facilitate the evaluation of important physical and socio-economic characteristics for the planning of seaweed culture. This objective of this study is to identify potential coastal areas for seaweed culture in the state of Rio Grande do Norte, from the integration of social-environmental data in the SIG. In order to achieve this objective, a geo-referred database composed of geographical maps, nautical maps and orbital digital images was assembled; and a bank of attributes including physical and oceanographical variables (winds, chains, bathymetry, operational distance from the culture) and social and environmental factors (main income, experience with seaweed harvesting, demographic density, proximity of the sheltered coast and distance of the banks) was produced. In the modeling of the data, the integration of the space database with the bank of attributes for the attainment of the map of potentiality of seaweed culture was carried out. Of a total of 2,011 ha analyzed by the GIS for the culture of seaweed, around 34% or 682 ha were indicated as high potential, 55% or 1,101 ha as medium potential, and 11% or 228 ha as low potential. The good indices of potentiality obtained in the localities studied demonstrate that there are adequate conditions for the installation of seaweed culture in the state of Rio Grande do Norte

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O objetivo deste trabalho foi avaliar cenários de níveis freáticos extremos, em bacia hidrográfica, por meio de métodos de análise espacial de dados geográficos. Avaliou-se a dinâmica espaço‑temporal dos recursos hídricos subterrâneos em área de afloramento do Sistema Aquífero Guarani. As alturas do lençol freático foram estimadas por meio do monitoramento de níveis em 23 piezômetros e da modelagem das séries temporais disponíveis de abril de 2004 a abril de 2011. Para a geração de cenários espaciais, foram utilizadas técnicas geoestatísticas que incorporaram informações auxiliares relativas a padrões geomorfológicos da bacia, por meio de modelo digital de terreno. Esse procedimento melhorou as estimativas, em razão da alta correlação entre altura do lençol e elevação, e agregou sentido físico às predições. Os cenários apresentaram diferenças quanto aos níveis considerados extremos - muito profundos ou muito superficiais - e podem subsidiar o planejamento, o uso eficiente da água e a gestão sustentável dos recursos hídricos na bacia.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

La llamada Iniciativa para la Integración de Infraestructura Regional Suramericana (IIRSA) es un acuerdo multinacional celebrado entre los 12 países de América del Sur desde el año 2000, materializado a través de 10 ejes de comercialización orientados a la construcción de varios proyectos de infraestructura, que incluye la construcción de una enorme red de energía, de comunicación y transporte. Estos proyectos han sido financiados principalmente por los organismos multilaterales (BID, CAF, FONPLATA) profundizando la dependencia económica y política de los países involucrados, en especial mediante el aumento de la deuda externa, las empresas transnacionales garantizarán la infraestructura necesaria para la explotación más acentuada de nuestros recursos naturales y de la mano de obra barata, asegurando el abastecimiento de sus mercados. En este sentido, el discurso de crecimiento económico regional creará los mecanismos necesarios para la reproducción ampliada del sistema capitalista, mediante la promoción de la liberalización de los mercados internacionales, tales como intenta los Estados Unidos a través del Área de Libre Comercio de las Américas. En realidad, es un Desarrollo Regional de los países del Norte, un plan estratégico de ordenamiento territorial construido por transnacionales y dictado por el imperialismo de Norteamérica. Bajo la dirección del gobierno de Brasil ha sido implementado sigilosamente, para que los jefes de Estado, sin nombrarlo, ejecuten sus planes de desarrollo como parte de esta tan evidente estrategia de saqueo, entusiasmados y convencidos de que serán generosamente recompensados. Proclaman e inauguran proyectos de infraestructura que las empresas multinacionales y transnacionales consideran indispensables para el saqueo de los recursos naturales que aún quedan, después de cinco siglos de explotación continua de América Latina. En este sentido, nuestra investigación se volvió hacia el análisis de lo sector energético de lo Eje Perú-Brasil-Bolivia, por considerarlo de suma importancia para el mantenimiento de la explotación y consolidación hegemónica de las corporaciones multinacionales en América Latina

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The economic regional integration is a phenomenon observed in numerous occasions inside the global economic reality. Watchful to that phenomenon, the 1988 s Brazilian constitutional order establish in its 4th article, single paragraph, the commitment to seek for the Latin- American integration, as a Fundamental Principle to the Brazilian Federative Republic. Regarding the mentioned constitutional disposition s realization, the Brazilian State celebrated, specially, the 1980 s Montevideo Treaty, creating the Latin-American Integration Association, and the 1991 s Asuncion Treaty, performing the duty to establish a common market, in sub regional level, with Argentina, Paraguay and Uruguay, called Mercado Comum do Sul. However, due to an addiction to a wrong comprehension of State s Sovereignty Principle, the Constitution imposes to the international rules an incorporation process, without providing any privilege to those ones regarding the integration constitutional disposition s realization, whether original or derived. The Brazilian s Supreme Court, as matter of fact, affirmed that it is not possible, facing the actual constitutional order, to grant any character of preference. Also in the controversies solution mechanism, responsible for the law s execution in case of its noncompliance, where found malfunctions, most notably the system s open character and its excessive procedural flexibility, in addiction to restricting the access of individuals. It follows from these findings, then, the lack of legal certainty provided by the Mercosul s legal system, considering its effects both international and within the Brazilian state. Among the possible solutions to reduce or eliminate the problem are using the practice of the so-called executive agreements in the Mercosul s original rules incorporation to the Brazilian state, the creation of a Mercosul s court of law and/or a constitutional reform

Relevância:

20.00% 20.00%

Publicador:

Resumo:

As an effect of the growing interdependence in international relations, regional integration was conceived to face globalization, with a remarkable influence in politics and law, since the first steps of the European experience. In Latin America, regional integration ideas have blossomed in the 60 s. Among its experiences, MERCOSUL is the one with the most advanced objectives. However, MERCOSUL has not managed to achieve the objectives planned nor moved forward the integration process. Differently of what happened in Europe, in MERCOSUL the common market projected is concluded. It faced many disappointments throughout its brief history. As it matters to law, those were caused by the absence of supranationality, a mechanism that would allow MERCOSUL s decisions to be directly binding in the States with no need of bureaucratic proceedings to incorporate them to national legal systems. Among Latin American States, Brazil is probably the most resistant to integration process, due to Federal Constitution 1988 rigidity and legal professionals conservadorism towards opening legal system to international law. In Brazil hermeneutical standards are always based on national sovereignty and international law is referred as less important. The problems become more visible relating to taxation, a subject that plays an enormous role in integration process for its economic impact, demanding the execution of tax harmonization policies compatible to the integration levels aspired. However, because of the large number of tax rules in the Federal Constitution, structural changes initiatives face difficulties in order to be implemented. Actually, after two Constitutional Reforms on taxation, Brazil has not yet succeeded on promoting the necessary adaptations to regional integration. The research has confirmed the hypothesis that supranationality has indispensably to be adopted if Brazil really desires to move forward the integration process. But it has also been demonstrated that there are hermeneutical paths suitable to the constitutional profile which allow the adoption of supranationality, through the revision of the sovereignty traditional concept

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O trabalho foi desenvolvido no município de Jaboticabal, SP, no ano agrícola de 1990/91, onde testou-se a integração de práticas culturais e menor dose de herbicida aplicado em pósemergência na cultura da soja, cultivar Paraná. O delineamento experimental utilizado foi o de blocos ao acaso, com dezesseis tratamentos e quatro repetições, no esquema fatorial 4x2x2, sendo quatro tipos de manejos de plantas daninhas: testemunha infestada, 50% da dose recomendada (360 g ia/ha) do herbicida bentazon, dose recomendada do herbicida bentazon (720 g ia/ha) e testemunha capinada; dois espaçamentos entre-linhas: 30 cm e 60 cm; e duas densidades: normal e reduzida (média de 20 e 10 plantas por metro, respectivamente). Observou-se que a quantidade de matéria seca das plantas daninhas por época da colheita da soja, foi significativamente maior nos tratamentos com espaçamento maior e densidade reduzida. O arranjo proporcionado pela densidade normal (média de 20 plantas /m) e menor espaçamento (30 cm) entre-linhas, proporcionou sombreamento mais precoce do solo e foi a melhor opção de controle cultural das plantas daninhas em todos os tratamentos testados. Não foi observado sintomas de intoxicação e nem efeitos negativos sobre a nodulação das plantas de soja, por parte do herbicida aplicado, em ambas as doses testadas.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O trabalho foi desenvolvido no município de Jaboticabal, SP, no ano agrícola de 1990/91, onde testou-se a integração de práticas culturais e menor dosagem de herbicida aplicado em pós-emergência na cultura da soja, cultivar Paraná. O delineamento experimental utilizado foi o de blocos ao acaso, com dezesseis tratamentos e quatro repetições, sendo quatro tipos de manejos de plantas daninhas: testemunha infestada, 50% da dose recomendada (360 g/ha do herbicida bentazon, dose recomendada do herbicida bentazon (720 g/ha) e testemunha capinada; dois espaçamentos entre-linhas: 30 cm e 60 cm; e duas densidades: normal e reduzida (em torno de 20 e 10 plantas por metro linear, respectivamente). Observou-se que a quantidade de matéria seca das plantas daninhas por época da colheita da soja, foi ligeiramente maior no tratamento com 50% do que no tratamento com 100% da dose do herbicida, porém a diferença não foi significativa. A produtividade no tratamento com 50% de redução na dose do herbicida foi 8,7% menor do que no tratamento com 100%. A redução de 50% na dose do herbicida testado, quando se interagiu com espaçamento e densidades adequadas (30 cm entre-linhas e densidade normal), é possível, considerando-se aceitável as perdas menores que 10% de grãos de soja em relação ao tratamento com dose normal e levando-se em conta os benefícios de tal redução da dose do herbicida.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A integração entre plantas resistentes e agentes de controle biológico pode ser uma alternativa viável para o manejo do pulgão-verde, Schizaphis graminum (Rondani), na cultura do sorgo. Experimentos foram conduzidos com a finalidade de avaliar o efeito de quatro genótipos de sorgo: GR 11111 e TX 430 x GR 111 (resistentes), GB 3B (moderadamente resistente), e BR 007B (suscetível), sobre o controle biológico do pulgão S. graminum realizado pelo predador Chrysoperla externa (Hagen). Para isso, avaliaram-se diferentes níveis de infestação de S. graminum, na presença e ausência do predador, em casa-de-vegetação e a viabilidade de controle de S. graminum no campo. O efeito do predador foi notado 25 dias após a infestação, proporcionando maior crescimento das plantas e menores danos. Os danos também foram menores nos genótipos resistentes e aumentaram com a elevação dos níveis de infestação, sendo menores na presença do predador C. externa. em condições de campo, a integração dos dois métodos de controle proporcionou 83% de redução de danos, quando se utilizou o genótipo resistente TX 430 x GR 111, que foi considerado o mais promissor dentre os estudados.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This master's thesis aims to ascertain how the Stakeholders interactions influence the adoption of green marketing strategies from the perspective of the Alpha Company, a furniture industry located in Rio Grande do Norte, Brazil. The methodology has a qualitative approach and uses the exploratorydescriptive case study method as model of formal and systematic study. Following the theoretical and conceptual propositions of Polonsky (1995), Michell, Angle and Wood (1997) and Frooman (1999) as a reference base. This study identifies and assesses the importance degree of the relevant stakeholders, shows their expectations and needs and describes the tactics used by the company for the implementation of green marketing strategies. The study describes the reality of a furniture industry in Rio Grande do Norte, and shows his philosophy and background; identifies present stakeholders that influence the decision process of the company and also, analyzes the degree of importance of each group showing their needs and expectations and, finally, it states the changes in the organization with the implementation of green marketing strategies. The results it s concluded that stakeholders are taken into consideration in the adoption of green marketing strategies, even without a proper strategic perception from the company, an imperative to advance towards the adoption of the green marketing philosophy. This case study explores knowledge that may be used and suited to small companies that act in the strategic segment-trend of green marketing

Relevância:

20.00% 20.00%

Publicador:

Resumo:

T'his dissertation proposes alternative models to allow the interconnectioin of the data communication networks of COSERN Companhia Energética do Rio Grande do Norte. These networks comprise the oorporative data network, based on TCP/IP architecture, and the automation system linking remote electric energy distribution substations to the main Operatin Centre, based on digital radio links and using the IEC 60870-5-101 protoco1s. The envisaged interconnection aims to provide automation data originated from substations with a contingent route to the Operation Center, in moments of failure or maintenance of the digital radio links. Among the presented models, the one chosen for development consists of a computational prototype based on a standard personal computer, working under LINUX operational system and running na application, developesd in C language, wich functions as a Gateway between the protocols of the TCP/IP stack and the IEC 60870-5-101 suite. So, it is described this model analysis, implementation and tests of functionality and performance. During the test phase it was basically verified the delay introduced by the TCP/IP network when transporting automation data, in order to guarantee that it was cionsistent with the time periods present on the automation network. Besides , additional modules are suggested to the prototype, in order to handle other issues such as security and prioriz\ation of the automation system data, whenever they are travesing the TCP/IP network. Finally, a study hás been done aiming to integrate, in more complete way, the two considered networks. It uses IP platform as a solution of convergence to the communication subsystem of na unified network, as the most recente market tendencies for supervisory and other automation systems indicate

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Relevância:

20.00% 20.00%

Publicador:

Resumo:

New materials made from industrial wastes have been studied as an alternative to traditional fabrication processes in building and civil engineering. These materials are produced considering some issues like: cost, efficiency and reduction of nvironmental damage. Specifically in cases of materials destined to dwellings in low latitude regions, like Brazilian Northeast, efficiency is related to mechanical and thermal resistance. Thus, when thermal insulation and energetic efficiency are aimed, it s important to increase thermal resistance without depletion of mechanical properties. This research was conducted on a construction element made of two plates of cement mortar, interspersed with a plate of recycled expanded polystyrene (EPS). This component, widely known as sandwich-panel, is commonly manufactured with commercial EPS whose substitution was proposed in this study. For this purpose it was applied a detailed methodology that defines parameters to a rational batching of the elements that constitute the nucleus. Samples of recycled EPS were made in two different values of apparent specific mass (ρ = 65 kg/m³; ρ = 130 kg/m³) and submitted to the Quick-Line 30TM that is a thermophysical properties analyzer. Based on the results of thermal conductivity, thermal capacity and thermal diffusivity obtained, it was possible to assure that recycled EPS has thermal insulation characteristics that qualify it to replace commercial EPS in building and civil engineering industry

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Currently there is still a high demand for quality control in manufacturing processes of mechanical parts. This keeps alive the need for the inspection activity of final products ranging from dimensional analysis to chemical composition of products. Usually this task may be done through various nondestructive and destructive methods that ensure the integrity of the parts. The result generated by these modern inspection tools ends up not being able to geometrically define the real damage and, therefore, cannot be properly displayed on a computing environment screen. Virtual 3D visualization may help identify damage that would hardly be detected by any other methods. One may find some commercial softwares that seek to address the stages of a design and simulation of mechanical parts in order to predict possible damages trying to diminish potential undesirable events. However, the challenge of developing softwares capable of integrating the various design activities, product inspection, results of non-destructive testing as well as the simulation of damage still needs the attention of researchers. This was the motivation to conduct a methodological study for implementation of a versatile CAD/CAE computer kernel capable of helping programmers in developing softwares applied to the activities of design and simulation of mechanics parts under stress. In this research it is presented interesting results obtained from the use of the developed kernel showing that it was successfully applied to case studies of design including parts presenting specific geometries, namely: mechanical prostheses, heat exchangers and piping of oil and gas. Finally, the conclusions regarding the experience of merging CAD and CAE theories to develop the kernel, so as to result in a tool adaptable to various applications of the metalworking industry are presented