Coupling Mechanical and Electrical Behavior in the Multi-scale Simulation of Polymer-based CNT Nanocomposites

A numeric model has been proposed to investigate the mechanical and electrical properties of a polymeric/carbon nanotube (CNT) composite material subjected to a deformation force. The reinforcing phase affects the behavior of the polymeric matrix and depends on the nanofiber aspect ratio and preferential orientation. The simulations show that the mechanical behavior of a computer generated material (CGM) depends on fiber length and initial orientation in the polymeric matrix. It is also shown how the conductivity of the polymer/CNT composite can be calculated for each time step of applied stress, effectively providing the ability to simulate and predict strain-dependent electrical behavior of CNT nanocomposites.

Electro-mechanical properties of triblock copolymer styrene-butadiene-styrene / carbon nanotube composites for large deformation sensor applications

Thermoplastic elastomer/carbon nanotube composites are studied for sensor applications due to their excellent mechanical and electrical properties. Piezoresisitive properties of tri-block copolymer styrene-butadiene-styrene (SBS)/ carbon nanotubes (CNT) prepared by solution casting have been investigated. Young modulus of the SBS/CNT composites increases with the amount of CNT filler content present in the samples, without losing the high strain deformation on the polymer matrix (~1500 %). Further, above the percolation threshold these materials are unique for the development of large deformation sensors due to the strong piezoresistive response. Piezoresistive properties evaluated by uniaxial stretching in tensile mode and 4-point bending showed a Gauge Factors up to 120. The excellent linearity obtained between strain and electrical resistance makes these composites interesting for large strain piezoresistive sensors applications.

Fatigue Prediction on Fibrin Poly-ε-caprolactone Macroporous Scaffolds

Tissue engineering applications rely on scaffolds that during its service life, either for in-vivo or in vitro applications, are under mechanical solicitations. The variation of the mechanical condition of the scaffold is strongly relevant for cell culture and has been scarcely addressed. Fatigue life cycle of poly-ε-caprolactone, PCL, scaffolds with and without fibrin as filler of the pore structure were characterized both dry and immersed in liquid water. It is observed that the there is a strong increase from 100 to 500 in the number of loading cycles before collapse in the samples tested in immersed conditions due to the more uniform stress distributions within the samples, the fibrin loading playing a minor role in the mechanical performance of the scaffolds

Energy harvesting performance of piezoelectric electrospun polymer fibers and polymer/ceramic composites

The energy harvesting efficiency of electrospun poly(vinylidene fluoride), its copolymer vinylidene fluoride-trifluoroethylene and composites of the later with piezoelectric BaTiOon interdigitated electrodes has been investigated. Further, a study of the influence of the electrospinning processing parameters on the size and distribution of the composites fibers has been performed. It is found that the best energy harvesting performance is obtained for the pure poly(vinylidene fluoride) fibers, with power outputs up to 0.03 W and 25 W under low and high mechanical deformation. The copolymer and the composites show reduced power output due to increased mechanical stiffness. The obtained values, among the largest found in the literature, the easy processing and the low cost and robustness of the polymer, demonstrate the applicability of the developed system.

Thermal degradation of Pb(Zr0.53Ti0.47)O3/poly(vinylidene fluoride) composites as a function of ceramic grain size and concentration

Poly(vinylidene fluoride)/Pb(Zr0.53Ti0.47)O3,([PVDF]1−x/[PZT]x) composites of volume fractions x and (0–3) type connectivity were prepared in the form of thin films. PZT powders with average grain sizes of 0.2, 0.84, and 2.35 μm in different volume fraction of PZT up to 40 % were mixed with the polymeric matrix. The influence of the inorganic particle size and its content on the thermal degradation properties of the composites was then investigated by means of thermo-gravimetric analysis. It is observed that filler size affects more than filler concentration the degradation temperature and activation energy of the polymer. In the same way and due to their larger specific area, smaller particles leave larger solid residuals after the polymer degradation. The polymer degradation mechanism is not significantly modified by the presence of the inorganic fillers. On the other hand, an inhibition effect occurs due to the presence of the fillers, affecting particularly the activation energy of the process.

Piezoresistive sensors for force mapping of hip-prostheses

The success of artificial prosthetic replacements depends on the fixation of the artificial prosthetic component after being implanted in the thighbone. The materials for fixation are subject to mechanical stresses, which originate permanent deformations, incipient cracks and even fatigue fractures. This work shows the possibility of monitoring the mechanical stress over time in prosthesis. In this way, highly sensitive silicon thin-film piezoresistive sensors were developed attached to prosthesis and their results compared with commercial strain gauge sensors. Mechanical stress-strain experiments were performed in compressive mode, during 10,000 cycles. Experimental data was acquired at mechanical vibration frequencies of 0.5 Hz, 1 Hz and 5 Hz, and sent to a computer by means of a wireless link. The results show that there is a decrease in sensitivity of the thin-film silicon piezoresistive sensors when they are attached to the prosthesis, but this decrease does not compromise its monitoring performance. The sensitivity, compared to that of commercial strain gauges, is much larger due to their higher gauge factors (-23.5), when compared to the GFs of commercial sensors (2).

Effect of poling state and morphology of piezoelectric poly(vinylidene fluoride) membranes for skeletal muscle tissue engineering

This work reports on the influence of polarization and morphology of electroactive poly(vinylidene fluoride), PVDF, on the biological response of myoblast cells. Non-poled, ‘‘poled +’’ and “poled-“ -PVDF were prepared in the form of films. Further, random and aligned electrospun -PVDF fiber mats were also prepared. It is demonstrated that negatively charged surfaces improve cell adhesion and proliferation and that the directional growth of the myoblast cells can be achieved by the cell culture on oriented fibers. Therefore, the potential application of electroative materials for muscle regeneration is demonstrated.

PHB-PEO electrospun fiber membranes containing chlorhexidine for drug delivery applications

Fiber meshes of poly(hydroxybutyrate) (PHB) and poly(hydroxybutyrate)/ poly(ethylene oxide) (PHB/PEO) with different concentrations of chlorhexidine (CHX) were prepared by electrospinning, for assessment as a polymer based drug delivery system. The electrospun fibers were characterized at morphological, molecular and mechanical levels. The bactericidal potential of PHB and PHB/PEO electrospun fibers with and without CHX was investigated against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) by disk diffusion susceptibility tests. Electrospun fibers containing CHX exhibited bactericidal activity. PHB/PEO-1%CHX displayed higher CHX release levels and equivalent antibacterial activity when compared to PHB/PEO with 5 and 10 wt% CHX. Bactericidal performance of samples with 1 wt% CHX was assessed by Colony Forming Units (CFU), where a reduction of 100 % and 99.69 % against E. coli and S. aureus were achieved, respectively.

Modifying fish gelatin electrospun membranes for biomedical applications: cross- linking and swelling behavior

Development of suitable membranes is a fundamental requisite for tissue and biomedical engineering applications. This work presents fish gelatin random and aligned electrospun membranes cross-linked with glutaraldehyde (GA). It was observed that the fiber average diameter and the morphology is not influenced by the GA exposure time and presents fibers with an average diameter around 250 nm. Moreover, when the gelatin mats are immersed in a phosphate buffered saline solution (PBS), they can retain as much as 12 times its initial weight of solution almost instantaneously, but the material microstructure of the fiber mats changes from the characteristic fibrous to an almost spherical porous structure. Cross-linked gelatin electrospun fiber mats and films showed a water vapor permeability of 1.37 ± 0.02 and 0.13 ± 0.10 (g.mm)/(m2.h.kPa), respectively. Finally, the processing technique and cross-linking process does not inhibit MC-3T3-E1 cell adhesion. Preliminary cell culture results showed good cell adhesion and proliferation in the cross-linked random and aligned gelatin fiber mats.

Effect of neutralization and cross-linking on the thermal degradation of chitosan electrospun membranes

Thermal degradation of as electrospun chitosan membranes and samples subsequently treated with ethanol and cross-linked with glutaraldehyde (GA) have been studied by thermogravimetry (TG) coupled with an infrared spectrometer (FTIR). The influence of the electrospinning process and cross-linking in the electrospun chitosan thermal stability was evaluated. Up to three degradation steps were observed in the TG data, corresponding to water dehydration reaction at temperatures below 100 ºC, loss of side groups formed between the amine groups of chitosan and trifluoroacetic acid between 150 – 270 ºC and chitosan thermal degradation that starts around 250 ºC and goes up to 400 ºC. The Kissinger model was employed to evaluate the activation energies of the electrospun membranes during isothermal experiments and revealed that thermal degradation activation energy increases for the samples processed by electrospinning and subsequent neutralization and cross-linking treatments with respect to the neat chitosan powder.

Histological alterations in liver and testis of Astyanax aff. bimaculatus caused by acute exposition to zinc

This study investigated the effect of acute exposition to zinc (Zn) on histology of the liver and testes of yellow tail lambari (Astyanax aff. bimaculatus). The exposure consisted of six concentrations of Zn (0, 3, 5, 10, 15, and 20 mg/L) for 96 hours of exposure. Fragments of liver and testis were routinely processed and embedded in plastic resin based on glycol methacrylate. Fragments of bones, muscles, liver and testis were dehydrated and digested to quantify the absorption levels of Zn in the tissue. Acute exposure to concentrations above 10mg/L has produced structural changes in the liver and gonads. The changes found in the liver were vascular congestion; decrease of cellular volume; displacement of the hepatocyte nucleus; necrosis; disarrangement of cordon structure; leukocyte infiltrate and vacuolization. The changes found in the gonads were ruptured cyst, delayed development of germ cells, pyknotic nucleus, cell cluster, displacement of cyst wall and vacuolization. The histological changes observed were compatible with the increasing concentration of zinc in environment, compromising liver and reproductive functions, because there was an increase in relative frequency of hepatocytes and reduced sperm production

Relationship between antropometric, corporal composition and performance in young swimmers, boys and girls

The young athlete is physiologically unique from the adult and must be considered differently. The growth and development of their bones, muscles, nerves, and organs largely dictate their physiological and performance capacities (Bar–Or, 1983; Costill & Wilmore, 1994; Stager et al., 2008). Swimming performance, and the required times to reach a competition (TAC), shoud look for those diferences and should be compatibles with them.

Sinergia extensora do membro superior no movimento de alcance. Capacidade de placing do polegar

Objetivo: avaliar as modificações ocorridas no âmbito da sequência de ativação o da sinergia extensora do MS e na sua influência sobre a capacidade de placing do polegar face à aplicação de um programa de intervenção em fisioterapia. Pretendeu-se também verificar as repercussões ao nível da participação dos indivíduos nas AVD`s. Metodologia: esta série de estudos de casos foi constituída por dois indivíduos com modificações nas componentes neuromotoras de movimento após AVE predominantes no MS. A avaliação dois indivíduos foi realizada em dois momentos PRE e POST separados por um período de intervenção de cerca de quinze semanas. Em cada momento de avaliação foi aplicada a F-MAMR, foi recolhido sinal electromiográfico dos músculos GD, DP, TLONG, TLAT e ABDPOL durante o movimento de alcance e usaram-se seis itens da CIF selecionadas de acordo com as necessidades sentidas. No momento PRE aplicou-se a MMSE para detetar défices cognitivos que interferissem com o processo de avaliação e de intervenção. O programa de intervenção foi individualizado e devidamente ajustado aos indivíduos, procurando que estes mantivessem um papel ativo durante a reabilitação. Esta foi realizada com a frequência de três vezes por semana e cada sessão teve cerca de quarenta e cinco minutos de trabalho ativo. Resultados: encontraram-se modificações na sequência de ativação muscular nos dois indivíduos e entre os indivíduos nos dois momentos de avaliação, nomeadamente no tempo de ativação muscular. O ABDPOL modificou o tempo em que iniciou atividade muscular e passou a recrutar atividade quase simultaneamente ao início do movimento da mão, verificando-se uma influência positiva da sinergia extensora do MS na capacidade de placing do polegar. Verificaram-se resultados positivos no estado sensório-motor do MS e na capacidade do indivíduo em participar em diversas AVD`s selecionadas de acordo com as necessidades. Conclusão: este estudo parece apontar para uma influência positiva nas modificações do nível de atividade da sinergia extensora do MS e na influência desta sobre a capacidade de placing do polegar durante o movimento de alcance, face a um programa de intervenção. Este estudo parece apontar também para uma influência positiva sobre a capacidade do indivíduo em participar em AVD`s selecionadas para a avaliação de acordo com necessidades sentidas.

A influência da hipertonia biomecânica VS neuronal na selecção das estratégias de intervenção em sujeitos com sequelas de acidente vascular encefálico no território da artéria cerebral média

Introdução: Após lesão do SNC o músculo pode perder a sua variabilidade e flexibilidade, tal como se verifica em indivíduos após AVE. A caracterização do tónus muscular tem sido um indicador a ter em atenção para o diagnóstico clínico. As alterações do tónus podem resultar de uma combinação de alterações neurais, como consequência dos processos inerentes à neuroplasticidade e alterações biomecânicas. Objectivo: Verificar quais as modificações no tónus muscular, segundo a escala de Tardieu, após a aplicação de um programa de reabilitação neuromotora baseado no conceito de Bobath em dois indivíduos com sequelas de AVE. Pretendeu-se também verificar as repercussões nas actividades funcionais. Participantes e métodos: Foram seleccionados dois indivíduos e aplicado um programa de reabilitação, durante onze semanas, e avaliados em dois momentos, antes da intervenção (PRE) e após a intervenção (APÓS). Aplicaram-se vários instrumentos de avaliação, nomeadamente a escala de Tardieu. O programa de reabilitação realizado baseou-se no conceito de Bobath. Resultados: Na escala de Tardieu, foi comum aos dois indivíduos melhorias a nível da qualidade de reacção muscular. Ambos os indivíduos apresentaram melhorias no controlo postural e equilíbrio, que se evidenciaram na CIF. Conclusão: Foi possível observar modificações no tónus muscular após aplicação de um programa de reabilitação e, consequentemente modificações na distribuição da carga na base de suporte, no alinhamento das estruturas articulares e musculares e na marcha. Ao longo da intervenção, observaram-se repercussões positivas em ambos os indivíduos, permitindo a estes realizar as AVDs com menor dificuldade

Iniciação da marcha em indivíduos com AVE. Sequência de ativação muscular do tibial anterior e solear

Introdução: A iniciação da marcha, enquanto tarefa motora complexa que consiste na transição de uma postura mantida pelo apoio simultâneo dos dois membros inferiores para um equilíbrio dinâmico, permitindo a progressão anterior do corpo, constitui um exemplo que implica uma correta sequência de ativação muscular. Objetivos: Verificar a modificação da fase de iniciação da marcha face à aplicação de um programa de recuperação funcional, analisando a sequência de ativação dos músculos tibial anterior e solear. Registar as repercussões funcionais na participação nas diferentes atividades da vida diária, em contexto padronizado e social. Metodologia: Nos dois participantes em estudo foi realizada uma avaliação antes e após um programa de intervenção, segundo a abordagem do Conceito de Bobath, através da Classificação Internacional de Funcionalidade, Incapacidade e Saúde, da Fugl Meyer Assessment of Sensorymotor Recovery After Stroke, electromiografia e plataforma de forças. Resultados: Após a aplicação do programa de recuperação funcional, verificaram-se alterações na sequência de ativação do tibial anterior e solear. O músculo tibial anterior passou a ser o primeiro a ser recrutado nesta sequência. Conclusão: Foi possível verificar modificações durante a fase de iniciação da marcha, face a um programa de recuperação funcional, em que a sequência de ativação do tibial anterior e solear, tendencialmente, se assemelharam ao comportamento em indivíduos saudáveis, repercutindo-se numa melhoria funcional na participação nas atividades da vida diária.