Employability management needs analysis and the ICT sector in Europe:the case of small and medium-sized enterprises

The purpose of this paper is to deal with the outcomes of a so-called “employability management needs analysis” that is meant to provide more insight into current employability management activities and its possible benefits for Information and Communication Technology (ICT) professionals working in Small- and Medium-sized enterprises (SMEs) throughout Europe. A considerable series of interviews (N=107) were conducted with managers in SMEs in seven European countries, including Germany, Greece, Italy, the Netherlands, Norway, Poland, and the UK. A semi-structured interview protocol was used during the interviews to cover three issues: employability (13 items), ageing (8 items), and future developments and requirements (13 items). Analysis of all final interview transcriptions was at a national level using an elaborate common coding scheme. Although an interest in employability emerged, actual policy and action lagged behind. The recession in the ICT sector at the time of the investigation and the developmental stage of the sector in each participating country appeared connected. Ageing was not seen as a major issue in the ICT sector because managers considered ICT to be a relatively young sector. There appeared to be a serious lack of investment in the development of expertise of ICT professionals. Generalization of the results to large organizations in the ICT sector should be made with caution. The interview protocol developed is of value for further research and complements survey research undertaken within the employability field of study. It can be concluded that proactive HRM (Human Resource Management) policies and strategies are essential, even in times of economic downturn. Employability management activities are especially important in the light of current career issues. The study advances knowledge regarding HRM practices adopted by SMEs in the ICT sector, especially as there is a gap in knowledge about career development issues in that particular sector.

Acoustics of small rooms intended for use as studios

The aims of the work reported in this thesis are: (1) To investigate the application of a Wave Analysis Approach in the study of the acoustics of small rooms where the conditions for a Geometrical Statistical Analysis are not valid.

Elasto-plastic impact of fine particles and fragmentation of small agglomerates

Surface deposition of dense aerosol particles is of major concern in the nuclear industry for safety assessment. This study presents theoretical investigations and computer simulations of single gas-born U3O8 particles impacting with the in-reactor surface and the fragmentation of small agglomerates. A theoretical model for elasto-plastic spheres has been developed and used to analyse the force-displacement and force-time relationships. The impulse equations, based on Newton's second law, are applied to govern the tangential bouncing behaviour. The theoretical model is then incorporated into the Distinct Element Method code TRUBAL in order to perform computer simulated tests of particle collisions. A comparison of simulated results with both theoretical predictions and experimental measurements is provided. For oblique impacts, the results in terms of the force-displacement relationship, coefficients of restitution, trajectory of the impacting particle, and distribution of kinetic energy and work done during the process of impact are presented. The effects of Poisson's ratio, friction, plastic deformation and initial particle rotation on the bouncing behaviour are also discussed. In the presence of adhesion an elasto-plastic collision model, which is an extension to the JKR theory, is developed. Based on an energy balance equation the critical sticking velocity is obtained. For oblique collisions computer simulated results are used to establish a set of criteria determining whether or not the particle bounces off the target plate. For impact velocities above the critical sticking value, computer simulated results for the coefficients of restitution and rebound angles of the particle are presented. Computer simulations of fracture/fragmentation resulting from agglomerate-wall impact have also been performed, where two randomly generated agglomerates (one monodisperse, the other polydisperse), each consisting of 50 primary particles are used. The effects of impact angle, local structural arrangements close to the impact point, and plastic deformation at the contacts on agglomerate damage are examined. The simulated results show a significant difference in agglomerate strength between the two assemblies. The computer data also shows that agglomerate damage resulting from an oblique impact is determined by the normal velocity component rather than the impact speed.

Systematic identification of small molecule adjuvants

Introduction: Adjuvants potentiate immune responses, reducing the amount and dosing frequency of antigen required for inducing protective immunity. Adjuvants are of special importance when considering subunit, epitope-based or more unusual vaccine formulations lacking significant innate immunogenicity. While numerous adjuvants are known, only a few are licensed for human use; principally alum, and squalene-based oil-in-water adjuvants. Alum, the most commonly used, is suboptimal. There are many varieties of adjuvant: proteins, oligonucleotides, drug-like small molecules and liposome-based delivery systems with intrinsic adjuvant activity being perhaps the most prominent. Areas covered: This article focuses on small molecules acting as adjuvants, with the author reviewing their current status while highlighting their potential for systematic discovery and rational optimisation. Known small molecule adjuvants (SMAs) can be synthetically complex natural products, small oligonucleotides or drug-like synthetic molecules. The author provides examples of each class, discussing adjuvant mechanisms relevant to SMAs, and exploring the high-throughput discovery of SMAs. Expert opinion: SMAs, particularly synthetic drug-like adjuvants, are amenable to the plethora of drug-discovery techniques able to optimise the properties of biologically active small molecules. These range from laborious synthetic modifications to modern, rational, effort-efficient computational approaches, such as QSAR and structure-based drug design. In principal, any property or characteristic can thus be designed in or out of compounds, allowing us to tailor SMAs to specific biological functions, such as targeting specific cells or pathways, in turn affording the power to tailor SMAs to better address different diseases.

Growth expectations and financial performance of small businesses:evidence from Latvia

By applying regulatory focus theory, this paper investigates the impact of both initial confidence and of exactness of growth expectations on subsequent financial performance of the small firms. Drawing on the unique data set based on the repeated survey design, we make one of the first attempts to explore the complexity of this relationship empirically. Overall the findings suggest that controlling for other relevant factors, including actual growth, the entrepreneurs having higher growth expectations perform significantly better later on in terms of profitability. In addition, education has a strong modifying effect: the impact of high growth expectations on subsequent profit performance is stronger for entrepreneurs with lower level of education.

Internationalization of small and medium sized UK manufacturing enterprises:technology and knowledge transfer perspective

This dissertation examines internationalisation of small and medium sized enterprises. There has been a journey to achieve this. The research has started as an action research as Teaching Company Scheme Associate. This has been done in two research cycles, which investigated factors for successful internationalisation of a small and medium sized UK manufacturing enterprise. This has revealed that successful internationalisation requires good technology and knowledge transfer to the new operations. The action research is followed by a survey that has been conducted within UK manufacturing companies. The data collected was analysed under three models: entry mode selection, role of factory and level of internationalisation. The first two models explain two major aspects of internationalisation decision. The last is showing what makes successful internationalising small and medium sized companies. These models provided several important results. The small and medium sized enterprise internationalisation is harder to achieve because most of these organisations do not have experience in technology and knowledge transfer. The success of internationalisation depends on the success of the transfer. This is achieved through employee ownership of the new knowledge. There are many factors affecting this result such as the network relationships such as trust, control and commitment and cognitive distance between two organisations. The last is a product of the difference between prior knowledge and the required level of knowledge. The entry mode and role of factory are decided through these factors while the level of internationalisation can only be explained by absorptive capacity of the recipient organisation and the technology transfer ability of the host organisation.

Decision support for lifecycle planning and risk management of small-scale biomass combined heat and power (bCHP) projects in the UK

Biomass is projected to account for approximately half of the new energy production required to achieve the 2020 primary energy target in the UK. Combined heat and power (CHP) bioenergy systems are not only a highly efficient method of energy conversion, at smaller-scales a significant proportion of the heat produced can be effectively utilised for hot water, space heating or industrial heating purposes. However, there are many barriers to project development and this has greatly inhibited deployment in the UK. Project viability is highly subjective to changes in policy, regulation, the finance market and the low cost incumbent; a high carbon centralised energy system. Unidentified or unmitigated barriers occurring during the project lifecycle may not only negatively impact on the project but could ultimately lead to project failure. The research develops a decision support system (DSS) for small-scale (500 kWe to 10 MWe) biomass combustion CHP project development and risk management in the early stages of a potential project’s lifecycle. By supporting developers in the early stages of project development with financial, scheduling and risk management analysis, the research aims to reduce the barriers identified and streamline decision-making. A fuzzy methodology is also applied throughout the developed DSS to support developers in handling the uncertain or approximate information often held at the early stages of the project lifecycle. The DSS is applied to a case study of a recently failed (2011) small-scale biomass CHP project to demonstrate its applicability and benefits. The application highlights that the proposed development within the case study was not viable. Moreover, further analysis of the possible barriers with the DSS confirmed that some possible modifications to be project could have improved this, such as a possible change of feedstock to a waste or residue, addressing the unnecessary land lease cost or by increasing heat utilisation onsite. This analysis is further supported by a practitioner evaluation survey that confirms the research contribution and objectives are achieved.

The social and entrepreneurial orientation of small businesses:mutually exclusive or reinforcing? (INTERACTIVE PAPER)

Principal Topic - As argued by Acs and Phillips (2002) it is not only “the creation of wealth (entrepreneurship)” but also “the reconstitution of wealth (philanthropy)”, which has been essential for the inherent dynamism of the market economy (Ibid., p.201). However, we understand little about the entrepreneurship – philanthropy link in institutional contexts that differ from that of leading developed market economies. Accordingly our research agenda is to investigate the entrepreneurship-philanthropy nexus in a very different context of Lithuania, a country which shed a command economy system twenty years ago. In particular, we are interested to see if the cluster of attitudes and strategies of firms conducive to entrepreneurship, i.e. their entrepreneurial orientation (Covin & Slevin, 1989), is consistent or contradictory with philanthropy? In other words, is philanthropy strongly associated with some core components of entrepreneurship, or is it an entrepreneurial anomaly, relying on a minority of economic actors that provide important links with wider, non-economic communities. Method - The study draws on 270 randomly sampled, phone interviews with owners and ownermanagers of small and medium-sized enterprises (SMEs), i.e. firms with less than 250 employees. Interviews were conducted in Lithuania during January- March, 2008. Our results are based on confirmatory factor analysis combined with regression analysis. Results and Implications - Despite the legacy of informal institutions that is conducive neither to entrepreneurship nor to civic society, we found that by now, (i) the companies that score highest on entrepreneurial orientation construct, (ii) that perform best and those (iii) that have foreign owners are also most likely to declare their commitment to philanthropy. Our findings that most entrepreneurial firms are also involved in philanthropy are consistent with the perspective on the pattern of development in an entrepreneurial economy as outlined by Acs and Phillips (2002).

Techonology usage in the supply chain:the case of small 3PLs

In today's supply chain management practices, a successful strategy depends increasingly on the performance of third party logistics (3PLs) providers as they play a key integrative role linking the different supply chain elements more effectively. Information and communications technology (ICT) has become an important element of 3PL competitive capability as it enables higher levels of supply chain integration. Recent industry developments have widened the technological gap between large and small 3PLs. This is critical particularly for those markets populated by a large number of small 3PLs such as the Italian logistics industry. The purpose of this paper is to provide an overview of ICT adoption in small logistics service providers. The focus of the study is the Italian 3PL market. The methodology adopted in this paper is based on the action research framework and it is a combination of theoretical analysis and empirical findings (focus groups and surveys). Firstly, a literature review on ICT dissemination in the international and Italian 3PL industry has been carried out. Then, a field survey has been developed preceded by two focus groups. The empirical investigation examined a sample of 153 small Italian 3PLs on the base of a definition and taxonomy proposed by the authors. The results provide a useful technological profile of the surveyed companies, as well as an analysis of the role of ICT in customising services and of the factors influencing ICT adoption. To give a more robust scientific justification of the survey results, it would be useful to carry out an additional large-scale analysis including other countries with a high presence of small logistics service companies. Furthermore, a complementary case-study analysis would be of help in defining the role of specific factors in different types of 3PL. Further investigations in this field are needed to better understand innovation paths, and how ICT can improve the competitive capabilities of 3PLs and of the wider supply chain. Managers of small 3PLs can use the findings to set-up guidelines for improving a company's technology innovation. Technology vendors can use the findings to better market their service/product into the small logistics service provider segment. Despite the fact that much has been written about the dissemination of ICT, there is still a shortage of research in the field of small 3PLs with little empirical investigation into the usage of ICT by small 3PLs. This paper provides a contribution to filling this void and suggests some possible research directions.

A barrier and techno-economic analysis of small-scale bCHP (biomass combined heat and power) schemes in the UK

bCHP (Biomass combined heat and power) systems are highly efficient at smaller-scales when a significant proportion of the heat produced can be effectively utilised for hot water, space heating or industrial heating purposes. However, there are many barriers to project development and this has greatly inhibited deployment in the UK. Project viability is highly subjective to changes in policy, regulation, the finance market and the low cost fossil fuel incumbent. The paper reviews the barriers to small-scale bCHP project development in the UK along with a case study of a failed 1.5MWel bCHP scheme. The paper offers possible explanations for the project's failure and suggests adaptations to improve the project resilience. Analysis of the project's: capital structuring contract length and bankability; feedstock type and price uncertainty, and plant oversizing highlight the negative impact of the existing project barriers on project development. The research paper concludes with a discussion on the effects of these barriers on the case study project and this industry more generally. A greater understanding of the techno-economic effects of some barriers for small-scale bCHP schemes is demonstrated within this paper, along with some methods for improving the attractiveness and resilience of projects of this kind. © 2014 Elsevier Ltd.

Resilience and adaptation of small and medium-sized enterprises to flood risk

Purpose – The UK has experienced a number of flood events in recent years, and the intensity and frequency of such events are forecast to further increase in future due to changing climatic conditions. Accordingly, enhancing the resilience of small and medium-sized enterprises (SMEs) – which form an important segment in a society – to flood risk, has emerged as an important issue. However, SMEs often tend to underestimate the risk of flooding which tends to have a low priority in their business agenda. The purpose of this paper is to undertake an investigation of adaptation to the risk of flooding considering community-level measures, individual-level property protection, and business continuity and resilience measures. Design/methodology/approach – A total of four short case studies were conducted among SMEs to identify their response to flood risk, and what measures have been undertaken to manage the risk of flooding. Findings – It was observed that SMEs have implemented different property-level protection measures and generic business continuity/risk management measures, based on their requirements, to achieve a desired level of protection. Practical implications – SMEs are likely to positively respond to property-level adaptation following a post-flood situation. It is important that information such as costs/benefits of such measures and different options available are made accessible to SMEs affected by a flood event. Social implications – Implementation of property-level adaptation measures will contribute towards the long term adaptation of the existing building stock to changing climatic conditions. Originality/value – The paper contributes towards policy making on flood risk adaptation and SME decision making, and informs policy makers and practitioners.