Morphological and fecundity traits of Culex mosquitoes caught in gravid traps in urban and rural Berkshire, UK

Culex pipiens s.l. is one of the primary vectors of West Nile Virus in the USA and Continental Europe. The seasonal abundance and eco-behavioural characteristics of the typical form, Cx. pipiens pipiens, make it a key putative vector in Britain. Surveillance of Culex larvae and adults is essential to detect any changes to spatial and seasonal activity or morphological traits that may increase the risk of disease transmission. Here we report the use of the modified Reiter gravid box trap, which is commonly used in the USA but scarcely used in the UK, to assess its suitability as a tool for British female Culex mosquito surveillance. Trapping was carried out at 110 sites in urban and rural gardens in Berkshire in May, July and September 2013. We tested if reproductively active adult female Culex are more abundant in urban than rural gardens and if wing characteristic traits and egg raft size are influenced by location and seasonal variations. Gravid traps were highly selective for Culex mosquitoes, on average catching significantly more per trap in urban gardens (32.4 ± 6.2) than rural gardens (19.3 ± 4.0) and more in July than in May or September. The majority of females were caught alive in a good condition. Wing lengths were measured as an indicator of size. Females flying in September were significantly smaller than females in May or July. Further non-significant differences in morphology and fecundity between urban and rural populations were found that should be explored further across the seasons.

Relative importance of transpiration rate and leaf morphological traits for the regulation of leaf temperature

Urban greening solutions such as green roofs help improve residents’ thermal comfort and building insulation. However, not all plants provide the same level of cooling. This is partially due to differences in plant structure and function, including different mechanisms that plants employ to regulate leaf temperature. Ranking of multiple leaf/plant traits involved in the regulation of leaf temperature (and, consequently, plants’ cooling ‘service’) is not well understood. We therefore investigated the relative importance of water loss, leaf colour, thickness and extent of pubescence for the regulation of leaf temperature, in the context of species for semi-extensive green roofs. Leaf temperature were measured with an infrared imaging camera in a range of contrasting genotypes within three plant genera (Heuchera, Salvia and Sempervivum). In three glasshouse experiments (each evaluating three or four genotypes of each genera) we varied water availability to the plants and assessed how leaf temperature altered depending on water loss and specific leaf traits. Greatest reductions in leaf temperature were closely associated with higher water loss. Additionally, in non-succulents (Heuchera, Salvia), lighter leaf colour and longer hair length (on pubescent leaves) both contributed to reduced leaf temperature. However, in succulent Sempervivum, colour/pubescence made no significant contribution; leaf thickness and water loss rate were the key regulating factors. We propose that this can lead to different plant types having significantly different potentials for cooling. We suggest that maintaining transpirational water loss by sustainable irrigation and selecting urban plants with favourable morphological traits is the key to maximising thermal benefits provided by applications such as green roofs.

An approximate dynamic programming approach for improving accuracy of lossy data compression by Bloom filters

Bloom filters are a data structure for storing data in a compressed form. They offer excellent space and time efficiency at the cost of some loss of accuracy (so-called lossy compression). This work presents a yes-no Bloom filter, which as a data structure consisting of two parts: the yes-filter which is a standard Bloom filter and the no-filter which is another Bloom filter whose purpose is to represent those objects that were recognised incorrectly by the yes-filter (that is, to recognise the false positives of the yes-filter). By querying the no-filter after an object has been recognised by the yes-filter, we get a chance of rejecting it, which improves the accuracy of data recognition in comparison with the standard Bloom filter of the same total length. A further increase in accuracy is possible if one chooses objects to include in the no-filter so that the no-filter recognises as many as possible false positives but no true positives, thus producing the most accurate yes-no Bloom filter among all yes-no Bloom filters. This paper studies how optimization techniques can be used to maximize the number of false positives recognised by the no-filter, with the constraint being that it should recognise no true positives. To achieve this aim, an Integer Linear Program (ILP) is proposed for the optimal selection of false positives. In practice the problem size is normally large leading to intractable optimal solution. Considering the similarity of the ILP with the Multidimensional Knapsack Problem, an Approximate Dynamic Programming (ADP) model is developed making use of a reduced ILP for the value function approximation. Numerical results show the ADP model works best comparing with a number of heuristics as well as the CPLEX built-in solver (B&B), and this is what can be recommended for use in yes-no Bloom filters. In a wider context of the study of lossy compression algorithms, our researchis an example showing how the arsenal of optimization methods can be applied to improving the accuracy of compressed data.

SEM Study of Apical Morphological Alterations in Primary Teeth with Vital and Necrotic Pulps

This study evaluated, by SEM, the morphology of human primary teeth roots. Twenty-four teeth were divided into 3 groups: pulp vitality (group I) and pulp necrosis without (group II) and with apical periodontitis (group III). Roots were analyzed by the presence of periodontal ligament (PDL) fibers and resorption areas. In groups I and II, presence of PDL fibers and absence of resorption were observed in all cases (100%), while all specimens (100%) of group III showed no PDL fibers and resorption areas. In conclusion, there are morphological differences in the apical region of primary teeth with different pulpal and periapical pathologies.

Influence of energy and pulse repetition rate of Er : YAG laser on enamel ablation ability and morphological analysis of the laser-irradiated surface

Objective: To assess the influence of energy and pulse repetition rate of Er:YAG laser on the enamel ablation ability and substrate morphology. Methods: Fifteen crowns of molars were sectioned in four fragments, providing 60 samples, which were ground to flatten the enamel surface. The initial mass was obtained by weighing the fragments. The specimens were hydrated for I h, fixed, and a 3-mm-diameter area was delimited. Twelve groups were randomly formed according to the combination of laser energies (200, 250, 300, or 350 mJ) and pulse repetition rates (2, 3, or 4 Hz). The final mass was obtained and mass loss was calculated by the difference between the initial and final mass. The specimens were prepared for SEM. Data were submitted to ANOVA and Scheffe test. Results: The 4 Hz frequency resulted in higher mass loss and was statistically different from 2 and 3 Hz (p < 0.05). The increase of frequency produced more melted areas, cracks, and unselective and deeper ablation. The 350 mJ energy promoted greater mass loss, similar to 300 mJ. Conclusions: The pulse repetition rate influenced more intensively the mass loss and morphological alteration. Among the tested parameters, 350 mJ/3 Hz improved the ability of enamel ablation with less surface morphological alterations. (C) 2007 Wiley Periodicals, Inc. J Biomed Mater Res.

Morphological differentiation between S. mutans and S. sobrinus on modified SB-20 culture medium

Due to the major role of Streptococcus mutans and Streptococcus sobrinus in the etiology of dental caries, it is important to use culture media that allow for differentiating these bacterial species. The aim of this study was to evaluate the suitability of a modified SB-20 culture medium (SB-20M) for the isolation and morphological differentiation of S. mutans and S. sobrinus, compared to biochemical identification (biotyping). Saliva samples were collected using the spatula method from 145 children, seeded on plates containing the SB-20M, in which sucrose was replaced by coarse granular cane sugar, and incubated in microaerophilia at 37 degrees C during 72 h. Identification of the microorganisms was performed under stereomicroscopy based on colony morphology of 4904 colonies. The morphological identification was examined by biochemical tests of 94 randomly selected colonies with the macroscopic characteristic of S. mutans and S. sobrinus using sugar fermentation, resistance to bacitracin and production of hydrogen peroxide. There was no statistically significant difference (p> 0.05) between morphological identification in the SB-20M medium and biochemical identification (biotyping). Biotyping confirmed that S. mutans and S. sobrinus colonies were correctly characterized in the SB-20M in 95.8% and 95.5% of the cases, respectively. Of the mutans streptococci detected in the children 98% were S. mutans and 2% S. sobrinus. The SB-20M medium is reliable for detection and direct morphological identification of S. mutans and S. sobrinus. (C) 2010 Elsevier GmbH. All rights reserved.

Chemical and Morphological Features of Dental Composite Resin: Influence of Light Curing Units and Immersion Media

Aims: The study evaluated the influence of light curing units and immersion media on superficial morphology and chemistry of the nanofilled composite resin Supreme XT (3M) through the EDX analysis and SEM evaluation. Light curing units with different power densities and mode of application used were XL 3000 (480 mW/cm(2)), Jet Lite 4000 Plus (1230mW/cm(2)), and Ultralume Led 5 (790 mW/cm(2)) and immersion media were artificial saliva, Coke(R), tea and coffee, totaling 12 experimental groups. Specimens (10 mm X 2 mm) were immersed in each respective Solution for 5 min, three times a day, during 60 days and stored in artificial saliva at 37 degrees C +/- 1 degrees C between immersion periods. Topography and chemical analysis was qualitative. Findings: Groups immersed in artificial saliva, showed homogeneous degradation of matrix and deposition of calcium at the material surface. Regarding coffee, there was a reasonable chemical degradation with loss of load particles and deposition of ions. For tea, superficial degradation occurred in specific areas with deposition of calcium, carbon. potassium and phosphorus. For Coke(R), excessive matrix degradation and loss of load particles with deposition of calcium, sodium, and potassium. Conclusion: Light curing units did not influence the superficial morphology of composite resin tested, but the immersion beverages did. Coke(R) affected material`s surface more than did the other tested drinks. Microsc. Res. Tech. 73:176-181, 2010. (c) 2009 Wiley-Liss Inc.

Resurrection of Two Species From Synonymy of Anopheles (Nyssorhynchus) strodei Root, and Characterization of a Distinct Morphological Form From the Strodei Complex (Diptera: Culicidae)

Anopheles albertoi Unti and Anopheles arthuri Unti are revived from the synonymy with Anopheles strodei Root, and a distinct morphological form (designated in this study as Anopheles CP Form) from the Strodei Complex of Anopheles (Nyssorhynchus) is characterized. The male genitalia of An. arthuri and An. albertoi are described and illustrated for the first time. An. strodei, An. arthuri, and An. albertoi were first distinguished based on scanning electron microphotos of the eggs, and then each egg type was associated with diagnostic characters of the male genitalia. Identification of Anopheles CP Form was based on morphological characters of the male genitalia, characterized and illustrated in this study. Molecular phylogenetic analysis was most clear when an outgroup was not included, in which case using the nuclear white gene, or the white gene in combination with the mitochondrial cytochrome c oxidase subunit I (COI) gene, clearly separated these four taxa. When Anopheles quadrimaculatus Say and Anopheles stephensi Liston were included as an outgroup, combined white and COI data resolved An. strodei and An. albertoi, whereas An. arthuri was not well resolved. The single sequence of Anopheles CP Form was recovered well separated from other groups in all analyses.

Morphological properties of superclusters of galaxies

We studied superclusters of galaxies in a volume-limited sample extracted from the Sloan Digital Sky Survey Data Release 7 and from mock catalogues based on a semi-analytical model of galaxy evolution in the Millennium Simulation. A density field method was applied to a sample of galaxies brighter than M(r) = -21+5 log h(100) to identify superclusters, taking into account selection and boundary effects. In order to evaluate the influence of the threshold density, we have chosen two thresholds: the first maximizes the number of objects (D1) and the second constrains the maximum supercluster size to similar to 120 h(-1) Mpc (D2). We have performed a morphological analysis, using Minkowski Functionals, based on a parameter, which increases monotonically from filaments to pancakes. An anticorrelation was found between supercluster richness (and total luminosity or size) and the morphological parameter, indicating that filamentary structures tend to be richer, larger and more luminous than pancakes in both observed and mock catalogues. We have also used the mock samples to compare supercluster morphologies identified in position and velocity spaces, concluding that our morphological classification is not biased by the peculiar velocities. Monte Carlo simulations designed to investigate the reliability of our results with respect to random fluctuations show that these results are robust. Our analysis indicates that filaments and pancakes present different luminosity and size distributions.

Morphological architecture of Actinocephalus (Koern.) sano (Eriocaulaceae-Poales)

Actinocephalus exhibits perhaps more diversity in habit than any other genus of Eriocaulaceae. This variation is largely a result of differences in the arrangement of the paraclades. Based on the analysis of stem architecture of all 25 species of Actinocephalus, the following patterns were established: (1) leaf rosette, with no elongated axis, instead the axillary paraclades originating directly from the short aerial stem, (2) rosette axis continuing into an elongated axis with spirally arranged paraclades, (3) an elongated axis originating from a rhizome, with ramified paraclades, and (4) an elongated axis originating from a short aerial stem, with paraclades arranged in a subwhorl. The elongated axis exhibits indeterminate growth only in pattern 4. Patterns 3 and 4 are found exclusively in Actinocephalus; pattern I occurs in many other genera of Eriocaulaceae, while pattern 2 is also found in Syngonanthus and Paepalanthus. Anatomically, each stem structure (i.e., paraclade, elongated axis, short aerial stem, rhizome) is thickened in a distinctive way and this can be used to distinguish them. Specifically, elongated axes and paraclades lack thickening, thickening of short aerial stems results from the primary thickening meristem and/or the secondary thickening meristem. Thickening of rhizomes results from the activity of the primary thickening meristem. (c) 2008 Elsevier GmbH. All rights reserved.

Life history, morphological variability and growth rates of the life phases of Gracilaria tenuistipitata (Rhodophyta: Gracilariales) in vitro

Gracilaria tenuistipitata, a species of commercial interest, is becoming a model organism for studies on red algal physiology and molecular biology as it can be grown easily in vitro under a broad range of conditions. Most of the experiments carried out around the world have been based on a tetrasporophytic clone isolated in our laboratory from a specimen collected in China. Here we describe the life history of this species, give anatomic details of the reproductive structures, illustrate the morphological variability of tetraspore progeny and compare the growth rate of gametophytic and sporophytic thalli. Tetrasporophytic branches showed higher growth rates than gametophytic branches.

The occurrence of Laurencia marilzae (Ceramiales, Rhodophyta) in Brazil based on morphological and molecular data

Laurencia marilzae is recorded for the first time from the western Atlantic Ocean; it was found in Laje de Santos Marine State Park, Sao Paulo, southeastern Brazil. The specimens were collected in the rocky subtidal zone from 7 to 15 m depth. The most distinctive characteristic of this species is the presence of corps en cerise in all cells of the thallus, including cortex, medulla, and trichoblasts. The phylogenetic position of the species was inferred by analysis of the chloroplast-encoded rbcL gene sequences from 43 taxa, using two other rhodomelacean taxa and two members of the Ceramiaceae as outgroups. Within the Laurencia assemblage, L. marilzae from Brazil and from the Canary Islands ( type locality) formed a distinctive lineage sister to all other Laurencia species analyzed. Male plants are described for the first time. This study expands the geographical distribution of L. marilzae to the western Atlantic Ocean.

Palisada flagellifera (Ceramiales, Rhodophyta) from the Canary Islands, Spain: a new record for the eastern Atlantic Ocean based on morphological and molecular evidence

Palisada flagellifera (Ceramiales, Rhodophyta) is recorded for the first time in the eastern Atlantic Ocean off Tenerife, La Gomera, La Palma and Fuerteventura, Canary Islands, Spain. The specimens were collected in 2006-2009 growing from the lower intertidal to subtidal zones to 2 m depth at sites exposed to wave action. The species possesses a palisade-like arrangement of cortical cells in cross section, lacks secondary pit connections between them, and has tetrasporangia produced by three fertile pericentral cells (the third and the fourth additional and the second that becomes fertile), and a right-angled arrangement of tetrasporangia. Gametangia were not observed. The phylogenetic relationships were inferred by analyses of the chloroplast-encoded rbcL gene sequences from 46 taxa. The Canarian and Brazilian P. flagellifera specimens formed a highly supported clade with a low level of genetic variation in the rbcL sequences (0.02-0.04%), confirming that they are the same taxonomic entity. This study expands the geographical distribution of P. flagellifera to the eastern Atlantic Ocean.

Evidence for the conspecificity of Palisada papillosa with P. perforata (Ceramiales, Rhodophyta) from the western and eastern Atlantic Ocean on the basis of morphological and molecular analyses

Morphological and molecular studies were carried out on Palisada papillosa and P. perforata from the Canary Islands (type locality of P. perforata), Mexico and Brazil. The two species have been distinguished by features of their external morphology such as size and degree of compactness of the thalli, presence or absence of arcuate branches, branching pattern and basal system. A detailed morphological comparison between these taxa showed that none of the vegetative anatomical or reproductive characters was sufficient to separate these species. The presence or absence of cortical cells in a palisade-like arrangement, also previously used to. distinguish these species, is not applicable. The species present all characters typical of the genus, and both share production of the first pericentral cell underneath the basal cell of the trichoblast, production of two fertile pericentral cells (the second and the third additional, the first remaining sterile), spermatangial branches produced from one of two laterals on the suprabasal cell of trichoblasts, and the procarpbearing segment with four pericentral cells. Details of the procarp are described for the species for the first time. The phylogenetic position of these species was inferred by analysis of the chloroplast-encoded rbcL gene sequences from 39 taxa, using one other Rhodomelacean taxon and two Ceramiaceae as outgroups. Relationships within the clade formed by P. papillosa and P. perforata have not been resolved due to the low level of genetic variation in their rbcL sequences (0-0.4%). Considering this and the morphological similarities, we conclude that P. papillosa is a taxonomic synonym of P. perforata. The phylogenetic analyses also supported the nomenclatural transfer of two species of Chondrophycus to Palisada, namely, P. patentiramea (Montagne) Cassano, Senties, Gil-Rodriguez & M.T. Fujii comb. nov. and P. thuyoides (Kutzing) Cassano, Senties, Gil-Rodriguez & M.T. Fujii comb. nov.