Verifica radioprotezionistica con tecniche Monte Carlo del bunker per radioterapia dell' ASMN-IRCCS di Reggio Emilia

Conoscere con dettaglio il campo di radiazione che si genera nell'utilizzo di un acceleratore lineare di elettroni durante una seduta di radioterapia è essenziale sia per i pazienti sia per gli operatori. L'utilizzo del codice Monte Carlo MCNPX 2.7.0 permette di stimare dati dosimetrici dettagliati in zone dove può essere complicato effettuare misurazioni.Lo scopo di questo lavoro è indagare il comportamento del fascio fotonico prodotto nel bunker di radioterapia dell'ASMN-IRCCS di Reggio Emilia, valutando con precisione in particolare la produzione di fotoneutroni secondari. L'obiettivo è la verifica dell'efficacia delle barriere offerte dalla struttura tenendo in considerazione anche il canale di penetrazione degli impianti di servizio che costituisce un punto di fuga per le radiazioni.

Realizzazione e convalida del modello Monte Carlo di un calibratore di attività per radiofarmaci

I calibratori di attività sono strumenti molto importanti per la pratica, diagnostica e terapeutica, in medicina nucleare, perché permettono di associare ad un radiofarmaco una misura accurata dell’attività dell’isotopo in esso contenuto; questo è fondamentale in quanto l’attività della sorgente esprime la quantità di farmaco somministrata al paziente. In questo lavoro è stato sviluppato il modello Monte Carlo di un calibratore di attività ampiamente diffuso nei laboratori di radiofarmacia (Capintec CRC-15), utilizzando il codice Monte Carlo FLUKA. Per realizzare il modello si è posta estrema attenzione nel riprodurre al meglio tutti i dettagli delle componenti geometriche della camera e dei campioni delle sorgenti radioattive utilizzati. A tale scopo, la camera di ionizzazione di un calibratore è stata studiata mediante imaging TAC. Un’analisi preliminare è stata eseguita valutando il confronto tra l’andamento sperimentale dell’efficienza della camera in funzione dell’energia dei fotoni incidenti e quello ottenuto in simulazione. In seguito si è proceduto con la validazione: si sono studiati a questo proposito la risposta del calibratore in funzione dell’altezza della sorgente e i confronti tra i fattori relativi (rispetto ad una sorgente certificata di 137Cs) e le misure di confronto sono state eseguite con diverse sorgenti certificate di 133Ba, 68Ge-68Ga, 177Lu ed uno standard tarato internamente di 99mTc. In tale modo, si è ricoperto l'intero campo di interesse dei principali radionuclidi impiegati nelle applicazioni diagnostiche e terapeutiche di Medicina Nucleare. Il modello sviluppato rappresenta un importante risultato per l’eventuale determinazione di nuovi fattori di calibrazione o per un futuro studio relativo all’ottimizzazione della risposta del calibratore.

Ricostruzione di segnali multipli del rivelatore a tempo di volo (ToF) di ALICE: confronto fra dati e Monte Carlo

La fisica delle collisioni ad alte energie è, ad oggi, uno dei campi di ricerca più interessante per la verifica di modelli teorici che spieghino la nascita e la formazione dell'universo in cui viviamo. In quest'ottica lavorano esperimenti presso i più importanti acceleratori di particelle: tra questi anche l'esperimento ALICE, presso il Large Hadron Collider LHC del CERN di Ginevra. Il suo scopo principale è quello di verificare e ampliare l'insieme delle prove sperimentali alla base sull'esistenza di un nuovo stato della materia: il Quark Gluon Plasma. La presenza della transizione di fase della materia adronica ordinaria a QGP era stata teorizzata da diversi studi termodinamici e da calcoli di QCD su reticolo: in particolare si prevedeva l'esistenza di uno stato della materia in cui i quark sono deconfinati. Il QGP è dunque un plasma colorato e densissimo di quark e gluoni, liberi di interagire tra loro. Queste condizioni sarebbero state quelle dell'universo primordiale, circa 1µs dopo il Big Bang: a seguito di una transizione di fase, si sarebbe poi formata tutta la materia adronica ordinaria. Per riprodurre le condizioni necessarie alla formazione del QGP occorrono collisioni ad energie ultrarelativistiche come quelle prodotte, negli ultimi anni, dall'acceleratore LHC. Uno dei principali rivelatori dedicati all'identificazione di particelle in ALICE è il sistema a tempo di volo TOF. Nonostante un attento processo di ottimizzazione della risoluzione delle sue componenti, persistono residui errori strumentali che limitano la qualità (già ottima) del segnale, tutt'oggi oggetto di studio. L'elaborato presentato in questa tesi è suddiviso in tre capitoli: nel primo ripercorriamo gli aspetti teorici del Modello Standard e del Quark Gluon Plasma. Nel secondo descriviamo la struttura di rivelazione di ALICE, analizzando il funzionamento delle singole componenti. Nel terzo, infine, verifichiamo le principali correzioni al TOF ad oggi note, confrontando i dati a nostra disposizione con delle simulazioni Monte Carlo: questo ci permette da un lato di approfondirne la conoscenza, dall'altro di cercarne di migliorare la descrizione del comportamento del rivelatore.

Comparison of monte carlo collimator transport methods for photon treatment planning in radiotherapy

The aim of this work was a Monte Carlo (MC) based investigation of the impact of different radiation transport methods in collimators of a linear accelerator on photon beam characteristics, dose distributions, and efficiency. Thereby it is investigated if it is possible to use different simplifications in the radiation transport for some clinical situations in order to save calculation time.

Monte Carlo implementation, validation, and characterization of a 120 leaf MLC

Recently, the new high definition multileaf collimator (HD120 MLC) was commercialized by Varian Medical Systems providing high resolution in the center section of the treatment field. The aim of this work is to investigate the characteristics of the HD120 MLC using Monte Carlo (MC) methods.

Validation of the Swiss Monte Carlo Plan for a static and dynamic 6 MV photon beam

Monte Carlo (MC) based dose calculations can compute dose distributions with an accuracy surpassing that of conventional algorithms used in radiotherapy, especially in regions of tissue inhomogeneities and surface discontinuities. The Swiss Monte Carlo Plan (SMCP) is a GUI-based framework for photon MC treatment planning (MCTP) interfaced to the Eclipse treatment planning system (TPS). As for any dose calculation algorithm, also the MCTP needs to be commissioned and validated before using the algorithm for clinical cases. Aim of this study is the investigation of a 6 MV beam for clinical situations within the framework of the SMCP. In this respect, all parts i.e. open fields and all the clinically available beam modifiers have to be configured so that the calculated dose distributions match the corresponding measurements. Dose distributions for the 6 MV beam were simulated in a water phantom using a phase space source above the beam modifiers. The VMC++ code was used for the radiation transport through the beam modifiers (jaws, wedges, block and multileaf collimator (MLC)) as well as for the calculation of the dose distributions within the phantom. The voxel size of the dose distributions was 2mm in all directions. The statistical uncertainty of the calculated dose distributions was below 0.4%. Simulated depth dose curves and dose profiles in terms of [Gy/MU] for static and dynamic fields were compared with the corresponding measurements using dose difference and γ analysis. For the dose difference criterion of ±1% of D(max) and the distance to agreement criterion of ±1 mm, the γ analysis showed an excellent agreement between measurements and simulations for all static open and MLC fields. The tuning of the density and the thickness for all hard wedges lead to an agreement with the corresponding measurements within 1% or 1mm. Similar results have been achieved for the block. For the validation of the tuned hard wedges, a very good agreement between calculated and measured dose distributions was achieved using a 1%/1mm criteria for the γ analysis. The calculated dose distributions of the enhanced dynamic wedges (10°, 15°, 20°, 25°, 30°, 45° and 60°) met the criteria of 1%/1mm when compared with the measurements for all situations considered. For the IMRT fields all compared measured dose values agreed with the calculated dose values within a 2% dose difference or within 1 mm distance. The SMCP has been successfully validated for a static and dynamic 6 MV photon beam, thus resulting in accurate dose calculations suitable for applications in clinical cases.

Checking Assumptions in Latent Class Regression Models via a Markov Chain Monte Carlo Estimation Approach: An Application to Depression and Socio-Economic Status

Latent class regression models are useful tools for assessing associations between covariates and latent variables. However, evaluation of key model assumptions cannot be performed using methods from standard regression models due to the unobserved nature of latent outcome variables. This paper presents graphical diagnostic tools to evaluate whether or not latent class regression models adhere to standard assumptions of the model: conditional independence and non-differential measurement. An integral part of these methods is the use of a Markov Chain Monte Carlo estimation procedure. Unlike standard maximum likelihood implementations for latent class regression model estimation, the MCMC approach allows us to calculate posterior distributions and point estimates of any functions of parameters. It is this convenience that allows us to provide the diagnostic methods that we introduce. As a motivating example we present an analysis focusing on the association between depression and socioeconomic status, using data from the Epidemiologic Catchment Area study. We consider a latent class regression analysis investigating the association between depression and socioeconomic status measures, where the latent variable depression is regressed on education and income indicators, in addition to age, gender, and marital status variables. While the fitted latent class regression model yields interesting results, the model parameters are found to be invalid due to the violation of model assumptions. The violation of these assumptions is clearly identified by the presented diagnostic plots. These methods can be applied to standard latent class and latent class regression models, and the general principle can be extended to evaluate model assumptions in other types of models.

An efficient framework for photon Monte Carlo treatment planning

Currently photon Monte Carlo treatment planning (MCTP) for a patient stored in the patient database of a treatment planning system (TPS) can usually only be performed using a cumbersome multi-step procedure where many user interactions are needed. This means automation is needed for usage in clinical routine. In addition, because of the long computing time in MCTP, optimization of the MC calculations is essential. For these purposes a new graphical user interface (GUI)-based photon MC environment has been developed resulting in a very flexible framework. By this means appropriate MC transport methods are assigned to different geometric regions by still benefiting from the features included in the TPS. In order to provide a flexible MC environment, the MC particle transport has been divided into different parts: the source, beam modifiers and the patient. The source part includes the phase-space source, source models and full MC transport through the treatment head. The beam modifier part consists of one module for each beam modifier. To simulate the radiation transport through each individual beam modifier, one out of three full MC transport codes can be selected independently. Additionally, for each beam modifier a simple or an exact geometry can be chosen. Thereby, different complexity levels of radiation transport are applied during the simulation. For the patient dose calculation, two different MC codes are available. A special plug-in in Eclipse providing all necessary information by means of Dicom streams was used to start the developed MC GUI. The implementation of this framework separates the MC transport from the geometry and the modules pass the particles in memory; hence, no files are used as the interface. The implementation is realized for 6 and 15 MV beams of a Varian Clinac 2300 C/D. Several applications demonstrate the usefulness of the framework. Apart from applications dealing with the beam modifiers, two patient cases are shown. Thereby, comparisons are performed between MC calculated dose distributions and those calculated by a pencil beam or the AAA algorithm. Interfacing this flexible and efficient MC environment with Eclipse allows a widespread use for all kinds of investigations from timing and benchmarking studies to clinical patient studies. Additionally, it is possible to add modules keeping the system highly flexible and efficient.

Collapsed cone convolution and analytical anisotropic algorithm dose calculations compared to VMC++ Monte Carlo simulations in clinical cases

The purpose of this work was to study and quantify the differences in dose distributions computed with some of the newest dose calculation algorithms available in commercial planning systems. The study was done for clinical cases originally calculated with pencil beam convolution (PBC) where large density inhomogeneities were present. Three other dose algorithms were used: a pencil beam like algorithm, the anisotropic analytic algorithm (AAA), a convolution superposition algorithm, collapsed cone convolution (CCC), and a Monte Carlo program, voxel Monte Carlo (VMC++). The dose calculation algorithms were compared under static field irradiations at 6 MV and 15 MV using multileaf collimators and hard wedges where necessary. Five clinical cases were studied: three lung and two breast cases. We found that, in terms of accuracy, the CCC algorithm performed better overall than AAA compared to VMC++, but AAA remains an attractive option for routine use in the clinic due to its short computation times. Dose differences between the different algorithms and VMC++ for the median value of the planning target volume (PTV) were typically 0.4% (range: 0.0 to 1.4%) in the lung and -1.3% (range: -2.1 to -0.6%) in the breast for the few cases we analysed. As expected, PTV coverage and dose homogeneity turned out to be more critical in the lung than in the breast cases with respect to the accuracy of the dose calculation. This was observed in the dose volume histograms obtained from the Monte Carlo simulations.

Conversion of CT numbers into tissue parameters for Monte Carlo dose calculations: a multi-centre study

The conversion of computed tomography (CT) numbers into material composition and mass density data influences the accuracy of patient dose calculations in Monte Carlo treatment planning (MCTP). The aim of our work was to develop a CT conversion scheme by performing a stoichiometric CT calibration. Fourteen dosimetrically equivalent tissue subsets (bins), of which ten bone bins, were created. After validating the proposed CT conversion scheme on phantoms, it was compared to a conventional five bin scheme with only one bone bin. This resulted in dose distributions D(14) and D(5) for nine clinical patient cases in a European multi-centre study. The observed local relative differences in dose to medium were mostly smaller than 5%. The dose-volume histograms of both targets and organs at risk were comparable, although within bony structures D(14) was found to be slightly but systematically higher than D(5). Converting dose to medium to dose to water (D(14) to D(14wat) and D(5) to D(5wat)) resulted in larger local differences as D(5wat) became up to 10% higher than D(14wat). In conclusion, multiple bone bins need to be introduced when Monte Carlo (MC) calculations of patient dose distributions are converted to dose to water.

Monte Carlo calculation of Varian 2300C/D Linac photon beam characteristics: a comparison between MCNP4C, GEANT3 and measurements

Different codes are used for Monte Carlo (MC) calculations in radiation therapy. In this research, MCNP4C and GEANT3 codes have been compared in calculations of dosimetric characteristics of Varian Clinac 2300C/D. The parameters of influence in the differences seen in dosimetric features were discussed. This study emphasizes that both MCNP4C and GEANT3 MC can be used in radiation therapy computations and their differences in photon spectra calculations have a negligible effect on percentage depth dose computations in radiation therapy.