Contexto competitivo, monitoramento ambiental e tomada de decisão estratégica: o caso dos micro e pequenos varejos da região do Barro Preto em Belo Horizonte

Este artigo apresenta os resultados de pesquisa exploratória realizada no primeiro semestre de 2008 com micro e pequenos empresários na região do Barro Preto em Belo Horizonte, importante pólo da moda mineira. Para a coleta de dados, optou-se pela utilização de um questionário estruturado, com perguntas fechadas, o qual foi aplicado a nove empresários da região, escolhidos a partir dos seguintes critérios: (a) acessibilidade dos pesquisadores às fontes de dados; (b) tempo disponível para a coleta de dados; (c) importância do empreendimento para a região. Por ser um tipo de pesquisa predominantemente quantitativa, técnicas estatísticas foram utilizadas nas análises dos dados coletados. Os resultados revelaram que, em contextos competitivos turbulentos, é aconselhável um processo de monitoramento contínuo dos movimentos dos concorrentes (diretos e indiretos) e das mudanças macroambientais, coletando informações úteis para uma tomada de decisão estratégica cada vez mais eficaz que favoreça a manutenção de vantagens competitivas significativas nos mercados em que os empreendimentos estão inseridos ao longo do tempo.

Organismos filantrópicos y no gubernamentales en el desarrollo de nuevas ciencias y tecnologías: el caso de las micro y nanotecnologías en México

RESUMEN: La emergencia de nuevas ciencias y tecnologías vienen acompañadas de nuevas dinámicas en la producción, el uso y la diseminación de nuevos conocimientos científicos y tecnológicos. Estas nuevas dinámicas se reflejan en la reorganización de las actividades científicas, en la creación o la reorientación de nuevas temáticas en la investigación, en la emergencia de nuevas preocupaciones y debates sobre los riesgos e implicaciones sociales, y en la participación de nuevos actores en el desarrollo de la ciencia y la tecnología, entre otros factores. En este artículo se presentan los resultados del estudio sobre las funciones de un organismo con orígenes filantrópicos y no gubernamental que ha sido central en el desarrollo de los sistemas microelectromecánicos (MEMS) en México. Las funciones que se analizan han sido y son desarrolladas en las diferentes etapas del desarrollo de esta tecnología emergente en este país. Además de mostrar las funciones desempeñadas por este tipo de organismo, este texto se cuestiona sobre la modelización de las relaciones entre las diferentes entidades presentes en el desarrollo e instalación de nuevas tecnologías. En las conclusiones intentamos avanzar algunos elementos para tomar en cuenta estos organismos y enriquecer los estudios sociales sobre las nuevas ciencias y tecnologías. ABSTRACT: The emergence of new sciences and technologies come with new dynamics in the production, use and dissemination of new scientific and technological knowledge. These new dynamics are reflected in the reorganization of scientific activities, in creating or redirecting new topics in research, in the emergence of new concerns and debates about the risks and social implications, and the participation of new actors in the development of science and technology, among other factors. This article presents the results of the study on the functions of an organism with philanthropic and non-governmental sources that has been central to the development of microelectromechanical systems (MEMS) in Mexico. The functions have been discussed and are developed at different stages of development of this emerging technology in this country. In addition to showing the functions of such a body, this text is questioned on modeling the relationships between the various entities in the development and deployment of new technologies. In the conclusions we try moving some elements to take into account these organisms and enrich social studies on the new sciences and technologies.

MMPBSA decomposition of the binding energy throughout a molecular dynamics simulation of Amyloid-Beta (Aß10-35) aggregation

Recent experiments with amyloid-beta (Aß) peptides indicate that the formation of toxic oligomers may be an important contribution to the onset of Alzheimer's disease. The toxicity of Aß oligomers depend on their structure, which is governed by assembly dynamics. However, a detailed knowledge of the structure of at the atomic level has not been achieved yet due to limitations of current experimental techniques. In this study, replica exchange molecular dynamics simulations are used to identify the expected diversity of dimer conformations of Aß10-35 monomers. The most representative dimer conformation has been used to track the dimer formation process between both monomers. The process has been characterized by means of the evolution of the decomposition of the binding free energy, which provides an energetic profile of the interaction. Dimers undergo a process of reorganization driven basically by inter-chain hydrophobic and hydrophilic interactions and also solvation/desolvation processes.

Dosage optimization of treatments using population pharmacokinetic modeling and simulation.

Pharmacokinetic variability in drug levels represent for some drugs a major determinant of treatment success, since sub-therapeutic concentrations might lead to toxic reactions, treatment discontinuation or inefficacy. This is true for most antiretroviral drugs, which exhibit high inter-patient variability in their pharmacokinetics that has been partially explained by some genetic and non-genetic factors. The population pharmacokinetic approach represents a very useful tool for the description of the dose-concentration relationship, the quantification of variability in the target population of patients and the identification of influencing factors. It can thus be used to make predictions and dosage adjustment optimization based on Bayesian therapeutic drug monitoring (TDM). This approach has been used to characterize the pharmacokinetics of nevirapine (NVP) in 137 HIV-positive patients followed within the frame of a TDM program. Among tested covariates, body weight, co-administration of a cytochrome (CYP) 3A4 inducer or boosted atazanavir as well as elevated aspartate transaminases showed an effect on NVP elimination. In addition, genetic polymorphism in the CYP2B6 was associated with reduced NVP clearance. Altogether, these factors could explain 26% in NVP variability. Model-based simulations were used to compare the adequacy of different dosage regimens in relation to the therapeutic target associated with treatment efficacy. In conclusion, the population approach is very useful to characterize the pharmacokinetic profile of drugs in a population of interest. The quantification and the identification of the sources of variability is a rational approach to making optimal dosage decision for certain drugs administered chronically.

Spatial behavior in groups: an agent-based approach

We present an agent-based model with the aim of studying how macro-level dynamics of spatial distances among interacting individuals in a closed space emerge from micro-level dyadic and local interactions. Our agents moved on a lattice (referred to as a room) using a model implemented in a computer program called P-Space in order to minimize their dissatisfaction, defined as a function of the discrepancy between the real distance and the ideal, or desired, distance between agents. Ideal distances evolved in accordance with the agent's personal and social space, which changed throughout the dynamics of the interactions among the agents. In the first set of simulations we studied the effects of the parameters of the function that generated ideal distances, and in a second set we explored how group macrolevel behavior depended on model parameters and other variables. We learned that certain parameter values yielded consistent patterns in the agents' personal and social spaces, which in turn led to avoidance and approaching behaviors in the agents. We also found that the spatial behavior of the group of agents as a whole was influenced by the values of the model parameters, as well as by other variables such as the number of agents. Our work demonstrates that the bottom-up approach is a useful way of explaining macro-level spatial behavior. The proposed model is also shown to be a powerful tool for simulating the spatial behavior of groups of interacting individuals.

Comparing simulation methods for modelling the errors of stand inventory data

Abstract

Micro-Computer Based Linear Scheduling Application for Highway Construction Project Control, HR-339A, 1995

This report describes a new approach to the problem of scheduling highway construction type projects. The technique can accurately model linear activities and identify the controlling activity path on a linear schedule. Current scheduling practices are unable to accomplish these two tasks with any accuracy for linear activities, leaving planners and manager suspicious of the information they provide. Basic linear scheduling is not a new technique, and many attempts have been made to apply it to various types of work in the past. However, the technique has never been widely used because of the lack of an analytical approach to activity relationships and development of an analytical approach to determining controlling activities. The Linear Scheduling Model (LSM) developed in this report, completes the linear scheduling technique by adding to linear scheduling all of the analytical capabilities, including computer applications, present in CPM scheduling today. The LSM has tremendous potential, and will likely have a significant impact on the way linear construction is scheduled in the future.

Simulation of spring wheat responses to elevated CO‚́‚ and temperature by using CERES-wheat crop model

Selostus: Kohotettujen CO‚́‚:n ja lämpötilan vaikutukset kevätvehnän fenologiseen kehitykseen ja sadontuottomahdollisuuksiin

Hygiène des mains et utilisation de protection respiratoire : attention aux risques de contamination microbiologique imprévue!

Une mauvaise hygiène des mains peut représenter une perte économique importante pour les industries alimentaires ou les industries pharmaceutiques et constitue un gros problème de santé publique dans les établissements de soins. En effet, le risque de transmission manuportée de pathogènes d'un patient à l'autre via le personnel soignant est un problème récurrent dans tous les hôpitaux. C'est pourquoi, une hygiène irréprochable des mains du personnel soignant est une composante fondamentale de lutte contre les infections nosocomiales. En comparaison avec les autres techniques de séchage des mains, l'utilisation d'une serviette en papier à usage unique semble être la méthode la plus efficace pour éliminer les bactéries. En effet, les autres méthodes de séchage, utilisant des appareils à air chaud ou froid, peuvent générer un air contaminé ou remettre en suspension les germes restés sur la peau, facilitant ainsi leur dispersion et leur inhalation. C'est pourquoi, l'OMS a émis des recommandations déconseillant les sèche-mains électriques en milieu hospitalier au profit des serviettes en papiers. Cependant, ces serviettes à usage unique ne sont pas stériles et peuvent elles-mêmes déposer des germes, généralement non pathogènes, sur les mains lors du séchage. Le but du premier article analysé est d'évaluer le niveau de contamination de ces serviettes, ainsi que la possibilité de dépôt de ces bactéries présentes sur les serviettes, sur les mains. À côté du risque de propagation de pathogènes par contact direct, la contamination microbiologique par voie aérienne via les aérosols existe aussi. Pour éviter d'être contaminé par des personnes excrétrices de micro-organismes transmissibles par aérosols (tuberculose, grippe, grippe aviaire SRAS...), il faut porter des protections respiratoires de type FFP2 (1) (norme européenne équivalente à la norme anglosaxonne N95). Ces protections respiratoires ou masques filtrants (en formes de bec de canard) peuvent être portées théoriquement pendant 4 heures. Le but de l'étude du second article est d'évaluer le risque de remise en suspension dans l'air de particules virales présentes sur la face extérieure d'un masque de protection respiratoire lors de simulation d'épisodes de toux provenant du porteur de cette protection.

A Feasibility Study on Embedded Micro-Electromechanical Sensors and Systems (MEMS) for Monitoring Highway Structures, TR-575, 2011

Micro-electromechanical systems (MEMS) provide vast improvements over existing sensing methods in the context of structural health monitoring (SHM) of highway infrastructure systems, including improved system reliability, improved longevity and enhanced system performance, improved safety against natural hazards and vibrations, and a reduction in life cycle cost in both operating and maintaining the infrastructure. Advancements in MEMS technology and wireless sensor networks provide opportunities for long-term continuous, real-time structural health monitoring of pavements and bridges at low cost within the context of sustainable infrastructure systems. The primary objective of this research was to investigate the use of MEMS in highway structures for health monitoring purposes. This study focused on investigating the use of MEMS and their potential applications in concrete through a comprehensive literature review, a vendor survey, and a laboratory study, as well as a small-scale field study. Based on the comprehensive literature review and vendor survey, the latest information available on off-the-shelf MEMS devices, as well as research prototypes, for bridge, pavement, and traffic applications were synthesized. A commercially-available wireless concrete monitoring system based on radio-frequency identification (RFID) technology and off-the-shelf temperature and humidity sensors were tested under controlled laboratory and field conditions. The test results validated the ability of the RFID wireless concrete monitoring system in accurately measuring the temperature both inside the laboratory and in the field under severe weather conditions. In consultation with the project technical advisory committee (TAC), the most relevant MEMS-based transportation infrastructure research applications to explore in the future were also highlighted and summarized.

Simulation of growth and development of irrigated cowpea in Piauí State by CROPGRO model

The objective of this work was to adapt the CROPGRO model, which is part of the DSSAT system, for simulating the cowpea (Vigna unguiculata) growth and development under soil and climate conditions of the Baixo Parnaíba region, Piauí State, Brazil. In the CROPGRO, only input parameters that define crop species, cultivars, and ecotype were changed in order to characterize the cowpea crop. Soil and climate files were created for the considered site. Field experiments without water deficit were used to calibrate the model. In these experiments, dry matter (DM), leaf area index (LAI), yield components and grain yield of cowpea (cv. BR 14 Mulato) were evaluated. The results showed good fit for DM and LAI estimates. The medium values of R² and medium absolute error (MAE) were, respectively, 0.95 and 264.9 kg ha-1 for DM, and 0.97 and 0.22 for LAI. The difference between observed and simulated values of plant phenology varied from 0 to 3 days. The model also presented good performance for yield components simulation, excluding 100-grain weight, for which the error ranged from 20.9% to 34.3%. Considering the medium values of crop yield in two years, the model presented an error from 5.6%.

On-line desorption of dried blood spot: A novel approach for the direct LC/MS analysis of micro-whole blood samples.

The aim of this work is to present a new concept, called on-line desorption of dried blood spots (on-line DBS), allowing the direct analysis of a dried blood spot coupled to liquid chromatography mass spectrometry device (LC/MS). The system is based on an inox cell which can receive a blood sample (10 microL) previously spotted on a filter paper. The cell is then integrated into LC/MS system where the analytes are desorbed out of the paper towards a column switching system ensuring the purification and separation of the compounds before their detection on a single quadrupole MS coupled to atmospheric pressure chemical ionisation (APCI) source. The described procedure implies that no pretreatment is necessary in spite the analysis is based on whole blood sample. To ensure the applicability of the concept, saquinavir, imipramine, and verapamil were chosen. Despite the use of a small sampling volume and a single quadrupole detector, on-line DBS allowed the analyses of these three compounds over their therapeutic concentrations from 50 to 500 ng/mL for imipramine and verapamil and from 100 to 1000 ng/mL for saquinavir. Moreover, the method showed good repeatability with relative standard deviation (RSD) lower than 15% based on two levels of concentration (low and high). Function responses were found to be linear over the therapeutic concentration for each compound and were used to determine the concentrations of real patient samples for saquinavir. Comparison of the founded values with those of a validated method used routinely in a reference laboratory showed a good correlation between the two methods. Moreover, good selectivity was observed ensuring that no endogenous or chemical components interfered with the quantitation of the analytes. This work demonstrates the feasibility and applicability of the on-line DBS procedure for bioanalysis.

A semi-grand canonical Monte Carlo simulation model for ion binding to ionizable surfaces: proton binding of carboxylated latex particles as a case study

In this paper, we present a computer simulation study of the ion binding process at an ionizable surface using a semi-grand canonical Monte Carlo method that models the surface as a discrete distribution of charged and neutral functional groups in equilibrium with explicit ions modelled in the context of the primitive model. The parameters of the simulation model were tuned and checked by comparison with experimental titrations of carboxylated latex particles in the presence of different ionic strengths of monovalent ions. The titration of these particles was analysed by calculating the degree of dissociation of the latex functional groups vs. pH curves at different background salt concentrations. As the charge of the titrated surface changes during the simulation, a procedure to keep the electroneutrality of the system is required. Here, two approaches are used with the choice depending on the ion selected to maintain electroneutrality: counterion or coion procedures. We compare and discuss the difference between the procedures. The simulations also provided a microscopic description of the electrostatic double layer (EDL) structure as a function of p H and ionic strength. The results allow us to quantify the effect of the size of the background salt ions and of the surface functional groups on the degree of dissociation. The non-homogeneous structure of the EDL was revealed by plotting the counterion density profiles around charged and neutral surface functional groups.

Effects of antiresorptive agents on bone micro-architecture assessed by Trabecular Bone Score in women age 50 and older. The Manitoba Prospective Study

Antiresorptive agents such as bisphosphonates induce a rapid increase of BMD during the 1st year of treatment and a partial maintenance of bone architecture. Trabecular Bone Score (TBS), a new grey-level texture measurement that can be extracted from the DXA image, correlates with 3D parameters of bone micro-architecture. Aim: To evaluate the longitudinal effect of antiresorptive agents on spine BMD and on site-matched spine microarchitecture as assessed by TBS. Methods: From the BMD database for Province of Manitoba, Canada, we selected women age >50 with paired baseline and follow up spine DXA examinations who had not received any prior HRT or other antiresorptive drug.Women were divided in two subgroups: (1) those not receiving any HRT or antiresorptive drug during follow up (=non-users) and (2) those receiving non-HRT antiresorptive drug during follow up (=users) with high adherence (medication possession ratio >75%) from a provincial pharmacy database system. Lumbar spine TBS was derived by the Bone Disease Unit, University of Lausanne, for each spine DXA examination using anonymized files (blinded from clinical parameters and outcomes). Effects of antiresorptive treatment for users and non-users on TBS and BMD at baseline and during mean 3.7 years follow-up were compared. Results were expressed % change per year. Results: 1150 non-users and 534 users met the inclusion criteria. At baseline, users and non-users had a mean age and BMI of [62.2±7.9 vs 66.1±8.0 years] and [26.3±4.7 vs 24.7±4.0 kg/m²] respectively. Antiresorptive drugs received by users were bisphosphonates (86%), raloxifene (10%) and calcitonin (4%). Significant differences in BMD change and TBS change were seen between users and nonusers during follow-up (p<0.0001). Significant decreases in mean BMD and TBS (−0.36± 0.05% per year; −0.31±0.06% per year) were seen for non-users compared with baseline (p<0.001). A significant increase in mean BMD was seen for users compared with baseline (+1.86±0.0% per year, p<0.0018). TBS of users also increased compared with baseline (+0.20±0.08% per year, p<0.001), but more slowly than BMD. Conclusion: We observed a significant increase in spine BMD and a positive maintenance of bone micro-architecture from TBS with antiresorptive treatment, whereas the treatment naïve group lost both density and micro-architecture. TBS seems to be responsive to treatment and could be suitable for monitoring micro-architecture. This article is part of a Special Issue entitled ECTS 2011. Disclosure of interest: M.-A. Krieg: None declared, A. Goertzen: None declared, W. Leslie: None declared, D. Hans Consulting fees from Medimaps.