Incomplete vertical root fracture associated with lateral compaction technique: a microscopic analysis

Objective: This study evaluated the effects of root canal obturation employing lateral compaction technique and spreader load of 1.5 kg on the incidence of complete (CVRF) or incomplete vertical root fractures (IVRF). Material and Methods: Twenty-seven distal roots of extracted human mandibular molars were used. All root canals were prepared by biomechanical step-back technique and obturated by lateral compaction technique. The prepared roots were distributed into two groups: G1- experimental (n = 17) and G2- control (n = 10). During obturation, load of 1.5 kg was applied to a size # 30 finger spreader. Pre- and post-obturation images of the coronal portion of the roots were captured by inverted digital microscopy and analyzed by one trained examiner. Data were evaluated by Fisher’s test (p < 0.05) using GrapH Pad Prism 5.0. Results: No roots exhibited CVRF. All fractures observed before and after obturation were IVRF or “other defects”. In G2 (control group), there was no increase of IVRF number. Interestingly, G1 presented an increase in the IVRF number to 70.59% in the 12 teeth out of 17 teeth studied. The statistical analysis showed that the mean of IVRF increased significantly in G1 when compared to G2 (p < 0.05). Conclusion: The application of a 1.5 kg spreader load during lateral compaction technique does not produce complete vertical root fractures, but may produce incomplete fractures or “other defects”.

Estimativa da altura por dimensões dentárias: uma revisão da literatura

The knowledge of Forensic Anthropology is very importance in cases of identification of human remains. One phase of this process is the study of human height, which can be accomplished with relative ease when intact corpses, complete skeletons or long bones are available. However, the experience of Forensic Dentistry is essential in situations in which there is only information of the skull or of the teeth. The objective of this study was to review in the literature and evaluate works concerning the estimate of the height calculated from dental dimensions. Carrea, in 1920, proposed the estimation of the probable height of an individual by developing formulas for maximum and minimum heights from measurements of the lower central and lateral incisors and canines. The method was used in the case "Josef Mengele", to complement estimates. Tested in the Brazilian population, 70% of match between the actual and the estimated stature were obtained. Using more precise instruments, in the modified method, 96% of correct matching were verified. Recently, a new formula was introduced to estimate height, from measurements of upper teeth, because the technique cannot be used when jaw is not available. The correlation between height and dental dimensions is demonstrated. However, there is still a lack in scientific literature in this field, and further studies are necessary. The estimate of height from dental dimensions can be very useful and important, especially in situations where the complete skeleton it not found, and long bones are not available.

Prevalência de alterações locais e sistêmicas em indivíduos com disfunção temporomandibular

Temporomandibular disorder describes a variety of conditions including joint and muscle in the stomatognathic system, characterized by pain, TMJ sounds, functions irregular jaw and represent the leading cause of nondental pain in the orofacial region. The objective of this research was to evaluate the prevalence of ophthalmological, otological and cognitive-behavioral changes, parafunctional habits in individuals with temporomandibular disorders (TMD). A total of 117 medical records of female and male individuals, aged 18 to 60 years, from the Occlusion, Temporomandibular Dysfunction and Orofacial Pain of the Ribeirão Preto School of Dentistry – USP, between 2010 and 2011. The anamnesis index proposed by Helkimo was used to classify the individuals according to TMD severity degree and to divide them into two groups: AiI (mild to moderate) with 69 individuals and AiII (severe) with 48 individuals. The groups were then subdivided with respect to gender (72.64% female and 27.36% male) and age. There was predominance in the 18-40 year age group (60.68%) when compared to the 41-60 year age group (39.32%). Data were collected through an interview with questions about the presence of parafunctional habits, otological, ophthalmological and behavioral changes. Data were subjected to the statistical analysis using the Kruskal-Wallis test. The prevalence of each change was also evaluated. The results showed statistically significant for all groups according to gender, age and degree of severity. Individuals with temporomandibular disorders exhibited high prevalence of systemic and local dysfunctions.

Influence of the addition of chlorhexidine diacetate on bond strength of a high-viscosity glass ionomer cement to sound and artificial caries-affected dentin

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação tomográfica no tratamento com Herbst em adulto jovem

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Correlation of Fractal Dimension with Histomorphometry in Maxillary SinuLifting Using Autogenous Bone Graft

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo mecânico comparativo da estabilização de fratura ilíaca com dois tipos de implantes (parafusos com placa de compressão dinâmica e parafusos associados ao polimetilmetacrilato) em hemipelves caninas sintéticas

Pós-graduação em Cirurgia Veterinária - FCAV

Comparação de diferentes técnicas cirúrgicas para osteossíntese de ílio em gatos: revisão sistemática

Aproximadamente 20 a 22 % das fraturas em felinos são pélvicas e quase metade destas são em ilío, que muitas vezes estão associadas a outras lesões pélvicas ósseas e a tecidos moles. A indicação cirúrgica para o tratamento destas lesões depende do grau de instabilidade, de perda da continuidade óssea, colapso do canal pélvico, fraturas acetabulares, envolvimento de estruturas do eixo de sustentação de peso do animal, lesão nervosa e dor intratável mesmo com uso de analgésicos. O objetivo desta revisão sistemática foi comparar o uso de quatro métodos diferentes para a osteossíntese de ílio em gatos, sendo estes: as placas laterais, placas dorsais, placas em T e, parafusos, fios de Kirschner, fios de aço e polimetilmetacrilato usados em conjunto, em relação às implicações e complicações do uso de cada uma das técnicas. Foram utilizados artigos científicos retrospectivos e prospectivos publicados nas bases de dados informatizados PUBMED, Scielo, Periódico Capes e Google Schoolar que abordassem diferentes técnicas para a osteossíntese de ílio em gatos e foi realizada a análise e comparação de seus dados. Quatro artigos foram selecionados por serem adequados para abordar o tema indicado, todos redigidos em língua inglesa, porém, um sendo de origem francesa e três de origem britânica, cada artigo relatando um tipo diferente de método utilizado. A discussão e a conclusão se deram com base nestes artigos. Nenhuma das técnicas pode ser considerada perfeitamente adequada para qualquer osteossíntese de ílio. Cada uma das quatro possui prós e contras e tem demonstrado melhor eficácia para um tipo específico de fratura ilíaca em gatos, cabendo ao cirurgião veterinário reconhecer e selecionar a melhor a ser utilizada em cada situação

Cuidadores informais de idosos em pós-operatório de cirurgia de fêmur proximal: prevenção de novas quedas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação tridimensional das alterações maxilomandibulares após expansão rápida de maxila assistida cirurgicamente

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da influência do plasma rico em plaquetas, da terapia com laser em baixa intensidade ou da associação de ambos na cicatrização de defeitos de fenestração periodontal em ratos: estudo histoquímico e imunoistoquímico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da lipocalina associada à gelatinase de neutrófilos (NGAL) em idosos após osteossíntese de fêmur

Pós-graduação em Anestesiologia - FMB

Plasma rico em plaquetas, medula óssea ou quitosana nas osteossínteses minimamente invasivas na tíbia de cães

Pós-graduação em Cirurgia Veterinária - FCAV

Pinos transcorticais e gesso associados à aplicação local de plasma rico em plaquetas no tratamento de fratura do III metatarsiano em potro

In horses less than one year of age fractures of the third metacarpal bone (McIII) or metatarsal bone III (MtIII) are mainly attributed to trauma. Open reduction and internal fixation are the most common treatment method. A Quarter Horse filly with three months of age, which weighed 150kg presented a diaphyseal multifragmentar wedge fracture of right MtIII which was treated with transcortical pins and cast, associated with intralesional application of platelet rich plasma (PRP). After two years of surgery, the animal initiated a training program for racing, and six months later, the patient ran its first official match. The choice of therapeutic methods for treating fractures in horses should be one that provides an earlier repair and minor possibility of complications. Thus, the therapy association which was adopted was considered favorable, since allowed full reestablishment of locomotion of the patient and made possible its return to race.

Computer graphics applied to anatomy: a study of two bio-cad modeling methods on finite element analysis of human edentulous hemi-mandible

Modeling is a step to perform a finite element analysis. Different methods of model construction are reported in literature, as the Bio-CAD modeling. The purpose of this study was to perform a model evaluation and application using two methods of Bio-CAD modeling from human edentulous hemi-mandible on the finite element analysis. From CT scans of dried human skull was reconstructed a stereolithographic model. Two methods of modeling were performed: STL conversion approach (Model 1) associated to STL simplification and reverse engineering approach (Model 2). For finite element analysis was used the action of lateral pterygoid muscle as loading condition to assess total displacement (D), equivalent von-Mises stress (VM) and maximum principal stress (MP). Two models presented differences on the geometry regarding surface number (1834 (model 1); 282 (model 2)). Were observed differences in finite element mesh regarding element number (30428 nodes/16683 elements (model 1); 15801 nodes/8410 elements (model 2). D, VM and MP stress areas presented similar distribution in two models. The values were different regarding maximum and minimum values of D (ranging 0-0.511 mm (model 1) and 0-0.544 mm (model 2), VM stress (6.36E-04-11.4 MPa (model 1) and 2.15E-04-14.7 MPa (model 2) and MP stress (-1.43-9.14 MPa (model 1) and -1.2-11.6 MPa (model 2). From two methods of Bio-CAD modeling, the reverse engineering presented better anatomical representation compared to the STL conversion approach. The models presented differences in the finite element mesh, total displacement and stress distribution.