1000 resultados para Máxima velocidade aeróbia
Resumo:
Pós-graduação em Engenharia Elétrica - FEIS
Resumo:
The knowledge of the mechanical properties of nickel-titanium (NiTi) termoactives of the more accessible of the domestic market is still limited. Given this, the objective of this study was to evaluate and compare through deflection tests in brackets NiTi wires 03 term rectangular gauge 0.014 '' enabled x 0.025 '' and 0.016 '' x 0.022 '' of different brands (MORELLI (R), ORMCO (R) ORTHOSOURCE (R), ORTHOMETRIC (R), EURODONTO (R) and ADITEK (R)). All tests were carried out on universal testing machine EMIC DL 2000 under identical conditions and controlled at a temperature of 36 degrees C +/- 0.5 degrees C. Five measurements (N= 5) were performed for each thickness/wire tag that was deflected up to a limit of 4.0mm at a speed of 1.0mm/min. Each 0.2mm (round trip) of corresponding strength measured deflection for the construction of the graph of force x deflection at Tesc program version 3.04. Each graphic was evaluated according to the following variables: beginning of the Martensitic transformation (cN and mm), maximum strength (cN), the beginning and end of the plateau of deactivation (cN and mm) and length (mm) plateau. The average and standard deviation were calculated for all variables and statistical analysis was made by ANOVA tests 2 criteria and Turkey or Kruskal-Wallis and Dunn, a 5% level of significance. The results showed that the tests of 0.014 '' x0.025 '' ORTHOMETRIC (R) brands and ORMCO (R) showed the best results, as well as the wires of the MORELLI (R) and ORTHOSOURCE (R) to wires 0.016 '' x0.022 ''. In General, the gauge wires 0.014 '' x0.025 '' showed strength levels on the plateau of deactivation to 6 x smaller than 0.016 '' x0.022 '' caliber.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Introduction: The use of stabilizer bracelet is a frequent treatment for movement disorders to strengthen muscles and adjust coordination. Still questions remain regarding the benefi t of using loads to decrease involuntary movements and the best load and placement. Objective: To measure the infl uence of the stabilizer bracelet on the kinematics and spatiotemporal parameters in planar movements performed by the upper limb. Method: One child, who has the spastic diplegy type of cerebral palsy with choreoathetoid component, and a control child without cerebral palsy, both female and 7 years old, were subjected to analysis of movements in relation to displacement, velocity, linear acceleration, and the calculation of mean square error (MSE) with and without use of stabilizer bracelet with loads of 25, 50, and 75% of the supported maximum load. Results: After comparing data between subjects, a difference was found between patient and control in all situations and variables. An inter-individual comparison using 25% of the maximum load showed the smallest difference with the NDE. Discussion and Conclusion: This therapeutic option is low cost, easy to apply, and does not signifi cantly interfere in the aesthetic of the individual. Therefore, physiotherapists may prescribe this for activities that require greater control of the upper limb because for the case studied the upper limb movement was more effi cient with the use of the stabilizer bracelet.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
In Brazil, the practice of Soccer is encouraged very early. It is common remark that parents enroll their sons into soccer schools, promoting the involvement of these children in formal practice. However, there are not many studies that assess the effects of this practice in the physical capacities of children. Thus, the question that guides this study is: children who practice soccer systematically present better development of physical, especially agility, coordination and speed? The objective of this study was to compare the performance in velocity tests, agility and coordination of boys of 10 and 11 years, category dentinho or Sub-11, practitioners of soccer in schools and non practicing. The study included male children, born in 1997 and 1998, formed two groups: group of practitioners of soccer and group of non practicing. To belong to the group of practitioners, the child was regularly engaged for at least 1 year, with 1 hour daily and 2 to 3 times per week. The participants of the group of non practicing were not involved in regular practice of soccer and were paired in weight and stature with participants of the group of practitioners of soccer. Each participant was individually assessed in neutral environment and without foreign interference. For the assessment of the agility, was utilized the (shuttle run) test. The race test 30 meters stopped was employed for the assessment of the speed. The test of fiddling between the cones was employed to measure the coordination. The time spent to perform 1 attempt to each test was used for the comparison between groups. These data were treated, initially, by descriptive statistics (mean and standard deviation) and, subsequently, were compared by means of Anova, for independent samples. The significance level was maintained at 5%. Through analysis of the results the conclusion is that the regular practice ...(Complete abstract click electronic access below)
Resumo:
A silimarina é um flavonóide polifenólico extraído de frutos e sementes de Silybum marianum, que possui efeitos antiinflamatórios, citoprotetores e anticarcinogênicos. O objetivo deste trabalho foi avaliar o efeito antiinflamatório desse flavonóide sobre linhagens geneticamente selecionadas para máxima e mínima resposta inflamatória aguda, a intensidade dessa resposta foi avaliada através dos seguintes parâmetros: contagem total e diferencial de células, concentração protéica do exsudato infamatório e dosagem de H2O2 através de cultura de células do infiltrado. Para a avaliação do efeito da silimarina, as linhagens foram divididas em dois grupos, grupo AIRmax e grupo AIRmin, e cada um desses grupos foi subdividido em outros três grupos, de acordo com a forma de tratamento determinada (grupo controle, grupo tratado com silimarina 200mg/kg e grupo tratado com silimarina 100mg/kg). Os animais foram tratados durante seis dias consecutivos, recebendo um total de seis doses; ao final do tratamento os animais foram submetidos à indução flogógena pelo composto BIOGEL-P100 por via subcutânea, ao final de 24 horas o exsudato inflamatório foi retirado do dorso dos animais e preparados para análise. Os resultados demonstraram que a silimarina afetou significativamente alguns dos parâmetros avaliados. A contagem total de células mostrou redução significativa no número de células presentes no infiltrado do grupo AIRmax tratado com silimarina 100mg/kg em relação ao seu grupo controle; na contagem diferencial de células houve redução significativa no número de neutrófilos encontrados em amostras do exsudato dos animais AIRmax tratados com silimarina 100mg/kg, assumindo um padrão de resposta semelhante ao da contagem total; a concentração protéica mostrou redução significativa nos grupos AIRmax tratados com 100 e 200mg/kg em relação ao seu controle, indicando um possível efeito modulador da silimarina
Resumo:
This work is initially based in give a solution to a problem consisting of lifting a load in a warehouse focusing specifically on the solution´s project and comparison of the results obtained following the sequence of the book and comparing these results with the finite elements simulation based on the 3D components modeling. Starting from that was realized the project of the worm gear reducer to solve the problem and makes the work easier. The project consisted basically of the study, project itself and simulation by software of a worm gear reducer and projects steps, starting with the initial problem conditions (to lifting a load up to an specific height at a given time) following all the reducer project sequence, starting by the preliminary draft and electric motor selection using iterative process, material selection, worm gear dimensioning, axles, keyways, bearings and coupling. After that was performed the three dimensional modeling of the components using SolidWorks software and simulating these components using Ansys software. The results show the importance of the CAD in terms of improving project development speed and reducing costs with prototypes
Resumo:
This work aims to make the closed loop control of a three phase induction motor, through the integration of the following equipment: a frequency inverter, the actuator system; a programmable logic controller (PLC), the controller; an encoder, the velocity sensor, used as a feedback monitoring the control variable and the three-phase induction motor, the plant to be controlled. The control is performed using a Proportional - Integrative - Derivative (PID) approach. The PLC has a help instruction, which performs the auto adjustment of the controller, that instruction is used and confronted with other adjustment methods. There are several types of methods adjustments to the PID controllers, where the empirical methods are addressed in this work. The system is deployed at the Interface and Electro Electronic Control laboratory in the Universidade Estadual Paulista Júlio Mesquita Filho, Guaratinguetá, São Paulo, then, in the future, this work becomes an experiment to be conducted in the classroom, allowing undergraduate students to develop a greater affinity to the programs used by the PLC as well as studies of undergraduate and graduate works with the help of assembly made
Resumo:
The prescription of strength training intensity (ST) by maximum repetition (RM) is characterized by a decrease in the number of repetitions in multiple series. Some studies have shown that reductions in the intensity of exercise can optimize the volume of training with similar acute neuromuscular behaviors. The objective of the study was to investigate the acute effect of two different ST intensities on the training volume, maximum voluntary contraction (MVC) and rate of force development (RFD) in elderly women. The study included eight trained women (66.7 ± 6.7 years; 7.6 ± 17.8 kg; 159 cm; 29.33 ± 5.80 kg/m²). They underwent to three experimental conditions: two different intensities of ST (100% and 80% of 15-RM) on a chair for Leg Extension and a control condition. In the condition to 100% of 15 RM, all participants performed three sets to the concentric muscle fatigue, whereas in the condition to 80% involved the use of two sets of 15 repetitions and only the third to the concentric muscle fatigue. The order of experimental conditions was randomized. The MVC and RFD were determined on the basis of the isometric forcetime curve analysis which was obtained by a force transducer fixed on the unit Bonnet Chair, in the pre and after four and ten minutes for each experimental conditions. The total volume was calculated by multiplying the number of repetitions in three sets by the load in kg. Descriptive statistical analysis procedures were employed (mean ± standard deviation) in addition to two-way ANOVA. The level of significance was set at p <0.05. It was neither main effect of moment or condition, nor condition x moment interaction for MVC and RFD. For the total volume, no significant difference was noted between the conditions (100 and 80% of 15-RM). For sustainability of ...(Complete abstract click electronic access below)
Resumo:
Existente desde os Jogos Olímpicos da Grécia Antiga, as corridas de velocidade ocupam espaço de destaque dentre as provas do atletismo. Em particular, os 100 metros rasos masculino é a prova cujas particularidades merecem ser investigadas, sobretudo em função das inúmeras alterações ocorridas ao longo dos anos. Por exemplo, a princípio, a corrida de velocidade era disputada nos Jogos Olímpicos da Grécia Antiga, com o nome de stádion ou dromo e com um percurso de 192,27 metros. Com a decadência e a extinção dos Jogos Olímpicos, a corrida de velocidade deixou de ser disputada, retornando em 1896, com o renascimento dos Jogos Olímpicos da Era Moderna. Entretanto, dentre as modificações nas provas do atletismo, as corridas de velocidade passaram a ser de 100 e 400 metros rasos, o bloco de partida passou a ser obrigatório etc. O objetivo desta pesquisa consiste em averiguar as principais modificações ocorridas na prova dos 100 metros rasos masculino, desde a sua origem até os dias atuais. Esta pesquisa, de caráter histórico-bibliográfico, tem a finalidade de resgatar a história da prova dos 100 metros rasos com base na história dos Jogos Olímpicos, verificando as alterações em suas regras básicas, em sua composição e técnicas específicas, a fim de reunir subsídios para o seu ensino em aulas de Educação Física. Com esta pesquisa, esperamos contribuir não apenas com o resgate da história desta ocorridas na prova dos 100 metros rasos masculino, desde a sua origem até os dias atuais. Esta pesquisa, de caráter histórico-bibliográfico, tem a finalidade de resgatar a história da prova dos 100 metros rasos com base na história dos Jogos Olímpicos, verificando as alterações em suas regras básicas, em sua composição e técnicas específicas, a fim de reunir subsídios para o seu ensino em aulas de Educação Física. Com esta pesquisa, esperamos... (Resumo completo, clicar acesso eletrônico abaixo)
Resumo:
Several studies have shown that different stretching routines can lead to decreases on acute neuromuscular system performance. Although the deficit in muscle strength mediated by different methods of stretching has been systematically observed, few studies have investigated the possible existence of a dose-response relationship between the amount of stretching and muscle strength deficit in older adults. In this context, the objective of this study was to investigate the acute effect of two different stretching volumes on isometric force-time curve (Cf-t) in elderly women. The study included 13 older women (64.08 ± 4.27 years, 69.98 ± 10.56 kg, 157.90 ± 8.66 cm, 28.25 ± 4.22 kg/m²). The participants visited the laboratory for five consecutive days, among which the first two were used for familiarization. During the other three days the participants underwent experimental conditions: control (C) stretch 30 seconds (AE30) and stretch 60 seconds (AE60). For the AE30 and AE60 conditions, three series of passive static stretching were performed, with duration of 30 and 60 seconds, respectively. The experimental conditions were performed with an interval of at least 24 hours between them and the order of execution was randomized. The recording of isometric Cf-t of the knee extensor muscles was performed in extensor chair connected to a force transducer. Measurements were recorded immediately after each experimental condition, for five seconds. For statistical analysis, descriptive procedures were used and ANOVA one way to check possible changes on the Maximal Voluntary Contraction (CVM) and Peak Rate of Force Development (TDFP) among the three conditions (p <0.05). The ANOVA showed no statistically significant difference for CVM and TDFP, between the three conditions. It can be concluded that different volumes of static stretching, three sets ...(Complete abstract click electronic access below)
Resumo:
This work aims to kinematic and dynamic analysis of a VW Saveiro in order to estimate the power requested to the engine with the imposed movement conditions. Thus, the study will be the basis to the specification of the electric engine, on the conversion of the internal combustion vehicle into electric one. First of all, a literature review was done in order to understand the state of the art for this issue and come up with the technical features of the vehicle in question. The next step is the identification and calculation of all forces acting on the prototype in motion, from 0 to 120 km/h, in intervals of 10 km/h, under the defined conditions of path and time. Then, were determined the values of the torque and rotation of the components from the transmission system, as well as the engine power, for each speed range. The results show the most influential forces on the resistence of the movement in each speed range, and the behavior of the torque curve is verified. Finally, it was also analyzed the implementation of pinwheels on the frontal area of the vehicle, in order to convert wind energy into electrical energy to supply the lighting subsystem of the vehicle and the proposal was validated. Limiting the maximum speed of the vehicle to 90 km/h, it was finally concluded that the power of the electric engine should be 40 HP