Probing the interactions between ionic liquids and water: experimental and quantum chemical approach

For an adequate choice or design of ionic liquids, the knowledge of their interaction with other solutes and solvents is an essential feature for predicting the reactivity and selectivity of systems involving these compounds. In this work, the activity coefficient of water in several imidazolium-based ionic liquids with the common cation 1-butyl-3-methylimidazolium was measured at 298.2 K. To contribute to a deeper insight into the interaction between ionic liquids and water, COSMO-RS was used to predict the activity coefficient of water in the studied ionic liquids along with the excess enthalpies. The results showed good agreement between experimental and predicted activity coefficient of water in ionic liquids and that the interaction of water and ionic liquids was strongly influenced by the hydrogen bonding of the anion with water. Accordingly, the intensity of interaction of the anions with water can be ranked as the following: [CF3SO3](-) < [SCN](-) < [TFA](-) < Br(-) < [TOS](-) < Cl(-) < [CH3SO3](-) [DMP](-) < [Ac](-). In addition, fluorination and aromatization of anions are shown to reduce their interaction with water. The effect of temperature on the activity coefficient of water at infinite dilution was measured by inverse gas chromatography and predicted by COSMO-RS. Further analysis based on COSMO-RS provided information on the nature of hydrogen bonding between water and anion as well as the possibility of anion-water complex formation.

Evaluation of the conductor-like screening model for real solvents for the prediction of the water activity coefficient at infinite dilution in ionic liquids

Ionic liquids (ILs) have attracted great attention, from both industry and academia, as alternative fluids for very different types of applications. The large number of cations and anions allow a wide range of physical and chemical characteristics to be designed. However, the exhaustive measurement of all these systems is impractical, thus requiring the use of a predictive model for their study. In this work, the predictive capability of the conductor-like screening model for real solvents (COSMO-RS), a model based on unimolecular quantum chemistry calculations, was evaluated for the prediction water activity coefficient at infinite dilution, gamma(infinity)(w), in several classes of ILs. A critical evaluation of the experimental and predicted data using COSMO-RS was carried out. The global average relative deviation was found to be 27.2%, indicating that the model presents a satisfactory prediction ability to estimate gamma(infinity)(w) in a broad range of ILs. The results also showed that the basicity of the ILs anions plays an important role in their interaction with water, and it considerably determines the enthalpic behavior of the binary mixtures composed by Its and water. Concerning the cation effect, it is possible to state that generally gamma(infinity)(w) increases with the cation size, but it is shown that the cation-anion interaction strength is also important and is strongly correlated to the anion ability to interact with water. The results here reported are relevant in the understanding of ILs-water interactions and the impact of the various structural features of its on the gamma(infinity)(w) as these allow the development of guidelines for the choice of the most suitable lLs with enhanced interaction with water.

Computational and experimental study of the behavior of cyano-based ionic liquids in aqueous solution

The solvation of cyano- (CN-) based ionic liquids (ILs) and their capacity to establish hydrogen bonds (H-bonds) with water was studied by means of experimental and computational approaches. Experimentally, water activity data were measured for aqueous solutions of ILs based on 1-butyl-3-methylimidazolium ([BMIM](+)) cation combined with one of the following anions: thiocyanate ([SCN](-)), dicyanamide ([DCA](-)), or tricyanomethanide ([TCM](-)), and of 1-ethyl-3-methylimidazolium tetracyanoborate ([EMIM][TCB]). From the latter data, water activity coefficients were estimated showing that [BMIM][SCN] and [BMIM][DCA], unlike [BMIM][TCM] and [EMIM][TCB], are able to establish favorable interactions with water. Computationally, the conductor like screening model for real solvents (COSMO-RS) was used to estimate the water activity coefficients which compare well with the experimental ones. From the COSMO-RS results, it is suggested that the polarity of each ion composing the ILs has a strong effect on the solvation phenomena. Furthermore, classical molecular dynamics (MD) simulations were performed for obtaining an atomic level picture of the local molecular neighborhood of the different species. From the experimental and computational data it is showed that increasing the number of CN groups in the ILs' anions does not enhance their ability to establish H-bonds with water but decreases their polarities, being [BMIM][DCA] and [BMIM][SCN] the ones presenting higher propensity to interact.

Measurements of activity coefficients at infinite dilution of organic solutes and water on polar imidazolium-based ionic liquids

The activity coefficients at infinite dilution, gamma(infinity)(13), of 55 organic solutes and water in three ionic liquids with the common cation 1-butyl-3-methylimidazolium and the polar anions Cl--,Cl- [CH3SO3](-) and [(CH3)(2)PO4](-), were determined by (gas + liquid) chromatography at four temperatures in the range (358.15 to 388.15) K for alcohols and water, and T = (398.15 to 428.15) K for the other organic solutes including alkanes, cycloalkanes, alkenes, cycloalkenes, alkynes, ketones, ethers, cyclic ethers, aromatic hydrocarbons, esters, butyraldehyde, acetonitrile, pyridine, 1-nitropropane and thiophene. From the experimental gamma(infinity)(13) values, the partial molar excess Gibbs free energy, (G) over bar (E infinity)(m), enthalpy (H) over bar (E infinity)(m), and entropy (S) over bar (E infinity)(m), at infinite dilution, were estimated in order to provide more information about the interactions between the solutes and the ILs. Moreover, densities were measured and (gas + liquid) partition coefficients (KL) calculated. Selectivities at infinite dilution for some separation problems such as octane/benzene, cyclohexane/benzene and cyclohexane/thiophene were calculated using the measured gamma(infinity)(13), and compared with literature values for N-methyl-2-pyrrolidinone (NMP), sulfolane, and other ionic liquids with a common cation or anion of the ILs here studied. From the obtained infinite dilution selectivities and capacities, it can be concluded that the ILs studied may replace conventional entrainers applied for the separation processes of aliphatic/aromatic hydrocarbons.

Selection of ionic liquids to be used as separation agents for terpenes and terpenoids

In this work, ionic liquids are evaluated for the first time as solvents for extraction and entrainers in separation processes involving terpenes and terpenoids. For that purpose, activity coefficients at infinite dilution, γ13 ∞, of terpenes and terpenoids, in the ionic liquids [C4mim]Cl, [C4mim][CH3SO3], [C4mim][(CH3)2PO4] and [C4mim][CF3SO3] were determined by gas−liquid chromatography at six temperatures in the range 398.15 to 448.15 K. On the basis of the experimental values, a correlation of γ13 ∞ with an increase of the solubility parameters is proposed. The infinite dilution thermodynamic functions were calculated showing the entropic effect is dominant over the enthalpic. Gas−liquid partition coefficients give indications about the recovery and purification of terpenes and terpenoids from ionic liquid solutions. Presenting a strong innovative character, COSMO-RS was evaluated for the description of the selectivities and capacities, showing to be a useful tool for the screening of ionic liquids in order to find suitable candidates for terpenes and terpenoids extraction, and separation. COSMO-RS predictions show that in order to achieve the maximum separation efficiency, polar anions should be used such as bis(2,4,4-trimethylpentyl)phosphinate or acetate, whereas high capacities require nonpolar cations such as phosphonium.

Why are some cyano-based ionic liquids better glucose solvents than water?

Among different classes of ionic liquids (ILs), those with cyano-based anions have been of special interest due to their low viscosity and enhanced solvation ability for a large variety of compounds. Experimental results from this work reveal that the solubility of glucose in some of these ionic liquids may be higher than in water – a well-known solvent with enhanced capacity to dissolve mono- and disaccharides. This raises questions on the ability of cyano groups to establish strong hydrogen bonds with carbohydrates and on the optimal number of cyano groups at the IL anion that maximizes the solubility of glucose. In addition to experimental solubility data, these questions are addressed in this study using a combination of density functional theory (DFT) and molecular dynamics (MD) simulations. Through the calculation of the number of hydrogen bonds, coordination numbers, energies of interaction and radial and spatial distribution functions, it was possible to explain the experimental results and to show that the ability to favorably interact with glucose is driven by the polarity of each IL anion, with the optimal anion being dicyanamide.

Solubility and solvation of monosaccharides in ionic liquids

Herein, solubility experimental data for six monosaccharides, viz. D-(+)-glucose, D-(+)-mannose, D-(-)-fructose, D-(+)-galactose, D-(+)-xylose and L-(+)-arabinose, in four ionic liquids (ILs), at temperatures ranging from 288.2 to 348.2 K, were obtained aimed at gathering a better understanding of their solvation ability and molecular-level mechanisms which rule the dissolution process. To ascertain the chemical features that enhance the solubility of monosaccharides, ILs composed of dialkylimidazolium or tetra-alkylphosphonium cations combined with the dicyanamide, dimethylphosphate or chloride anions were investigated. It was found that the ranking of the solubility of monosaccharides depends on the IL; yet, D-(+)-xylose is always the most soluble while D-(-)-fructose is the least soluble monosaccharide. The results obtained show that both the IL cation and the anion play a major role in the solubility of monosaccharides. Finally, from the determination of the respective thermodynamic properties of solution, it was found that enthalpic contributions are dominant in the solubilization process. However, the observed differences in the solubilities of monosaccharides in 1-butyl-3-methylimidazolium dicyanamide are ruled by a change in the entropy of solution.

Síntese de zeólitas e argilas ácidas pilarizadas a partir de matérias primas naturais

Structural changes in waste for zeolites synthesis are subject of many studies carried out in the synthesis of molecular sieves. These materials are named molecular sieves because they have well defined pore sizes and they have the capacity of select molecules by its size. In this work, it was studied the synthesis processes of two types of molecular sieves: pillared acid clays using as starting material one natural montmorillonite clay and the synthesis of zeolites from a silico-aluminous residue. This residue is a byproduct of the extraction of lithium -spodumene. The preparation of pillared acid clays was performed in two steps: 1° acid treatment of clay samples (time and temperature studies) and 2°pilarization of them with Al13 (Keggin ion). The temperature and acid concentration affect the removal of cations in the structure and porosity of the material obtained. The analysis of X-ray diffraction (XRD) and infrared spectroscopy (IR), showed that increasing the severity of the acid treatment compromises the structural material. Also the pore size distribution is approximately uniform. Despite presenting a structural disorganization, the samples were pillared. As evidenced by XRD increasing the basal spacing, specific area and uniform porosity by adsorption of N2. Regarding the microporous molecular sieves were synthesized zeolites A and NaP1 from a silico-aluminous residue, a byproduct of extracting lithium. The temperature and time of agitation during the synthesis were the most important factors for obtaining zeolite A. The aging of the gel and the highest crystallization time promoted the formation of zeolite NaP1 using a Si / Al ratio = 3.2

Preparação, caracterização e aplicação de derivados do ácido 12- tungstofosfórico suportado em SBA-15

Dissertação (mestrado)—Universidade de Brasília, Instituto de Química, Programa de Pós-Graduação em Química, 2016.

Synthesis of innovative polyelectrolytes using monomers coming from renewable sources

240 p.

Estudos hidroquímicos da água produzida de um determinado campo de petróleo da bacia potiguar

Waste generated during the exploration and production of oil, water stands out due to various factors including the volume generated, the salt content, the presence of oil and chemicals and the water associated with oil is called produced water. The chemical composition of water is complex and depends strongly on the field generator, because it was in contact with the geological formation for thousands of years. This work aims to characterize the hydrochemical water produced in different areas of a field located in the Potiguar Basin. We collected 27 samples from 06 zones (400, 600, 400/600, 400/450/500, 350/400, A) the producing field called S and measured 50 required parameter divided between physical and chemical parameters, cations and anions. In hydrochemical characterization was used as tools of reasons ionic calculations, diagrams and they hydrochemical classification diagram Piper and Stiff diagram and also the statistic that helped in the identification of signature patterns for each production area including the area that supplies water injected this field for secondary oil recovery. The ionic balance error was calculated to assess the quality of the results of the analysis that was considered good, because 89% of the samples were below 5% error. Hydrochemical diagrams classified the waters as sodium chloride, with the exception of samples from Area A, from the injection well, which were classified as sodium bicarbonate. Through descriptive analysis and discriminant analysis was possible to obtain a function that differs chemically production areas, this function had a good hit rate of classification was 85%

Desvendando a resposta dos eosinófilos, dos neutrófilos e dos monócitos nas parasitoses intestinais, na asma e na associação de ambas em crianças

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Medicina, Pós-graduação em Medicina Tropical, 2015.

Étude de propriétés physico-chimiques des membranes lipidiques chargées d’acide palmitique/stérol et de stéarylamine/cholestérol

Les stérosomes, des vésicules artificielles composées d’amphiphiles monoalkylés et d’un grand pourcentage de stérols, sont prometteurs dans plusieurs domaines comme les industries pharmaceutiques et alimentaires. Il existe des stérosomes chargés négativement, positivement et neutres. Dans ce mémoire, nous avons approfondi nos connaissances sur les propriétés physico-chimiques des stérosomes chargés : acide palmitique (PA)/stérol et stéarylamine (SA)/cholestérol (Chol). Premièrement, afin de mesurer la diffusion latérale de PA dans les membranes PA/stérol (30/70 mol/mol) par RMN à gradients pulsés, nous avons tenté de former des bicouches liquide-ordonnées (lo) orientées magnétiquement avec ce mélange. En s'inspirant de l’idée que l’ajout de 1,2-dihexanoyl-sn-glycéro-3-phosphocholine (DHPC), un lipide à courtes chaînes, dans le système 1,2-dimyristoyl-sn-glycéro-3-phosphocholine (DMPC) mène à la formation de bicouches orientées, nous avons étudié la formulation PA perdeutéré/acide hexanoïque (HA)/Chol avec une proportion molaire de 25/18/57 à plusieurs températures; aucune formation de bicouches orientées n’a été observée. Ce résultat pourrait être expliqué par la solubilisation partielle de HA en milieu aqueux. Alors, une quantité insuffisante serait insérée dans la bicouche pour induire son orientation. La formulation PA perdeutéré/DHPC/Chol n’a pas conduit, elle non plus, à des bicouches orientées magnétiquement à des températures et concentrations lipidiques variées. En étudiant le mélange DMPC/DHPC/Chol (67/17/14), nous avons remarqué que la présence de Chol inhibait l'orientation magnétique des bicouches. Tandis que le mélange DMPC/DHPC/stigmastérol (SS) avec les proportions molaires 67/19/14 et 72/21/7 conduisait à des bicouches orientées avec leur normale (n) perpendiculaire au champ magnétique à 40 °C et 50 °C. Ces résultats suggèrent que le mélange PA/SS avec une proportion de lipide à courtes chaînes, HA et DHPC, pourrait mener à des bicouches orientées magnétiquement. Le mélange PA/Chol avec un lipide à courtes chaînes pourrait aussi être étudié en présence des lanthanides. Deuxièmement, nous avons examiné la possibilité de moduler la libération de matériel encapsulé dans des liposomes essentiellement composés de PA et d’un stérol. Il est connu que le mélange PA/Chol (30/70) à pH ≥ 7,5 forme des liposomes très peu perméables. Il est avantageux de pouvoir moduler la perméabilité pour avoir un contrôle sur le temps de libération de leur contenu, qui est un paramètre de grande importance pour les formulations liposomales de médicaments. D’abord, il a été montré que l’acide oléique (OA)/Chol (30/70) est capable de former des vésicules, ce qui n’avait jamais été prouvé auparavant. Par contre, les bicouches OA/Chol (30/70) ne sont pas plus perméables que les bicouches PA/Chol (30/70). L’ajout de 1-palmitoyl-2-oléoyl-sn-glycéro-3-phosphatidylcholine (POPC) dans le mélange PA/Chol n’augmente pas plus la perméabilité. En effet, les cinétiques de relargage de calcéine des vésicules PA/POPC/Chol (15/27.5/57.5), POPC/Chol (40/60) et POPC étaient très semblables à celle de PA/Chol (30/70). Il a été remarqué que les études littéraires se contredisent à propos de la perméabilité à la calcéine des bicouches de phosphatidylcholine (PC). L’explication de ces divergences est inconnue pour le moment. En remplaçant la moitié de la proportion molaire de Chol par le cholate de sodium (SC) dans le mélange PA/Chol (30/70), la membrane n’était pas plus apte à libérer son contenu. Il se pourrait que le SC se retrouvant dans la bicouche n’induit pas une diminution d’empilement. Il est aussi possible que le SC ne s'insère pas dans la membrane à cause de son hydrophilie considérable et il pourrait alors former seul des micelles. En remplaçant complètement le Chol par le sulfate de cholestérol (SChol), un stérol chargé négativement, et en préparant les vésicules à un bas pH, la formulation PA/SChol (30/70) mène à une très grande perméabilité à pH 7.5; le relargage est provoqué par un saut de pH. Nos travaux suggèrent qu'il serait possible de moduler la perméabilité des liposomes en les préparant avec le mélange PA/SChol/Chol en variant les proportions entre 30/63/7 à 30/70/0. Le diagramme pH-composition du mélange PA/SChol/Chol indique que ces proportions conduisent, à pH 7.4, à la coexistence de phases solide et lo en différentes proportions, ce qui pourrait moduler la perméabilité membranaire. Troisièmement, les résultats de perméabilité obtenus avec la calcéine et les difficultés survenues lors de l’extrusion des vésicules encapsulant cette sonde nous ont amené à nous demander si la calcéine interagit avec les bicouches chargées. L’impact de certains anions, dont la calcéine, a été examiné sur les bicouches chargées positivement SA/Chol (50/50). La calorimétrie différentielle à balayage (DSC, de l’anglais differential scanning calorimetry), indique qu’il n’y a aucune transition entre 25 et 90 °C pour les liposomes SA/Chol (50/50) à pH = 7.4. L’ajout de chlorure de sodim (375 mM) n’a pas mené à la formation d’agrégats et aucune transition n’a été observée sur le thermogramme. La formation d’agrégats macroscopiques instantanément après l’ajout d’hydrogénophosphate de sodium (125 mM), de sulfate de sodium (125 mM) et de calcéine (3 mM) a été observée. Une transition a été observée sur les thermogrammes en présence de ces sels. Les agrégats observés pourraient être associés à la transition de phase. L’effet des anions sur la température et l’enthalpie de transition suivent le même ordre que la série d’Hofmeister : sulfate > hydrogénophosphate > chlorure (pas de pic). La calcéine avait l’impact le plus prononcé sur l’agrégation; ceci illustre que la calcéine n’est pas une sonde fluorescente inerte avec le mélange SA/Chol. Elle pourrait être un chaotrope volumineux. De plus, les interactions SA-calcéine plus fortes, menant à l’agrégation des vésicules, que les interactions PC-calcéine pourraient s’expliquer par le fait que la SA est chargée positivement.

Geochemical Assessment and Separation of Source Waters in the Upper Boulder River Watershed Near Boulder, MT

Environmental samples were collected at three surface water sites between 5/21/2011 and 11/21/2014 along the Upper Boulder River near Boulder Montana. The sites were located at Bernice (within the mountain block), near the High Ore drainage (near the mountain block/basin transition), and at the USGS Gauging Station near Boulder, Montana (within the basin). The parameters measured in the field were SC, temperature, and alkalinity with occasional pH measurements. We collected samples for anions, cations, and stable isotopes in the catchment. We identified endmembers by sampling snow and groundwater and determined from available data an approximate endmember for rain, snow, and groundwater. We used temporal and spatial variations of water chemistry and isotopes to generate an endmember mixing model. Groundwater was found to always be an important contributor to river flow and could increase by nearly an order of magnitude during large snowmelt events. This resulted in groundwater comprising ~20% of total river flow during snowmelt at all sites. At peak snowmelt we observed that near surface water contributions to the river were from a mixture of rain and snow. Soil water, though not sampled, was hypothesized to be an important part of the hydrologic story. If so, the endmember contributions determined in this study may be different. Groundwater may have the highest variation depending on water chemistry of shallow soil water.

DESIGN, SYNTHESIS AND APPLICATIONS OF FLUORESCENT AND ELECTROCHEMICAL PROBES

“Seeing is believing” the proverb well suits for fluorescent imaging probes. Since we can selectively and sensitively visualize small biomolecules, organelles such as lysosomes, neutral molecules, metal ions, anions through cellular imaging, fluorescent probes can help shed light on the physiological and pathophysiological path ways. Since these biomolecules are produced in low concentrations in the biochemical pathways, general analytical techniques either fail to detect or are not sensitive enough to differentiate the relative concentrations. During my Ph.D. study, I exploited synthetic organic techniques to design and synthesize fluorescent probes with desirable properties such as high water solubility, high sensitivity and with varying fluorescent quantum yields. I synthesized a highly water soluble BOIDPY-based turn-on fluorescent probe for endogenous nitric oxide. I also synthesized a series of cell membrane permeable near infrared (NIR) pH activatable fluorescent probes for lysosomal pH sensing. Fluorescent dyes are molecular tools for designing fluorescent bio imaging probes. This prompted me to design and synthesize a hybrid fluorescent dye with a functionalizable chlorine atom and tested the chlorine re-activity for fluorescent probe design. Carbohydrate and protein interactions are key for many biological processes, such as viral and bacterial infections, cell recognition and adhesion, and immune response. Among several analytical techniques aimed to study these interactions, electrochemical bio sensing is more efficient due to its low cost, ease of operation, and possibility for miniaturization. During my Ph.D., I synthesized mannose bearing aniline molecule which is successfully tested as electrochemical bio sensor. A Ferrocene-mannose conjugate with an anchoring group is synthesized, which can be used as a potential electrochemical biosensor.