900 resultados para Indução artificial
Resumo:
O objetivo do trabalho foi avaliar os efeitos de GA3, nas concentrações de 100; 200 e 300mg L-1 e do bioestimulante Stimulate®, em doses de 2,08; 4,17 e 6,25mL L-1, em duas aplicações via foliar, acrescidas de espalhante adesivo Silwett® a 0,05% e a exposição dos ramos à luminosidade, na indução floral e produtividade do maracujazeiro-amarelo, em condições de safra normal, em Araguari-MG. Aos 30 dias após a primeira aplicação dos tratamentos, iniciaram-se as avaliações do número de flores, com contagens diárias, nos dois lados da espaldeira, nos meses de setembro de 2002 a março de 2003. As colheitas dos frutos foram realizadas semanalmente, no período de novembro de 2002 a abril de 2003, observando-se a produção. O GA3 e o Stimulate não proporcionaram efeito significativo no número de flores, nas sete épocas, assim como no número total de flores. Não houve efeito dos tratamentos para a produtividade e produção total de frutos. Os ramos sob luminosidade pela tarde apresentaram maior número de flores, nos meses de setembro, dezembro, fevereiro e março. A interação entre os tratamentos e a exposição dos ramos à luminosidade não foi significativa para o número de flores, nas épocas avaliadas.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Estudos em animais de laboratório sugerem um efeito antiulcerogênico do extrato de Casearia sylvestris. Esse extrato ainda não foi estudado para a profilaxia e/ou o tratamento de úlceras gástricas em equinos. Para avaliar a influência do extrato de C. sylvestris na permeabilidade gástrica à sacarose, seis equinos adultos foram submetidos a modelo de indução de úlceras gástricas. Os animais foram submetidos ao teste de permeabilidade à sacarose antes e ao término do protocolo de restrição alimentar intermitente, para detecção de ulceração gástrica. Durante os sete dias da indução, os animais foram submetidos a tratamentos diários via sondagem nasogástrica com extrato de C. sylvestris (9mg kg-1 de peso corpóreo) ou veículo (ágar). Após intervalo de 32 dias em piquete, para permitir a cicatrização das úlceras induzidas, cada animal foi submetido novamente ao protocolo de indução de úlcera gástrica, e os tratamentos foram alternados. Dessa forma, cada animal foi submetido a ambos os tratamentos em períodos distintos. A concentração de sacarose na urina foi determinada para cada amostra obtida, por cromatografia líquida de alto desempenho e detecção amperométrica pulsátil. Não foram observadas alterações nos exames clínicos e hemogramas. O tratamento com o extrato de C. sylvestris evitou o aumento da concentração de sacarose urinária (P<0,05) quando comparado ao veículo, sugerindo um efeito antiulcerogênico gástrico em equinos. Estudos mais amplos incluindo gastroscopia são necessários para avaliar a possibilidade de usar o extrato para a profilaxia e/ou o tratamento das úlceras gástricas em equinos.
Resumo:
Empregou-se a associação midazolam e detomidina para indução de anestesia com cetamina em 16 potros, machos e fêmeas, entre três e seis meses de idade, distribuídos aleatória e equitativamente em dois grupos (GI e GII). A todos os animais foram administrados midazolam, via intramuscular, na dose de 0,2mg/kg, e após 15 minutos, detomidina, via intravenosa, na dose de 0,02mg/kg. Os animais do GII receberam cetamina pela via intravenosa, dose 2,0mg/kg, três minutos após a administração de detomidina. Quinze minutos após o midazolam, ocorreram sedação e ligeira ataxia, e dois minutos após a administração da detomidina, decúbito lateral em todos os potros, com miorrelaxamento e presença dos reflexos de deglutição e miorrelaxamento, anal e oculo-palpebral. A associação midazolam/detomidina e cetamina provocou ausência dos reflexos de deglutição. Para todos os animais, o tempo de recuperação foi de 45-60 minutos, e temperatura retal e frequência respiratória permaneceram estáveis. Ocorreram bradicardia, bloqueio atrioventricular de segundo grau e aumento das pressões arteriais sistólica, diastólica e média após dois minutos da administração da detomidina. A associação midazolam/detomidina e cetamina demonstrou ser um método eficiente e seguro para a anestesia de potros hígidos.
Indução da expressão precoce de sintomas de Guignardia citricarpa em frutos de laranjeira 'pêra-rio'
Resumo:
O presente trabalho teve por objetivo avaliar a influência de diferentes concentrações de ethephon na expressão precoce de sintomas de Guignardia citricarpa em frutos de laranjeira 'Pêra-Rio'. Para tal, frutos assintomáticos e isentos de aplicações com fungicidas, com 20 e 28 semanas após a queda de pétalas, foram coletados em área de comprovada existência da doença, no município de Conchal-SP e levados ao Laboratório de Fitopatologia da FCAV/UNESP, em Jaboticabal-SP, onde foram tratados com soluções nas seguintes doses de ethephon: i) 1,57 g L-1; ii) 2,10 g L-1; iii) 2,42 g L-1; iv) Testemunha (água). Todas acrescidas de imazalil a 0,25 g L-1, para prevenir podridões de pós-colheita. Após os tratamentos, os frutos foram mantidos em câmara incubadora para B.O.D., calibrada à temperatura de 25ºC ±1ºC, por 15 dias. Posteriormente, os frutos foram submetidos a quatro avaliações, em intervalos semanais, sendo atribuídas notas que variaram de zero (ausência de sintomas) a 6 (sintomas severos). Os dados da severidade da doença observados nos frutos colhidos prematuramente e submetidos aos diferentes tratamentos com ethephon foram comparados aos observados em frutos ensacados e não ensacados, mantidos no campo até a maturação natural. Constatou-se maior equivalência de sintomas nos frutos com idade entre 20 e 28 semanas, quando estes foram tratados com 2,10 g L-1 de ethephon e avaliados entre 28 e 35 dias. Concluiu-se que o emprego de ethephon, nestas condições, viabilizou a expressão precoce dos sintomas da mancha preta em frutos contendo infecções quiescentes de G. citricarpa, com antecedência de, pelo menos, 105 dias antes da colheita. Tal resultado constitui-se, portanto, em alternativa de grande aplicabilidade na detecção precoce de sintomas de mancha preta.
Resumo:
Background: In bovines, more efficient management practices are important for maximizing profitability. In order to increase the pregnancy rates in artificial insemination (AI) programs, several hormonal protocols were developed to synchronize the follicular wave and the moment of ovulation in beef and dairy cattle. In dairy cattle, detection of estrus can be difficult due to a number of factors including the incidence of silent estrus. Hormonal treatments designed to control both luteal and follicular function has permitting efficient synchronizations of time of ovulation. Thus, the AI can be performed in a large number of animals on a fixed schedule without the need for detection of estrus. Using these management techniques, the fixed-time artificial insemination (TAI) can overcome the problem of accurate estrus detection and help in reducing the incidence of repeat breeding. In addition, with TAI in cattle operations, it is possible to facilitate management practices and commercialization, and to reduce the time and semen wasting with animals inseminated at incorrect times. The investigation of practical and efficient TAI protocols is important for reducing the labor and animal handling of TAI in dairy cattle, as well as for increasing the profitability of the cattle management system. This study was carried out in order to investigate the effectiveness of TAI in dairy heifers treated with a practical progesterone-based protocol.Materials, Methods & Results: This experiment was conducted at the university farm located in southwestern Brazil, during May 2009. Thirty-nine cycling crossbred dairy heifers were employed in this study. All animals received a single intramuscular injection of estradiol benzoate and intravaginal progesterone releasing device in a random stage of the estrous cycle (Day 0). on day 7 the animals were treated with PGF2a analogue and on day 9 the device was removed. Forty-eight hours after the device removal (day 11) a synthetic analogue of GnRH was administered and the animals were fixed-time artificially inseminated at the time of GnRH injection. The inseminations were performed using four different batches from the same Holstein bull. Among the heifers that were synchronized (87.2%), 30.8% ovulated until 24 h after TAI and 56.4% ovulated between 24 and 32 h after TAI. The conception rate was 61.5%. No effects of ovulation time in conception rates were detected. The conception rate from heifers that ovulated until 24 h after TAI was 58.3% and from heifers that ovulated between 24 and 32 h after TAI was 77.3%. The mean of ovulatory follicle in heifers that ovulated until 24 h was 14.3 mm and in heifers that ovulated between 24 and 32 h was 11.9 mm.Discussion: Taking together, the findings of the present study, along with those of others, emphasize the concept that development of practical methods for TAI offers significant advantages to dairy producers if conception rates are close or greater to those obtained after breeding at detected estrus. Thus, the results of the present study reinforce the possibility of making dairy cattle production more cost-effective using TAI. In conclusion, with the progesterone-based TAI protocol of the present experiment all synchronized animals ovulated up to 32 h after GnRH+TAI and no effects of ovulation time related to conception rate was detected. The exogenous control of luteal and follicular development facilitated the reproductive management and animal handling. Also, inseminating the heifers at the moment of GnRH injection in a progesterone-based TAI protocol is a practical strategy and provided satisfactory results regarding ovulation and conception rates in dairy heifers.
Resumo:
O cultivo associado é uma alternativa para culturas de ciclo longo e propriedades com limitação de área. Todavia, para o estabelecimento de associações, há necessidade de conhecer a tolerância das espécies ao sombreamento. O trabalho objetivou avaliar o crescimento de parte aérea, partição de fotoassimilados e produção de rizomas em plantas de taro 'Japonês' cultivadas sob intensidades e períodos de sombreamento artificial. Utilizou-se o delineamento de blocos ao acaso, com 13 tratamentos e quatro repetições. Os tratamentos foram constituídos de quatro intensidades de sombreamento (controle = pleno sol; 18; 30 e 50% de sombra, mantidos durante o ciclo todo), além da implementação das intensidades de sombra de 18; 30 e 50%, em três períodos (inicial = 0 a 3; intermediário = 3 a 6 e final = 6 a 9 meses). Aos 60; 90; 120; 150; 180; 210; 240 e 270 dias após o plantio (dat), avaliou-se crescimento de planta e partição de massa entre órgãos e aos 270 dat a produção de rizomas. Plantas sob sombreamento, sobretudo nas maiores intensidades e durante o ciclo todo, apresentaram maior produção de biomassa de parte aérea e de rizomas-mãe e filhos pequenos, em detrimento de rizomas-filho grandes, médios e comerciáveis. A intensidade de 18% de sombra, durante todo o ciclo ou nos períodos inicial e intermediário, foi a que menos afetou o desenvolvimento das plantas e produção de biomassa de rizomas-filho comerciáveis.
Resumo:
Objetivou-se estudar os efeitos de ácido giberélico (GA3) (i.a.), nas concentrações de 50 e 100 mg L-1, acrescido do espalhante adesivo Extravon® a 0,05%, em duas aplicações via foliar e do paclobutrazol (PBZ) (i.a.), em doses de 2 e 4 g por planta, aplicado via solo, em uma única aplicação, na antecipação da floração do maracujazeiro-amarelo, em Araguari-MG. O delineamento experimental empregado foi em parcelas subdivididas, com cinco tratamentos (parcelas) e dois tratamentos (subparcelas), com quatro repetições e quatro plantas por parcela. Foram identificados 12 ramos terciários por parcela, com seis ramos expostos à luminosidade predominante pela manhã e seis com luminosidade predominante à tarde. Avaliaram-se os dois lados da espaldeira aos 103 dias após a primeira aplicação dos tratamentos, observando-se o comprimento dos ramos e de entrenós, número de nós e de botões florais. Os reguladores não promoveram respostas significativas para o comprimento dos entrenós e o número de botões florais. Porém, observaram-se indícios de maior número de botões florais com PBZ 2 g. O maior comprimento dos ramos foi obtido com GA3 100 mg L-1, sob luminosidade, pela manhã. Ao se compararem os tratamentos nas duas condições de luminosidade, o PBZ 4 g, independentemente da condição de luminosidade, proporcionou o menor comprimento dos ramos.
Resumo:
This work describes the study and the implementation of the vector speed control for a three-phase Bearingless induction machine with divided winding of 4 poles and 1,1 kW using the neural rotor flux estimation. The vector speed control operates together with the radial positioning controllers and with the winding currents controllers of the stator phases. For the radial positioning, the forces controlled by the internal machine magnetic fields are used. For the radial forces optimization , a special rotor winding with independent circuits which allows a low rotational torque influence was used. The neural flux estimation applied to the vector speed controls has the objective of compensating the parameter dependences of the conventional estimators in relation to the parameter machine s variations due to the temperature increases or due to the rotor magnetic saturation. The implemented control system allows a direct comparison between the respective responses of the speed and radial positioning controllers to the machine oriented by the neural rotor flux estimator in relation to the conventional flux estimator. All the system control is executed by a program developed in the ANSI C language. The DSP resources used by the system are: the Analog/Digital channels converters, the PWM outputs and the parallel and RS-232 serial interfaces, which are responsible, respectively, by the DSP programming and the data capture through the supervisory system
Resumo:
Artificial Intelligence techniques are applied to improve performance of a simulated oil distillation system. The chosen system was a debutanizer column. At this process, the feed, which comes to the column, is segmented by heating. The lightest components become steams, by forming the LPG (Liquefied Petroleum Gas). The others components, C5+, continue liquid. In the composition of the LPG, ideally, we have only propane and butanes, but, in practice, there are contaminants, for example, pentanes. The objective of this work is to control pentane amount in LPG, by means of intelligent set points (SP s) determination for PID controllers that are present in original instrumentation (regulatory control) of the column. A fuzzy system will be responsible for adjusting the SP's, driven by the comparison between the molar fraction of the pentane present in the output of the plant (LPG) and the desired amount. However, the molar fraction of pentane is difficult to measure on-line, due to constraints such as: long intervals of measurement, high reliability and low cost. Therefore, an inference system was used, based on a multilayer neural network, to infer the pentane molar fraction through secondary variables of the column. Finally, the results shown that the proposed control system were able to control the value of pentane molar fraction under different operational situations
Resumo:
Several research lines show that sleep favors memory consolidation and learning. It has been proposed that the cognitive role of sleep is derived from a global scaling of synaptic weights, able to homeostatically restore the ability to learn new things, erasing memories overnight. This phenomenon is typical of slow-wave sleep (SWS) and characterized by non-Hebbian mechanisms, i.e., mechanisms independent of synchronous neuronal activity. Another view holds that sleep also triggers the specific enhancement of synaptic connections, carrying out the embossing of certain mnemonic traces within a lattice of synaptic weights rescaled each night. Such an embossing is understood as the combination of Hebbian and non-Hebbian mechanisms, capable of increasing and decreasing respectively the synaptic weights in complementary circuits, leading to selective memory improvement and a restructuring of synaptic configuration (SC) that can be crucial for the generation of new behaviors ( insights ). The empirical findings indicate that initiation of Hebbian plasticity during sleep occurs in the transition of the SWS to the stage of rapid eye movement (REM), possibly due to the significant differences between the firing rates regimes of the stages and the up-regulation of factors involved in longterm synaptic plasticity. In this study the theories of homeostasis and embossing were compared using an artificial neural network (ANN) fed with action potentials recorded in the hippocampus of rats during the sleep-wake cycle. In the simulation in which the ANN did not apply the long-term plasticity mechanisms during sleep (SWS-transition REM), the synaptic weights distribution was re-scaled inexorably, for its mean value proportional to the input firing rate, erasing the synaptic weights pattern that had been established initially. In contrast, when the long-term plasticity is modeled during the transition SWSREM, an increase of synaptic weights were observed in the range of initial/low values, redistributing effectively the weights in a way to reinforce a subset of synapses over time. The results suggest that a positive regulation coming from the long-term plasticity can completely change the role of sleep: its absence leads to forgetting; its presence leads to a positive mnemonic change
Resumo:
This work describes the study and the implementation of the speed control for a three-phase induction motor of 1,1 kW and 4 poles using the neural rotor flux estimation. The vector speed control operates together with the winding currents controller of the stator phasis. The neural flux estimation applied to the vector speed controls has the objective of compensating the parameter dependences of the conventional estimators in relation to the parameter machine s variations due to the temperature increases or due to the rotor magnetic saturation. The implemented control system allows a direct comparison between the respective responses of the speed controls to the machine oriented by the neural rotor flux estimator in relation to the conventional flux estimator. All the system control is executed by a program developed in the ANSI C language. The main DSP recources used by the system are, respectively, the Analog/Digital channels converters, the PWM outputs and the parallel and RS-232 serial interfaces, which are responsible, respectively, by the DSP programming and the data capture through the supervisory system
Resumo:
This work presents a model of bearingless induction machine with divided winding. The main goal is to obtain a machine model to use a simpler control system as used in conventional induction machine and to know its behavior. The same strategies used in conventional machines were used to reach the bearingless induction machine model, which has made possible an easier treatment of the involved parameters. The studied machine is adapted from the conventional induction machine, the stator windings were divided and all terminals had been available. This method does not need an auxiliary stator winding for the radial position control which results in a more compact machine. Another issue about this machine is the variation of inductances array also present in result of the rotor displacement. The changeable air-gap produces variation in magnetic flux and in inductances consequently. The conventional machine model can be used for the bearingless machine when the rotor is centered, but in rotor displacement condition this model is not applicable. The bearingless machine has two sets of motor-bearing, both sets with four poles. It was constructed in horizontal position and this increases difficulty in implementation. The used rotor has peculiar characteristics; it is projected according to the stator to yield the greatest torque and force possible. It is important to observe that the current unbalance generated by the position control does not modify the machine characteristics, this only occurs due the radial rotor displacement. The obtained results validate the work; the data reached by a supervisory system corresponds the foreseen results of simulation which verify the model veracity
Resumo:
This work presents a proposal for a voltage and frequency control system for a wind power induction generator. It has been developed na experimental structure composes basically by a three phase induction machine, a three phase capacitor and a reactive static Power compensator controlled by histeresys. lt has been developed control algorithms using conventional methods (Pl control) and linguistic methods (using concepts of logic and fuzzy control), to compare their performances in the variable speed generator system. The control loop was projected using the ADJDA PCL 818 model board into a Pentium 200 MHz compu ter. The induction generator mathematical model was studied throught Park transformation. It has been realized simulations in the Pspice@ software, to verify the system characteristics in transient and steady-state situations. The real time control program was developed in C language, possibilish verify the algorithm performance in the 2,2kW didatic experimental system