A 100MHz to 1GHz, 0.35V to 1.5V supply 256 x 64 SRAM mock using symmetrized 9T SRAM cell with controlled read

In this paper, we present Dynamic Voltage and Frequency Managed 256 x 64 SRAM block in 65nm technology, for frequency ranging from 100MHz to 1GHz. The total energy is minimized for any operating frequency in the above range and leakage energy is minimized during standby mode. Since noise margin of SRAM cell deteriorates at low voltages, we propose Static Noise Margin improvement circuitry, which symmetrizes the SRAM cell by controlling the body bias of pull down NMOS transistor. We used a 9T SRAM cell that isolates Read and Hold Noise Margin and has less leakage. We have implemented an efficient technique of pushing address decoder into zigzag-super-cut-off in stand-by mode without affecting its performance in active mode of operation. The Read Bit Line (RBL) voltage drop is controlled and pre-charge of bit lines is done only when needed for reducing power wastage.

A universal relation for the cohesive energy of nanoparticles

A universal relation between the cohesive energy and the particle size has been predicted based on the liquid-drop model. The universal relation is well supported by other theoretical models and the available experimental data. The universal relations for intermediate size range as well as for particles with very few atoms are discussed. A comparison of onset temperature of evaporation also establishes a universal relation.

Grand challenges for public health

What is the future for public health in the twenty-first century? Can we glean an idea about the future of public health from its past? As Winston Churchill once said: ‘[T]he further backward you look, the further forward you can see.’ What can we see in the history of public health that gives us an idea of where public health might be headed in the future? (Gruszin et al. 2012). In the twentieth century there was substantial progress in public health in Australia. These improvements were brought about through a number of factors. In part, improvements were due to increasing knowledge about the natural history of disease and its treatment. Added to this knowledge was a shifting focus from legislative measures to protect health, to the emergence of improved promotion and prevention strategies, and a general improvement in social and economic conditions for people living in countries such as Australia. Gruszin et al. (2012) consider the range of social and economic reforms of the twentieth century as the most important determinants of the public’s health at the start of the twenty-first century (Gruszin et al. 2012 p 201). The same could not, however, be said for second or third world countries, many of whom have the most fundamental of sanitary and health protection issues still to deal with. For example, in sub-Saharan Africa and in Russia the decline in life expectancy can be said to be related to a range of interconnected factors. In Russia, issues such as alcoholism, violence, suicide, accidents and cardiovascular disease could be contributing to the falling life expectancy (McMichael & Butler 2007). In sub-Saharan Africa, a range of factors, such as HIV/AIDS, poverty, malaria, tuberculosis, undernutrition, totally inadequate infrastructure, gender inequality, conflict and violence, political taboos and a complete lack of political will, have all contributed to a dramatic drop in life expectancy (McMichael & Butler 2007).

Modelling conical rock-bed solar thermal storage tank

An important application of solar thermal storage is for power generation or process heating. Low-temperature thermal storage in a packed rock bed is considered the best option for thermal storage for solar drying applications. In this chapter, mathematical formulations for conical have been developed. The model equations are solved numerically for charging/discharging cycles utilizing MATLAB. Results were compared with rock-bed storage with standard straight tank. From the simulated results, the temperature distribution was found to be more uniform in the truncated conical rock-bed storage. Also, the pressure drop over a long period of time in the conical thermal storage was as low as 25 Pa. Hence, the amount of power required from a centrifugal fan would be significantly lower. The flow of air inside the tank is simulated in SolidWorks software. From flow simulation, 3D modelling of flow is obtained to capture the actual scenario inside the tank.

Mathematical modelling of rock-bed solar thermal storage tank

An important application of thermal storage is solar energy for power generation or process heating. Low temperature thermal storage in a packed rock bed is considered best option for thermal storage for solar drying applications. In this paper, mathematical formulations for conical and cylindrical rock bed storage tanks have been developed. The model equations are solved numerically for charging/discharging cycles. From the simulated results, it was observed that for the same aspect ratio between the diameter and the length of the thermal storages, the conical thermal storage had better performance. The temperature distribution was found to be more uniform in the truncated conical shape rock bed storage. Also, the pressure drop over long period of time in the conical thermal storage was lower than that of the cylindrical thermal storage. Hence, the amount of power required from a centrifugal fan was lower.

Determination of the thermodynamic stability of TiB2

The standard free energy of formation of titanium boride (TiB2) Was measured by the Electro Motive Force (EMF) method (by using yttria doped thoria (YDT) as the solid electrolyte). Two galvanic cells viz. Cell (I): Pt, TiB2 (s), TiO2 (s), B (s) vertical bar YDT vertical bar NiO (s), Ni (s), Pt and cell (II): Pt, TiB2 (s), TiO2 (s), B (s) vertical bar YDT vertical bar FeO (s). Fe (s), Pt were constructed in order to determine the Delta(f)G degrees, of TiB2. Enthalpy increments on TiB2 were measured by using inverse drop calorimetry over the temperature range 583-1769 K. The heat capacity, entropy and the free energy function have been derived from these experimental data in the temperature range 298-1800 K. The mean value of the standard enthalpy of formation of TiB2 (Delta H-f(298)degrees (TiB2)) was obtained by combining these Delta(f)G degrees, values and the free energy functions of TiB2 derived from the drop calorimetry data. The mean values of Delta H-f(298)degrees (TiB2) derived from the Delta(f)G degrees, data obtained from cell I and II were -322 +/- 1.2 kJ mol(-1) and -323.3 +/- 2.1 kJ mol(-1), respectively. These values were found to be in very good agreement with the assessed data. (C) 2009 Elsevier B.V. All rights reserved.

Lifting the singular nature of a model for peeling of an adhesive tape

We investigate the dynamics of peeling of an adhesive tape subjected to a constant pull speed. Due to the constraint between the pull force, peel angle and the peel force, the equations of motion derived earlier fall into the category of differential-algebraic equations (DAE) requiring an appropriate algorithm for its numerical solution. By including the kinetic energy arising from the stretched part of the tape in the Lagrangian, we derive equations of motion that support stick-slip jumps as a natural consequence of the inherent dynamics itself, thus circumventing the need to use any special algorithm. In the low mass limit, these equations reproduce solutions obtained using a differential-algebraic algorithm introduced for the earlier singular equations. We find that mass has a strong influence on the dynamics of the model rendering periodic solutions to chaotic and vice versa. Apart from the rich dynamics, the model reproduces several qualitative features of the different waveforms of the peel force function as also the decreasing nature of force drop magnitudes.

Impact resistance and evaluation of retained strength on geotextiles

Over the last few decades, geotextiles have progressively been incorporated into geotechnical applications, especially in the field of coastal engineering. Geotextile materials often act as separator and a filter layer between rocks laid above and subgrade beneath. This versatile material has gradually substituted traditional granular materials because of its ease of installation, consistent quality and labour costefficiency. However, geotextiles often suffer damage during installation due to high dynamic bulk loading of rock placement. This can degrade geotextiles' mechanical strength. The properties considered in this paper include the impact resistance and retained strength of geotextiles. In general, the greater the impact energy applied to geotextiles, the greater the potential for damage. Results highlight the inadequacy of using index derived values as an indicator to determine geotextile performance on site because test results shows that geotextiles (staple fibre (SF) and continuous filament (CF)) with better mechanical properties did not outperform lower mechanical strength materials. The toughest CF product with a CBR index value of 9696N shows inferior impact resistance compared to SF product with the least CBR strength (2719N) given the same impact energy of 9.02 kJ. Test results also indicated that the reduction of strength for CF materials were much greater (between 20 and 50%) compared to SF materials (between 0 and 5%) when subjected to the same impact energy of 4.52 kJ.

The prankster’s passion: Using theatrical terms to unpack players motivations in popular social performance

Amongst social players, the prank, as a social performance form, holds a lot of potential to impact on personal, relational and social status within a group or between one group and another group. More than simply showing off, a prank in the strictest definition of the term, is a social performance in which one player, a prankster, deploys mischief, trickery or deceit, to cause a moment of anxiety, fear or anger about a happening for another spectator-become-collaborating-player, a prankee – to enhance social bonds, entertain, or comment on a social, cultural or political phenomenon. During a prank, the prankster’s ability to be creative, clever or culturally astute, and the prankee’s ability to be duped, be a good sport, play along, or even play/pay the prankster back, both become fodder for other spectators and society to scrutinize. In Australia, pranking traditions are popular with many social groups, from the community-building pranks of footballers, bucks parties and ‘drop bear’ tales told to tourists, to the more controversial pranks of radio shock jocks, activists and artists. In this paper, I consider whether theatrical terms – theoretical terms from the stage such as actor, acting, objective, arc, performance, audience and emotion, such as those offered by Joseph Roach – are useful in understanding the passion some social players show for pranksterism. Are theatrical terms such as Roach’s as useful as analysts of social self-performance such as Erving Goffman suggest they are? Do they assist in understanding the personal actions, reactions and emotions of prankster and prankee? Do they assist in understanding the power relations between prankster and prankee? Do they assist in understanding the relation between the prank – be it an everyday prank amongst families, friends and coworkers, an entertainment program prank of the sort seen on Prank Patrol, Punked or Scare Tactics, or an activist pranks perpetrated by a guerrilla artist, ‘jammers’ or ‘hackers’ intent on turning dominant social systems back on themselves – the social players, and the public sphere in which the prank takes place? I reflect on how reading pranks as performances, by players, for highly participatory audiences, helps understand why they are so prevalent, and so recurrent across times, cultures and contexts, and also so controversial when not performed well enough – or when performed too well – prompting outrage from the prankster, prankee or society as passionate as any debate about a performance by players in a theatre.

Monte Carlo Simulations of Molecular Clusters in Nucleation

A better understanding of the limiting step in a first order phase transition, the nucleation process, is of major importance to a variety of scientific fields ranging from atmospheric sciences to nanotechnology and even to cosmology. This is due to the fact that in most phase transitions the new phase is separated from the mother phase by a free energy barrier. This barrier is crossed in a process called nucleation. Nowadays it is considered that a significant fraction of all atmospheric particles is produced by vapor-to liquid nucleation. In atmospheric sciences, as well as in other scientific fields, the theoretical treatment of nucleation is mostly based on a theory known as the Classical Nucleation Theory. However, the Classical Nucleation Theory is known to have only a limited success in predicting the rate at which vapor-to-liquid nucleation takes place at given conditions. This thesis studies the unary homogeneous vapor-to-liquid nucleation from a statistical mechanics viewpoint. We apply Monte Carlo simulations of molecular clusters to calculate the free energy barrier separating the vapor and liquid phases and compare our results against the laboratory measurements and Classical Nucleation Theory predictions. According to our results, the work of adding a monomer to a cluster in equilibrium vapour is accurately described by the liquid drop model applied by the Classical Nucleation Theory, once the clusters are larger than some threshold size. The threshold cluster sizes contain only a few or some tens of molecules depending on the interaction potential and temperature. However, the error made in modeling the smallest of clusters as liquid drops results in an erroneous absolute value for the cluster work of formation throughout the size range, as predicted by the McGraw-Laaksonen scaling law. By calculating correction factors to Classical Nucleation Theory predictions for the nucleation barriers of argon and water, we show that the corrected predictions produce nucleation rates that are in good comparison with experiments. For the smallest clusters, the deviation between the simulation results and the liquid drop values are accurately modelled by the low order virial coefficients at modest temperatures and vapour densities, or in other words, in the validity range of the non-interacting cluster theory by Frenkel, Band and Bilj. Our results do not indicate a need for a size dependent replacement free energy correction. The results also indicate that Classical Nucleation Theory predicts the size of the critical cluster correctly. We also presents a new method for the calculation of the equilibrium vapour density, surface tension size dependence and planar surface tension directly from cluster simulations. We also show how the size dependence of the cluster surface tension in equimolar surface is a function of virial coefficients, a result confirmed by our cluster simulations.

Accountability for good faith in commercial dealing: The Carter v Boehm legacy 250 years on

In common law jurisdictions such as England, Australia, Canada and New Zealand good faith in contracting has long been recognised in specific areas of the law such as insurance law and franchising, and more recently the implied duties of good faith and mutual trust and convenience in employment contracts have generated a considerable volume of case law. Outside of these areas of law that may be characterised as being strongly‘relational’ in character,the courts in common law jurisdictions have been reluctant to embrace a more universal application of good faith in contracting and performance. However increasingly there are cases which support the proposition that there is a common law duty of good faith of general application to all commercial contracts. Most important in this context is the recent decision of the Supreme Court of Canada in Bhasin v Hrynew.1 However, this matter is by no means resolved in all common law jurisdictions. This article looks at the recent case law and literature and at various legislative incursions including statutes, codes of conduct and regulations impacting good faith in commercial dealings.

Carer perspectives of factors affecting placement trajectories of children in out-of-home care

Carers are at the frontline working with children in the care of the child protection system. This paper reports carer's views about key factors influencing the placement trajectories of children and young people living in out-of-home care in Queensland, Australia. The study sample included 21 foster and kinship carers with a minimum two-year experience in the carer role. Study data were from semi-structured telephone interviews in which carers shared their experiences of the factors impacting upon placement stability and placement movement. Carers' responses were analysed thematically. Data analysis yielded an overarching theme regarding placement trajectory: Carer engagement, and its three sub-themes; with the child; with the child protection system; and, with the caring role. Findings suggested that carer engagement and ‘fit’ are complex constructs that play critical influential roles in placement outcomes (stability or movement) for individual children in out-of-home care. It is argued that practice needs to be better grounded in these relational dynamics, and better aligned concerning the power differentials that exist.

Semi-empirical procedures for estimation of residual velocity and ballistic limit for impact on mild steel plates by projectiles

This paper deals with the development of simplified semi-empirical relations for the prediction of residual velocities of small calibre projectiles impacting on mild steel target plates, normally or at an angle, and the ballistic limits for such plates. It has been shown, for several impact cases for which test results on perforation of mild steel plates are available, that most of the existing semi-empirical relations which are applicable only to normal projectile impact do not yield satisfactory estimations of residual velocity. Furthermore, it is difficult to quantify some of the empirical parameters present in these relations for a given problem. With an eye towards simplicity and ease of use, two new regression-based relations employing standard material parameters have been discussed here for predicting residual velocity and ballistic limit for both normal and oblique impact. The latter expressions differ in terms of usage of quasi-static or strain rate-dependent average plate material strength. Residual velocities yielded by the present semi-empirical models compare well with the experimental results. Additionally, ballistic limits from these relations show close correlation with the corresponding finite element-based predictions.

Vibrational dynamics and boson peak in a supercooled polydisperse liquid

Vibrational density of states (VDOS) in a supercooled polydisperse liquid is computed by diagonalizing the Hessian matrix evaluated at the potential energy minima for systems with different values of polydispersity. An increase in polydispersity leads to an increase in the relative population of localized high-frequency modes. At low frequencies, the density of states shows an excess compared to the Debye squared-frequency law, which has been identified with the boson peak. The height of the boson peak increases with polydispersity and shows a rather narrow sensitivity to changes in temperature. While the modes comprising the boson peak appear to be largely delocalized, there is a sharp drop in the participation ratio of the modes that exist just below the boson peak indicative of the quasilocalized nature of the low-frequency vibrations. Study of the difference spectrum at two different polydispersity reveals that the increase in the height of boson peak is due to a population shift from modes with frequencies above the maximum in the VDOS to that below the maximum, indicating an increase in the fraction of the unstable modes in the system. The latter is further supported by the facilitation of the observed dynamics by polydispersity. Since the strength of the liquid increases with polydispersity, the present result provides an evidence that the intensity of boson peak correlates positively with the strength of the liquid, as observed earlier in many experimental systems.

Law student lifestyle pressures

One significant factor influencing student wellbeing is the degree to which their studies are subject to external lifestyle pressures. These pressures are relieved or exacerbated by choices students make around their approaches to study, and the amount of time they devote to work and leisure. This Chapter considers results from a 2012 survey of law students at the University of New South Wales (UNSW), Sydney, Australia. Those results are compared to results from a similar US law student survey, and comparable data from the UK and Australia more broadly. In addition, the UNSW study compares key lifestyle choices of undergraduate (LLB) and graduate (JD) law students. The significance of the analysis in this Chapter for understanding law students’ wellbeing is that comparing American and Australian law students’ lifestyle patterns provides insights into contextual variation between both groups, which is important to bear in mind when comparing American and Australian research on law students’ wellbeing, and appreciating the limits of such comparisons. In particular, much of the wellbeing literature to date has focused on course-based stressors, but in light of recent research indicating that improvements in students’ course-based experiences may not have a direct effect on law students’ elevated levels of psychological distress, it is important to understand the broader life pressures and stressors that may be impacting law students’ wellbeing.