Challenges facing carbon dioxide labelling of construction materials

In the absence of a benchmarking mechanism specifically designed for local requirements and characteristics, a carbon dioxide footprint assessment and labelling scheme for construction materials is urgently needed to promote carbon dioxide reduction in the construction industry. This paper reports on a recent interview survey of 18 senior industry practitioners in Hong Kong to elicit their knowledge and opinions concerning the potential of such a carbon dioxide labelling scheme. The results of this research indicate the following. A well-designed carbon dioxide label could stimulate demand for low carbon dioxide construction materials. The assessment of carbon dioxide emissions should be extended to different stages of material lifecycles. The benchmarks for low carbon dioxide construction materials should be based on international standards but without sacrificing local integrity. Administration and monitoring of the carbon dioxide labelling scheme could be entrusted to an impartial and independent certification body. The implementation of any carbon dioxide labelling schemes should be on a voluntary basis. Cost, functionality, quality and durability are unlikely to be replaced by environmental considerations in the absence of any compelling incentives or penalties. There are difficulties in developing and operating a suitable scheme, particularly in view of the large data demands involved, reluctance in using low carbon dioxide materials and limited environmental awareness.

Impact of organisational cultural factors on knowledge management in construction

Knowledge Management (KM) is a process that focuses on knowledge-related activities to facilitate knowledge creation, capture, transformation and use, with the ultimate aim of leveraging organisations’ intellectual capital to achieve organisational objectives. Organisational culture and climate have been identified as major catalysts to knowledge creation and sharing, and hence are considered important dimensions of KM research. The fragmented and hierarchical nature of the construction industry illustrates its difficulties to operate in a co-ordinated and homogeneous way when dealing with knowledge-related issues such as research and development, training and innovation. The culture and climate of organisations operating within the construction industry are profoundly shaped by the long-established characteristics of the industry, whilst also being influenced by the changes within the sector. Meanwhile, the special project-based structure of construction organisations constitutes additional challenges in facing knowledge production. The study this paper reports on addresses the impact of organisational culture and climate on the intensity of KM activities within construction organisations, with specific focus on the managerial activities that help to manage these challenges and to facilitate KM. A series of semi-structured interviews were undertaken to investigate the KM activities of the contractors operating in Hong Kong. The analysis on the qualitative data revealed that leadership on KM, innovation management, communication management and IT development were key factors that impact positively on the KM activities within the organisations under investigation.

Earthworks planning for road construction projects : a case study

In this paper we construct earthwork allocation plans for a linear infrastructure road project. Fuel consumption metrics and an innovative block partitioning and modelling approach are applied to reduce costs. 2D and 3D variants of the problem were compared to see what effect, if any, occurs on solution quality. 3D variants were also considered to see what additional complexities and difficulties occur. The numerical investigation shows a significant improvement and a reduction in fuel consumption as theorised. The proposed solutions differ considerably from plans that were constructed for a distance based metric as commonly used in other approaches. Under certain conditions, 3D problem instances can be solved optimally as 2D problems.

From outpost to outback : project career paths in Australia

With the growth in project management as a form of work organisation in many sectors of the economy has come the significant rise in the number of project managers and project team members. This change in work organisation brings issues in forging career paths and determining career support in work situations that are often dynamic, short lived and intense. In the relatively small but substantially robust Australian economy, a unique labour market and the tyranny of distance bring their own difficulties. Innovative and collaborative project structures and increasing prevalence of contract work provide both challenges and opportunities for new career pathways in many industries. A growing percentage of Australia's workforce is employed in project-based or project-oriented organisations, leading to the claim that Australia is a project-based economy. This provided a context for our research into the career paths and the issues of career management for project managers working in a project based economy. Using in-depth interviews with project managers from three industry areas we found generational and gender differences in experiences of work, workplace support and mentoring for career development. For a continued strong performance in this economy,organisations that employ project personnel will need to consider how they will ensure the supply of high quality project professionals into the future.

Communicating in the pre-hospital emergency environment

Aim. To develop and evaluate the implementation of a communication board for paramedics to use with patients as an augmentative or alternative communication tool to address communication needs of patients in the pre-hospital setting. Method. A double-sided A4-size communication board was designed specifically for use in the pre-hospital setting by the Queensland Ambulance Service and Disability and Community Care Services. One side of the board contains expressive messages that could be used by both the patient and paramedic. The other side contains messages to support patients’ understanding and interaction tips for the paramedic. The communication board was made available in every ambulance and patient transport vehicle in the Brisbane Region. Results. A total of 878 paramedics completed a survey that gauged which patient groups they might use the communication board with. The two most common groups were patients from culturally and linguistically diverse backgrounds and children. Staff reported feeling confident in using the board, and 72% of interviewed paramedics agreed that the communication board was useful for aiding communication with patients. Feedback from paramedics suggests that the board is simple to use, reduces patient frustration and improves communication. Conclusion. These results suggest that a communication board can be applied in the pre-hospital setting to support communication success with patients. What is known about the topic? It is imperative that communication between patient and paramedic is clear and effective. Research has shown that communication boards have been effective with people with temporary or permanent communication difficulties. What does this paper add? This is the first paper outlining the development and use of a communication board by paramedics in the pre-hospital setting in Australia. The paper details the design of the communication board for the unique pre-hospital environment. The paper provides some preliminary data on the use of the communication board with certain patient groups and its effectiveness as an alternative communication tool. What are the implications for practitioners? The findings support the use of the tool as a viable option in supporting the communication between paramedics and a range of patients. It is not suggested that this communication board will meet the complete communication needs of any individual in this environment, but it is hoped that the board’s presence within the Queensland Ambulance Service may result in paramedics introducing the board on occasions where communication with a patient is challenging.

Towards tacit knowledge sharing over social web tools

Purpose - Researchers debate whether tacit knowledge sharing through Information Technology (IT) is actually possible. However, with the advent of social web tools, it has been argued that most shortcomings of tacit knowledge sharing are likely to disappear. This paper has two purposes: firstly, to demonstrate the existing debates in the literature regarding tacit knowledge sharing using IT, and secondly, to identify key research gaps that lay the foundations for future research into tacit knowledge sharing using social web. Design/methodology/approach - This paper reviews current literature on IT-mediated tacit knowledge sharing and opens a discussion on tacit knowledge sharing through the use of social web. Findings - First, the existing schools of thoughts in regards to IT ability for tacit knowledge sharing are introduced. Next, difficulties of sharing tacit knowledge through the use of IT are discussed. Then, potentials and pitfalls of social web tools are presented. Finally, the paper concludes that whilst there are significant theoretical arguments supporting that the social web facilitates tacit knowledge sharing there is a lack of empirical evidence to support these arguments and further work is required. Research limitations/implications - The limitations of the review includes: covering only papers that were published in English, issues of access to full texts of some resources, possibility of missing some resources due to search strings used or limited coverage of databases searched. Originality/value - The paper contributes to the fast growing literature on the intersection of KM and IT particularly by focusing on tacit knowledge sharing in social media space. The paper highlights the need for further studies in this area by discussing the current situation in the literature and disclosing the emerging questions and gaps for future studies.

Personalised information gathering and recommender systems : techniques and trends

With the explosive growth of resources available through the Internet, information mismatching and overload have become a severe concern to users. Web users are commonly overwhelmed by huge volume of information and are faced with the challenge of finding the most relevant and reliable information in a timely manner. Personalised information gathering and recommender systems represent state-of-the-art tools for efficient selection of the most relevant and reliable information resources, and the interest in such systems has increased dramatically over the last few years. However, web personalization has not yet been well-exploited; difficulties arise while selecting resources through recommender systems from a technological and social perspective. Aiming to promote high quality research in order to overcome these challenges, this paper provides a comprehensive survey on the recent work and achievements in the areas of personalised web information gathering and recommender systems. The report covers concept-based techniques exploited in personalised information gathering and recommender systems.

Methodological issues in defining aggression for content analyses of sexually explicit material

There exists an important tradition of content analyses of aggression in sexually explicit material. The majority of these analyses use a definition of aggression that excludes consent. This article identifies three problems with this approach. First, it does not distinguish between aggression and some positive acts. Second, it excludes a key element of healthy sexuality. Third, it can lead to heteronormative definitions of healthy sexuality. It would be better to use a definition of aggression such as Baron and Richardson's (1994) in our content analyses, that includes a consideration of consent. A number of difficulties have been identified with attending to consent but this article offers solutions to each of these.

Speaker diarization : "who spoke when"

Speaker diarization is the process of annotating an input audio with information that attributes temporal regions of the audio signal to their respective sources, which may include both speech and non-speech events. For speech regions, the diarization system also specifies the locations of speaker boundaries and assign relative speaker labels to each homogeneous segment of speech. In short, speaker diarization systems effectively answer the question of ‘who spoke when’. There are several important applications for speaker diarization technology, such as facilitating speaker indexing systems to allow users to directly access the relevant segments of interest within a given audio, and assisting with other downstream processes such as summarizing and parsing. When combined with automatic speech recognition (ASR) systems, the metadata extracted from a speaker diarization system can provide complementary information for ASR transcripts including the location of speaker turns and relative speaker segment labels, making the transcripts more readable. Speaker diarization output can also be used to localize the instances of specific speakers to pool data for model adaptation, which in turn boosts transcription accuracies. Speaker diarization therefore plays an important role as a preliminary step in automatic transcription of audio data. The aim of this work is to improve the usefulness and practicality of speaker diarization technology, through the reduction of diarization error rates. In particular, this research is focused on the segmentation and clustering stages within a diarization system. Although particular emphasis is placed on the broadcast news audio domain and systems developed throughout this work are also trained and tested on broadcast news data, the techniques proposed in this dissertation are also applicable to other domains including telephone conversations and meetings audio. Three main research themes were pursued: heuristic rules for speaker segmentation, modelling uncertainty in speaker model estimates, and modelling uncertainty in eigenvoice speaker modelling. The use of heuristic approaches for the speaker segmentation task was first investigated, with emphasis placed on minimizing missed boundary detections. A set of heuristic rules was proposed, to govern the detection and heuristic selection of candidate speaker segment boundaries. A second pass, using the same heuristic algorithm with a smaller window, was also proposed with the aim of improving detection of boundaries around short speaker segments. Compared to single threshold based methods, the proposed heuristic approach was shown to provide improved segmentation performance, leading to a reduction in the overall diarization error rate. Methods to model the uncertainty in speaker model estimates were developed, to address the difficulties associated with making segmentation and clustering decisions with limited data in the speaker segments. The Bayes factor, derived specifically for multivariate Gaussian speaker modelling, was introduced to account for the uncertainty of the speaker model estimates. The use of the Bayes factor also enabled the incorporation of prior information regarding the audio to aid segmentation and clustering decisions. The idea of modelling uncertainty in speaker model estimates was also extended to the eigenvoice speaker modelling framework for the speaker clustering task. Building on the application of Bayesian approaches to the speaker diarization problem, the proposed approach takes into account the uncertainty associated with the explicit estimation of the speaker factors. The proposed decision criteria, based on Bayesian theory, was shown to generally outperform their non- Bayesian counterparts.

Integrating crowd-behavior modeling into military simulation using game technology

Crowds of noncombatants play a large and increasingly recognized role in modern military operations and often create substantial difficulties for the combatant forces involved. However, realistic models of crowds are essentially absent from current military simulations. To address this problem, the authors are developing a crowd simulation capable of generating crowds of noncombatant civilians that exhibit a variety of realistic individual and group behaviors at differing levels of fidelity. The crowd simulation is interoperable with existing military simulations using a standard, distributed simulation architecture. Commercial game technology is used in the crowd simulation to model both urban terrain and the physical behaviors of the human characters that make up the crowd. The objective of this article is to present the design and development process of a simulation that integrates commercially available game technology with current military simulations to generate realistic and believable crowd behavior.

Crowd modelling for military simulations using game technology

Crowds of non-combatants play a large and increasingly recognized role in modern military operations, and often create substantial difficulties for the combatant forces involved. However, realistic models of crowds are essentially absent from current military simulations. To address this problem we are developing a crowd simulation capable of generating crowds of non-combatant civilians that exhibit a variety of realistic individual and group behaviours at differing levels of fidelity. The crowd simulation is interoperable with existing military simulations using a standard distributed simulation architecture. Commercial game technology is utilized in the crowd simulation to model both urban terrain and the physical behaviours of the human characters that make up the crowd. The objective of this paper is to present the process involved with the design and development of a simulation that integrates commercially available game technology with current military simulations in order to generate realistic and believable crowd behaviour.

Not just another ball game : young adult and adult football fictions are different

Current media attention on the crossover novel highlights the increasing permeability of the boundaries between young adult and adult fiction. This paper will focus upon some of the difficulties around definitions of young adult fiction before considering the fiction of football, or soccer as it is more commonly known in Australia. The football genre exhibits a number of discrete and identifiable differences between young adult and adult readerships including, for example, the role of the protagonist, and the narrative’s distance from the game. This paper will use Franco Moretti’s Mapping as Distant Reading model of abstraction to highlight and unpack these and other characteristic differences in the narratological and stylistic techniques employed across adult and young adult texts. Close reading analysis of the adult football fiction Striker (1992) by Hunter Davies and young adult football fiction Lucy Zeezou’s Goal (2008) by Liz Deep-Jones’ will further illustrate the range of tensions and divergences as they are reflected across those readerships. The texts have been selected because they speak to themes of fear and safety; Joe Swift (Striker) is driven by a need to move away from childhood poverty and insecurity, while Lucy Zeezou shelters a homeless friend. With both protagonists being kidnapped for ransom for example, the texts have also been selected for their striking similarities in form and content.

Towards a capabilities database to inform inclusive design : Experimental investigation of effective survey-based predictors of human-product interaction

A key issue in the field of inclusive design is the ability to provide designers with an understanding of people's range of capabilities. Since it is not feasible to assess product interactions with a large sample, this paper assesses a range of proxy measures of design-relevant capabilities. It describes a study that was conducted to identify which measures provide the best prediction of people's abilities to use a range of products. A detailed investigation with 100 respondents aged 50-80 years was undertaken to examine how they manage typical household products. Predictor variables included self-report and performance measures across a variety of capabilities (vision, hearing, dexterity and cognitive function), component activities used in product interactions (e.g. using a remote control, touch screen) and psychological characteristics (e.g. self-efficacy, confidence with using electronic devices). Results showed, as expected, a higher prevalence of visual, hearing, dexterity, cognitive and product interaction difficulties in the 65-80 age group. Regression analyses showed that, in addition to age, performance measures of vision (acuity, contrast sensitivity) and hearing (hearing threshold) and self-report and performance measures of component activities are strong predictors of successful product interactions. These findings will guide the choice of measures to be used in a subsequent national survey of design-relevant capabilities, which will lead to the creation of a capability database. This will be converted into a tool for designers to understand the implications of their design decisions, so that they can design products in a more inclusive way.

Do cyberbullies suffer too? Cyberbullies' perceptions of the harm they cause to others and to their own mental health

While it is recognised that there are serious correlates for students who are victims of cyberbullying including depression, anxiety, lower self-esteem and social difficulties, there has been little research attention paid to the mental health of students who cyberbully. It is known that students who traditionally bully report they feel indifferent to their victims, showing a lack of empathy and that they themselves are at increased risk for psychosocial adjustment. However, there is scant research on the mental health associations of students who cyberbully or their awareness of their impact on others. The current study sought to ascertain from Australian students who reported cyberbullying others in years 6 to 12 (10-19 years of age), their perceptions of their mental health and the harm they caused to and the impact their actions had, on their victims. Most students who cyberbullied did not think that their bullying was harsh or had an impact on their victims. They reported more social difficulties and higher scores on stress, depression and anxiety scales than those students who were not involved in any bullying. The implications of these findings for the mental health of the cyberbullies and for psychologists in schools who assist them, are dis-cussed.

Diversity and Differentiation

New ways of working are being embraced by early childhood educators as they cope with demands from national reforms and changing communities. While reformers are pressing for social equity and improved outcomes for families and children, communities are diverging in terms of ethnicity, culture, language and socioeconomic status. As a consequence, early childhood educators are being challenged to expand their existing repertoire of practices in order to more effectively provide quality learning experiences for every child in their care. Practice enhancement and differentiated pedagogy are needed to address the additional needs of an increasing number of diverse learners. Community expectations are particularly focused on better educational supports for children in five cluster areas: • Culturally diverse and Indigenous backgrounds • ‘at risk’ because of socio-economic and abuse conditions • Communicative, emotional and behavioural disorders • Disabilities and learning difficulties and • Recognised gifts and talents This chapter focuses on some everyday ractices that can be used strategically to better support all children, including those with additional educational needs. All practices are well supported in the literature and are substantiated by either research findings or strong, socially determined values. They also very ‘doable’ and sustainable in today’s dynamic and multifaceted early childhood settings. Seven keys practices will be introduced, together with examples of how they can be applied to both enhance the learning of individual children and to strengthen a sense of group belonging. The practices are: • Having positive beliefs about all children • Learning about each child • Building meaningful relationships around the child • Creating supportive learning environments for the child • Providing engaging learning experiences for the child • Differentiating instruction for the child • Using child progress data to improve learning and teaching