High-resolution IP25 of three sediment cores in the western North Pacific and Bering Sea

Due to its strong influence on heat and moisture exchange between the ocean and the atmosphere, sea ice is an essential component of the global climate system. In the context of its alarming decrease in terms of concentration, thickness and duration, understanding the processes controlling sea-ice variability and reconstructing paleo-sea-ice extent in polar regions have become of great interest for the scientific community. In this study, for the first time, IP25, a recently developed biomarker sea-ice proxy, was used for a high-resolution reconstruction of the sea-ice extent and its variability in the western North Pacific and western Bering Sea during the past 18,000 years. To identify mechanisms controlling the sea-ice variability, IP25 data were associated with published sea-surface temperature as well as diatom and biogenic opal data. The results indicate that a seasonal sea-ice cover existed during cold periods (Heinrich Stadial 1 and Younger Dryas), whereas during warmer intervals (Bølling-Allerød and Holocene) reduced sea ice or ice-free conditions prevailed in the study area. The variability in sea-ice extent seems to be linked to climate anomalies and sea-level changes controlling the oceanographic circulation between the subarctic Pacific and the Bering Sea, especially the Alaskan Stream injection though the Aleutian passes.

Megnetic susceptibility of a subtropical South Atlantic transect

The Mid-Pleistocene transition (MPT) of the global climate system, initiated by a shift towards much larger northern hemisphere ice shields at around 920 ka and ending with predominance of 100 kyr ice age cyclicity since about 640 ka, is one of the fundamental enigmas in Quaternary climate evolution. Climate proxy records not exclusively linked to global ice volume are necessary to advance understanding of the MPT. Here we present a high-resolution Pleistocene magnetic susceptibility time series of 12 sediment cores from the subtropical South Atlantic essentially reflecting dissolution driven variations in carbonate accumulation controlled by changes in deep water circulation. In addition to characteristics known from delta18O records, the data sets reveal three remarkable features intimately related to the MPT: (1) an all-Pleistocene minimum of carbonate accumulation in the South Atlantic at 920 ka, (2) a MPT interim state of reduced carbonate deposition, indicating that the MPT period may have been a discrete state of the Pleistocene deep water circulation and climate system and (3) a terminal MPT event at around 540-530 ka documented in several peculiarities such as thick laminated layers of the giant diatom Ethmodiscus rex.

Sedimentology and Nd isotope ratios of sediment core PS72/410-1

The freshwater budget of the Arctic Ocean is a key component governing the deep water formation in the North Atlantic and the global climate system. We analyzed the isotopic composition of neodymium (epsilon-Nd) in authigenic phases of marine sediments on the Mendeleev Ridge in the western Arctic Ocean spanning an estimated time interval from present to about 75 ka BP. This continuous record was used to reconstruct the epsilon-Nd of the polar deep water (PDW) and changes in freshwater sources to the PDW through time. Three deviations in epsilon-Nd from a long term average of -10.2 were identified at estimated 46-51, 35-39 and 13-21 ka BP. The estimated 46-51 ka BP event can be traced to bursting of ice-dammed lakes accompanying the collapse of the Barents-Kara Ice Sheet, which would have released radiogenic Nd to the eastern Arctic Ocean. The cyclonic surface circulation in the eastern Arctic Ocean must have been stronger than at present for the event to be recorded on the Mendeleev Ridge. For the 35-39 and 13-21 ka BP events, it is likely that the Laurentide Ice Sheet (LIS) supplied the unradiogenic freshwater. The configuration of the anticyclonic circulation in the western Arctic was probably similar to today or expanded eastward. Our simple mass balance calculations suggest that large amounts of freshwater were released but due to significant deep water formation within the Arctic Ocean, the effect on the formation of NADW was probably minor.

Study of the fronts of Johnsons and Hurd Glaciers (Livingston Island, Antarctica) from 1957 to 2013, with links to shapefiles

The study of glacier fronts combines different geomatics measurement techniques as the classic survey using total station or theodolite, technical GNSS (Global Navigation Satellite System), using laser-scanner or using photogrammetry (air or ground). The measure by direct methods (classical surveying and GNSS) is useful and fast when accessibility to the glaciers fronts is easy, while it is practically impossible to realize, in the case of glacier fronts that end up in the sea (tide water glaciers). In this paper, a methodology that combines photogrammetric methods and other techniques for lifting the front of the glacier Johnsons, inaccessible is studied. The images obtained from the front, come from a non-metric digital camera; its georeferencing to a global coordinate system is performed by measuring points GNSS support in accessible areas of the glacier front side and applying methods of direct intersection in inaccessible points of the front, taking measurements with theodolite. The result of observations obtained were applied to study the temporal evolution (1957-2014) of the position of the Johnsons glacier front and the position of the Argentina, Las Palmas and Sally Rocks lobes front (Hurd glacier).

Export Restrictions in relation to Extractive Industries

A new E15 Think Piece by Ilaria Espa produced under the E15Initiative (E15). Implemented jointly by the International Centre for Trade and Sustainable Development (ICTSD) and the World Economic Forum, the E15 convenes world-class experts and institutions to generate strategic analysis and recommendations for government, business and civil society geared towards strengthening the global trade system. This paper considers concrete policy options to better regulate the use of export restrictions in relation to extractive industries. It briefly describes recent trends in the use of export restrictions on mineral and energy resources. It gives an account of the main shortcomings in the WTO legal treatment of export restrictions. It accordingly discusses possible avenues for reforming existing WTO disciplines in the interest of secure access to supplies, while still taking into account the need to preserve some policy space for host countries to use such measures as legitimate development tools.

To fuse or not to fuse? Assessing the case for convergent disciplines on goods and services trade

Think piece by Pierre Sauvé for the E15 Initiative on Strengthening the Global Trade System In his latest essay for the ICTSD-World Economic Forum E15 initiative on Strengthening the Global Trade and Investment System for Sustainable Development, WTI Director of External Programmes and Academic Partnerships and faculty member Pierre Sauvé explores the case for fusing the law of goods with that of services in a world of global value chains. The paper does so by directing attention to the questions of whether the current architectures of multilateral and preferential trade governance are compatible with a world of trade in tasks; whether the existing rules offer globally active firms a coherent structure for doing business in a predictable environment; whether it is feasible to redesign the structure and content of existing trade rules to align them to the reality of production fragmentation; and what steps can be envisaged to better align policy and realities in the marketplace if the prospects for restructuring appear unfavourable. The paper argues that fusing trade disciplines for goods and services is neither needed nor feasible and may actually deflect attention from a number of worthwhile policy initiatives where more realistic (if never easily secured) prospects of generic rule-making may well exist.

Arquitectura cognitiva basada en el gradiente sensorial y su aplicación a la robótica móvil

El objetivo de esta tesis es el desarrollo de un sistema completo de navegación, aprendizaje y planificación para un robot móvil. Dentro de los innumerables problemas que este gran objetivo plantea, hemos dedicado especial atención al problema del conocimiento autónomo del mundo. Nuestra mayor preocupación ha sido la de establecer mecanismos que permitan, a partir de información sensorial cruda, el desarrollo incremental de un modelo topológico del entorno en el que se mueve el robot. Estos mecanismos se apoyan invariablemente en un nuevo concepto propuesto en esta tesis: el gradiente sensorial. El gradiente sensorial es un dispositivo matemático que funciona como un detector de sucesos interesantes para el sistema. Una vez detectado uno de estos sucesos, el robot puede identificar su situación en un mapa topológico y actuar en consecuencia. Hemos denominado a estas situaciones especiales lugares sensorialmente relevantes, ya que (a) captan la atención del sistema y (b) pueden ser identificadas utilizando la información sensorial. Para explotar convenientemente los modelos construidos, hemos desarrollado un algoritmo capaz de elaborar planes internalizados, estableciendo una red de sugerencias en los lugares sensorialmente relevantes, de modo que el robot encuentra en estos puntos una dirección recomendada de navegación. Finalmente, hemos implementado un sistema de navegación robusto con habilidades para interpretar y adecuar los planes internalizados a las circunstancias concretas del momento. Nuestro sistema de navegación está basado en la teoría de campos de potencial artificial, a la que hemos incorporado la posibilidad de añadir cargas ficticias como ayuda a la evitación de mínimos locales. Como aportación adicional de esta tesis al campo genérico de la ciencia cognitiva, todos estos elementos se integran en una arquitectura centrada en la memoria, lo que pretende resaltar la importancia de ésta en los procesos cognitivos de los seres vivos y aporta un giro conceptual al punto de vista tradicional, centrado en los procesos. The general objective of this thesis is the development of a global navigation system endowed with planning and learning features for a mobile robot. Within this general objective we have devoted a special effort to the autonomous learning problem. Our main concern has been to establish the necessary mechanisms for the incremental development of a topological model of the robot’s environment using the sensory information. These mechanisms are based on a new concept proposed in the thesis: the sensory gradient. The sensory gradient is a mathematical device which works like a detector of “interesting” environment’s events. Once a particular event has been detected the robot can identify its situation in the topological map and to react accordingly. We have called these special situations relevant sensory places because (a) they capture the system’s attention and (b) they can be identified using the sensory information. To conveniently exploit the built-in models we have developed an algorithm able to make internalized plans, establishing a suggestion network in the sensory relevant places in such way that the robot can find at those places a recommended navigation direction. It has been also developed a robust navigation system able to navigate by means of interpreting and adapting the internalized plans to the concrete circumstances at each instant, i.e. a reactive navigation system. This reactive system is based on the artificial potential field approach with the additional feature introduced in the thesis of what we call fictitious charges as an aid to avoid local minima. As a general contribution of the thesis to the cognitive science field all the above described elements are integrated in a memory-based architecture, emphasizing the important role played by the memory in the cognitive processes of living beings and giving a conceptual turn in the usual process-based approach.

Mobile Indoor Augmented Reality. Exploring applications in hospitality environments.

Augmented reality (AR) is been increasingly used in mobile devices. Most of the available applications are set to work outdoors, mainly due to the availability of a reliable positioning system. Nevertheless, indoor (smart) spaces offer a lot of opportunities of creating new service concepts. In particular, in this paper we explore the applicability of mobile AR to hospitality environments (hotels and similar establishments). From the state-of-the-art of technologies and applications, a portfolio of services has been identified and a prototype using off-the-shelf technologies has been designed. Our objective is to identify the next technological challenges to overcome in order to have suitable underlying infrastructures and innovative services which enhance the traveller?s experience.

Spanish National GPS Reference Station Network (ERGPS)

The Instituto Geográfico Nacional de España, thought its geodesy department, since 1997 has carried out the establisment of a GPS Reference Station Network (ERGPS) delivered all around Spain which allows millimetric co-ordinate results, as well as velocity fields in a Global Reference System (ITRFxx). It serves as support for other geodetic networks. Some of these stations are being integrated into the EUREF (EUropean REference Frame) Permanent Station Network. The ERGPS forms the zero order of the Spanish new geodesy

Urbanization, socio-economic changes and population growth in Brazil: dietary shifts and environmental implications.

Population growth, economic globalization, improving living standards and urbanization are causing important changes in the global food system and modifying the dietary habits in many parts of the world (Molden, 2007; Godfray et al., 2010). The nutritional transition (linked to the development of countries and the increasing wealth of its population) implies a shift away from traditional staple food such as roots and tuber vegetables and a rise in consumption of meat and milk products, refined and processed foods, as well as sugars, oils and fats (Ambler-Edwards et al., 2009). The contemporary food system puts significant pressure on natural resources, especially on land and water, because the growing food demand pushes the agricultural frontier beyond, causing large impacts on ecosystems (Ambler-Edwards et al. 2009: 11-18). Also, the trend towards richer diets in animal proteins and processed food adds further pressure on the environment, since it requires larger amount of water and land to be produced (Allan, 2011; Mekonnen and Hoekstra, 2012).

Joint assessment of water and agricultural policies: a Pan-European multidimensional modelling approach.

Sustainability and the food-water-environment nexus. Food-water linkages in global agro-economic models. The CAPRI water module. Potential to jointly assess food and water policies. Pilot case study. Further development.

Evaluación de los co-beneficios sobre el desarrollo sostenible y la reducción de la pobreza de proyectos de mitigación del cambio climático en Brasil

El cambio climático y los diferentes aspectos del concepto de “desarrollo” están intrínsecamente interconectados. Por un lado, el desarrollo económico de nuestras sociedades ha contribuido a un aumento insostenible de las emisiones de gases de efecto invernadero, las cuales están desestabilizando el sistema climático global, generando al mismo tiempo una distribución desigual de la capacidad de las personas para hacer frente a estos cambios. Por otro lado, en la actualidad existe un amplio consenso sobre que el cambio climático impacta directamente y de manera negativa sobre el denominando desarrollo sostenible. De igual manera, cada vez existe un mayor consenso de que el cambio climático va a desafiar sustancialmente nuestra capacidad de erradicar la pobreza a medio y largo plazo. Ante esta realidad, no cabe duda de que las estrategias de adaptación son esenciales para mantener el desarrollo. Es por esto que hasta el momento, los mayores esfuerzos realizados por unir las agendas globales de la lucha contra la pobreza y del cambio climático se han dado en el entorno de la adaptación al cambio climático. Sin embargo, cada vez son más los actores que defienden, desde distintos escenarios, que existen sinergias entre la mitigación de emisiones y la mejora de las condiciones de vida de las poblaciones más vulnerables, favoreciendo así un “desarrollo sostenible” sin disminuir los recursos financieros destinados a la adaptación. Para hacer efectivo este potencial, es imprescindible identificar diseños de estrategias de mitigación que incrementen los resultados de desarrollo, contribuyendo al desarrollo sostenible al mismo tiempo que a reducir la pobreza. En este contexto se sitúa el objetivo principal de esta investigación, consistente en analizar los co-beneficios locales, para el desarrollo sostenible y la reducción la pobreza, de proyectos de mitigación del cambio climático que se implementan en Brasil. Por co-beneficios se entienden, en el lenguaje de las discusiones internacionales de cambio climático, aquellos beneficios que van más allá de la reducción de emisiones de Gases de Efecto Invernadero (GEI) intrínsecas por definición a los proyectos de mitigación. Los proyectos de mitigación más relevantes hasta el momento bajo el paraguas de la Convención Marco de las Naciones Unidas para el Cambio Climático (CMNUCC), son los denominados Mecanismos de Desarrollo Limpio (MDL) del Protocolo de Kioto. Sin embargo, existen alternativas de proyectos de mitigación (tales como los denominados “estándares adicionales” a los MDL de los Mercados Voluntarios de Carbono y las Tecnologías Sociales), que también serán tenidos en cuenta en el marco de este estudio. La elección del tema se justifica por la relevancia del mismo en un momento histórico en el que se está decidiendo el futuro del régimen climático a partir del año 2020. Aunque en el momento de redactar este documento, todavía no se ha acordado la forma que tendrán los futuros instrumentos de mitigación, sí que se sabe que los co-beneficios de estos instrumentos serán tan importantes, o incluso más, que las reducciones de GEI que generan. Esto se debe, principalmente, a las presiones realizadas en las negociaciones climáticas por parte de los países menos desarrollados, para los cuales el mayor incentivo de formar parte de dichas negociaciones se basa principalmente en estos potenciales co-beneficios. Los resultados de la tesis se estructuran alrededor de tres preguntas de investigación: ¿cómo están contribuyendo los MDL implementados en Brasil a generar co-beneficios que fomenten el desarrollo sostenible y reduzcan la pobreza?; ¿existen proyectos de mitigación en Brasil que por tener compromisos más exigentes en cuanto a su contribución al desarrollo sostenible y/o la reducción de la pobreza que los MDL estén siendo más eficientes que estos en relación a los co-beneficios que generan?; y ¿qué características de los proyectos de mitigación pueden resultar críticas para potenciar sus co-beneficios en las comunidades en las que se implementan? Para dar respuesta a estas preguntas, se ha desarrollado durante cuatro años una labor de investigación estructurada en varias fases y en la que se combinan diversas metodologías, que abarcan desde el desarrollo de un modelo de análisis de cobeneficios, hasta la aplicación del mismo tanto a nivel documental sobre 194 documentos de diseño de proyecto (denominado análisis ex-ante), como a través de 20 casos de estudio (denominado análisis ex-post). Con la realización de esta investigación, se ha confirmado que los requisitos existentes hasta el momento para registrar un proyecto como MDL bajo la CMNUCC no favorecen sustancialmente la generación de co-beneficios locales para las comunidades en las que se implementan. Adicionalmente, se han identificado prácticas y factores, que vinculadas a las actividades intrínsecas de los proyectos de mitigación, son efectivas para incrementar sus co-beneficios. Estas prácticas y factores podrán ser tenidas en cuenta tanto para mejorar los requisitos de los actuales proyectos MDL, como para apoyar la definición de los nuevos instrumentos climáticos. ABSTRACT Climate change and development are inextricably linked. On the one hand, the economic development of our societies has contributed to the unsustainable increase of Green House Gases emissions, which are destabilizing the global climate system while fostering an unequal distribution of people´s ability to cope with these changes. On the other hand, there is now a consensus that climate change directly impacts the so-called sustainable development. Likely, there is a growing agreement that climate change will substantially threaten our capacity to eradicate poverty in the medium and long term. Given this reality, there is no doubt that adaptation strategies are essentials to keep development. This is why, to date, much of the focus on poverty in the context of climate change has been on adaptation However, without diverting resources from adaptation, there may exist the potential to synergize efforts to mitigate emissions, contribute to sustainable development and reduce poverty. To fulfil this potential, it is key identifying how mitigation strategies can also support sustainable development and reduce poverty. In this context, the main purpose of this investigation is to explore the co-benefits, for sustainable development and for poverty reduction, of climate change mitigation projects being implemented in Brazil. In recent years the term co-benefits, has been used by policy makers and academics to refer the potentially large and diverse range of collateral benefits that can be associated with climate change mitigation policies in addition to the direct avoided climate impact benefits. The most relevant mitigation projects developed during the last years under the United Nations Framework Convention on Climate Change (UNFCCC) are the so-called Clean Development Mechanisms (CDM) of the Kyoto Protocol. Thus, this research will analyse this official mechanism. However, there are alternatives to the mitigation projects (such as the "add-on standards" of the Voluntary Carbon Markets, and the Social Technologies) that will also be assessed as part of the research. The selection of this research theme is justified because its relevance in a historic moment in which proposals for a future climate regime after 2020 are being negotiated. Although at the moment of writing this document, there is not a common understanding on the shape of the new mitigation instruments, there is a great agreement about the importance of the co-benefits of such instruments, which may be even more important for the Least Developed Countries that their expected greenhouse gases emissions reductions. The results of the thesis are structured around three research questions: how are the CDM projects being implemented in Brazil generating local co-benefits that foster sustainable development and poverty reduction?; are other mitigation projects in Brazil that due to their more stringent sustainable development and/o poverty reduction criteria, any more successful at delivering co-benefits than regular CDM projects?; and what are the distinguishing characteristics of mitigation projects that are successful at delivering co-benefits? To answer these research questions, during four years it has been developed a research work structured in several phases and combining various methodologies. Those methodologies cover from the development of a co-benefits assessment model, to the application of such model both to a desktop analysis of 194 project design documents, and to 20 case studies using field data based on site visits to the project sites. With the completion of this research, it has been confirmed that current requirements to register a CDM project under the UNFCCC not substantially favour co-benefits at the local level. In addition, some practices and factors enablers of co-benefits have been identified. These characteristics may be taken into consideration to improve the current CDM and to support the definition of the new international market mechanisms for climate mitigation.

Contribución a la caracterización espacial de canales con sistemas MIMO-OFDM en la banda de 2,45 Ghz

La tecnología de múltiples antenas ha evolucionado para dar soporte a los actuales y futuros sistemas de comunicaciones inalámbricas en su afán por proporcionar la calidad de señal y las altas tasas de transmisión que demandan los nuevos servicios de voz, datos y multimedia. Sin embargo, es fundamental comprender las características espaciales del canal radio, ya que son las características del propio canal lo que limita en gran medida las prestaciones de los sistemas de comunicación actuales. Por ello surge la necesidad de estudiar la estructura espacial del canal de propagación para poder diseñar, evaluar e implementar de forma más eficiente tecnologías multiantena en los actuales y futuros sistemas de comunicación inalámbrica. Las tecnologías multiantena denominadas antenas inteligentes y MIMO han generado un gran interés en el área de comunicaciones inalámbricas, por ejemplo los sistemas de telefonía celular o más recientemente en las redes WLAN (Wireless Local Area Network), principalmente por la mejora que proporcionan en la calidad de las señales y en la tasa de transmisión de datos, respectivamente. Las ventajas de estas tecnologías se fundamentan en el uso de la dimensión espacial para obtener ganancia por diversidad espacial, como ya sucediera con las tecnologías FDMA (Frequency Division Multiplexing Access), TDMA (Time Division Multiplexing Access) y CDMA (Code Division Multiplexing Access) para obtener diversidad en las dimensiones de frecuencia, tiempo y código, respectivamente. Esta Tesis se centra en estudiar las características espaciales del canal con sistemas de múltiples antenas mediante la estimación de los perfiles de ángulos de llegada (DoA, Direction-of- Arrival) considerando esquemas de diversidad en espacio, polarización y frecuencia. Como primer paso se realiza una revisión de los sistemas con antenas inteligentes y los sistemas MIMO, describiendo con detalle la base matemática que sustenta las prestaciones ofrecidas por estos sistemas. Posteriormente se aportan distintos estudios sobre la estimación de los perfiles de DoA de canales radio con sistemas multiantena evaluando distintos aspectos de antenas, algoritmos de estimación, esquemas de polarización, campo lejano y campo cercano de las fuentes. Así mismo, se presenta un prototipo de medida MIMO-OFDM-SPAA3D en la banda ISM (Industrial, Scientific and Medical) de 2,45 Ghz, el cual está preparado para caracterizar experimentalmente el rendimiento de los sistemas MIMO, y para caracterizar espacialmente canales de propagación, considerando los esquemas de diversidad espacial, por polarización y frecuencia. Los estudios aportados se describen a continuación. Los sistemas de antenas inteligentes dependen en gran medida de la posición de los usuarios. Estos sistemas están equipados con arrays de antenas, los cuales aportan la diversidad espacial necesaria para obtener una representación espacial fidedigna del canal radio a través de los perfiles de DoA (DoA, Direction-of-Arrival) y por tanto, la posición de las fuentes de señal. Sin embargo, los errores de fabricación de arrays así como ciertos parámetros de señal conlleva un efecto negativo en las prestaciones de estos sistemas. Por ello se plantea un modelo de señal parametrizado que permite estudiar la influencia que tienen estos factores sobre los errores de estimación de DoA, tanto en acimut como en elevación, utilizando los algoritmos de estimación de DOA más conocidos en la literatura. A partir de las curvas de error, se pueden obtener parámetros de diseño para sistemas de localización basados en arrays. En un segundo estudio se evalúan esquemas de diversidad por polarización con los sistemas multiantena para mejorar la estimación de los perfiles de DoA en canales que presentan pérdidas por despolarización. Para ello se desarrolla un modelo de señal en array con sensibilidad de polarización que toma en cuenta el campo electromagnético de ondas planas. Se realizan simulaciones MC del modelo para estudiar el efecto de la orientación de la polarización como el número de polarizaciones usadas en el transmisor como en el receptor sobre la precisión en la estimación de los perfiles de DoA observados en el receptor. Además, se presentan los perfiles DoA obtenidos en escenarios quasiestáticos de interior con un prototipo de medida MIMO 4x4 de banda estrecha en la banda de 2,45 GHz, los cuales muestran gran fidelidad con el escenario real. Para la obtención de los perfiles DoA se propone un método basado en arrays virtuales, validado con los datos de simulación y los datos experimentales. Con relación a la localización 3D de fuentes en campo cercano (zona de Fresnel), se presenta un tercer estudio para obtener con gran exactitud la estructura espacial del canal de propagación en entornos de interior controlados (en cámara anecóica) utilizando arrays virtuales. El estudio analiza la influencia del tamaño del array y el diagrama de radiación en la estimación de los parámetros de localización proponiendo, para ello, un modelo de señal basado en un vector de enfoque de onda esférico (SWSV). Al aumentar el número de antenas del array se consigue reducir el error RMS de estimación y mejorar sustancialmente la representación espacial del canal. La estimación de los parámetros de localización se lleva a cabo con un nuevo método de búsqueda multinivel adaptativo, propuesto con el fin de reducir drásticamente el tiempo de procesado que demandan otros algoritmos multivariable basados en subespacios, como el MUSIC, a costa de incrementar los requisitos de memoria. Las simulaciones del modelo arrojan resultados que son validados con resultados experimentales y comparados con el límite de Cramer Rao en términos del error cuadrático medio. La compensación del diagrama de radiación acerca sustancialmente la exactitud de estimación de la distancia al límite de Cramer Rao. Finalmente, es igual de importante la evaluación teórica como experimental de las prestaciones de los sistemas MIMO-OFDM. Por ello, se presenta el diseño e implementación de un prototipo de medida MIMO-OFDM-SPAA3D autocalibrado con sistema de posicionamiento de antena automático en la banda de 2,45 Ghz con capacidad para evaluar la capacidad de los sistemas MIMO. Además, tiene la capacidad de caracterizar espacialmente canales MIMO, incorporando para ello una etapa de autocalibración para medir la respuesta en frecuencia de los transmisores y receptores de RF, y así poder caracterizar la respuesta de fase del canal con mayor precisión. Este sistema incorpora un posicionador de antena automático 3D (SPAA3D) basado en un scanner con 3 brazos mecánicos sobre los que se desplaza un posicionador de antena de forma independiente, controlado desde un PC. Este posicionador permite obtener una gran cantidad de mediciones del canal en regiones locales, lo cual favorece la caracterización estadística de los parámetros del sistema MIMO. Con este prototipo se realizan varias campañas de medida para evaluar el canal MIMO en términos de capacidad comparando 2 esquemas de polarización y tomando en cuenta la diversidad en frecuencia aportada por la modulación OFDM en distintos escenarios. ABSTRACT Multiple-antennas technologies have been evolved to be the support of the actual and future wireless communication systems in its way to provide the high quality and high data rates required by new data, voice and data services. However, it is important to understand the behavior of the spatial characteristics of the radio channel, since the channel by itself limits the performance of the actual wireless communications systems. This drawback raises the need to understand the spatial structure of the propagation channel in order to design, assess, and develop more efficient multiantenna technologies for the actual and future wireless communications systems. Multiantenna technologies such as ‘Smart Antennas’ and MIMO systems have generated great interest in the field of wireless communications, i.e. cellular communications systems and more recently WLAN (Wireless Local Area Networks), mainly because the higher quality and the high data rate they are able to provide. Their technological benefits are based on the exploitation of the spatial diversity provided by the use of multiple antennas as happened in the past with some multiaccess technologies such as FDMA (Frequency Division Multiplexing Access), TDMA (Time Division Multiplexing Access), and CDMA (Code Division Multiplexing Access), which give diversity in the domains of frequency, time and code, respectively. This Thesis is mainly focus to study the spatial channel characteristics using schemes of multiple antennas considering several diversity schemes such as space, polarization, and frequency. The spatial characteristics will be study in terms of the direction-of-arrival profiles viewed at the receiver side of the radio link. The first step is to do a review of the smart antennas and MIMO systems technologies highlighting their advantages and drawbacks from a mathematical point of view. In the second step, a set of studies concerning the spatial characterization of the radio channel through the DoA profiles are addressed. The performance of several DoA estimation methods is assessed considering several aspects regarding antenna array structure, polarization diversity, and far-field and near-field conditions. Most of the results of these studies come from simulations of data models and measurements with real multiantena prototypes. In the same way, having understand the importance of validate the theoretical data models with experimental results, a 2,4 GHz MIMO-OFDM-SPAA2D prototype is presented. This prototype is intended for evaluating MIMO-OFDM capacity in indoor and outdoor scenarios, characterize the spatial structure of radio channels, assess several diversity schemes such as polarization, space, and frequency diversity, among others aspects. The studies reported are briefly described below. As is stated in Chapter two, the determination of user position is a fundamental task to be resolved for the smart antenna systems. As these systems are equipped with antenna arrays, they can provide the enough spatial diversity to accurately draw the spatial characterization of the radio channel through the DoA profiles, and therefore the source location. However, certain real implementation factors related to antenna errors, signals, and receivers will certainly reduce the performance of such direction finding systems. In that sense, a parameterized narrowband signal model is proposed to evaluate the influence of these factors in the location parameter estimation through extensive MC simulations. The results obtained from several DoA algorithms may be useful to extract some parameter design for directing finding systems based on arrays. The second study goes through the importance that polarization schemes can have for estimating far-field DoA profiles in radio channels, particularly for scenarios that may introduce polarization losses. For this purpose, a narrowband signal model with polarization sensibility is developed to conduct an analysis of several polarization schemes at transmitter (TX) and receiver (RX) through extensive MC simulations. In addition, spatial characterization of quasistatic indoor scenarios is also carried out using a 2.45 GHz MIMO prototype equipped with single and dual-polarized antennas. A good agreement between the measured DoA profiles with the propagation scenario is achieved. The theoretical and experimental evaluation of polarization schemes is performed using virtual arrays. In that case, a DoA estimation method is proposed based on adding an phase reference to properly track the DoA, which shows good results. In the third study, the special case of near-field source localization with virtual arrays is addressed. Most of DoA estimation algorithms are focused in far-field source localization where the radiated wavefronts are assume to be planar waves at the receive array. However, when source are located close to the array, the assumption of plane waves is no longer valid as the wavefronts exhibit a spherical behavior along the array. Thus, a faster and effective method of azimuth, elevation angles-of-arrival, and range estimation for near-field sources is proposed. The efficacy of the proposed method is evaluated with simulation and validated with measurements collected from a measurement campaign carried out in a controlled propagation environment, i.e. anechoic chamber. Moreover, the performance of the method is assessed in terms of the RMSE for several array sizes, several source positions, and taking into account the effect of radiation pattern. In general, better results are obtained with larger array and larger source distances. The effect of the antennas is included in the data model leading to more accurate results, particularly for range rather than for angle estimation. Moreover, a new multivariable searching method based on the MUSIC algorithm, called MUSA (multilevel MUSIC-based algorithm), is presented. This method is proposed to estimate the 3D location parameters in a faster way than other multivariable algorithms, such as MUSIC algorithm, at the cost of increasing the memory size. Finally, in the last chapter, a MIMO-OFDM-SPAA3D prototype is presented to experimentally evaluate different MIMO schemes regarding antennas, polarization, and frequency in different indoor and outdoor scenarios. The prototype has been developed on a Software-Defined Radio (SDR) platform. It allows taking measurements where future wireless systems will be developed. The novelty of this prototype is concerning the following 2 subsystems. The first one is the tridimensional (3D) antenna positioning system (SPAA3D) based on three linear scanners which is developed for making automatic testing possible reducing errors of the antenna array positioning. A set of software has been developed for research works such as MIMO channel characterization, MIMO capacity, OFDM synchronization, and so on. The second subsystem is the RF autocalibration module at the TX and RX. This subsystem allows to properly tracking the spatial structure of indoor and outdoor channels in terms of DoA profiles. Some results are draw regarding performance of MIMO-OFDM systems with different polarization schemes and different propagation environments.

Monitorización de la integración de sistemas intensivos software

El software se ha convertido en el eje central del mundo actual, una compleja creación humana que influye en la vida, negocios y comunicación de todas las personas pertenecientes a la Sociedad de la Información. El rápido crecimiento experimentado en el ámbito del desarrollo software ha permitido la creación de avanzadas estructuras tecnológicas, denominadas “Sistemas Intensivos Software”, capaces de comunicarse con otros sistemas, dispositivos, sensores y personas. A lo largo de los próximos años los sistemas se enfrentarán a una mayor complejidad, surgida de la necesidad de operar en entornos de grandes dimensiones y de comportamientos no deterministas. Los métodos y herramientas actuales no son lo suficientemente potentes para diseñar, construir,implementar y mantener sistemas intensivos software con estas características, y detener la construcción de sistemas intensivos software o construir sistemas poco flexibles o fiables no es una alternativa real. En el desarrollo de “Sistemas Intensivos Software” pueden llegar a intervenir distintas entidades o compañías software que suelen estar en ubicaciones geográficas distintas y constituidas por grandes equipos de desarrollo, multidisciplinares e incluso multilingües. Debido a la criticidad del resultado de las actividades realizadas de forma independiente en el sistema resultante, éstas se han de controlar y monitorizar para asegurar la correcta integración de todos los elementos del sistema completo. El objetivo de este proyecto es la creación de una herramienta software para dar soporte a la gestión y monitorización de la construcción e integración de sistemas intensivos software, siendo extensible también a proyectos de otra índole. La herramienta resultante se denomina Positioning System, una aplicación web del tipo SPA (Single Page Application) creada con tecnología de última generación como el framework JavaScript AngularJS y tecnología de back-end como SlimPHP. Positioning System provee la funcionalidad necesaria para la creación de proyectos, familias y subfamilias de productos que constituyen los productos software de los proyectos creados, así como la gestión de socios comerciales y gestión de contactos de dichos proyectos. Todas estas funcionalidades son fácilmente monitorizadas y controladas por gráficos estadísticos generados para cada proyecto. ABSTRACT Software has become the backbone of today’s world, a complex human creation that has an important impact in the life, business and communication of all people involved with the Information Society. The quick growth that software development has undergone for last years has enabled the creation of advanced technological structures called “Software Intensive Systems”. They are able to communicate with other systems, devices, sensors and people. Next years, systems will face more complexity. It arises from the need of operating systems of large dimensions with non-deterministic behaviors. Current methods and tools are not powerful enough to design, build, implement and maintain software intensive systems; however stopping the development or developing unreliable and non-flexible systems is not a real alternative. Software Intensive Systems” development may involve different entities or software companies which may be in different geographical locations and may be constituted by large, multidisciplinary and even multilingual development teams. Due to the criticality of the result of each conducted activity, independently in the resulting system, these activities must be controlled and monitored to ensure the proper integration of all the elements within the complete system. The goal of this project is the creation of a software tool to support the management and monitoring of the construction and integration of software intensive systems, being possible to be extended to other kind of projects. The resultant tool is called Positioning System, a web application that follows the SPA (Single Page Application) style. It was created with the latest technologies, such as, the AngularJS framework and SlimPHP. The Positioning System provides the necessary features for the creation of projects, families and subfamilies of products that constitute the software products of the created projects, as well as the management of business partners and contacts of these projects. All these features are easily monitored and controlled by statistical graphs generated for each project.