Identification and effectiveness of self-help groups in Cambodia

The CGIAR Research Program on Aquatic Agricultural Systems (AAS) seeks to reduce poverty and improve food security for the millions of small-scale fishers and farmers who depend on the world’s floodplains, deltas and coasts. AAS combines more conventional approaches for introducing and scaling technical innovations, such as applied research and training, with approaches that foster innovation and promote institutional and policy change. Specifically, AAS utilizes participatory action research with communities to identify technology and policy solutions that best meet community long-term needs. One of the themes identified under AAS is the role of self-help groups in increasing livelihood resilience of agriculture and fisheries communities. As AAS establishes a hub of operations in Cambodia, AAS and Oxfam America are cooperating to investigate the potential of community-based self-help groups as a strategy for AAS implementation. As part of this cooperation, Oxfam America undertook this consultancy to analyze and describe the role, efficiency and effectiveness of the various types of self-help groups in Cambodia. This report gives an overview of this program which aims to conduct a field-based study to identify the types, main characteristics and effectiveness of self-help groups, with a particular focus on livelihood resilience of agriculture and fisheries communities.

Lancifodilactone G: A unique nortriterpenoid isolated from Schisandra lancifolia and its anti-HIV activity

Lancifodilactone G (1), a novel, highly oxygenated nortriterpenoid featuring a partial enol structure and a spirocyclic moiety, was isolated from the medicinal plant Schisandra lancifolia. Its structure and stereochemistry were determined from extensive one- and two-dimensional NMR and mass spectral data, coupled with single-crystal X-ray analysis. Compound 1 exerted minimal cytotoxicity against C8166 cells (CC50 > 200 mu g/mL) and showed anti-HIV activity with EC50 = 95.47 +/- 14.19 mu g/mL and a selectivity index in the range of 1.82-2.46.

Lancifodilactone F: A novel nortriterpenoid possessing a unique skeleton from Schisandra lancifolia and its anti-HIV activity

Lancifodilactone F (1), possessing an unprecedented rearranged pentanortriterpenoid backbone derived from cycloartane, was isolated from the leaves and stems of Schisandra lancifolia (Rehd. et Wils) A. C. Smith. Its structure was established by comprehensive NMR and MS spectroscopic analysis, coupled with single-crystal X-ray experiment. Compound 1 exerted minimal cytotoxicity against C8166 cells (CC50 > 200 mu g/mL) and showed anti-HIV activity with EC50 = 20.69 +/- 3.31 mu g/mL and a selectivity index > 6.62.

Import substitution of combination wire rope. Part 2. Production and standardisation of 17 mm dia combination wire rope.

The prototype combination wire rope (Cift-CWR 1) developed for deep sea trawling was further studied for improvement, optimisation of efficiency and standardization. A series of improved prototype combination wire ropes (Cift-CWR 2 to 6) were twisted and evaluated their mechanical properties and reported in this paper with recommendations for a standard 17mm dia combination wire rope of 6S (7C+8+1 Scr) + 6 Crs(6+1+1 Crc) construction.

A comparative study on effects of Immunoster and Immunowall as immunostimulants on some hematological, biochemical and growth indices of farmed great sturgeon juveniles (Huso huso)

Prebiotics are non-digestible food ingredients that profitably affect the host by selectively stimulating the growth and /or activation of one or a limited number of bacteria in the intestine that can enhance host health status. Immunoster (IS) and Immunowall (IW) are prebiotics and immunostimulants derived from the outer cell wall of brewers yeast, Saccharomyces cerevisiae. These substances contain MOS and �-glucans. After a four-week acclimatization period to rearing conditions and basal diet, 450 farmed great sturgeon juveniles weighing 95.58 ± 9.38 g were randomly distributed into 15 fiberglass tanks (2 × 2 × 0.53 m) in five treatments (Control, IS 1%, IW 1%, IS 3%, and IW 3%) in three replicates (completely randomized design) and kept at a density of 30 fish per tank for a period of 8 weeks at water temperature 20.55 ± 5.11ºC, dissolved oxygen 6.73 ± 0.35 mg L-1 and pH 7.92 ± 0.09. IS and IW were added at two levels of 1% and 3% to the basal diet in place of cellulose, except the control. At the beginning, in the middle and at the end of the trial, carcass analysis was done to determine the moisture, protein, fat, ash, and total carbohydrate. Also, blood samples were collected to measure hematological, biochemical and immune indices. At the end of the trial, final weight, final length, body weight increase (BWI), specific growth rate (SGR), average daily growth (ADG), protein efficiency ratio (PER), feed conversion ratio (FCR), and condition factor (CF) in fish fed on IS and IW in both levels 1% and 3% showed some differences. These differences were significant in IS 3% and IW 1% and 3% compared with the control (P<0.05). HSI showed no significant difference (P>0.05) and survival rate was 100% in all treatments. Crude protein of carcass in fish fed on IS and IW at 1% and 3% showed an increase in comparison with the control. There was significant difference between IS 3% and the control in crude protein of carcass (P<0.05). Fish fed on IS and IW at 1% and 3% showed various results in hematological and biochemical factors. It was observed significant difference in MCV between IW 1% and IS 3% compared with the control (P<0.05). Although there was an increase in values of hematocrit, hemoglobin (except IS 1%), WBC (except IW 3%), MCH, neutrophil, total protein, albumin (except IS 3%), K+, and lysozyme in fish fed on IS and IW compared with the control, it was no significant (P>0.05). The maximum count of WBC and the highest value of Ca2+ were seen in IW 1%. The maximum count of lymphocyte, the highest values of total protein, albumin and IgM were recorded in IW 3%. IS 1% had the maximum count of neutrophil and the highest concentration of lysozyme. Based on obtained results, it can be declared that IS and IW at two levels of 1% and 3% can enhance growth performance and feed efficiency and also improve some hematological, biochemical, and immune indices in farmed great sturgeon juveniles.

Implications of local lifecycle analyses and low carbon fuel standard design on gasohol transportation fuels

State and regional policies, such as low carbon fuel standards (LCFSs), increasingly mandate that transportation fuels be examined according to their greenhouse gas (GHG) emissions. We investigate whether such policies benefit from determining fuel carbon intensities (FCIs) locally to account for variations in fuel production and to stimulate improvements in FCI. In this study, we examine the FCI of transportation fuels on a lifecycle basis within a specific state, Minnesota, and compare the results to FCIs using national averages. Using data compiled from 18 refineries over an 11-year period, we find that ethanol production is highly variable, resulting in a 42% difference between carbon intensities. Historical data suggests that lower FCIs are possible through incremental improvements in refining efficiency and the use of biomass for processing heat. Stochastic modeling of the corn ethanol FCI shows that gains in certainty due to knowledge of specific refinery inputs are overwhelmed by uncertainty in parameters external to the refiner, including impacts of fertilization and land use change. The LCA results are incorporated into multiple policy scenarios to demonstrate the effect of policy configurations on the use of alternative fuels. These results provide a contrast between volumetric mandates and LCFSs. © 2011 Elsevier Ltd.

Stability enhancement by casing grooves: The importance of stall inception mechanism and solidity

This paper concerns the optimisation of casing grooves and the important influence of stall inception mechanism on groove performance. Installing casing grooves is a well known technique for improving the stable operating range of a compressor, but the wide-spread use of grooves is restricted by the loss of efficiency and flow capacity. In this paper, laboratory tests are used to examine the conditions under which casing treatment can be used to greatest effect. The use of a single casing groove was investigated in a recently published companion paper. The current work extends this to multiple-groove treatments and considers their performance in relation to stall inception mechanisms. Here it is shown that the stall margin gain from multiple grooves is less than the sum of the gains if the grooves were used individually. By contrast, the loss of efficiency is additive as the number of grooves increases. It is then shown that casing grooves give the greatest stall margin improvement when used in a compressor which exhibits spike-type stall inception, while modal activity before stall can dramatically reduce the effectiveness of the grooves. This finding highlights the importance of being able to predict the stall inception mechanism which might occur in a given compressor before and after grooves are added. Some published prediction techniques are therefore examined, but found wanting. Lastly, it is shown that casing grooves can, in some cases, be used to remove rotor blades and produce a more efficient, stable and light-weight rotor. © 2010 by ASME.

Improved energy efficiency in paper making through reducing dryer steam consumption using advanced process control

Over the last two or three years, the increasing costs of energy and worsening market conditions have focussed even greater attention within paper mills than before, on considering ways to improve efficiency and reduce the energy used in paper making. Arising from a multivariable understanding of paper machine operation, Advanced Process Control (APC) technology enables paper machine behaviour to be controlled in a more coherent way, using all the variables available for control. Furthermore, with the machine under better regulation and with more variables used in control, there is the opportunity to optimise machine operation, usually providing very striking multi-objective performance improvement benefits of a number of kinds. Traditional three term control technology does not offer this capability. The paper presents results from several different paper machine projects we have undertaken around the world. These projects have been aimed at improving machine stability, optimising chemicals usage and reducing energy use. On a brown paperboard machine in Australasia, APC has reduced specific steam usage by 10%, averaged across the grades; the controller has also provided a significant capacity to increase production. On a North American newsprint machine, the APC system has reduced steam usage by more than 10%, and it provides better control of colour and much improved wet end stability. The paper also outlines early results from two other performance improvement projects, each incorporating a different approach to reducing the energy used in paper making. The first of these two projects is focussed on optimising sheet drainage, aiming to present the dryer with a sheet having higher solids content than before. The second project aims to reduce specific steam usage by optimising the operation of the dryer hood.

Intrinsic motivation and design of ICT for the ageing population

Chapter 11 Intrinsic Motivation and Design of ICT for ... Information and Communication Technology (ICT) systems provide an increasingly promising platform with which to improve the efficiency and effectiveness of healthcare, ...

Comparison of Image-Based and Time-of-Flight-Based Technologies for 3D Reconstruction of Infrastructure

Image-based (i.e., photo/videogrammetry) and time-of-flight-based (i.e., laser scanning) technologies are typically used to collect spatial data of infrastructure. In order to help architecture, engineering, and construction (AEC) industries make cost-effective decisions in selecting between these two technologies with respect to their settings, this paper makes an attempt to measure the accuracy, quality, time efficiency, and cost of applying image-based and time-of-flight-based technologies to conduct as-built 3D reconstruction of infrastructure. In this paper, a novel comparison method is proposed, and preliminary experiments are conducted. The results reveal that if the accuracy and quality level desired for a particular application is not high (i.e., error < 10 cm, and completeness rate > 80%), image-based technologies constitute a good alternative for time-of-flight-based technologies and significantly reduce the time and cost needed for collecting the data on site.

Comparison of Image-Based and Time-of-Flight-Based Technologies for Three-Dimensional Reconstruction of Infrastructure

Image-based (i.e., photo/videogrammetry) and time-of-flight-based (i.e., laser scanning) technologies are typically used to collect spatial data of infrastructure. In order to help architecture, engineering, and construction (AEC) industries make cost-effective decisions in selecting between these two technologies with respect to their settings, this paper makes an attempt to measure the accuracy, quality, time efficiency, and cost of applying image-based and time-of-flight-based technologies to conduct as-built 3D reconstruction of infrastructure. In this paper, a novel comparison method is proposed, and preliminary experiments are conducted. The results reveal that if the accuracy and quality level desired for a particular application is not high (i.e., error < 10 cm, and completeness rate > 80%), image-based technologies constitute a good alternative for time-of-flight-based technologies and significantly reduce the time and cost needed for collecting the data on site.

Dye-sensitized solar cells based on a single layer deposition of TiO 2 from a new formulation paste and their photovoltaic performance

A new strategy for enhancing the efficiency and reducing the production cost of TiO 2 solar cells by design of a new formulated TiO 2 paste with tailored crystal structure and morphology is reported. The conventional three- or four-fold layer deposition process was eliminated and replaced by a single layer deposition of TiO 2 compound. Different TiO 2 pastes with various crystal structures, morphologies and crystallite sizes were prepared by an aqueous particulate sol-gel process. Based on simultaneous differential thermal (SDT) analysis the minimum annealing temperature to obtain organic-free TiO 2 paste was determined at 400°C, being one of the lowest crystallization temperatures of TiO 2 photoanode electrodes for solar cell application. Photovoltaic measurements showed that TiO 2 solar cell with pure anatase crystal structure had higher power conversion efficiency (PCE) than that made of pure rutile-TiO 2. However, the PCE of solar cells depends on the anatase to rutile weight ratio, reaching a maximum at a specific value due to the synergic effect between anatase and rutile TiO 2 nanoparticles. Moreover, it was found that the PCE of solar cells made of crystalline TiO 2 powders was much higher, increasing in the range 32-84% depending on anatase to rutile weight ratio, than that of prepared by amorphous powders. TiO 2 solar cell with the morphology of mixtures of nanoparticles and microparticles had higher PCE than the solar cell with the same phase composition containing TiO 2 nanoparticles due to the role of TiO 2 microparticles as light scattering particles. The presented strategy would open up new insight into fabrication and structural design of low-cost TiO 2 solar cells with high power conversion efficiency. © 2012 Elsevier Ltd.

Toward designing with three-dimensional bumps for lift/drag improvement and buffet alleviation

The desire to design more efficient transport aircraft has led to many different attempts to minimize drag. One approach is the use of three-dimensional shock control bumps, which have gained popularity in the research community as simple, efficient and robust devices capable of reducing the wave drag of transonic wings. This paper presents a computational study of the performance of three-dimensional bumps, relating key bump design variables to the overall wing aerodynamic performance. An efficient parameterization scheme allows three-dimensional bumps to be directly compared to two-dimensional designs, indicating that two-dimensional bumps are capable of greater design point aerodynamic performance in the transonic regime. An advantage of three-dimensional bumps lies in the production of streamwise vortices, such that, while two-dimensional bumps are capable of superior performance near the design point, three-dimensional bumps are capable of breakingup regions of separated flow at high Mach numbers, suggesting improvement in terms of buffet margin. A range of bump designs are developed that exhibit a tradeoff between design point aerodynamic efficiency and improvementinbuffet margin, indicating the potential for bespoke designs to be generated for different sections of a wing based on its flow characteristics. Copyright © 2012 by Jeremy Eastwood and Jerome Jarrett.

Control of bimanual rhythmic movements: Trading efficiency for robustness depending on the context

This paper investigates how the efficiency and robustness of a skilled rhythmic task compete against each other in the control of a bimanual movement. Human subjects juggled a puck in 2D through impacts with two metallic arms, requiring rhythmic bimanual actuation. The arms kinematics were only constrained by the position, velocity and time of impacts while the rest of the trajectory did not influence the movement of the puck. In order to expose the task robustness, we manipulated the task context in two distinct manners: the task tempo was assigned at four different values (hence manipulating the time available to plan and execute each impact movement individually); and vision was withdrawn during half of the trials (hence reducing the sensory inflows). We show that when the tempo was fast, the actuation was rhythmic (no pause in the trajectory) while at slow tempo, the actuation was discrete (with pause intervals between individual movements). Moreover, the withdrawal of visual information encouraged the rhythmic behavior at the four tested tempi. The discrete versus rhythmic behavior give different answers to the efficiency/robustness trade-off: discrete movements result in energy efficient movements, while rhythmic movements impact the puck with negative acceleration, a property preserving robustness. Moreover, we report that in all conditions the impact velocity of the arms was negatively correlated with the energy of the puck. This correlation tended to stabilize the task and was influenced by vision, revealing again different control strategies. In conclusion, this task involves different modes of control that balance efficiency and robustness, depending on the context. © 2008 Springer-Verlag.

Changes in the Mg profile and in dislocations induced by high temperature annealing of blue LEDs

The efficiency of the injection and recombination processes in InGaN/GaN LEDs is governed by the properties of the active region of the devices, which strongly depend on the conditions used for the growth of the epitaxial material. To improve device quality, it is very important to understand how the high temperatures used during the growth process can modify the quality of the epitaxial material. With this paper we present a study of the modifications in the properties of InGaN/GaN LED structures induced by high temperature annealing: thermal stress tests were carried out at 900 °C, in nitrogen atmosphere, on selected samples. The efficiency and the recombination dynamics were evaluated by photoluminescence measurements (both integrated and time-resolved), while the properties of the epitaxial material were studied by Secondary Ion Mass Spectroscopy (SIMS) and Rutherford Backscattering (RBS) channeling measurements. Results indicate that exposure to high temperatures may lead to: (i) a significant increase in the photoluminescence efficiency of the devices; (ii) a decrease in the parasitic emission bands located between 380 nm and 400 nm; (iii) an increase in carrier lifetime, as detected by time-resolved photoluminescence measurements. The increase in device efficiency is tentatively ascribed to an improvement in the crystallographic quality of the samples. © 2013 SPIE.