Supporting life-long competence development using the TENCompetence infrastructure: a first experiment

This paper describes an experiment to explore the effects of the TENCompetence infrastructure for supporting lifelong competence development which is now in development. This infrastructure provides structured, multi-leveled access to learning materials, based upon competences. People can follow their own learning path, supported by a listing of competences and their components, by competence development plans attached to competences and by the possibility to mark elements as complete. We expected the PCM to have an effect on (1) control of participants of their own learning, and (2) appreciation of their learning route, (3) of the learning resources, (4) of their competence development, and (5) of the possibilities of collaboration. In the experiment, 44 Bulgarian teachers followed a distance learning course on a specific teaching methodology for six weeks. Part of them used the TENCompetence infrastructure, part used an infrastructure which was similar, except for the characterizing elements mentioned above. The results showed that in the experimental condition, more people passed the final competence assess-ment, and people felt more in control of their own learning. No differences between the two groups were found on the amount and appreciation of collaboration and on further measures of competence development.

Evaluation of a Bridge Constructed using High Performance Steel, May 2006

Of the approximately 25,000 bridges in Iowa, 28% are classified as structurally deficient, functionally obsolete, or both. Because many Iowa bridges require repair or replacement with a relatively limited funding base, there is a need to develop new bridge materials that may lead to longer life spans and reduced life-cycle costs. In addition, new and effective methods for determining the condition of structures are needed to identify when the useful life has expired or other maintenance is needed. Due to its unique alloy blend, high-performance steel (HPS) has been shown to have improved weldability, weathering capabilities, and fracture toughness than conventional structural steels. Since the development of HPS in the mid-1990s, numerous bridges using HPS girders have been constructed, and many have been economically built. The East 12th Street Bridge, which replaced a deteriorated box girder bridge, is Iowa’s first bridge constructed using HPS girders. The new structure is a two-span bridge that crosses I-235 in Des Moines, Iowa, providing one lane of traffic in each direction. A remote, continuous, fiber-optic based structural health monitoring (SHM) system for the bridge was developed using off-the-shelf technologies. In the system, sensors strategically located on the bridge collect raw strain data and then transfer the data via wireless communication to a gateway system at a nearby secure facility. The data are integrated and converted to text files before being uploaded automatically to a website that provides live strain data and a live video stream. A data storage/processing system at the Bridge Engineering Center in Ames, Iowa, permanently stores and processes the data files. Several processes are performed to check the overall system’s operation, eliminate temperature effects from the complete strain record, compute the global behavior of the bridge, and count strain cycles at the various sensor locations.

Le mariage à l'épreuve: les défis du partenariat de même sexe et de la procréation médicalement assistée en Suisse

Afin de rendre compte des luttes de?finitionnelles qui visent a? transformer ou a? pre?server le sens du mariage en tant qu?institution de l?he?te?rosexualite?, cet article examine deux de?bats cle?s qui ont re?cemment mis a? l?e?preuve l?institution du mariage en Suisse : l?institutionnalisation juridique des couples de me?me sexe avec l?adoption de la loi fe?de?rale sur le partenariat et la pre?servation du sche?ma familial he?te?rosexuel avec la loi fe?de?rale sur la procre?ation me?dicalement assiste?e. Ce texte de?fend que pour saisir l?e?volution du sens politique accorde? au mariage et a? la famille dans les de?bats sur le partenariat homosexuel, il convient d?e?tudier le processus d?institutionnalisation des couples homosexuels dans une temporalite? longue prenant place sur diffe?rentes sce?nes le?gislatives. This article examines how the heteronormative norm embedded in the institution of marriage has been put into question through the legal recognition of same sex couples and the access to assisted reproductive technologies in Switzerland. The paper shows that assessing the transformation of the meaning scheme attributed to the marriage and the family in the ongoing political debates on same-sex couples is enhanced by a diachronic analytical perspective focused on the different regulatory scenes, where the debate has taken place.

Possibles materials amb destinació a obres portuàries a la Costa Brava (Girona)

The metodology used in the research of materials destinated to port constructions in the Costa Brava is described. This metodology follows a set of work steps. The first three allow to do a selection of the stone quarries that exist in the zone. The other steps consists in studing the materials and the characteristics of the chosen quarries and the zones closed to them, as to order them according to their utility in port constmctions. Finally, the main results obtained are explained

A single-base substitution within an intronic repetitive element causes dominant retinitis pigmentosa with reduced penetrance.

We report the study of a large American family displaying autosomal dominant retinitis pigmentosa with reduced penetrance, a form of hereditary retinal degeneration. Although the inheritance pattern and previous linkage mapping pointed to the involvement of the PRPF31 gene, extensive screening of all its exons and their boundaries failed in the past to reveal any mutation. In this work, we sequenced the entire PRPF31 genomic region by both the classical Sanger method and ultrahigh throughput (UHT) sequencing. Among the many variants identified, a single-base substitution (c.1374+654C>G) located deep within intron 13 and inside a repetitive DNA element was common to all patients and obligate asymptomatic carriers. This change created a new splice donor site leading to the synthesis of two mutant PRPF31 isoforms, degraded by nonsense-mediated mRNA decay. As a consequence, amounts of PRPF31 mRNA derived from the mutant allele were very reduced, with no evidence of mutant proteins being synthesized. Our results indicate that c.1374+654C>G causes retinitis pigmentosa via haploinsufficiency, similar to the vast majority of PRPF31 mutations described so far. We discuss the potential of UHT sequencing technologies in mutation screening and the continued identification of pathogenic splicing mutations buried deep within intronic regions.

Sistemes logístics de codificació i identificació, i perspectives de futur

Comptar amb sistemes sofisticats de gestió o programes ERP (Enterprise Resource Planning) no és suficient per a les organitzacions. Per a què aquests recursos donin resultats adequats i actualitzats, la informació d’entrada ha de llegir-se de forma automàtica, per aconseguir estalviar en recursos, eliminació d’errors i assegurar el compliment de la qualitat. Per aquest motiu és important comptar amb eines i serveis d’identificació automàtica i col•lecció de dades. Els principals objectius a assolir (a partir de la introducció al lector de la importància dels sistemes logístics d’identificació en un entorn global d’alta competitivitat), són conèixer i comprendre el funcionament de les tres principals tecnologies existents al mercat (codis de barres lineals, codis de barres bidimensionals i sistemes RFID), veure en quin estat d’implantació es troba cadascuna i les seves principals aplicacions. Un cop realitzat aquest primer estudi es pretén comparar les tres tecnologies per o poder obtenir perspectives de futur en l’àmbit de l’autoidentificació. A partir de la situació actual i de les necessitats de les empreses, juntament amb el meravellós món que sembla obrir la tecnologia RFID (Radio Frequency Identification), la principal conclusió a la que s’arribarà és que malgrat les limitacions tècniques dels codis de barres lineals, aquests es troben completament integrats a tota la cadena logística gràcies a l’estandarització i la utilització d’un llenguatge comú, sota el nom de simbologies GTIN (Global Trade Item Number), durant tota la cadena de subministres que garanteixen total traçabilitat dels productes gràcies en part a la gestió de les bases de dades i del flux d’informació. La tecnologia RFUD amb l’EPC (Electronic Product Code) supera aquestes limitacions, convertint-se en el màxim candidat per a substituir els limitats codis de barres. Tot i això, RFID, amb l’EPC, no serà un adequat identificador logístic fins que es superin importants barreres, com són la falta d’estandarització i l’elevat cost d’implantació.

Creació d'una botiga virtual i automatització dels albarans, factures i cobraments

L’augment de la utilització de les noves tecnologies a la nostra societat permet a les empreses arribar al client d’una forma més rapida i facilitant la informació de manera àgil i ordenada. Amb aquest objectiu s’ha creat una botiga virtual que serà la part visible als usuaris i clients de l’empresa PRINTONER S.L , dedicada al sector dels consumibles, especialment els reciclats. Per l’empresa un dels objectius principals és oferir al client la possibilitat de comprar els seus productes de manera còmode a través d’Internet, ja que accedint amb un nom d’usuari i una contrasenya podrà obtenir totes les referències de les que es disposa, podrà tramitar les comandes i controlar-ne l’estat fins el moment de l’entrega. A part de les seccions destinades a usuaris i clients s’ha creat una zona d’administració, on els responsables de l’empresa podran gestionar tots els productes, modificar i visualitzar les comandes. A més aprofitant que aquestes quedaran guardades a una base de dades juntament amb els productes venuts, s’integrarà el sistema de facturació de l’empresa, cosa que fins el moment es feia de manera manual i maldestre. També es programarà una part on els responsables podran insertar reparacions i vendes informàtiques que s’hagin de facturar o per fer-ne un us estadístic en un futur. Tot això ens portarà a implementar un sistema d’usuaris registrats amb diferents permisos i diferents nivells d’accés a l’aplicació, fins a un total de 5. S’ha intentat fer de l’aplicació, un sistema a mida i que compleixi tots els requisits que l’empresa ens ha demanat, amb la previsió que més endavant s’hi pugui implementar un sistema de gestió d’estocs i altres millores per oferir als seus clients un servei inigualable. Per tal de portar a terme tot aquest treball s’ha utilitzat una tecnologia de lliure distribució com és el llenguatge PHP i la base de dades MySQL, aquesta opció a part d’una filosofia es produeix per intentar minimitzar els costos de l’aplicatiu. La finalitat de l’empresa amb aquest projecte és oferir millor imatge i servei, efectivitat i rapidesa en tot el procés de vendes, així com reduir costos de facturació i també de publicitat, ja que es podrà potenciar molt més la pàgina web via internet.

Ammonia volatilization from coated urea forms

Nitrogen fertilization is a major component of the cost of agricultural production, due to the high cost and low efficiency of fertilizers. In the case of urea, the low efficiency is mainly due to losses by volatilization, which are more pronounced in cultivation systems in which plant residues are left on the soil. The objective of this work was to compare the influence of urea coated with sulfur or boric acid and copper sulfate with conventional N fertilizers on N volatilization losses in sugar cane harvested after stubble burning. The sources urea, sulfur-coated urea, urea coated with boric acid and copper sulfate, as well as nitrate and ammonium sulfate, were tested at amounts containing N rates of 120 kg ha-1 N. The integration of new technologies in urea fertilization can reduce N losses by volatilization. These losses were most reduced when using nitrate and ammonium sulfate. The application of a readily acidified substance (boric acid) to urea was more efficient in reducing volatilization losses and nutrient removal by sugar cane than that of a substance with gradual acidification (elemental sulfur).

Cuando Frankenstein encontró a Dorian Gray: dandysmo, post-identidad y sujetos virtuales

The appearance and popularization of the internet has created new forms of writing, which compel us to think anew about identity and subjectivity. Webjournals or blogs are specially interesting because they are a massive phenomenon that use autobiographical writing in a peculiar way. These forms of writing stress a particular paradox of the genre: the coexistence between a purpose of private, confessional and spontaneous writing and a public image, carefully built, as a result of its writing. The technology is new, but, in fact, the paradox is old. This paper tries to explore this old paradox, our eternal condition of cyborgs, our use of technologies in order to construct a public, unique and recognizably identity. In oder to do so, I will try to show the virtual condition of any written individual ¿this issue has already been dealt with by autobiographical studies¿, focusing on blogs, and especially on concrete example (Lord Whimsy¿s Journal). I will pay attention to gender as a technology that constructs identity and, at the same time, is deconstructed by the autobiographical narratives analyzed. In short, I attempt to show that virtual and autobiographical discourse do not bring forth a new kind of subject but the permanence of an old phenomenon "clearly developed by dandyism, for instance¿: the use of tehnologies to re-invent, re-formulate and re-construct us as multiple, hybrid and mixed subjects."

Organismos filantrópicos y no gubernamentales en el desarrollo de nuevas ciencias y tecnologías: el caso de las micro y nanotecnologías en México

RESUMEN: La emergencia de nuevas ciencias y tecnologías vienen acompañadas de nuevas dinámicas en la producción, el uso y la diseminación de nuevos conocimientos científicos y tecnológicos. Estas nuevas dinámicas se reflejan en la reorganización de las actividades científicas, en la creación o la reorientación de nuevas temáticas en la investigación, en la emergencia de nuevas preocupaciones y debates sobre los riesgos e implicaciones sociales, y en la participación de nuevos actores en el desarrollo de la ciencia y la tecnología, entre otros factores. En este artículo se presentan los resultados del estudio sobre las funciones de un organismo con orígenes filantrópicos y no gubernamental que ha sido central en el desarrollo de los sistemas microelectromecánicos (MEMS) en México. Las funciones que se analizan han sido y son desarrolladas en las diferentes etapas del desarrollo de esta tecnología emergente en este país. Además de mostrar las funciones desempeñadas por este tipo de organismo, este texto se cuestiona sobre la modelización de las relaciones entre las diferentes entidades presentes en el desarrollo e instalación de nuevas tecnologías. En las conclusiones intentamos avanzar algunos elementos para tomar en cuenta estos organismos y enriquecer los estudios sociales sobre las nuevas ciencias y tecnologías. ABSTRACT: The emergence of new sciences and technologies come with new dynamics in the production, use and dissemination of new scientific and technological knowledge. These new dynamics are reflected in the reorganization of scientific activities, in creating or redirecting new topics in research, in the emergence of new concerns and debates about the risks and social implications, and the participation of new actors in the development of science and technology, among other factors. This article presents the results of the study on the functions of an organism with philanthropic and non-governmental sources that has been central to the development of microelectromechanical systems (MEMS) in Mexico. The functions have been discussed and are developed at different stages of development of this emerging technology in this country. In addition to showing the functions of such a body, this text is questioned on modeling the relationships between the various entities in the development and deployment of new technologies. In the conclusions we try moving some elements to take into account these organisms and enrich social studies on the new sciences and technologies.

Soft Photogrammetry for Highway Engineering, HR-387, 1998

The SoftPlotter, a soft photogrammetric software and Silicon Graphics workstation, was used to evaluate the accuracy of soft photogrammetry and identify applications of this technology to highway engineering. A comparative study showed that SoftPlotter compares well with other software such as Socket and Integraph. The PC software TNTMips is inexpensive but needs further development to be comparable to SoftPlotter. The Campus Project showed that soft photogrammetry is accurate for traditional photogrammetric applications. It is also accurate for producing orthophoto and base maps for Geographic Information Systems (GISs). The Highway Project showed that soft photogrammetry is accurate for highway engineering and that the technical staff at the Iowa Department of Transportation (IA DOT) can be easily trained in this new technology. The research demonstrated that soft photogrammetry can be used with low-flight helicopter photography for large-scale mapping in highway engineering. The researchers recommend that research be conducted to test the use of digital cameras instead of the traditional aerial cameras in helicopter photography. Research that examines the use of soft photogrammetry with video logging imagery for inventory and GIS studies in highway maintenance is also recommended. Research is also warranted into the integration of soft photogrammetry with virtual reality, which can be used in three-dimensional designing and visualization of highways and subdivisions in real time. The IA DOT owns one analytical plotter and two analogue plotters. The analytical plotter is used for aerial triangulation, and the analogue plotters are used for plotting. However, neither is capable of producing orthophotos. Therefore, the researchers recommend that the IA DOT purchase soft photogrammetric workstations for orthophoto production, and if and when required, use it for aerial triangulation and plotting. In the future, the analogue plotters may become obsolete. At that time, the researchers recommend that the analogue plotters be phased out and replaced by soft photogrammetric workstations.

A LC-tandem MS assay for the simultaneous measurement of new antiretroviral agents: Raltegravir, maraviroc, darunavir, and etravirine.

Raltegravir (RAL), maraviroc (MVC), darunavir (DRV), and etravirine (ETV) are new antiretroviral agents with significant potential for drug interactions. This work describes a sensitive and accurate liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for the determination of plasma drug levels. Single-step extraction of RAL, MVC, DRV, ETV and RTV from plasma (100 microl) is performed by protein precipitation using 600 microl of acetonitrile, after the addition of 100 microl darunavir-d(9) (DRV-d(9)) at 1000 ng/ml in MeOH/H(2)O 50/50 as internal standard (I.S.). The mixture is vortexed, sonicated for 10 min, vortex-mixed again and centrifuged. An aliquot of supernatant (150 microl) is diluted 1:1 with a mixture of 20 mM ammonium acetate/MeOH 40/60 and 10 microl is injected onto a 2.1 x 50 mm Waters Atlantis-dC18 3 microm analytical column. Chromatographic separations are performed using a gradient program with 2 mM ammonium acetate containing 0.1% formic acid and acetonitrile with 0.1% formic acid. Analytes quantification is performed by electrospray ionisation-triple quadrupole mass spectrometry using the selected reaction monitoring detection in the positive mode. The method has been validated over the clinically relevant concentrations ranging from 12.5 to 5000 ng/ml, 2.5 to 1000 ng/ml, 25 to 10,000 ng/ml, 10 to 4000 ng/ml, and 5 to 2000 ng/ml for RAL, MRV, DRV, ETV and RTV, respectively. The extraction recovery for all antiretroviral drugs is always above 91%. The method is precise, with mean inter-day CV% within 5.1-9.8%, and accurate (range of inter-day deviation from nominal values -3.3 to +5.1%). In addition our method enables the simultaneous assessment of raltegravir-glucuronide. This is the first analytical method allowing the simultaneous assay of antiretroviral agents targeted to four different steps of HIV replication. The proposed method is suitable for the Therapeutic Drug Monitoring Service of these new regimen combinations administered as salvage therapy to patients having experienced treatment failure, and for whom exposure, tolerance and adherence assessments are critical.

Cuando Frankenstein encontró a Dorian Gray: dandysmo, post-identidad y sujetos virtuales

The appearance and popularization of the internet has created new forms of writing, which compel us to think anew about identity and subjectivity. Webjournals or blogs are specially interesting because they are a massive phenomenon that use autobiographical writing in a peculiar way. These forms of writing stress a particular paradox of the genre: the coexistence between a purpose of private, confessional and spontaneous writing and a public image, carefully built, as a result of its writing. The technology is new, but, in fact, the paradox is old. This paper tries to explore this old paradox, our eternal condition of cyborgs, our use of technologies in order to construct a public, unique and recognizably identity. In oder to do so, I will try to show the virtual condition of any written individual ¿this issue has already been dealt with by autobiographical studies¿, focusing on blogs, and especially on concrete example (Lord Whimsy¿s Journal). I will pay attention to gender as a technology that constructs identity and, at the same time, is deconstructed by the autobiographical narratives analyzed. In short, I attempt to show that virtual and autobiographical discourse do not bring forth a new kind of subject but the permanence of an old phenomenon "clearly developed by dandyism, for instance¿: the use of tehnologies to re-invent, re-formulate and re-construct us as multiple, hybrid and mixed subjects."

Anàlisi d'una experiència basada en el mètode de la recerca del medi i amb el suport de les TIC

Avui en dia les Tecnologies de la Informació i la Comunicació (TIC) s’han convertit en eines d’ús quotidià i alhora invisibles en diversos àmbits de la societat i les escoles no n’estan al marge. No cal ensenyar a fer servir eines tecnològiques, sinó que cal entendre-les com un suport. Recerques recents han demostrat que un bon ús d’aquestes potencien un bon ensenyament i aprenentatge. Al mateix temps, es potencien mètodes globalitzats a les aules que permeten construir coneixements significatius a partir de situacions i problemes. Per això, l’objectiu principal d’aquest estudi consisteix en investigar quins canvis s’observen en la motivació de l’alumnat i quins canvis succeeixen a l’aula en general quan s’usen les TIC com a suport en un mètode globalitzat anomenat la recerca del medi. Per tal de resoldre aquest problema d’investigació es recullen diverses dades d’una intervenció didàctica basada en aquest mètode que es porta a terme en dos cursos de cinquè de Primària. Tal com s’observarà, l’ús de les noves tecnologies en un mètode que permet apropar els infants a la realitat n’augmenta la motivació i promou canvis a l’aula que ajuden i faciliten la tasca del docent i alhora afavoreix un aprenentatge significatiu.

CleanEx: a database of heterogeneous gene expression data based on a consistent gene nomenclature.

The main goal of CleanEx is to provide access to public gene expression data via unique gene names. A second objective is to represent heterogeneous expression data produced by different technologies in a way that facilitates joint analysis and cross-data set comparisons. A consistent and up-to-date gene nomenclature is achieved by associating each single experiment with a permanent target identifier consisting of a physical description of the targeted RNA population or the hybridization reagent used. These targets are then mapped at regular intervals to the growing and evolving catalogues of human genes and genes from model organisms. The completely automatic mapping procedure relies partly on external genome information resources such as UniGene and RefSeq. The central part of CleanEx is a weekly built gene index containing cross-references to all public expression data already incorporated into the system. In addition, the expression target database of CleanEx provides gene mapping and quality control information for various types of experimental resource, such as cDNA clones or Affymetrix probe sets. The web-based query interfaces offer access to individual entries via text string searches or quantitative expression criteria. CleanEx is accessible at: http://www.cleanex.isb-sib.ch/.