Is the Vietnamese garment industry at a turning point? : upgrading from the export to the domestic market

Vietnam’s garment industry has been loosely characterized by the duality based on market orientation: export and domestic. Export-oriented garment suppliers were typically SOEs and foreign invested firms, while those producing for the domestic market have been mostly small, private companies. With a booming economy, other industrial sectors have emerged, and the garment industry is no longer the sector most favored by workers. Wage rates have been increasing, and a supplier’s ability to cope with this through successful upgrading has been the key determinant of whether it can further grow and flourish. Those who fail to cope are finding themselves in an increasingly difficult position. This paper looks at both the export- and domestic-oriented garment suppliers, and attempts to highlight how the industry can further develop by examining the bottlenecks that vary depending on the type of supplier. It suggests that in the long run, upgrading and value addition in the domestic market will be the key strategy.

Response of local producers to agro-food port rejection : the case of Chinese vegetable exports

This paper analyzes the factors associated with the rejection of products at ports of importer countries and remedial actions taken by producers in China by taking as an example one of the most competitive agro-food products of China: frozen vegetables. This paper provides an overview of the vegetable production and distribution system in China and the way in which China has been participating in exports of these products. Later sections will examine in detail the frozen vegetable sector in China, identify the causes of port rejections, and the actions taken by the Chinese government and by producers, processors and exporters to improve the quality of frozen vegetable exports.

Slow and steady wins the race : how the garment industry leads industrialization in low-income countries

This paper investigates how the garment industry escapes this vicious cycle and argues for the validity of labor-intensive industry as a starting point for full-fledged industrialization, even though it might at first seem to be a digression from the path to an innovation-led economy. By examining original firm-level data on garment-producing firms collected in 2002 and 2008 in Bangladesh, Cambodia, Kenya and Madagascar, the following conclusions are drawn: (1) low wages, though still sufficient for poverty reduction, are the main source of competitiveness in low-income countries; (2) after the successful initiation of industrialization causes wages to begin to rise, there is still a possibility for productivity enhancement; and (3) skill bias in technological progress is not yet a major factor, implying that the garment industry is still a labor-intensive industry. In sum, labor-intensive industry should not be discounted as a part of the development strategy of low-income countries.

Service liberalization in Lao PDR

Service liberalization is emerging as a high-priority issue in various parts of the world for mega free trade agreements as well as national policy. Lao PDR is no exception. To examine the level of service liberalization in Lao PDR, we first compare the Hoekman Indices of Lao PDR, Cambodia, and Vietnam on the ASEAN Framework Agreement on Services (AFAS 8). Lao PDR has lower commitment in many subsectors. In particular, we list the sectors in which Lao PDR made a lower commitment than Cambodia and Vietnam in Mode 3 (supply of services through commercial establishments abroad). Second, a simulation analysis using the Geographical Simulation Model (IDE-GSM) from the Institute of Developing Economies at the Japan External Trade Organization (IDE-JETRO) reveals how service liberalization benefits the economic development of Lao PDR. The two analyses clearly reveal that it is essential for Lao PDR to promote further service liberalization since such liberalization will contribute to the country's development.

The environment dimension of food supply chain analysis

The paper reviews relevant literature studying the environmental impacts of food supply chain from production to each stage throughout the supply chain. With limited data and information, to better understand these impacts, a concrete example of the tea supply chain in China is provided. The tea supply chain is analyzed from the environmental prospective, with potential pollutants being identified at each stage of the supply chain. As an example of the food supply chain in a developing country, some unique features of the developing economies are taken into consideration when concluding the implications.

Food quality awareness : cases from shrimp producers in Thailand and vegetable producers in Vietnam

The high number of import rejections of food commodities suggests that producers in exporting countries are not complying with established standards. To understand why this is the case, we explore the behavior of producers and consumers in developing countries. First, we examine the successful transformation of production practices adopted by shrimp producers in Thailand. In support of the dramatic change in practices, we observe an important role played by the public sector in providing a means to visualize chemical residues and to control processes upstream of the supply chain via a registration system and a traceability system called Movement Document. Furthermore, very active information sharing by the private sector contributes to the dissemination of useful technical and market information among producers. We also examine the knowledge and perceptions of consumers with respect to food safety in Vietnam. We find that consumers in Hanoi and Ho Chi Minh City behave differently toward the third-party certification VietGAP, probably owing to differences in the history of market mechanisms between the two cities.

Desintegración vertical en la industria del automóvil en España: un caso de estudio = Vertical disintegration in the automotive industry in Spain: a case study

En los años recientes se ha producido un rápido crecimiento del comercio internacional en productos semielaborados que son diseñados, producidos y ensamblados en diferentes localizaciones a lo largo de diferentes países, debido principalmente a los siguientes motivos: el desarrollo de las tecnologías de la información, la reducción de los costes de transporte, la liberalización de los mercados de capitales, la armonización de factores institucionales, la integración económica regional que implica la reducción y la eliminación de las barreras al comercio, el desarrollo económico de los países emergentes, el uso de economías de escala, así como una desregulación del comercio internacional. Todo ello ha incrementado la competencia a nivel mundial en los mercados y ha posibilitado a las compañías tener más facilidad de acceso a potenciales mercados, así como a la adquisición de capacidades y conocimientos en otros países y a la realización de alianzas estratégicas internacionales con terceros, creando un entorno con mayor incertidumbre y más exigente para las compañías que componen una industria, y que tiene consecuencias directas en las operaciones de las compañías y en la organización de su producción. Las compañías, para adaptarse, ser competitivas y beneficiarse de este nuevo escenario globalizado y más competitivo, han externalizado partes del proceso productivo hacia proveedores especializados, creando un nuevo mercado intermedio que divide el proceso productivo, anteriormente integrado en las compañías que conforman una industria, entre dos conjuntos de empresas especializadas en esa industria. Dicho proceso suele ocurrir conservando la industria en que tiene lugar, los mismos servicios y productos, la tecnología empleada y las compañías originales que la conformaban previamente a la desintegración vertical. Todo ello es así debido a que es beneficioso tanto para las compañías originales de la industria como para las nuevas compañías de este mercado intermedio por diversos motivos. La desintegración vertical en una industria tiene unas consecuencias que la transforman completamente, así como la forma de operar de las compañías que la integran, incluso para aquellas que permanecen verticalmente integradas. Una de las características más importantes de esta desintegración vertical en una industria es la posibilidad que tiene una compañía de adquirir a una tercera la primera parte del proceso productivo o un bien semielaborado, que posteriormente será finalizado por la compañía adquiriente con la práctica del outsourcing; así mismo, una compañía puede realizar la primera parte del proceso productivo o un bien semielaborado, que posteriormente será finalizado por una tercera compañía con la práctica de la fragmentación. El principal objetivo de la presente investigación es el estudio de los motivos, los facilitadores, los efectos, las consecuencias y los principales factores significativos, microeconómicos y macroeconómicos, que desencadenan o incrementan la práctica de la desintegración vertical en una industria; para ello, la investigación se divide en dos líneas completamente diferenciadas: el estudio de la práctica del outsourcing y, por otro lado, el estudio de la fragmentación por parte de las compañías que componen la industria del automóvil en España, puesto que se trata de una de las industrias más desintegradas verticalmente y fragmentadas, y este sector posee una gran importancia en la economía del país. En primer lugar, se hace una revisión de la literatura existente relativa a los siguientes aspectos: desintegración vertical, outsourcing, fragmentación, teoría del comercio internacional, historia de la industria del automóvil en España y el uso de las aglomeraciones geográficas y las tecnologías de la información en el sector del automóvil. La metodología empleada en cada uno de ellos ha sido diferente en función de la disponibilidad de los datos y del enfoque de investigación: los factores microeconómicos, utilizando el outsourcing, y los factores macroeconómicos, empleando la fragmentación. En el estudio del outsourcing, se usa un índice basado en las compras externas sobre el valor total de la producción. Así mismo, se estudia su correlación y significación con las variables económicas más importantes que definen a una compañía del sector del automóvil, utilizando la técnica estadística de regresión lineal. Aquellas variables relacionadas con la competencia en el mercado, la externalización de las actividades de menor valor añadido y el incremento de la modularización de las actividades de la cadena de valor, han resultado significativas con la práctica del outsourcing. En el estudio de la fragmentación se seleccionan un conjunto de factores macroeconómicos, comúnmente usados en este tipo de investigaciones, relacionados con las principales magnitudes económicas de un país, y un conjunto de factores macroeconómicos, no comúnmente usados en este tipo de investigaciones, relacionados con la libertad económica y el comercio internacional de un país. Se emplea un modelo de regresión logística para identificar qué factores son significativos en la práctica de la fragmentación. De entre todos los factores usados en el modelo, los relacionados con las economías de escala y los costes de servicio han resultado significativos. Los resultados obtenidos de los test estadísticos realizados en el modelo de regresión logística han resultado satisfactorios; por ello, el modelo propuesto de regresión logística puede ser considerado sólido, fiable y versátil; además, acorde con la realidad. De los resultados obtenidos en el estudio del outsourcing y de la fragmentación, combinados conjuntamente con el estado del arte, se concluye que el principal factor que desencadena la desintegración vertical en la industria del automóvil es la competencia en el mercado de vehículos. Cuanto mayor es la demanda de vehículos, más se reducen los beneficios y la rentabilidad para sus fabricantes. Estos, para ser competitivos, diferencian sus productos de la competencia centrándose en las actividades que mayor valor añadido aportan al producto final, externalizando las actividades de menor valor añadido a proveedores especializados, e incrementando la modularidad de las actividades de la cadena de valor. Las compañías de la industria del automóvil se especializan en alguna o varias de estas actividades modularizadas que, combinadas con el uso de factores facilitadores como las economías de escala, las tecnologías de la información, las ventajas de la globalización económica y la aglomeración geográfica de una industria, incrementan y motivan la desintegración vertical en la industria del automóvil, desencadenando la coespecialización en dos sectores claramente diferenciados: el sector de fabricantes de vehículos y el sector de proveedores especializados. Cada uno de ellos se especializa en unas actividades y en unos productos o servicios específicos de la cadena de valor, lo cual genera las siguientes consecuencias en la industria del automóvil: se reducen los costes de transacción en los productos o servicios intercambiados; se incrementan la relación de dependencia entre fabricantes de vehículos y proveedores especializados, provocando un aumento en la cooperación y la coordinación, acelerando el proceso de aprendizaje, posibilitando a ambos adquirir nuevas capacidades, conocimientos y recursos, y creando nuevas ventajas competitivas para ambos; por último, las barreras de entrada a la industria del automóvil y el número de compañías se ven alteradas cambiando su estructura. Como futura línea de investigación, los fabricantes de vehículos tenderán a centrarse en investigar, diseñar y comercializar el producto o servicio, delegando el ensamblaje en manos de nuevos especialistas en la materia, el contract manufacturer; por ello, sería conveniente investigar qué factores motivantes o facilitadores existen y qué consecuencias tendría la implantación de los contract manufacturer en la industria del automóvil. 1.1. ABSTRACT In recent years there has been a rapid growth of international trade in semi-finished products designed, produced and assembled in different locations across different countries, mainly due to the following reasons: development of information technologies, reduction of transportation costs, liberalisation of capital markets, harmonisation of institutional factors, regional economic integration, which involves the reduction and elimination of trade barriers, economic development of emerging countries, use of economies of scale and deregulation of international trade. All these factors have increased competition in markets at a global level and have allowed companies to gain easier access to potential markets and to the acquisition of skills and knowledge in other countries, as well as to the completion of international strategic alliances with third parties, thus creating a more demanding and uncertain environment for these companies constituting an industry, which has a direct impact on the companies' operations and the organization of their production. In order to adapt, be competitive and benefit from this new and more competitive global scenario, companies have outsourced some parts of their production process to specialist suppliers, generating a new intermediate market which divides the production process, previously integrated in the companies that made up the industry, into two sets of companies specialized in that industry. This process often occurs while preserving the industry where it takes place, its same services and products, the technology used and the original companies that formed it prior to vertical disintegration. This is because it is beneficial for both the industry's original companies and the companies belonging to this new intermediate market, for various reasons. Vertical disintegration has consequences which completely transform the industry where it takes place as well as the modus operandi of the companies that are part of it, even of those who remain vertically integrated. One of the most important features of vertical disintegration of an industry is the possibility for a company to acquire from a third one the first part of the production process or a semi-finished product, which will then be finished by the acquiring company through the practice of outsourcing; also, a company can perform the first part of the production process or a semi-finish product, which will then be completed by a third company through the practice of fragmentation. The main objective of this research is to study the motives, facilitators, effects, consequences and major significant microeconomic and macroeconomic factors that trigger or increase the practice of vertical disintegration in a certain industry; in order to do so, research is divided into two completely differentiated lines: on the one hand, the study of the practise of outsourcing and, on the other, the study of fragmentation by companies constituting the automotive industry in Spain, since this is one of the most vertically disintegrated and fragmented industries and this particular sector is of major significance in this country's economy. First, a review is made of the existing literature, on the following aspects: vertical disintegration, outsourcing, fragmentation, international trade theory, history of the automobile industry in Spain and the use of geographical agglomeration and information technologies in the automotive sector. The methodology used for each of these aspects has been different depending on the availability of data and the research approach: the microeconomic factors, using outsourcing, and the macroeconomic factors, using fragmentation. In the study on outsourcing, an index is used based on external purchases in relation to the total value of production. Likewise, their significance and correlation with the major economic variables that define an automotive company are studied, using the statistical technique of linear regression. Variables related to market competition, outsourcing of lowest value-added activities and increased modularisation of the activities of the value chain have turned out to be significant with the practice of outsourcing. In the study of fragmentation, a set of macroeconomic factors commonly used for this type of research, is selected, related to the main economic indicators of a country, as well as a set of macroeconomic factors, not commonly used for this type of research, which are related to economic freedom and the international trade of a certain country. A logistic regression model is used to identify which factors are significant in the practice of fragmentation. Amongst all factors used in the model, those related to economies of scale and service costs have turned out to be significant. The results obtained from the statistical tests performed on the logistic regression model have been successful; hence, the suggested logistic regression model can be considered to be solid, reliable and versatile; likewise, it is in line with reality. From the results obtained in the study of outsourcing and fragmentation, combined with the state of the art, it is concluded that the main factor that triggers vertical disintegration in the automotive industry is competition within the vehicle market. The greater the vehicle demand, the lower the earnings and profitability for manufacturers. These, in order to be competitive, differentiate their products from the competition by focusing on those activities that contribute with the highest added value to the final product, outsourcing the lower valueadded activities to specialist suppliers, and increasing the modularity of the activities of the value chain. Companies in the automotive industry specialize in one or more of these modularised activities which, combined with the use of enabling factors such as economies of scale, information technologies, the advantages of economic globalisation and the geographical agglomeration of an industry, increase and encourage vertical disintegration in the automotive industry, triggering co-specialization in two clearly distinct sectors: the sector of vehicle manufacturers and the specialist suppliers sector. Each of them specializes in certain activities and specific products or services of the value chain, generating the following consequences in the automotive industry: reduction of transaction costs of the goods or services exchanged; growth of the relationship of dependency between vehicle manufacturers and specialist suppliers, which causes an increase in cooperation and coordination, accelerates the learning process, enables both to acquire new skills, knowledge and resources, and creates new competitive advantages for both; finally, barriers to entry the automotive industry and the number of companies are altered, changing their structure. As a future line of research, vehicle manufacturers will tend to focus on researching, designing and marketing the product or service, delegating the assembly in the hands of new specialists in the field, the contract manufacturer; for this reason, it would be useful to investigate what motivating or facilitating factors exist in this respect and what consequences would the implementation of contract manufacturers have in the automotive industry.

The trade credit in the Spanish agrofood industry

Selling on credit is rather frequent in Mediterranean countries. Its generalized use can lead to excessive enlargements of the payment periods and consequently can deteriorate the profitability of firms. In spite of the relevance of this problem there are few empirical researches. This work intends to fill this gap and to shed light on the factors related to the extension of trade credit. In the theoretical and empirical literature, different motives have been proposed to explain this issue: a mechanism to reduce transaction costs, a financial alternative to the bank system and an additional tool to improve commercial activities. To contrast these ideas a panel of 388 firms of the Spanish agrofood industry has been taken, and static and dynamic regression models have been estimated by using robust methods to heteroskedasticity, autocorrelation and endogeneity of the explanatory variables. The results confirm that trade credit receivable is associated with more active firms and with cheaper bank financing. Other factors with positive relationships are short-term bank debts and accounts payable. These findings are consistent with commercial motives, rather than a pure financial view, in the sense that financial distressed producers extend trade credit as a way of promoting their products and in turn increasing their sales.

Direct and indirect economic impacts of drought in the agri-food sector in the Ebro River basin (Spain).

The economic evaluation of drought impacts is essential in order to define efficient and sustainable management and mitigation strategies. The aim of this study is to evaluate the economic impacts of a drought event on the agricultural sector and measure how they are transmitted from primary production to industrial output and related employment. We fit econometric models to determine the magnitude of the economic loss attributable to water storage. The direct impacts of drought on agricultural productivity are measured through a direct attribution model. Indirect impacts on agricultural employment and the agri-food industry are evaluated through a nested indirect attribution model. The transmission of water scarcity effects from agricultural production to macroeconomic variables is measured through chained elasticities. The models allow for differentiating the impacts deriving from water scarcity from other sources of economic losses. Results show that the importance of drought impacts are less relevant at the macroeconomic level, but are more significant for those activities directly dependent on water abstractions and precipitation. From a management perspective, implications of these findings are important to develop effective mitigation strategies to reduce drought risk exposure.

Application of NMR techniques for the evaluation of fruit internal quality and physical properties of food

Los alimentos son sistemas complejos, formados por diversas estructuras a diferentes escalas: macroscópica y microscópica. Muchas propiedades de los alimentos, que son importantes para su procesamiento, calidad y tratamiento postcosecha, están relacionados con su microestructura. La presente tesis doctoral propone una metodología completa para la determinación de la estructura de alimentos desde un punto de vista multi-escala, basándose en métodos de Resonancia Magnética Nuclear (NMR). Las técnicas de NMR son no invasivas y no destructivas y permiten el estudio tanto de macro- como de microestructura. Se han utilizado distintos procedimientos de NMR dependiendo del nivel que se desea estudiar. Para el nivel macroestructural, la Imagen de Resonancia Magnética (MRI) ha resultado ser muy útil para la caracterización de alimentos. Para el estudio microestructural, la MRI requiere altos tiempos de adquisición, lo que hace muy difícil la transferencia de esta técnica a aplicaciones en industria. Por tanto, la optimización de procedimientos de NMR basados en secuencias relaxometría 2D T1/T2 ha resultado ser una estrategia primordial en esta tesis. Estos protocolos de NMR se han implementado satisfactoriamente por primera vez en alto campo magnético. Se ha caracterizado la microestructura de productos alimentarios enteros por primera vez utilizando este tipo de protocolos. Como muestras, se han utilizado dos tipos de productos: modelos de alimentos y alimentos reales (manzanas). Además, como primer paso para su posterior implementación en la industria agroalimentaria, se ha mejorado una línea transportadora, especialmente diseñada para trabajar bajo condiciones de NMR en trabajos anteriores del grupo LPF-TAGRALIA. Se han estudiado y seleccionado las secuencias más rápidas y óptimas para la detección de dos tipos de desórdenes internos en manzanas: vitrescencia y roturas internas. La corrección de las imágenes en movimiento se realiza en tiempo real. Asimismo, se han utilizado protocolos de visión artificial para la clasificación automática de manzanas potencialmente afectadas por vitrescencia. El presente documento está dividido en diferentes capítulos: el Capítulo 2 explica los antecedentes de la presente tesis y el marco del proyecto en el que se ha desarrollado. El Capítulo 3 recoge el estado del arte. El Capítulo 4 establece los objetivos de esta tesis doctoral. Los resultados se dividen en cinco sub-secciones (dentro del Capítulo 5) que corresponden con los trabajos publicados bien en revistas revisadas por pares, bien en congresos internacionales o bien como capítulos de libros revisados por pares. La Sección 5.1. es un estudio del desarrollo de la vitrescencia en manzanas mediante MRI y lo relaciona con la posición de la fruta dentro de la copa del árbol. La Sección 5.2 presenta un trabajo sobre macro- y microestructura en modelos de alimentos. La Sección 5.3 es un artículo en revisión en una revista revisada por pares, en el que se hace un estudio microestrcutural no destructivo mediante relaxometría 2D T1/T2. la Sección 5.4, hace una comparación entre manzanas afectadas por vitrescencia mediante dos técnicas: tomografía de rayos X e MRI, en manzana. Por último, en la Sección 5.5 se muestra un trabajo en el que se hace un estudio de secuencias de MRI en línea para la evaluación de calidad interna en manzanas. Los siguientes capítulos ofrecen una discusión y conclusiones (Capítulo 6 y 7 respectivamente) de todos los capítulos de esta tesis doctoral. Finalmente, se han añadido tres apéndices: el primero con una introducción de los principios básicos de resonancia magnética nuclear (NMR) y en los otros dos, se presentan sendos estudios sobre el efecto de las fibras en la rehidratación de cereales de desayuno extrusionados, mediante diversas técnicas. Ambos trabajos se presentaron en un congreso internacional. Los resultados más relevantes de la presente tesis doctoral, se pueden dividir en tres grandes bloques: resultados sobre macroestructura, resultados sobre microestructura y resultados sobre MRI en línea. Resultados sobre macroestructura: - La imagen de resonancia magnética (MRI) se aplicó satisfactoriamente para la caracterización de macroestructura. En particular, la reconstrucción 3D de imágenes de resonancia magnética permitió identificar y caracterizar dos tipos distintos de vitrescencia en manzanas: central y radial, que se caracterizan por el porcentaje de daño y la conectividad (número de Euler). - La MRI proveía un mejor contraste para manzanas afectadas por vitrescencia que las imágenes de tomografía de rayos X (X-Ray CT), como se pudo verificar en muestras idénticas de manzana. Además, el tiempo de adquisición de la tomografía de rayos X fue alrededor de 12 veces mayor (25 minutos) que la adquisición de las imágenes de resonancia magnética (2 minutos 2 segundos). Resultados sobre microestructura: - Para el estudio de microestructura (nivel subcelular) se utilizaron con éxito secuencias de relaxometría 2D T1/T2. Estas secuencias se usaron por primera vez en alto campo y sobre piezas de alimento completo, convirtiéndose en una forma no destructiva de llevar a cabo estudios de microestructura. - El uso de MRI junto con relaxometría 2D T1/T2 permite realizar estudios multiescala en alimentos de forma no destructiva. Resultados sobre MRI en línea: - El uso de imagen de resonancia magnética en línea fue factible para la identificación de dos tipos de desórdenes internos en manzanas: vitrescencia y podredumbre interna. Las secuencias de imagen tipo FLASH resultaron adecuadas para la identificación en línea de vitrescencia en manzanas. Se realizó sin selección de corte, debido a que la vitrescencia puede desarrollarse en cualquier punto del volumen de la manzana. Se consiguió reducir el tiempo de adquisición, de modo que se llegaron a adquirir 1.3 frutos por segundos (758 ms por fruto). Las secuencias de imagen tipo UFLARE fueron adecuadas para la detección en línea de la podredumbre interna en manzanas. En este caso, se utilizó selección de corte, ya que se trata de un desorden que se suele localizar en la parte central del volumen de la manzana. Se consiguió reducir el tiempo de adquisicón hasta 0.67 frutos por segundo (1475 ms por fruto). En ambos casos (FLASH y UFLARE) fueron necesarios algoritmos para la corrección del movimiento de las imágenes en tiempo real. ABSTRACT Food is a complex system formed by several structures at different scales: macroscopic and microscopic. Many properties of foods that are relevant to process engineering or quality and postharvest treatments are related to their microstructure. This Ph.D Thesis proposes a complete methodology for food structure determination, in a multiscale way, based on the Nuclear Magnetic Resonance (NMR) phenomenon since NMR techniques are non-invasive and non-destructive, and allow both, macro- and micro-structure study. Different NMR procedures are used depending on the structure level under study. For the macrostructure level, Magnetic Resonance Imaging (MRI) revealed its usefulness for food characterization. For microstructure insight, MRI required high acquisition times, which is a hindrance for transference to industry applications. Therefore, optimization of NMR procedures based on T1/T2 relaxometry sequences was a key strategy in this Thesis. These NMR relaxometry protocols, are successfully implemented in high magnetic field. Microstructure of entire food products have been characterized for the first time using these protocols. Two different types of food products have been studied: food models and actual food (apples). Furthermore, as a first step for the food industry implementation, a grading line system, specially designed for working under NMR conditions in previous works of the LPF-TAGRALIA group, is improved. The study and selection of the most suitable rapid sequence to detect two different types of disorders in apples (watercore and internal breakdown) is performed and the real time image motion correction is applied. In addition, artificial vision protocols for the automatic classification of apples potentially affected by watercore are applied. This document is divided into seven different chapters: Chapter 2 explains the thesis background and the framework of the project in which it has been worked. Chapter 3 comprises the state of the art. Chapter 4 establishes de objectives of this Ph.D thesis. The results are divided into five different sections (in Chapter 5) that correspond to published peered reviewed works. Section 5.1 assesses the watercore development in apples with MRI and studies the effect of fruit location in the canopy. Section 5.2 is an MRI and 2D relaxometry study for macro- and microstructure assessment in food models. Section 5.3 is a non-destructive microstructural study using 2D T1/T2 relaxometry on watercore affected apples. Section 5.4 makes a comparison of X-ray CT and MRI on watercore disorder of different apple cultivars. Section 5.5, that is a study of online MRI sequences for the evaluation of apple internal quality. The subsequent chapters offer a general discussion and conclusions (Chapter 6 and Chapter 7 respectively) of all the works performed in the frame of this Ph.D thesis (two peer reviewed journals, one book chapter and one international congress).Finally, three appendices are included in which an introduction to NMR principles is offered and two published proceedings regarding the effect of fiber on the rehydration of extruded breakfast cereal are displayed. The most relevant results can be summarized into three sections: results on macrostructure, results on microstructure and results on on-line MRI. Results on macrostructure: - MRI was successfully used for macrostructure characterization. Indeed, 3D reconstruction of MRI in apples allows to identify two different types of watercore (radial and block), which are characterized by the percentage of damage and the connectivity (Euler number). - MRI provides better contrast for watercore than X-Ray CT as verified on identical samples. Furthermore, X-Ray CT images acquisition time was around 12 times higher (25 minutes) than MRI acquisition time (2 minutes 2 seconds). Results on microstructure: - 2D T1/T2 relaxometry were successfully applied for microstructure (subcellular level) characterization. 2D T1/T2 relaxometry sequences have been applied for the first time on high field for entire food pieces, being a non-destructive way to achieve microstructure study. - The use of MRI together with 2D T1/T2 relaxometry sequences allows a non-destructive multiscale study of food. Results on on-line MRI: - The use of on-line MRI was successful for the identification of two different internal disorders in apples: watercore and internal breakdown. FLASH imaging was a suitable technique for the on-line detection of watercore disorder in apples, with no slice selection, since watercore is a physiological disorder that may be developed anywhere in the apple volume. 1.3 fruits were imaged per second (768 ms per fruit). UFLARE imaging is a suitable sequence for the on-line detection of internal breakdown disorder in apples. Slice selection was used, as internal breakdown is usually located in the central slice of the apple volume. 0.67 fruits were imaged per second (1475 ms per fruit). In both cases (FLASH and UFLARE) motion correction was performed in real time, during the acquisition of the images.

Evaluation of the competitiveness of agri-food sector in the región of the Alcarria Conquense(Spain)

The agrifood industry, like other sectors, faces the ongoing challenge of improving their competitiveness in order to strengthen its market presence and cater to the growing global population. This research measures the competitiveness of the agrifood industry in the region of La Alcarria Conquense (Spain), in the framework of the evaluation of programs in the territory that have aimed at improving and enhancing this sector. Through building the competitiveness profiles (Porter, 1990) and cluster analysis we have identified six competitive strategy patterns in food companies in the region. In addition, we have analyzed each of the areas of competitiveness and we can identify the strengths and weaknesses of the sector, and identify recommendations for increasing the responsiveness of the territory. Among the defining characteristics are the lack of association, the limitation on payment systems or virtual absence of training and innovation. However, programs to support the sector are highly valued and reverse in the long-term viability of these companies.

Implantación de un sistema de depósito, devolución y retorno en el mercado retail español

“Quien contamina, paga“, con esta premisa surgió la idea de este Trabajo Fin de Máster, en adelante TFM, cuyo objetivo era identificar medidas alternativas reales para una optimización del proceso actual de gestión de residuos sólidos urbanos ante una sociedad cada vez más superpoblada y con mayores ratios de consumo. Cada español genera anualmente un volumen de 485 Kg de residuos, de los cuales únicamente el 33 % son reciclados y pueden volver a un flujo normal de uso, especialmente preocupante durante los últimos años es el auge de los productos envasados, tanto de bebidas como de alimentos , cuya utilización se ha duplicado en la última década. La motivación de este trabajo Fin de Máster ha sido la de poner de manifiesto que la sostenibilidad con el medioambiente puede ir de la mano de la rentabilidad y del progreso. Durante este TFM se ha estudiado y analizado la viabilidad económica de implantación de un nuevo modelo de depósito, devolución y retorno en el mercado retail español y como con la adopción de este nuevo sistema se pueden lograr beneficios tanto para el propio minorista, como para el medio ambiente con ratios de reciclado superiores al 98%. La preocupación por el medio ambiente empieza a ser una constante entre los consumidores españoles y dicha preocupación comienza a ser influenciadora en las decisiones de compra (productos eco, sostenibilidad…). Nuestra propuesta consiste en dotar a los principales distribuidores del sector retail español de un sistema de depósito, devolución y retorno para envases de bebidas capaz de generar diferenciación, innovación y rentabilidad frente a la competencia. Dicho sistema consiste en pagar un depósito por cada envase de bebida que se adquiera y su correspondiente devolución en la siguiente compra, una vez que se devuelva vacío al establecimiento. Para ello se ha analizado el sector de la distribución en España, especialmente la distribución de bebidas. Se trata de un sector muy competitivo, que presenta varios formatos en función del tamaño del establecimiento (Hipermercados, Supermercados, tiendas tradicionales). Las principales empresas distribuidoras (Carrefour, Mercadona, Alcampo, Eroski, DIA) se encuentran en procesos de cambios estratégicos para lograr atraer a más consumidores hacia sus tiendas, por lo que nuestra propuesta podrá añadir valor a la hora de influenciar en la decisión del lugar de compra. En nuestro caso, nos dirigiremos principalmente a las grandes empresas distribuidoras, Hipermercados de más de 2.500 m2 ,que cuentan con más de 500 puntos de venta y distribución donde existe la posibilidad real de implantar un SDDR. Además se ha realizado un estudio de mercado sobre la influencia de dicho sistema en el consumidor final, donde se ha detectado dos segmentos principales cuya decisión de compra se vería muy influenciada por la implantación de un SDDR, un segmento Sénior, entre 45-54 años, preocupados por el medio ambiente y con poder adquisitivo suficiente como para que el pago del depósito no sea bloqueante, y un segmento Junior, entre 18-24 años, también muy concienciado el medio ambiente, de capacidad económica menor pero qué influye en la decisión de compra de sus progenitores. Para llevar a cabo este plan de negocio será necesario una inversión inicial de 57.000 €, con unas expectativas de recuperación de dicha inversión en el primer año y una TIR del 56%, presentando un VAN de 127.961 € para los 7 años de vida del proyecto. Para dar a conocer a los clientes del Hipermercado los beneficios de utilizar un sistema SDDR, se realizarán campañas de marketing a través de diferentes canales, promociones de apertura, acciones de marketing exteriores y planes de fidelización. La organización e implantación en el Hipermercado será muy sencilla con roles claramente diferenciados, únicamente involucraría a unos 9 recursos definidos y en aproximadamente 3 meses desde el inicio del proyecto ya se podría ofertar dicho servicio a los clientes del Hipermercado. Además se han analizado los principales riesgos a los que se enfrentaría el negocio, ponderándose en una matriz impacto-probabilidad. Se han establecido medidas correctoras en el caso que dicho riesgo aflore. Habrá que tener especialmente precaución con la pérdida de ventas durante el arranque del negocio en el caso que esto ocurra, por lo que se deberá controlar el gasto, fomentar la captación de clientes y mantener un fondo de maniobra lo suficientemente elevado como para absorber dicho riesgo.---ABSTRACT---“Polluters pay”, with this premise this TFM aimed at identifying real alternative measures for optimization of the current process of solid waste management in a crowded society and with greater consumption ratios. Spaniards generates an annual volume of 485 kg of waste; only 33 % are recycled and can return to a normal flow. Specially concern is the increased of packaged product in recent years, mainly drink and food, their use has been duplicated in the last decade. The motivation for this Thesis was to highlight that sustainability, profitability and progress can go together. During this TFM has been studied and analyzed the economic feasibility of implementing a new model of deposit , refund and return in the Spanish retail market and as with the adoption of this new system can achieve benefits for the retailer itself therefore to the environment with ratios above 98% recycled. Concern for the environment is becoming a constant among Spanish consumers , and this concern is becoming influencer in purchasing decisions ( eco, sustainability ... ) . Our proposal is to provide the main distributors of the Spanish retail sector a system of deposit, refund and return for beverage containers capable of generating differentiation, innovation and profitability over the competition. This system is to pay a deposit for each beverage container they purchase and their corresponding return in the next purchase, once they return empty to the establishment. For this we have analyzed the distribution sector in Spain, especially the distribution of beverages. This is a highly competitive industry, which features various formats depending on the size of establishments (hypermarkets, supermarkets, traditional shops). The main distribution companies (Carrefour, Mercadona, Alcampo, Eroski, DIA) are in the process of strategic changes in order to attract more consumers to their stores, so that our approach can add value in influencing the decision of place shopping. In our case, we will go mainly to large distributors, Hypermarkets of over 2,500 m2, which have more than 500 outlets and distribution where there is a real possibility of implementing a SDDR. It has also conducted a market study on the influence of that system on the final consumer, which has detected two main segments whose purchasing decisions would be greatly influenced by the introduction of a SDDR, a Senior segment, 45-54 years concerned about the environment and purchasing power enough that the deposit is not blocking, and a Junior Segment, aged 18-24, also concern with environment, lower economic capacity but what influences the decision purchase of their parents). To carry out this business plan will require an initial investment of 57,000 €, with expectations of recovery of such investment in the first year and an IRR of 56%, with an NPV of € 127,961 for the 7 years of the project . To publicize hypermarket customers the benefits of using a SDDR system, marketing campaigns conducted through different channels, opening promotions, marketing activities and external loyalty schemes. The organization and implementation in the Hypermarket is easy with distinct roles, involve only about 9 resourced and in about 3 months from the start of the project and could offer this service to customers in the hypermarket. We have also analyzed the main risks and established corrective measures to surface that risk . We should take caution with lost sales during startup of the business, such as control spending, customer retention and maintaining enough working capital.

Nitrogen management and the future of food: Lessons from the management of energy and carbon

The food system dominates anthropogenic disruption of the nitrogen cycle by generating excess fixed nitrogen. Excess fixed nitrogen, in various guises, augments the greenhouse effect, diminishes stratospheric ozone, promotes smog, contaminates drinking water, acidifies rain, eutrophies bays and estuaries, and stresses ecosystems. Yet, to date, regulatory efforts to limit these disruptions largely ignore the food system. There are many parallels between food and energy. Food is to nitrogen as energy is to carbon. Nitrogen fertilizer is analogous to fossil fuel. Organic agriculture and agricultural biotechnology play roles analogous to renewable energy and nuclear power in political discourse. Nutrition research resembles energy end-use analysis. Meat is the electricity of food. As the agriculture and food system evolves to contain its impacts on the nitrogen cycle, several lessons can be extracted from energy and carbon: (i) set the goal of ecosystem stabilization; (ii) search the entire production and consumption system (grain, livestock, food distribution, and diet) for opportunities to improve efficiency; (iii) implement cap-and-trade systems for fixed nitrogen; (iv) expand research at the intersection of agriculture and ecology, and (v) focus on the food choices of the prosperous. There are important nitrogen-carbon links. The global increase in fixed nitrogen may be fertilizing the Earth, transferring significant amounts of carbon from the atmosphere to the biosphere, and mitigating global warming. A modern biofuels industry someday may produce biofuels from crop residues or dedicated energy crops, reducing the rate of fossil fuel use, while losses of nitrogen and other nutrients are minimized.

Genetically Modified Food in the US and the UK: proponents, dissenters and media coverage

This research is a qualitative study examining the communication surrounding the issue of genetically modified food in the UK and the UK from October, 2011 through September, 2012. Material from biotechnology industry organizations, industry-funded non-profits, groups campaigning against the continued use of the technology, and mainstream media coverage of the issue in both countries during this time was examined using thematic analysis. The issue is analyzed through the lenses of Herman and Chomsky's propaganda model, agenda building and framing theory. The research finds support for agenda building as well as a modernized understanding of the propaganda model, which the researcher argues are complementary theories.

Applying Translation Quality Standards to a Certification Procedure for U.S. Language Service Providers

Many translation quality standards have been implemented to regulate the provision and procurement of language services. However, in the absence of a standardized procedure to certify U.S. language service providers (LSPs), the industry lacks consensus with regard to requirements, procedures, and expectations. This project establishes the need for such a procedure and proposes an LSP Certification Procedure based on existing quality standards. Through a review and analysis of existing translation quality standards, an interview with a key stakeholder, and the presentation of an LSP Certification Procedure, this project concludes that the U.S. language services industry requires a procedure to certify LSPs and that such a procedure may be designed and implemented based on existing standards.