Opaque Layer Firing Temperature and Aging Effect on the Flexural Strength of Ceramic Fused to Cobalt-Chromium Alloy

Purpose: To evaluate the effect of the opaque layer firing temperature and mechanical and thermal cycling on the flexural strength of a ceramic fused to commercial cobalt-chromium alloy (Co-Cr). The hypotheses were that higher opaque layer temperatures increase the metal/ceramic bond strength and that aging reduces the bond strength. Materials and Methods: Metallic frameworks (25 x 3 x 0.5 mm(3); ISO 9693) (N = 60) were cast in Co-Cr and airborne-particle abraded (Al(2)O(3): 150 mu m) at the central area of the frameworks (8 x 3 mm(2)) and divided into three groups (N = 20), according to the opaque layer firing temperature: Gr1 (control)-900 degrees C; Gr2-950 degrees C; Gr3-1000 degrees C. The opaque ceramic (Opaque, Vita Zahnfabrick, Bad Sackingen, Germany) was applied, and the glass ceramic (Vita Omega 900, Vita Zahnfabrick) was fired onto it (thickness: 1 mm). While half the specimens from each group were randomly tested without aging (water storage: 37 degrees C/24 hours), the other half were mechanically loaded (20,000 cycles; 50 N load; distilled water at 37 degrees C) and thermocycled (3000 cycles; 5 degrees C to 55 degrees C, dwell time: 30 seconds). After the flexural strength test, failure types were noted. The data were analyzed using 2-way ANOVA and Tukey`s test (alpha = 0.05). Results: Gr2 (19.41 +/- 5.5 N) and Gr3 (20.6 +/- 5 N) presented higher values than Gr1 (13.3 +/- 1.6 N) (p = 0.001). Mechanical and thermal cycling did not significantly influence the mean flexural strength values (p > 0.05). Increasing the opaque layer firing temperature improved the flexural bond strength values (p < 0.05). The hypotheses were partially accepted. Conclusion: Increasing of the opaque layer firing temperature improved the flexural bond strength between ceramic fused to Co-Cr alloy.

Malformations of Cortical Development in Patients With Mid line Facial Defects and Ocular Hypertelorism

Objectives: We studied the neuroimaging and neurophysiological aspects of 17 patients with midline facial defects with ocular hypertelorism (MFDH). Methods: The investigation protocol included a previous semistructured questionnaire about family history; gestational, neonatal, and postnatal development; and dysmorphologic and neurologic evaluation. Recognized monogenic disorders and individuals with other well-known conditions were excluded. All patients had high resolution magnetic resonance imaging (MRI) with multiplanar reconstruction (MPR) and routine electroencephalograms (EEGs). Results: We detected abnormalities in five patients whose MRIs had been previously reported as normal. MRI showed central nervous system (CNS) structural abnormalities in all patients, which included commissural alterations in 16/17 (94%), malformations of cortical development in 10/17 (58%), disturbances of neural tube closure in 7/17(42%), and posterior fossa anomalies in 6/17 (35%). Some patients had more than one type of malformation occurring at different stages of the embryonary process. EEGs showed epileptiform activity in 4/17 (24%) and background abnormalities in 5/17 (29%) of patients. Conclusion: This study clearly demonstrated the presence of structural and functional neurologic alterations related to MFDH. Therefore, the CNS anomalies cannot be considered incidental findings but an intrinsic part of this condition, which could be related to environmental effects and/or genetic mutations. These findings would provide a basis for future investigations on MFDH and should also be considered when planning rehabilitation.

Dental Evaluation of Kabuki Syndrome Patients

Kabuki syndrome is a genetic disorder of unknown etiology characterized by mental retardation, growth deficiency, and peculiar face (i.e., long palpebral fissures, eversion of the lateral third of the lower eyelids, prominent ears, and broad and depressed nasal tip). Oral manifestations commonly observed in Kabuki syndrome may comprise cleft lip/palate, bifid tongue and uvula, malocclusion, and dental abnormalities. We evaluated the dental findings of eight patients with Kabuki syndrome. One presented cleft palate; three presented caries; and seven had missing teeth, with the upper lateral incisors and inferior central incisors being the most commonly absent. All missing teeth were permanent, and there was no alteration of dental chronology or morphology. Because most patients had mixed dentition, the presence or absence of primary teeth was assessed through the parents` reports. One patient presented an absent upper canine, which had not been reported previously in the literature. Dental findings may be helpful for clinical diagnosis, or they may be an additional finding to substantiate the diagnosis of Kabuki syndrome in children with mild phenotype.

Toll-like receptor activity in Recurrent Aphthous Ulceration

Toll-like receptors (TLR) are membrane proteins that recognize conserved molecules derived from bacterial, virus, fungal or host tissues. Activation of TLRs causes the production of cytokines that mediate inflammatory responses and drive T helper (Th) 1 and 2 cell development. As an exaggerated Th1 immune response is supposed to be involved in pathogenesis of Recurrent Aphthous Ulceration (RAU), we suggest that RAU patients may have an imbalance in TLR pathways. To study the function of TLR activation ex vivo, peripheral blood mononuclear cells (PBMCs) from RAU patients (n = 17) and controls (n = 17) were exposed to TLR2 [lipoteichoic acid (LTA), heat-killed Listeria monocytogenes (HKLM) and PamC3CSK4], TLR3 [Poly(I:C)], TLR4 [lipopolysaccharide (LPS)], TLR5 (flagellin) and TLR7 (imiquimod) ligands, and the time course of supernatant tumor necrosis factor-alpha (TNF-alpha) levels was quantified by enzyme-linked immunosorbent assay. In addition, serological and salivary TNF-alpha and soluble CD14 levels were quantified. The TNF-alpha produced by PBMCs in contact with each TLR ligand and autologous serum or saliva at the same time was also investigated. The data were analyzed by statistical multivariate tests. The control group had a higher response to LTA, whereas RAU had a higher response to HKLM. LTA and LPS interfered with the salivary stimulation of the RAU PBMC and HKLM with the stimulation of the control. Autologous serum was capable of inhibiting TLR2 responsiveness to LTA and enhancing LPS stimulation. Salivary and serological levels of sCD14 and TNF-alpha were not significantly different. Recurrent Aphthous Ulceration patients have an anomalous activity of the TLR2 pathway that probably influences the stimulation of an abnormal Th1 immune response.

Gingival juvenile xanthogranuloma in an adult patient: case report with immunohistochemical analysis and literature review

Juvenile xanthogranuloma (JXG) is a non-Langerhans cell histiocytosis (nonLCH). It is a benign and self-healing disorder that generally affects infants and children. Oral lesions in adult patients are rare, although the microscopic findings are similar to those observed in other locations. A 56-year-old white man presented with a chief complaint of a gingival mass that had appeared 6 months before and had grown slowly. An intraoral examination revealed the presence of a solitary, softened gingival mass affecting the mandibular lingual gingiva at the right central incisor area. A biopsy of the lesion showed multiple large macrophages and numerous giant cells of Touton type. The immunohistochemistry positivity for CD68, fascin, factor XIIIa, alpha-antitrypsin and negativity for S-100, beta-actin, CD1a, and desmin confirmed the diagnosis of JXG. The occurrence of adult oral JXG is extremely rare. It is a nonLCH that may present variable clinical and microscopic aspects, which leads to a diversity of clinical misdiagnoses. A precise diagnosis of these lesions requires an accurate evaluation of clinical, microscopic, and immunohistochemical features.

Use of Allogeneic Bone Graft in Maxillary Reconstruction for Installation of Dental implants

The aim of this study is to evaluate the efficacy of the application of allogenous bone at the maxillo-mandibular reconstructions for future rehabilitation with dental implants. The patients were submitted to reconstruction of maxilla, using allogeneic bone grafts, in 3 different techniques: onlay grafts for lateral ridge augmentation, onlay and particulate bone for sinus lift grafting, and particulate alone for sinus lift grafts. Clinical and radiographic control was done at the postoperative phase for at least 8 months, until the patient could be submitted to the installation of dental implants. The results showed success in the majority of the cases, and dental implants could be installed. This can be considered an excellent alternative when compared with the use of autogenous grafts; because handling is easier, there is a great amount of material available and a possibility of using local anesthesia, and consequently there is a reduction of patient morbidity. (C) 2008 American Association of Oral and Maxillofacial Surgeons

Influence of thermal and mechanical cycling on the flexural strength of ceramics with titanium or gold alloy frameworks

Objectives. The aim of this study was to evaluate the effect of thermal and mechanical cycling alone or in combination, on the flexural strength of ceramic and metallic frameworks cast in gold alloy or titanium. Methods. Metallic frameworks (25 mm x 3 mm x 0.5 mm) (N = 96) cast in gold alloy or commercial pure titanium (Ti cp) were obtained using acrylic templates. They were airborne particle-abraded with 150 mu m aluminum oxide at the central area of the frameworks (8 mm x 3 mm). Bonding agent and opaque were applied on the particle-abraded surfaces and the corresponding ceramic for each metal was fired onto them. The thickness of the ceramic layer was standardized by positioning the frameworks in a metallic template (height: I mm). The specimens from each ceramic-metal combination (N = 96, n = 12 per group) were randomly assigned into four experimental fatigue conditions, namely water storage at 37 degrees C for 24 h (control group), thermal cycling (3000 cycles, between 4 and 55 degrees C, dwell time: 10 s), mechanical cycling (20,000 cycles under 10 N load, immersion in distilled water at 37 degrees C) and, thermal and mechanical cycling. A flexural strength test was performed in a universal testing machine (crosshead speed: 1.5 mm/min). Data were statistically analyzed using two-way ANOVA and Tukey`s test (alpha = 0.05). Results. The mean flexural strength values for the ceramic-gold alloy combination (55 +/- 7.2MPa) were significantly higher than those of the ceramic-Ti cp combination (32 +/- 6.7 MPa) regardless of the fatigue conditions performed (p < 0.05). Mechanical and thermo-mechanical fatigue decreased the flexural strength results significantly for both ceramic-gold alloy (52 +/- 6.6 and 53 +/- 5.6 MPa, respectively) and ceramic-Ti cp combinations (29 +/- 6.8 and 29 +/- 6.8 MPa, respectively) compared to the control group (58 +/- 7.8 and 39 SA MPa, for gold and Ti cp, respectively) (p < 0.05) (Tukey`s test). While ceramic-Ti cp combinations failed adhesively at the metal-opaque interface, gold alloy frameworks exhibited a residue of ceramic material on the surface in all experimental groups. Significance. Mechanical and thermo-mechanical fatigue conditions decreased the flexural strength values for both ceramic-gold alloy and ceramic-Ti cp combinations with the results being significantly lower for the latter in all experimental conditions. (C) 2007 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Mandibular appliance modulates condylar growth through integrins

Functional orthopedic therapy corrects growth discrepancies between the maxilla and mandible, possibly through postural changes in the musculature and modulation of the mandibular condylar cartilage growth. Using Wistar rats, we tested the hypothesis that chondrocytes respond to forces generated by a mandibular propulsor appliance by changes in gene expression, and that integrins are important mediators in this response. Immunohistochemical analyses demonstrated that the use of the appliance for different periods of time modulated the expression of fibronectin, alpha 5 and alpha v integrin subunits, as well as cell proliferation in the cartilage. In vitro, cyclic distension of condylar cartilage-derived cells increased fibronectin mRNA, as well as Insulinlike Growth Factor-I and II mRNA and cell proliferation. A peptide containing the Arginine-Glycine-Asparagine sequence (RGD), the main cell-binding sequence in fibronectin, blocked almost all these effects, confirming that force itself modulates the growth of the rat condylar cartilage, and that RGD-binding integrins participate in mechanotransduction.

Mesenchymal Stem Cell Properties of Periodontal Ligament Cells From Deciduous and Permanent Teeth

Background: Human postnatal stem cells have been identified in periodontal ligaments (PDLs). In this study, the in vitro biologic properties of CD105(+) enriched cell subsets from PDLs harvested from deciduous (DePDL) and permanent (PePDL) teeth are comparatively assessed. Methods: PDL tissue was obtained from 12 teeth (six primary and six permanent) from which CD105(+) CD34(-) CD45(-) cells were isolated by magnetic cell sorting. To identify and quantitatively compare the stem cell markers, DePDL and PePDL cells were assessed for CD166 surface antigen expression by flow cytometry, real-time polymerase chain reaction, and immunostaining for Stro-1 and Oct-4, osteogenic and adipogenic differentiation, and proliferation rate by trypan blue method. Results: Magnetic cell sorting isolated cell populations containing 23.87% (+/- 11.98%) and 11.68% (+/- 6.27%) of CD105(+) expressing cells from PePDL and DePDL, respectively. Flow cytometric analysis demonstrated a higher proportion of CD105(+) cells coexpressing CD166 surface antigen in PePDL, whereas immunostaining and real-time polymerase chain reaction analysis demonstrated that both cell subsets expressed Stro-1 and Oct-4. DePDL-CD105(+) subsets were more proliferative compared to PePDL subsets, and both cell populations showed multipotential capabilities to differentiate in vitro to osteoblast/cementoblast- and adipocyte-like cells. However, a higher expression of adipogenic-related genes was observed in DePDL cells, whereas PePDL-CD105(+) cell subset presented a more homogeneous osteoblast/cementoblast response. Conclusion: These findings demonstrate that highly purified mesenchymal progenitor cell subsets can be obtained from the PDLs of both deciduous and permanent teeth, and further indicate phenotype dissimilarities that may have an impact on their clinical applications. J Periodontol 2010;81:1207-1215.

The Ideal Timing for Experimental Cleft Lip Creation

Cleft lip and palate (CLP) is the most common congenital defect of the face. Many animal models have been utilized to study embryogenesis and pathogenesis of CLP, including the development of secondary anomalies and consequent deformities. However, the ideal gestational age for surgical creation of lip or palate defects in rat models has never been determined. The aim of the present study is to improve the experimental model utilizing rat fetuses, defining the most appropriate timing for creation of the lip defect model. The study was composed of three groups of fetuses undergoing surgical creation of a lip defect at the left side of the superior lip at 17.5, 18.5, and 19.5 days of gestation. Fetuses were harvested at 21.5 days of gestation (term = 22 days) and underwent macroscopic and microscopic analyses. We found that the most appropriate moment for lip defect creation was at 19.5 days, given the presence of lip depression at the site of the defect and asymmetry and retraction associated with interruption of the lip and complete reepithelialization of the borders of the defect.

The effects of systemic stress on orthodontic tooth movement

Objectives: To determine if systemic stress affects the biological reactions occurring during orthodontic tooth movement. Methods: Four groups of male 10 week-old Wistar rats were used. Group A animals (N=10) were restrained for one hour per day for 40 days; Group B animals (N=10) were restrained for one hour per day for three days; Group C (N=10) and Group D (N=8) animals were unrestrained. The upper left first molars in the rats in Groups A (long-term stress), B (short-term stress) and C (control) were moved mesially during the last 14 days of the experiment. The animals in Group D (N=8) were used for body weight and hormonal dosage comparisons only. They were not subjected to any stress and did not have appliances fitted. All animals were killed at 18 weeks of age and blood collected for measurement of plasma corticosterone. Tooth movement was measured with an electronic caliper. The right and left hemi-maxillae of five rats from each group were removed and the number of tartrate-resistant acid phosphatase (TRAP) positive cells, defined as osteoclasts, adjacent to the mesial roots of the upper first molars counted. The contralateral side in each animal served as the control (split-mouth design). Results: Corticosterone levels were significantly higher in the stressed groups (Groups A and B) than in the control group (Group C). Tooth movement was significantly greater in Group A (long-term stress) compared with Group B (short-term stress) and Group C (control), which did not differ from each other. There were significantly more osteoclasts in the long-term stress group than in the short-term stress and control groups. Conclusion: Persistent systemic stress increases bone resorption during orthodontic tooth movement. Systemic stress may affect the rate of tooth movement during orthodontic treatment.

Leprosy-specific oral lesions: A report of three cases

Leprosy is a chronic infection caused by Mycobacterium leprae, a bacillus that presents a peculiar tropism for the skin and peripheral nerves. The clinical spectrum of leprosy ranges from the tuberculoid form (TT) to the disseminative and progressive lepromatous form (LL). Oral lesions are rare but, when present, occur in the lepromatous form. This article describes the clinical and microscopic findings of three cases of LL with oral manifestations. All patients had the lepromatous form and their leprosy-specific oral lesions occurred in the palate. The diagnosis was based on clinical, serological and histopathological findings, and multidrug therapy for multibacillary leprosy was started and continued for 24 months. All patients completed treatment, but developed reaction episodes which were treated with prednisone and/or thalidomide. The authors emphasize the importance of oral mucosa evaluation by a dental health professional during patient care since oral lesions may act as a source of infection.