Log-Burr XII regression models with censored data

In survival analysis applications, the failure rate function may frequently present a unimodal shape. In such case, the log-normal or log-logistic distributions are used. In this paper, we shall be concerned only with parametric forms, so a location-scale regression model based on the Burr XII distribution is proposed for modeling data with a unimodal failure rate function as an alternative to the log-logistic regression model. Assuming censored data, we consider a classic analysis, a Bayesian analysis and a jackknife estimator for the parameters of the proposed model. For different parameter settings, sample sizes and censoring percentages, various simulation studies are performed and compared to the performance of the log-logistic and log-Burr XII regression models. Besides, we use sensitivity analysis to detect influential or outlying observations, and residual analysis is used to check the assumptions in the model. Finally, we analyze a real data set under log-Buff XII regression models. (C) 2008 Published by Elsevier B.V.

Gamma transition intensity determination using multidetector coincidence data

This work describes two similar methods for calculating gamma transition intensities from multidetector coincidence measurements. In the first one, applicable to experiments where the angular correlation function is explicitly fitted, the normalization parameter from this fit is used to determine the gamma transition intensities. In the second, that can be used both in angular correlation or DCO measurements, the spectra obtained for all the detector pairs are summed up, in order to get the best detection statistics possible, and the analysis of the resulting bidimensional spectrum is used to calculate the transition intensities; in this method, the summation of data corresponding to different angles minimizes the influence of the angular correlation coefficient. Both methods are then tested in the calculation of intensities for well-known transitions from a (152)Eu standard source, as well as in the calculation of intensities obtained in beta-decay experiments with (193)Os and (155)Sm sources, yielding excellent results in all these cases. (C) 2009 Elsevier B.V. All rights reserved.

Comparing diagnostic tests with missing data

When missing data occur in studies designed to compare the accuracy of diagnostic tests, a common, though naive, practice is to base the comparison of sensitivity, specificity, as well as of positive and negative predictive values on some subset of the data that fits into methods implemented in standard statistical packages. Such methods are usually valid only under the strong missing completely at random (MCAR) assumption and may generate biased and less precise estimates. We review some models that use the dependence structure of the completely observed cases to incorporate the information of the partially categorized observations into the analysis and show how they may be fitted via a two-stage hybrid process involving maximum likelihood in the first stage and weighted least squares in the second. We indicate how computational subroutines written in R may be used to fit the proposed models and illustrate the different analysis strategies with observational data collected to compare the accuracy of three distinct non-invasive diagnostic methods for endometriosis. The results indicate that even when the MCAR assumption is plausible, the naive partial analyses should be avoided.

A robust Bayesian approach to null intercept measurement error model with application to dental data

Measurement error models often arise in epidemiological and clinical research. Usually, in this set up it is assumed that the latent variable has a normal distribution. However, the normality assumption may not be always correct. Skew-normal/independent distribution is a class of asymmetric thick-tailed distributions which includes the Skew-normal distribution as a special case. In this paper, we explore the use of skew-normal/independent distribution as a robust alternative to null intercept measurement error model under a Bayesian paradigm. We assume that the random errors and the unobserved value of the covariate (latent variable) follows jointly a skew-normal/independent distribution, providing an appealing robust alternative to the routine use of symmetric normal distribution in this type of model. Specific distributions examined include univariate and multivariate versions of the skew-normal distribution, the skew-t distributions, the skew-slash distributions and the skew contaminated normal distributions. The methods developed is illustrated using a real data set from a dental clinical trial. (C) 2008 Elsevier B.V. All rights reserved.

Thermal analysis of biodegradable microparticles containing ciprofloxacin hydrochloride obtained by spray drying technique

Thermal analysis has been extensively used to obtain information about drug-polymer interactions and to perform pre-formulation studies of pharmaceutical dosage forms. In this work, biodegradable microparticles of poly(D,L-lactide-co-glycolide) (PLGA) containing ciprofloxacin hydrochloride (CP) in various drug:polymer ratios were obtained by spray drying. The main purpose of this study was to investigate the effect of the spray drying process on the drug-polymer interactions and on the stability of microparticles using differential scanning calorimetry (DSC), thermogravimetry (TG) and derivative thermogravimetry (DTG) and infrared spectroscopy (IR). The results showed that the high levels of encapsulation efficiency were dependant on drug:polymer ratio. DSC and TG/DTG analyses showed that for physical mixtures of the microparticles components the thermal profiles were different from those signals obtained with the pure substances. Thermal analysis data disclosed that physical interaction between CP and PLGA in high temperatures had occurred. The DSC and TG profiles for drug-loaded microparticles were very similar to the physical mixtures of components and it was possible to characterize the thermal properties of microparticles according to drug content. These data indicated that the spray dryer technique does not affect the physicochemical properties of the microparticles. In addition, the results are in agreement with IR data analysis demonstrating that no significant chemical interaction occurs between CP and PLGA in both physical mixtures and microparticles. In conclusion, we have found that the spray drying procedure used in this work can be a secure methodology to produce CP-loaded microparticles. (C) 2007 Elsevier B.V. All rights reserved.

Improved Road Design for Future Maintenance - Analysis of Road Barrier Repair Costs

The cost of a road construction over its service life is a function of the design, quality of construction, maintenance strategies and maintenance operations. Unfortunately, designers often neglect a very important aspect which is the possibility to perform future maintenance activities. The focus is mainly on other aspects such as investment costs, traffic safety, aesthetic appearance, regional development and environmental effects. This licentiate thesis is a part of a Ph.D. project entitled “Road Design for lower maintenance costs” that aims to examine how the life-cycle costs can be optimized by selection of appropriate geometrical designs for the roads and their components. The result is expected to give a basis for a new method used in the road planning and design process using life-cycle cost analysis with particular emphasis on road maintenance. The project started with a review of literature with the intention to study conditions causing increased needs for road maintenance, the efforts made by the road authorities to satisfy those needs and the improvement potential by consideration of maintenance aspects during planning and design. An investigation was carried out to identify the problems which obstruct due consideration of maintenance aspects during the road planning and design process. This investigation focused mainly on the road planning and design process at the Swedish Road Administration. However, the road planning and design process in Denmark, Finland and Norway were also roughly evaluated to gain a broader knowledge about the research subject. The investigation was carried out in two phases: data collection and data analysis. Data was collected by semi-structured interviews with expert actors involved in planning, design and maintenance and by a review of design-related documents. Data analyses were carried out using a method called “Change Analysis”. This investigation revealed a complex combination of problems which result in inadequate consideration of maintenance aspects. Several urgent needs for changes to eliminate these problems were identified. Another study was carried out to develop a model for calculation of the repair costs for damages of different road barrier types and to analyse how factors such as road type, speed limits, barrier types, barrier placement, type of road section, alignment and seasonal effects affect the barrier damages and the associated repair costs. This study was carried out using a method called the “Case Study Research Method”. Data was collected from 1087 barrier repairs in two regional offices of the Swedish Road Administration, the Central Region and the Western Region. A table was established for both regions containing the repair cost per vehicle kilometre for different combinations of barrier types, road types and speed limits. This table can be used by the designers in the calculation of the life-cycle costs for different road barrier types.

Data based Calibration System for Radar used by Vehicle Activated Signs

The accurate measurement of a vehicle’s velocity is an essential feature in adaptive vehicle activated sign systems. Since the velocities of the vehicles are acquired from a continuous wave Doppler radar, the data collection becomes challenging. Data accuracy is sensitive to the calibration of the radar on the road. However, clear methodologies for in-field calibration have not been carefully established. The signs are often installed by subjective judgment which results in measurement errors. This paper develops a calibration method based on mining the data collected and matching individual vehicles travelling between two radars. The data was cleaned and prepared in two ways: cleaning and reconstructing. The results showed that the proposed correction factor derived from the cleaned data corresponded well with the experimental factor done on site. In addition, this proposed factor showed superior performance to the one derived from the reconstructed data.

Local politico-administrative perspectives on quality improvement based on national registry data in Sweden : a qualitative study using the Consolidated Framework for Implementation Research.

Background. Through a national policy agreement, over 167 million Euros will be invested in the Swedish National Quality Registries (NQRs) between 2012 and 2016. One of the policy agreement¿s intentions is to increase the use of NQR data for quality improvement (QI). However, the evidence is fragmented as to how the use of medical registries and the like lead to quality improvement, and little is known about non-clinical use. The aim was therefore to investigate the perspectives of Swedish politicians and administrators on quality improvement based on national registry data. Methods. Politicians and administrators from four county councils were interviewed. A qualitative content analysis guided by the Consolidated Framework for Implementation Research (CFIR) was performed. Results. The politicians and administrators perspectives on the use of NQR data for quality improvement were mainly assigned to three of the five CFIR domains. In the domain of intervention characteristics, data reliability and access in reasonable time were not considered entirely satisfactory, making it difficult for the politico-administrative leaderships to initiate, monitor, and support timely QI efforts. Still, politicians and administrators trusted the idea of using the NQRs as a base for quality improvement. In the domain of inner setting, the organizational structures were not sufficiently developed to utilize the advantages of the NQRs, and readiness for implementation appeared to be inadequate for two reasons. Firstly, the resources for data analysis and quality improvement were not considered sufficient at politico-administrative or clinical level. Secondly, deficiencies in leadership engagement at multiple levels were described and there was a lack of consensus on the politicians¿ role and level of involvement. Regarding the domain of outer setting, there was a lack of communication and cooperation between the county councils and the national NQR organizations. Conclusions. The Swedish experiences show that a government-supported national system of well-funded, well-managed, and reputable national quality registries needs favorable local politico-administrative conditions to be used for quality improvement; such conditions are not yet in place according to local politicians and administrators.

Using Spatiotemporal Methods to Fill Gaps In Energy Usage Interval Data

Researchers analyzing spatiotemporal or panel data, which varies both in location and over time, often find that their data has holes or gaps. This thesis explores alternative methods for filling those gaps and also suggests a set of techniques for evaluating those gap-filling methods to determine which works best.

Effective Data Management Enables Intelligent Utility Management

Instrumentation and automation plays a vital role to managing the water industry. These systems generate vast amounts of data that must be effectively managed in order to enable intelligent decision making. Time series data management software, commonly known as data historians are used for collecting and managing real-time (time series) information. More advanced software solutions provide a data infrastructure or utility wide Operations Data Management System (ODMS) that stores, manages, calculates, displays, shares, and integrates data from multiple disparate automation and business systems that are used daily in water utilities. These ODMS solutions are proven and have the ability to manage data from smart water meters to the collaboration of data across third party corporations. This paper focuses on practical, utility successes in the water industry where utility managers are leveraging instantaneous access to data from proven, commercial off-the-shelf ODMS solutions to enable better real-time decision making. Successes include saving $650,000 / year in water loss control, safeguarding water quality, saving millions of dollars in energy management and asset management. Immediate opportunities exist to integrate the research being done in academia with these ODMS solutions in the field and to leverage these successes to utilities around the world.

PDA, Circulation, and Over-Budget Requests: Harnessing Data to Inform Library Strategies

This article presents the data-rich findings of an experiment with enlisting patron-driven/demand-driven acquisitions (DDA) of ebooks in two ways. The first experiment entailed comparison of DDA eBook usage against newly ordered hardcopy materials’ circulation, both overall and ebook vs. print usage within the same subject areas. Secondly, this study experimented with DDA ebooks as a backup plan for unfunded requests left over at the end of the fiscal year.

PDA, Circulation, and Over-Budget Requests: Harnessing Data to Inform Library Strategies

This article presents the data-rich findings of an experiment with enlisting patron-driven/demand-driven acquisitions (DDA) of ebooks in two ways. The first experiment entailed comparison of DDA eBook usage against newly ordered hardcopy materials’ circulation, both overall and ebook vs. print usage within the same subject areas. Secondly, this study experimented with DDA ebooks as a backup plan for unfunded requests left over at the end of the fiscal year.

An Environmental Analysis Corroborating PDA and the Winthrop Example

Libraries seek active ways to innovate amidst macroeconomic shifts, growing online education to help alleviate ever-growing schedule conflicts as students juggle jobs and course schedules, as well as changing business models in publishing and evolving information technologies. Patron-driven acquisition (PDA), also known as demand-driven acquisition (DDA), offers numerous strengths in supporting university curricula in the context of these significant shifts. PDA is a business model centered on short-term loans and subsequent purchases of ebooks resulting directly from patrons' natural use stemming from their discovery of the ebooks in library catalogs where the ebooks' bibliographic records are loaded at regular intervals established between the library and ebook supplier. Winthrop University's PDA plan went live in October 2011, and this article chronicles the philosophical and operational considerations, the in-library collaboration, and technical preparations in concert with the library system vendor and ebook supplier. Short-term loan is invoked after a threshold is crossed, typically number of pages or time spent in the ebook. After a certain number of short-term loans negotiated between the library and ebook supplier, the next short-term loan becomes an automatic purchase after which the library owns the ebook in perpetuity. Purchasing options include single-user and multi-user licenses. Owing to high levels of need in college and university environments, Winthrop chose the multi-user license as the preferred default purchase. Only where multi-user licenses are unavailable does the automatic purchase occur with single-user title licenses. Data on initial use between October 2011 and February 2013 reveal that of all PDA ebooks viewed, only 30% crossed the threshold into short-term loans. Of all triggered short-term loans, Psychology was the highest-using. Of all ebook views too brief to trigger short-term loans, Business was the highest-using area. Although the data are still too young to draw conclusions after only a few months, thought-provoking usage differences between academic disciplines have begun to emerge. These differences should be considered in library plans for the best possible curricular support for each academic program. As higher education struggles with costs and course-delivery methods libraries have an enduring lead role.

Using Interlibrary Loan Data as a Section Tool: ILL Trails Provide Collection Clues

This article describes analyzing Interlibrary Loan data to help inform collection management decision and offers guidance for formulating policies for discerning borrowed titles indicative of gaps in the library from special-interest pursuits beyond the scope of the university curriculum.

Custos de ajustamento e a dinâmica da estrutura de capital em empresas brasileiras

Diversos estudos de Finanças Corporativas consideram os custos associados aos ajustes da estrutura de capital das empresas irrelevantes tanto na forma quanto em magnitude. Este estudo analisou empiricamente a influência dos custos de ajustamento na dinâmica dos ajustes da estrutura de capital de empresas brasileiras de capital aberto no período de 1999 a 2007. A alavancagem foi abordada sob três diferentes cenários, considerando a presença de custos fixos, custos proporcionais e por uma composição de custos fixos e proporcionais através de simulações utilizando um modelo reduzido da estrutura de capital. Em seguida a análise não paramétrica da amostra revelou que as empresas apresentam um comportamento dinâmico em suas decisões de financiamento para o ajuste da estruturas de capital, mas que não se revelou contínuo. A utilização de um modelo de duration mostrou-se adequado para mensurar o intervalo de tempo entre os ajustes da estrutura de capital das empresas. Os resultados são extremamente relevantes e suportam a teoria de um comportamento de rebalanceamento dinâmico pelas empresas de suas estruturas de capital em torno de um intervalo ótimo. Entretanto os ajustes não ocorrem de forma imediata e a persistência de choques à estrutura de capital deve-se em sua maior parte aos custos associados aos ajustes do que a uma possível indiferença à estrutura de capital. . Este trabalho constitui-se como pioneiro no mercado brasileiro acerca dos custos de ajustamento da estrutura de capital e abre espaço para a discussão do comportamento ótimo em torno da estrutura de capital de empresas nacionais.