Mineral supplementation and productivity of the Shiitake mushroom on eucalyptus logs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação do processo oxidativo avançado por permanganato de potássio no tratamento de solos contaminados com idrocarbonetos poliaromáticos

The soil contamination with petroleum is one of the major concern of industries operating in the field and also of environmental agencies. The petroleum consists mainly of alkanes and aromatic hydrocarbons. The most common examples of hydrocarbons polyaromatic are: naphthalene, anthracene, phenanthrene, benzopyrene and their various isomers. These substances cause adverse effects on human and the environment. Thus, the main objective of this work is to study the advanced oxidation process using the oxidant potassium permanganate (KMnO4) for remediation of soils contaminated with two polyaromatic hydrocarbons (PAHs): anthracene and phenanthrene. This study was conducted at bench scale, where the first stage was at batch experiment, using the variables: the time and oxidant dosage in the soil. The second stage was the remediation conducted in continous by a fix column, to this stage, the only variable was remediation time. The concentration of oxidant in this stage was based on the best result obtained in the tests at batch, 2,464 mg / L. The results of degradation these contaminants were satisfactory, at the following dosages and time: (a) 5g of oxidant per kg soil for 48 hours, it was obtained residual contaminants 28 mg phenanthrene and 1.25 mg anthracene per kg of soil and (b) for 7g of oxidant per kg soil in 48 hours remaining 24 mg phenanthrene and anthracene 0.77 mg per kg soil, and therefore below the intervention limit residential and industrial proposed by the State Company of Environmental Sao Paulo (CETESB)

Eficiência e viabilidade econômica do controle químico da ferrugem do eucalipto em condições de campo

Originária da América do Sul, a ferrugem do eucalipto causada pelo fungo Puccinia psidii, vem se tornando uma doença limitante para a cultura do eucalipto no Brasil, exigindo a adoção de estratégias de controle, dentre as quais está o controle químico. Para avaliar eficiência e viabilidade econômica de fungicidas no controle da ferrugem do eucalipto, montou-se um ensaio a campo. Para a instalação do ensaio, utilizou-se o delineamento em blocos ao acaso, em esquema fatorial 3 x 3 (3 produtos e 3 doses), sendo 0,5, 1,0 e 1,5 mL ou g do produto comercial por litro de solução. Os tratamentos foram: 1-) Testemunha; 2-) Fungicida azoxistrobina (estrobilurina); 3-) Fungicida tebuconazol (triazol); 4-) Fungicida tebuconazol + trifloxistrobina (triazol + estrobilurina). O experimento constou de quatro repetições, com avaliação da severidade das plantas. As avaliações foram efetuadas com base no percentual de área foliar lesionada. Verificou-se que com o aumento na dosagem dos fungicidas, houve maior redução da doença nas plantas aos 7 e 15 dias pós-aplicação. O fungicida tebuconazol + trifloxistrobina a 1,5 mL/L foi o mais eficiente contra a ferrugem do eucalipto em condições de campo. O fungicida tebuconazol apresentou maior viabilidade econômica nas três doses testadas.

Efeito do nitrogenio na nutrição do girassol

Nitrogen (N), besides being one of the macro more absorbed by plants, is the that most limits the production of sunflower. The aim of this study was to evaluate the nutrient content in leaves, grains and nutrient export due to nitrogen levels in sunflower cultivation. A randomized experimental block design consisting of five treatments and four replications: T1 - 50 kg N ha(-1) divided by 10, 20 and 20 kg ha(-1), T2 - 70 kg N ha(-1) divided by 10, 30 and 30 kg ha(-1); T3 - 90 kg N ha(-1) divided by 10, 40 and 40 kg ha(-1), T4 - 110 kg N ha(-1) divided by 10, 50 and 50 kg ha(-1), T5 - 130 kg N ha(-1) divided by 10, 60 and 60 kg ha(-1). These applications were made in installments when sowing and 34 and 48 days after sowing. The parameters were evaluated in leaf nutrient content, nutrient content in grains and nutrient export. Under the experimental conditions it was found that the optimum foliar N were purchased at a dosage above 110 kg ha-1 N. With the increasing amount of N supplied in the sunflower crop was exported over this element, but not at the same rate of increase in dosage. The lowest dose of N the lowest rates of export of P, K, Mg, S, B, Cu, Mn and Zn, while increasing the dose of this nutrient decreased the export of Ca.

Estratégia de gestão ambiental baseada nos princípios da produção mais limpa : um estudo de caso focado no segmento da carcinicultura

The objective of this scientific article is to introduce the opportunities of implementation of cleaner production (CP) in a shrimp culture farm. The methodology used for this was exploratory research implemented in a production unit located in the Northeast Brazil. The scientific article approaches since generic aspects of the technique about the management to use water, energy and the effluent characterization of this productive activity. It discusses quantitative aspects, environmental questions and chances of P+L during the productive process phases. The results points to input economy in the form of feed, soil correctives, medicines, and energy applied to the process, which range from 4% to 27%, emphasizing the small profit should be viewed as a source of considerable environment return. The authors conclude for the adoption property of this technique in this agribusiness segment, point out to the management importance of the input dosage in the quality of the final effluent, besides the adoption of a physical-chemistry remediation mechanism to the residual of Sodium metabissulphite used in the process of shrimp caught

Flotação por ar dissolvido na clarificação de águas com baixa turbidez utilizando sulfato de alumínio e sementes de Moringa oleifera como coagulantes

This work aims to investigate the process of Dissolved air Flotation (DAF) for clarifying water samples with low turbidity using aluminum sulphate and Moringa oleifera seeds as coagulants. The experimental procedure was carried out in a bench scale flotation unit. The influences on the pre-treatment conditions (coagulant dosage and flocculation time) and flotation parameters (superficial application rate and recirculation rate) were evaluated considering the efficiency of the process. The efficiency was evaluated by determining the turbidity of the untreated and treated water samples. The results obtained showed that turbidity reduction can be obtained very efficiently by using DAF and the latter coagulant in low turbidity water. Using aluminum sulphate in pH´s 5.0 and 6.0 better efficiencies were obtained with low concentrations (15 mg/L), achieving values of 92% of turbidity reduction. In the case of use of Moringa oleifera better efficiencies of reduction of turbidity were reported when using a concentration of 50 mg/L in all range of pH´s, achieving 86% of reduction. The zeta potential was also determined, in an attempt to aid comprehension of the coagulation mechanisms involved. The coagulation mechanisms with Moringa oleifera seeds were shown to be adsorption and charge neutralization, as well as adsorption and bridging. Concerning aluminum sulphate, the predominant mechanisms are adsorption and charge neutralization and enmeshment in a precipitate. The results indicate that for low turbidity water, Moringa oleifera seeds could potentially be a viable substitute for aluminum sulphate

Obtenção de emulsões asfálticas modificadas utilizando resíduos industriais

The main objective of this research was the development and characterization of conventional and modified cationic asphalt emulsions. The asphalt emulsions were developed by using the Petroleum Asphalt Cement (CAP 50-70) from Fazenda Belém (Petrobras -Aracati-Ce). The first step in this research was the development of the oil phase (asphalt + solvent) and the aqueous phase (water + emulsifying agent + acid + additives), separately. During the experiments for the obtaining of the conventional asphalt emulsion, the concentration of each constituent was evaluated. For the obtaining of the oil phase, kerosene was used as solvent at 15 and 20 wt.%. For the development of the aqueous phase, the emulsifying agent was used at 0.3 and 3.0 wt.%, whereas the acid and the additive were set at 0.3 wt.%. The percentage of asphalt in the asphalt emulsion was varied in 50, 55, and 60 wt.% and the heating temperature was set at 120 °C. The aqueous phase in the asphalt emulsion was varied from 16.4 to 34.1 wt.% and the heating temperature was set at 60 °C. After the obtaining of the oil and the aqueous phases, they were added at a colloidal mill, remaining under constant stirring and heating during 15 minutes. Each asphalt emulsion was evaluated considering: sieve analysis, Saybolt Furol viscosity, pH determination, settlement and storage stability, residue by evaporation, and penetration of residue. After the characterization of conventional emulsions, it was chosen the one that presented all properties in accordance with Brazilian specifications (DNER-EM 369/97). This emulsion was used for the development of all modified asphalt emulsions. Three polymeric industrial residues were used as modifier agents: one from a clothing button industry (cutouts of clothing buttons) and two from a footwear industry (cutouts of sandals and tennis shoes soles), all industries located at Rio Grande do Norte State (Brazil).The polymeric residues were added into the asphalt emulsion (1 to 6 wt.%) and the same characterization rehearsals were accomplished. After characterization, it were developed the cold-mix asphalts. It was used the Marshall mix design. For cold-mix asphalt using the conventional emulsion, it was used 5, 6 and 7 wt.% asphalt emulsion. The conventional mixtures presented stability values according Brazilian specification (DNER-369/97). For mixtures containing asphalt modified emulsions, it was observed that the best results were obtained with emulsions modified by button residue

Incorporação de lodo de esgoto na massa cerâmica para fabricação de tijolos maciços: uma alternativa para a disposição final de resíduo

The disposal of sewage sludge is a growing problem face up to management of sanitary sevices. Otherwise, because its making process characteristic, the Ceramic Industry can tolerate the presence of this wastes as raw material. This study has as object to confirm the use of the sewage sluge in the Ceramic Industry like a sustentable alternative for its disposal. Futhermore, this study quests to evaluate the maximum proportion for incorporation of sludge wich result in technically and enviromentally suitable bricks. For found this proportion, the research consisted of (1) making of bricks in full scale, adde up 0%, 5%,10%, 15%, 20%, 25%,30%, 35% e 40% sludge, with size 220x105x45 mm, hand-molded by rammer and baked by industrial kiln; and (2) tecnical and enviromental evaluation of this bricks, according to Brazilian norms. The raw material uses were two distinct clays come from Goianinha/RN and sewage comes from a septic system tank and pumped into tank vehicle, of Natal/RN. The technical evaluation allowed to conclude the addiotion of the sludge brings about signifcant lost of mass and the water absorption grew up according to increase of sludge: every sludge-amended clay bricks absorved more water than control group. Thus, the compressive strength was signicantly decreased because the increase of sludge: bricks with 5% sludge added lost 45% of strength achieved at control group; the bricks made with 10 and 20% lost almost 70% of bigger strength. With up to 25% sludge added to the bricks, the streght decreased over 90%. Concerning heavy metal leaching, the two maximum proportion wich have tecnical approval, it means bricks sludge added with 15 and 20%, can say there is no risk of enviromental contamination using those bricks. This way, in this work context, it can to conclude the maximum proportion atends the technical and enviromental criterion is 20%

Ensaios de tratabilidade aplicados a determinação de parâmetros para dimensionamento de processos de tratamento de água de manancial eutrofizado

Eutrophication is a growing process present in the water sources located in the northeast of Brazil. Among the main consequences of these changes in trophic levels of a water source, stands out adding complexity to the treatment to achieve water standards. By these considerations, this study aimed to define, on a laboratory scale, products and operational conditions to be applied in the processing steps using raw water from Gargalheiras dam, RN, Brazil. The dam mentioned shows a high number of cyanobacteria, with a concentration of cells / ml higher than that established by Decree No. 518/04 MS. The same source was also considered by the state environmental agency in 2009 as hypereutrophic. The static tests developed in this research simulated direct filtration (laboratory filters) and pre-oxidation with chlorine and powdered activated carbon adsorption. The research included the evaluation of the coagulants aluminum hydrochloride (HCA) and alum (SA). The development of the research investigated the conditions for rapid mixing, the dosages of coagulants and pHs of coagulation by the drawing of diagrams. The interference of filtration rate and particle size of filtering means were evaluated as samples and the time of contact were tested with chlorine and activated carbon. By the results of the characterization of the raw water source it was possible to identify the presence of a high pH (7.34). The true color was significant (29 uH) in relation to the apparent color and turbidity (66 uH and 13.60 NTU), reflecting in the measurement of organic matter: MON (8.41 mg.L-1) and Abs254 (0.065 cm-1). The optimization of quick mix set time of 17", the speed gradient of 700 s-1 in the coagulation with HCA and the time of 20" with speed gradient of 800 s-1 for SA. The smaller particle sizes of sand filtering means helped the treatment and the variation in filtration rate did not affect significantly the efficiency of the process. The evaluation of the processing steps found adjustment in standard color and turbidity of the Decree nº 518/04 MS, taking in consideration the average values found in raw water. In the treatment using the HCA for direct filtration the palatable pattern based on the apparent color can be achieved with a dose of 25 mg L-1. With the addition of pre-oxidation step, the standard result was achieved with a reduced dose for 12 mgHCA.L-1. The turbidity standard for water was obtained by direct filtration when the dose exceeds 25 mg L-1 of HCA. With pre-oxidation step there is the possibility of reducing the dose to 20 mg L-1.The addition of CAP adsorption, promoted drinking water for both parameters, with even lower dosage, 13 mg L-1 of HCA. With coagulation using SA removal required for the parameter of apparent color it was achieved with pre-oxidation and 22 mgSA.L-1. Despite the satisfactory results of treatment with the alum, it was not possible to provide water with turbidity less than 1.00 NTU even with the use of all stages of treatment

Leptinemia de jejum em crianças e adolescentes eutróficos

OBJETIVO: Determinar, em um grupo de crianças e adolescentes eutróficos, os valores de leptinemia de jejum e sua correlação com idade e Índice de Massa Corporal (IMC). MÉTODOS: Estudo de corte transversal realizado em duas escolas públicas de Ribeirão Preto, Brasil. Foram obtidos medidas antropométricas e amostra de sangue venoso em jejum para dosagem da leptinemia de 448 crianças e adolescentes eutróficos, maturadores médios, de ambos os sexos, com idades entre 7 e 17,9 anos. Utilizando-se o teste de Mann-Whitney foram realizadas comparações entre as concentrações obtidas para meninos e meninas em cada faixa etária. Posteriormente, utilizandose o teste de Kruskal-Wallis, foram comparados os valores em cada faixa etária e, por meio do teste de correlação de Spearman, foi avaliada a correlação entre a leptinemia de jejum e a idade e entre leptinemia de jejum e o escore z do IMC. RESULTADOS: O valores de leptinemia de jejum diferiram entre meninos e meninas em todas as faixas etárias sendo sempre mais elevados para as meninas. Entre os meninos, os valores de leptinemia não apresentam variação estatisticamente significativa; entre as meninas, observou-se variabilidade, com aumento progressivo de acordo com a faixa etária. O estudo de correlação, mostrou que a leptinemia apresenta correlação positiva com o escore z do índice de massa corporal em ambos os sexos. em relação à idade, observou-se correlação apenas entre as meninas. CONCLUSÃO: Os dados apontam para a necessidade do estabelecimento de curvas de referência para a leptinemia de jejum que levem em conta o sexo, a idade e o IMC.

Estrutura genética de populações de Amphobotrys ricini, agente causal do mofo cinzento da mamoneira

The gray mold, causal organism Amphobotrys ricini, is one of the major diseases of castor bean. Difficulties in managing plant disease arises form the limited understanding of the genetic structure of A. ricini, their complexity and variability make it difficult to control. Genetic structure can be used to infer the relative impact of different forces that influence the evolution of pathogen populations, that allow to predict the potencial for pathogen populations to envolve in agricultural ecosystems. Growers protect their crop by applying fungicides, but there aren t fungicides to provide significant control of gray mold of castor bean. The objectives of this work were use RAPD to determine the genetic structure of A. ricini subpopulations in Paraíba and assay the sensitivity of A. ricini isolates to azoxystrobin and carbendazim. To determine the genetic structure of A. ricini subpopulations in Paraíba, 23 isolates were colleted from two different geographic location (subpopulation). These isolates were analysed by RAPD using 22 random decamer primers, purchased from OPERON, produced a total of 80 markers polimorphics. The resulting matrixes were analysed using PopGene version 1.32. Sensitivity to azoxystrobin and carbendazim of 30 isolates, colleted form Paraíba and Alagoas, was estimated based on spore germination and colony growth inhibition. The stock solutions were added toV8 medium after sterilization to produce final concentrations of 0, 0.01, 0.1, 1, 10, and 100 µg/ml of carbendazim and 0, 0.001, 0.01, 0.1, 1, and 10 µg/ml of azoxystrobin. All statistical analyses were performed using SAS to estimate the dose that inhibited fungal growth by 50% (ED50 values). The genetic diversity within subpopulations (Hs=0,271) accounted for 92% of the total genetic diversity (Ht=0,293), while genetic diversity between subpopulations (Gst = 0,075) represented only 7,5%. The estimated number of migrants per generation (NM ) was 6,15. Nei s average gene identity across 80 RAPD loci was 0,9468. Individual ED50 values, for the 30 isolates screened for their sensitivity to azoxystrobin, ranged From a maximum of 0,168 µg/ml to a minimum of 0,0036 µg/ml. The ED50 values for carbendazim varied within the range of 0,026 to 0,316 µg/ml

Análise de fatores clínico-demográficos, psicológicos, hormonais e genéticos na síndrome da ardência bucal e ardor bucal secundário

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Álcool e comportamento: efeitos na aprendizagem e memória

Excessive alcohol consumption is responsible for many harmful effects on individuals and society. Despite years of research, the mechanisms by which alcohol affects neurological functions and the exact causes of cognitive impairment related to long-term use are unknown. In this sense, this master study proposed to observe how different doses of alcohol affect the addiction response and the learning ability of two fish species: Betta splendens and Danio rerio, the latter a commonly model due to organizational and functional characteristics shared with mammals. For this, different concentrations of ethanol (0%, 0.1%, 0.25%, 1% and 1.5%) were used in acute, chronic and withdrawal treatments. We tested the fish in three experimental protocols: 1) alcohol addiction potential using conditioned place preference, 2) associative conditioning using light as unconditioned stimulus and food as conditioned stimulus and 3) spatial learning using a maze without cues. For the alcohol addiction potential, preference between two different places in a shuttle box was tested before and after alcohol exposure (chronic and acute). In this test, the animals intoxicated by 0.1% did not change behavior, while animals receiving 1% and 1.5% alcohol changed the initial preference to the side where they received alcohol For the associative conditioning, the results show that the groups undergoing low dose (0.1%), both in chronic and withdrawal treatment, learned the task faster than control; groups under 0.25 and 1% alcohol withdrawal learned the task after control; groups chronically intoxicated with these doses did not learn the task. For the spatial learning test, fish submitted to acute and chronic treatments decreased the time to exit the maze; there were significant differences in the animal s performance in a dose-dependent pattern. This difference was not observed for the withdrawal treatment. Given these results, we conclude that the effects of alcohol on learning are dependent on the dosage. Furthermore, low doses of alcohol seem to maximize animal performance on learning tasks and do not alter their seeking behavior, while higher doses induced addition and hinder learning

Correlato hormonal do comportamento reprodutivo de machos de sagüi comum (Callithrix jacchus) em ambiente natural

Contrary to what is recorded for Callithrix jacchus females, the social interactions and hormonal profiles of males are less studied, and mainly in wild groups. The goal of this study was to investigate the behavioral and endocrine profiles of reproductive (RMs) and non-reproductive (NRs) common marmoset adult free-ranging males living in two natural groups (GC1 and GR2). The groups inhabited the area of the Escola Agrícola de Jundiaí/UFRN, located in Macaíba, Brazil. Fecal collection for cortisol and androgen measurement and behavioral monitoring was carried out during the active phase from April to September, 2005. For behavioral data collection the focal instantaneous method was used every 5 min, for a total of 11.563 records. Statistical analysis was performed using non parametric tests and p < 0.05. Besides showing diurnal variation, the frequency of affiliative behaviors was significantly higher for RMs toward reproductive females than for NRs. Affiliative interactions of RMs with both reproductive females and NRs were similar, probably related to pair bond formation and helper recruitment, respectively. Parental care was also similar for both RMs and NRs. Both androgen and cortisol levels increased after the birth of the infants, mainly in RMs. The longitudinal profile of androgens fluctuates more in response to agonistic encounters and sexual behavior than that of cortisol. The mean basal excretion of both hormones was significantly higher in RMs and seems to reflect their higher participation in territorial vigilance and mate guarding behaviors. Significant positive correlations were found between agonism and cortisol and androgen hormones. These results describe, for the first time, the behavioral and hormonal profiles of common marmosets living in free-ranging groups and suggest that reproductive males are more responsive both behaviorally and hormonally to social group dynamics

Análise química de produtos de incrustação em dutos de petróleo por espectometria de fluorescência de raios X

The quantitative chemical characterization of the inorganic fraction of scale products is very relevant in studying, monitoring and controlling corrosive processes of oil pipelines. The X-ray fluorescence spectrometry (XRF) is a very versatile analytical technique, which can be used in quantitative analysis in solid samples at low concentrations of the chemical element, in the order of few ppm. A methodology that involves sample preparation diluted in the proportion of 1:7 (one portion of the sample for seven of wax), pressed as pellets was used in the XRF calibration for chemical analysis of scale products from oil pipelines. The calibration involved the preparation of reference samples from mixtures of P.A. reagents, aiming to optimize the time consumed in the steps of sample preparation and analysis of Al, Ba, Ca, Fe, K, Mg, Mn, Na, P, S, Si, Sr and Ti, using the same pressed pellet for trace and major elements analysis