Design of a Dissolving Microneedle Platform for Transdermal Delivery of a Fixed-Dose Combination of Cardiovascular Drugs

Microneedles (MNs) are a minimally invasive drug delivery platform, designed to enhance transdermal drug delivery by breaching the stratum corneum. For the first time, this study describes the simultaneous delivery of a combination of three drugs using a dissolving polymeric MN system. In the present study, aspirin, lisinopril dihydrate, and atorvastatin calcium trihydrate were used as exemplar cardiovascular drugs and formulated into MN arrays using two biocompatible polymers, poly(vinylpyrrollidone) and poly(methylvinylether/maleic acid). Following fabrication, dissolution, mechanical testing, and determination of drug recovery from the MN arrays, in vitro drug delivery studies were undertaken, followed by HPLC analysis. All three drugs were successfully delivered in vitro across neonatal porcine skin, with similar permeation profiles achieved from both polymer formulations. An average of 126.3 ± 18.1 μg of atorvastatin calcium trihydrate was delivered, notably lower than the 687.9 ± 101.3 μg of lisinopril and 3924 ± 1011 μg of aspirin, because of the hydrophobic nature of the atorvastatin molecule and hence poor dissolution from the array. Polymer deposition into the skin may be an issue with repeat application of such a MN array, hence future work will consider more appropriate MN systems for continuous use, alongside tailoring delivery to less hydrophilic compounds.

Synchrophasor-Based Islanding Detection for Distributed Generation Systems Using Systematic Principal Component Analysis Approaches

Systematic principal component analysis (PCA) methods are presented in this paper for reliable islanding detection for power systems with significant penetration of distributed generations (DGs), where synchrophasors recorded by Phasor Measurement Units (PMUs) are used for system monitoring. Existing islanding detection methods such as Rate-of-change-of frequency (ROCOF) and Vector Shift are fast for processing local information, however with the growth in installed capacity of DGs, they suffer from several drawbacks. Incumbent genset islanding detection cannot distinguish a system wide disturbance from an islanding event, leading to mal-operation. The problem is even more significant when the grid does not have sufficient inertia to limit frequency divergences in the system fault/stress due to the high penetration of DGs. To tackle such problems, this paper introduces PCA methods for islanding detection. Simple control chart is established for intuitive visualization of the transients. A Recursive PCA (RPCA) scheme is proposed as a reliable extension of the PCA method to reduce the false alarms for time-varying process. To further reduce the computational burden, the approximate linear dependence condition (ALDC) errors are calculated to update the associated PCA model. The proposed PCA and RPCA methods are verified by detecting abnormal transients occurring in the UK utility network.

Storage of sediment-associated nutrients and contaminants in river channel and floodplain systems

Samples of fine-grained channel bed sediment and overbank floodplain deposits were collected along the main channels of the Rivers Aire (and its main tributary, the River Calder) and Swale, in Yorkshire, UK, in order to investigate downstream changes in the storage and deposition of heavy metals (Cr, Cu, Pb, Zn), total P and the sum of selected PCB congeners, and to estimate the total storage of these contaminants within the main channels and floodplains of these river systems. Downstream trends in the contaminant content of the <63 μm fraction of channel bed and floodplain sediment in the study rivers are controlled mainly by the location of the main sources of the contaminants, which varies between rivers. In the Rivers Aire and Calder, the contaminant content of the <63 μm fraction of channel bed and floodplain sediment generally increases in a downstream direction, reflecting the location of the main urban and industrialized areas in the middle and lower parts of the basin. In the River Swale, the concentrations of most of the contaminants examined are approximately constant along the length of the river, due to the relatively unpolluted nature of this river. However, the Pb and Zn content of fine channel bed sediment decreases downstream, due to the location of historic metal mines in the headwaters of this river, and the effect of downstream dilution with uncontaminated sediment. The magnitude and spatial variation of contaminant storage and deposition on channel beds and floodplains are also controlled by the amount of <63 μm sediment stored on the channel bed and deposited on the floodplain during overbank events. Consequently, contaminant deposition and storage are strongly influenced by the surface area of the floodplain and channel bed. Contaminant storage on the channel beds of the study rivers is, therefore, generally greatest in the middle and lower reaches of the rivers, since channel width increases downstream. Comparisons of the estimates of total storage of specific contaminants on the channel beds of the main channel systems of the study rivers with the annual contaminant flux at the catchment outlets indicate that channel storage represents <3% of the outlet flux and is, therefore, of limited importance in regulating that flux. Similar comparisons between the annual deposition flux of specific contaminants to the floodplains of the study rivers and the annual contaminant flux at the catchment outlet, emphasise the potential importance of floodplain deposition as a conveyance loss. In the case of the River Aire the floodplain deposition flux is equivalent to between ca. 2% (PCBs) and 36% (Pb) of the outlet flux. With the exception of PCBs, for which the value is ≅0, the equivalent values for the River Swale range between 18% (P) and 95% (Pb). The study emphasises that knowledge of the fine-grained sediment delivery system operating in a river basin is an essential prerequisite for understanding the transport and storage of sediment-associated contaminants in river systems and that conveyance losses associated with floodplain deposition exert an important control on downstream contaminant fluxes and the fate of such contaminants. © 2003 Elsevier Science Ltd. All rights reserved.

Realist synthesis: Critical care rapid response systems.

Background Rapid Response Systems (RRS) consist of four interrelated and interdependent components; an event detection and trigger mechanism, a response strategy, a governance structure and process improvement system. These multiple components of the RRS pose problems in evaluation as the intervention is complex and cannot be evaluated using a traditional systematic review. Complex interventions in healthcare aimed at changing service delivery and related behaviour of health professionals require a different approach to summarising the evidence. Realist synthesis is such an approach to reviewing research evidence on complex interventions to provide an explanatory analysis of how and why an intervention works or doesn’t work in practice. The core principle is to make explicit the underlying assumptions about how an intervention is suppose to work (ie programme theory) and then use this theory to guide evaluation. Methods A realist synthesis process was used to explain those factors that enable or constrain the success of RRS programmes. Results The findings from the review include the articulation of the RRS programme theories, evaluation of whether these theories are supported or refuted by the research evidence and an evaluation of evidence to explain the underlying reasons why RRS works or doesn’t work in practice. Rival conjectured RRS programme theories were identified to explain the constraining factors regarding implementation of RRS in practice. These programme theories are presented using a logic model to highlight all the components which impact or influence the delivery of RRS programmes in the practice setting. The evidence from the realist synthesis provided the foundation for the development of hypothesis to test and refine the theories in the subsequent stages of the Realist Evaluation PhD study [1]. This information will be useful in providing evidence and direction for strategic and service planning of acute care to improve patient safety in hospital. References: McGaughey J, Blackwood B, O’Halloran P, Trinder T. J. & Porter S. (2010) Realistic Evaluation of Early Warning Systems and the Acute Life-threatening Events – Recognition and Treatment training course for early recognition and management of deteriorating ward-based patients: research protocol. Journal of Advanced Nursing 66 (4), 923-932.

A realistic evaluation of track and trigger systems and acute care training for early recognition and treatment of deteriorating ward-based patients: research protocol.

Aim The aim of the study is to evaluate factors that enable or constrain the implementation and service delivery of early warnings systems or acute care training in practice. Background To date there is limited evidence to support the effectiveness of acute care initiatives (early warning systems, acute care training, outreach) in reducing the number of adverse events (cardiac arrest, death, unanticipated Intensive Care admission) through increased recognition and management of deteriorating ward based patients in hospital [1-3]. The reasons posited are that previous research primarily focused on measuring patient outcomes following the implementation of an intervention or programme without considering the social factors (the organisation, the people, external influences) which may have affected the process of implementation and hence measured end-points. Further research which considers the social processes is required in order to understand why a programme works, or does not work, in particular circumstances [4]. Method The design is a multiple case study approach of four general wards in two acute hospitals where Early Warning Systems (EWS) and Acute Life-threatening Events Recognition and Treatment (ALERT) course have been implemented. Various methods are being used to collect data about individual capacities, interpersonal relationships and institutional balance and infrastructures in order to understand the intended and unintended process outcomes of implementing EWS and ALERT in practice. This information will be gathered from individual and focus group interviews with key participants (ALERT facilitators, nursing and medical ALERT instructors, ward managers, doctors, ward nurses and health care assistants from each hospital); non-participant observation of ward organisation and structure; audit of patients' EWS charts and audit of the medical notes of patients who deteriorated during the study period to ascertain whether ALERT principles were followed. Discussion & progress to date This study commenced in January 2007. Ethical approval has been granted and data collection is ongoing with interviews being conducted with key stakeholders. The findings from this study will provide evidence for policy-makers to make informed decisions regarding the direction for strategic and service planning of acute care services to improve the level of care provided to acutely ill patients in hospital. References 1. Esmonde L, McDonnell A, Ball C, Waskett C, Morgan R, Rashidain A et al. Investigating the effectiveness of Critical Care Outreach Services: A systematic review. Intensive Care Medicine 2006; 32: 1713-1721 2. McGaughey J, Alderdice F, Fowler R, Kapila A, Mayhew A, Moutray M. Outreach and Early Warning Systems for the prevention of Intensive Care admission and death of critically ill patients on general hospital wards. Cochrane Database of Systematic Reviews 2007, Issue 3. www.thecochranelibrary.com 3. Winters BD, Pham JC, Hunt EA, Guallar E, Berenholtz S, Pronovost PJ (2007) Rapid Response Systems: A systematic review. Critical Care Medicine 2007; 35 (5): 1238-43 4. Pawson R and Tilley N. Realistic Evaluation. London; Sage: 1997

Early warning systems: problems, pragmatics and potential

Symposium Chair: Dr Jennifer McGaughey

Title: Early Warning Systems: problems, pragmatics and potential

Early Warning Systems (EWS) provide a mechanism for staff to recognise, refer and manage deteriorating patients on general hospital wards. Implementation of EWS in practice has required considerable change in the delivery of critical care across hospitals. Drawing their experience of these changes the authors will demonstrate the problems and potential of using EWS to improve patient outcomes.

The first paper (Dr Jennifer McGaughey: Early Warning Systems: what works?) reviews the research evidence regarding the factors that support or constrain the implementation of Early Warning System (EWS) in practice. These findings explain those processes which impact on the successful achievement of patient outcomes. In order to improve detection and standardise practice National EWS have been implemented in the United Kingdom. The second paper (Catherine Plowright: The implementation of the National EWS in a District General Hospital) focuses on the process of implementing and auditing a National EWS. This process improvement is essential to contribute to future collaborative research and collection of robust datasets to improve patient safety as recommended by the Royal College of Physicians (RCP 2012). To successfully implement NEWS in practice requires strategic planning and staff education. The practical issues of training staff is discussed in the third paper. This paper (Collette Laws-Chapman: Simulation as a modality to embed the use of Early Warning Systems) focuses on using simulation and structured debrief to enhance learning in the early recognition and management of deteriorating patients. This session emphasises the importance of cognitive and social skills developed alongside practical skills in the simulated setting.

An efficient method for optimal location and sizing of fixed and switched shunt capacitors in large distribution systems

This paper proposes a computationally efficient methodology for the optimal location and sizing of static and switched shunt capacitors in large distribution systems. The problem is formulated as the maximization of the savings produced by the reduction in energy losses and the avoided costs due to investment deferral in the expansion of the network. The proposed method selects the nodes to be compensated, as well as the optimal capacitor ratings and their operational characteristics, i.e. fixed or switched. After an appropriate linearization, the optimization problem was formulated as a large-scale mixed-integer linear problem, suitable for being solved by means of a widespread commercial package. Results of the proposed optimizing method are compared with another recent methodology reported in the literature using two test cases: a 15-bus and a 33-bus distribution network. For the both cases tested, the proposed methodology delivers better solutions indicated by higher loss savings, which are achieved with lower amounts of capacitive compensation. The proposed method has also been applied for compensating to an actual large distribution network served by AES-Venezuela in the metropolitan area of Caracas. A convergence time of about 4 seconds after 22298 iterations demonstrates the ability of the proposed methodology for efficiently handling large-scale compensation problems.

Optimization of export support systems

The present paper is a personal reflection on a work project carried out to promote exports from Portugal to Germany in the IT area, under consideration of the deliverables required by the clients CCILA and Anetie. The project outcome approaches the fact that the majority of the Portuguese market players has disadvantages in size and does rarely coordinate activities among each other, which hinders them to export successfully on a broad scale. To bring together Portuguese delivery potential and German market demand, expert interviews were conducted. Based on the findings, a concept was developed to overcome the domestic collaboration issues in order to strengthen the national exports in the identified sector - embedded systems implementation services for machinery and equipment companies.

Therapeutics bioconjugates: evaluation of iminoboronates as payload delivery system for cancer

The advent of bioconjugation impacted deeply the world of sciences and technology. New biomolecules were found, biological processes were understood, and novel methodologies were formed due to the fast expansion of this area. The possibility of creating new effective therapies for diseases like cancer is one of big applications of this now big area of study. Off target toxicity was always the problem of potent small molecules with high activity towards specific tumour targets. However, chemotherapy is now selective due to powerful linkers that connect targeting molecules with affinity to interesting biological receptors and cytotoxic drugs. This linkers must have very specific properties, such as high stability in plasma, no toxicity, no interference with ligand affinity nor drug potency, and at the same time, be able to lyse once inside the target molecule to release the therapeutic warhead. Bipolar environments between tumour intracellular and extracellular medias are usually exploited by this linkers in order to complete this goal. The work done in this thesis explores a new model for that same task, specific cancer drug delivery. Iminoboronates were studied due to its remarkable selective stability towards a wide pH range and endogenous molecules. A fluorescence probe was design to validate this model by creating an Off/On system and determine the payload release location in situ. A process was optimized to synthetize the probe 8-(1-aminoethyl)-7-hydroxy-coumarin (1) through a reductive amination reaction in a microwave reactor with 61 % yield. A method to conjugate this probe to ABBA was also optimized, obtaining the iminoboronate in good yields in mild conditions. The iminoboronate model was studied regarding its stability in several simulated biological environments and each half-life time was determined, showing the conjugate is stable most of the cases except in tumour intracellular systems. The construction of folate-ABBA-coumarin bioconjugate have been made to complete this evaluation. The ability to be uptaken by a cancer cell through endocytosis process and the conjugation delivery of coumarin fluorescence payload are two features to hope for in this construct.

A New Large-DNA-Fragment Delivery System Based on Integrase Activity from an Integrative and Conjugative Element.

During the past few decades, numerous plasmid vectors have been developed for cloning, gene expression analysis, and genetic engineering. Cloning procedures typically rely on PCR amplification, DNA fragment restriction digestion, recovery, and ligation, but increasingly, procedures are being developed to assemble large synthetic DNAs. In this study, we developed a new gene delivery system using the integrase activity of an integrative and conjugative element (ICE). The advantage of the integrase-based delivery is that it can stably introduce a large DNA fragment (at least 75 kb) into one or more specific sites (the gene for glycine-accepting tRNA) on a target chromosome. Integrase recombination activity in Escherichia coli is kept low by using a synthetic hybrid promoter, which, however, is unleashed in the final target host, forcing the integration of the construct. Upon integration, the system is again silenced. Two variants with different genetic features were produced, one in the form of a cloning vector in E. coli and the other as a mini-transposable element by which large DNA constructs assembled in E. coli can be tagged with the integrase gene. We confirmed that the system could successfully introduce cosmid and bacterial artificial chromosome (BAC) DNAs from E. coli into the chromosome of Pseudomonas putida in a site-specific manner. The integrase delivery system works in concert with existing vector systems and could thus be a powerful tool for synthetic constructions of new metabolic pathways in a variety of host bacteria.

Opportunities and constraints of peri-urban buffalo and dairy cattle systems in Faisalabad, Punjab, Pakistan

In the big cities of Pakistan, peri-urban dairy production plays an important role for household income generation and the supply of milk and meat to the urban population. On the other hand, milk production in general, and peri-urban dairy production in particular, faces numerous problems that have been well known for decades. Peri-urban dairy producers have been especially neglected by politicians as well as non-government-organizations (NGOs). Against this background, a study in Pakistan’s third largest city, Faisalabad (Punjab Province), was carried out with the aims of gathering basic information, determining major constraints and identifying options for improvements of the peri-urban milk production systems. For data collection, 145 peri-urban households (HH) engaged in dairy production were interviewed face to face using a structured and pretested questionnaire with an interpreter. For analyses, HH were classified into three wealth groups according to their own perception. Thus, 38 HH were poor, 95 HH well off and 12 HH rich (26.2%, 65.5% and 8.3%, respectively). The richer the respondents perceived their HH, the more frequently they were actually in possession of high value HH assets like phones, bank accounts, motorbikes, tractors and cars. Although there was no difference between the wealth groups with respect to the number of HH members (about 10, range: 1 to 23), the educational level of the HH heads differed significantly: on average, heads of poor HH had followed education for 3 years, compared to 6 years for well off HH and 8 years for rich HH. About 40% of the poor and well off HH also had off-farm incomes, while the percentage was much higher - two thirds (67%) - for the rich HH. The majority of the HH were landless (62%); the rest (55 HH) possessed agricultural land from 0.1 to 10.1 ha (average 2.8 ha), where they were growing green fodder: maize, sorghum and pearl millet in summer; berseem, sugar cane and wheat were grown in winter. Dairy animals accounted for about 60% of the herds; the number of dairy animals per HH ranged from 2 to 50 buffaloes (Nili-Ravi breed) and from 0 to 20 cows (mostly crossbred, also Sahiwal). About 37% (n=54) of the HH did not keep cattle. About three quarters of the dairy animals were lactating. The majority of the people taking care of the animals were family workers; 17.3% were hired labourers (exclusively male), employed by 11 rich and 32 well off HH; none of the poor HH employed workers, but the percentages were 33.7% for the well off and 91.7% for the rich HH. The total number of workers increased significantly with increasing wealth (poor: 2.0; well off:2.5; rich: 3.4). Overall, 69 female labourers were recorded, making up 16.8% of employed workers and one fourth of the HH’s own labourers. Apparently, their only duty was to clean the animals´ living areas; only one of them was also watering and showering the animals. Poor HH relied more on female workers than the other two groups: 27.1% of the workers of poor HH were women, but only 14.8% and 6.8% of the labour force of well off and rich HH were female. Two thirds (70%) of the HH sold milk to dhodis (middlemen) and one third (35%) to neighbours; three HH (2%) did doorstep delivery and one HH (1%) had its own shop. The 91 HH keeping both species usually sold mixed milk (97%). Clients for mixed and pure buffalo milk were dhodis (78%, respectively 59%) and neighbours (28%, respectively 47%). The highest milk prices per liter (Pakistani Rupees, 100 PKR @ 0.8 Euro) were paid by alternative clients (44 PKR; 4 HH), followed by neighbours (40 PKR, 50 HH); dhodis paid lower prices (36 PKR, 99 HH). Prices for pure buffalo and mixed milk did not differ significantly. However, HH obtaining the maximum price from the respective clients for the respective type of milk got between 20% (mixed milk, alternative clients) and 68% (mixed milk, dhodi) more than HH fetching the minimum price. Some HH (19%) reported 7% higher prices for the current summer than the preceding winter. Amount of milk sold and distance from the HH to the city center did not influence milk prices. Respondents usually named problems that directly affected their income and that were directly and constantly visible to them, such as high costs, little space and fodder shortages. Other constraints that are only influencing their income indirectly, e.g. the relatively low genetic potential of their animals due to neglected breeding as well as the short- and long-term health problems correlated with imbalanced feeding and insufficient health care, were rarely named. The same accounts for problems accompanying improper dung management (storage, disposal, burning instead of recycling) for the environment and human health. Most of the named problems are linked to each other and should be addressed within the context of the entire system. Therefore, further research should focus on systematic investigations and improvement options, taking a holistic and interdisciplinary approach instead of only working in single fields. Concerted efforts of dairy farmers, researchers, NGOs and political decision makers are necessary to create an economic, ecological and social framework that allows dairy production to serve the entire society. For this, different improvement options should be tested in terms of their impact on environment and income of the farmers, as well as feasibility and sustainability in the peri-urban zones of Faisalabad.

Logistics Network Design with Differentiated Delivery Lead-Time: Benefits and Insights

Most logistics network design models assume exogenous customer demand that is independent of the service time or level. This paper examines the benefits of segmenting demand according to lead-time sensitivity of customers. To capture lead-time sensitivity in the network design model, we use a facility grouping method to ensure that the different demand classes are satisfied on time. In addition, we perform a series of computational experiments to develop a set of managerial insights for the network design decision making process.

Apatite-Polymer Composites for the Controlled Dual Delivery of BMP-2 and BMP-6 for Bone Tissue Engineering

The release of growth factors from tissue engineering scaffolds provides signals that influence the migration, differentiation, and proliferation of cells. The incorporation of a drug delivery platform that is capable of tunable release will give tissue engineers greater versatility in the direction of tissue regeneration. We have prepared a novel composite of two biomaterials with proven track records - apatite and poly(lactic-co-glycolic acid) (PLGA) – as a drug delivery platform with promising controlled release properties. These composites have been tested in the delivery of a model protein, bovine serum albumin (BSA), as well as therapeutic proteins, recombinant human bone morphogenetic protein-2 (rhBMP-2) and rhBMP-6. The controlled release strategy is based on the use of a polymer with acidic degradation products to control the dissolution of the basic apatitic component, resulting in protein release. Therefore, any parameter that affects either polymer degradation or apatite dissolution can be used to control protein release. We have modified the protein release profile systematically by varying the polymer molecular weight, polymer hydrophobicity, apatite loading, apatite particle size, and other material and processing parameters. Biologically active rhBMP-2 was released from these composite microparticles over 100 days, in contrast to conventional collagen sponge carriers, which were depleted in approximately 2 weeks. The released rhBMP-2 was able to induce elevated alkaline phosphatase and osteocalcin expression in pluripotent murine embryonic fibroblasts. To augment tissue engineering scaffolds with tunable and sustained protein release capabilities, these composite microparticles can be dispersed in the scaffolds in different combinations to obtain a superposition of the release profiles. We have loaded rhBMP-2 into composite microparticles with a fast release profile, and rhBMP-6 into slow-releasing composite microparticles. An equi-mixture of these two sets of composite particles was then injected into a collagen sponge, allowing for dual release of the proteins from the collagenous scaffold. The ability of these BMP-loaded scaffolds to induce osteoblastic differentiation in vitro and ectopic bone formation in a rat model is being investigated. We anticipate that these apatite-polymer composite microparticles can be extended to the delivery of other signalling molecules, and can be incorporated into other types of tissue engineering scaffolds.

Apatite-Polymer Composite Particles for Controlled Delivery of BMP-2: In Vitro Release and Cellular Response

Bone morphogenetic protein-2 (BMP-2) has the ability to induce osteoblast differentiation of undifferentiated cells, resulting in the healing of skeletal defects when delivered with a suitable carrier. We have applied a versatile delivery platform comprising a novel composite of two biomaterials with proven track records – apatite and poly(lactic-co-glycolic acid) (PLGA) – to the delivery of BMP-2. Sustained release of this growth factor was tuned with variables that affect polymer degradation and/or apatite dissolution, such as polymer molecular weight, polymer composition, apatite loading, and apatite particle size. The effect of released BMP-2 on C3H10T1/2 murine pluripotent mesenchymal cells was assessed by tracking the expression of osteoblastic makers, alkaline phosphatase (ALP) and osteocalcin. Release media collected over 100 days induced elevated ALP activity in C3H10T1/2 cells. The expression of osteocalcin was also upregulated significantly. These results demonstrated the potential of apatite-PLGA composite particles for releasing protein in bioactive form over extended periods of time.

Targeted Stimuli-Responsive Dextran Conjugates for Doxorubicin Delivery to Hepatocytes

A targeted, stimuli-responsive, polymeric drug delivery vehicle is being developed in our lab to help alleviate severe side-effects caused by narrow therapeutic window drugs. Targeting specific cell types or organs via proteins, specifically, lectin-mediated targeting holds potential due to the high specificity and affinity of receptor-ligand interactions, rapid internalization, and relative ease of processing. Dextran, a commercially available, biodegradable polymer has been conjugated to doxorubicin and galactosamine to target hepatocytes in a three-step, one-pot synthesis. The loading of doxorubicin and galactose on the conjugates was determined by absorbance at 485 nm and elemental analysis, respectively. Conjugation efficiency based on the amount loaded of each reactant varies from 20% to 50% for doxorubicin and from 2% to 20% for galactosamine. Doxorubicin has also been attached to dextran through an acid-labile hydrazide bond. Doxorubicin acts by intercalating with DNA in the nuclei of cells. The fluorescence of doxorubicin is quenched when it binds to DNA. This allows a fluorescence-based cell-free assay to evaluate the efficacy of the polymer conjugates where we measure the fluorescence of doxorubicin and the conjugates in increasing concentrations of calf thymus DNA. Fluorescence quenching indicates that our conjugates can bind to DNA. The degree of binding increases with polymer molecular weight and substitution of doxorubicin. In cell culture experiments with hepatocytes, the relative uptake of polymer conjugates was evaluated using flow cytometry, and the killing efficiency was determined using the MTT cell proliferation assay. We have found that conjugate uptake is much lower than that of free doxorubicin. Lower uptake of conjugates may increase the maximum dose of drug tolerated by the body. Also, non-galactosylated conjugate uptake is lower than that of the galactosylated conjugate. Microscopy indicates that doxorubicin localizes almost exclusively at the nucleus, whereas the conjugates are present throughout the cell. Doxorubicin linked to dextran through a hydrazide bond was used to achieve improved killing efficiency. Following uptake, the doxorubicin dissociates from the polymer in an endosomal compartment and diffuses to the nucleus. The LC₅₀ of covalently linked doxorubicin is 7.4 μg/mL, whereas that of hydrazide linked doxorubicin is 4.4 μg/mL.