Menezesite, the first natural heteropolyniobate, from Cajati, Sao Paulo, Brazil: Description and crystal structure

Menezesite, ideally Ba2MgZr4(BaNb12O42)center dot 12H(2)O, occurs as a vug mineral in the contact zone between dolomite carbonatite and ""jacupirangite"" (=a pyroxenite) at the Jacupiranga mine, in Cajati county, Sao Paulo state, Brazil, associated with dolomite, calcite, magnetite, clinohumite, phlogopite, ancylite-(Ce), strontianite, pyrite, and tochilinite. This is also the type locality for quintinite-2H. The mineral forms rhombododecahedra up to I mm, isolated or in aggregates. Menezesite is transparent and displays a vitreous luster; it is reddish brown with a white streak. It is non-fluorescent. Mohs hardness is about 4. Calculated density derived from the empirical formula is 4.181 g/cm(3). It is isotropic, 1.93(1) (white light); n(calc) = 2.034. Menezesite exhibits weak anomalous birefringence. The empirical formula is (Ba1.47K0.53Ca0.3,Ce0.17Nd0.10Na0.06La0.02)(Sigma 2.66)(Mg0.94Mn0.23Fe0.23Al0.03)(Sigma 1.43)(Zr2.75Ti0.96Th0.29)(Sigma 4.00)[(Ba0.72Th0.26U0.02)(Sigma 1.00)(Nb9.23Ti2.29Ta0.36Si0.12)Sigma O-12.00(42)]center dot 12H(2)O. The mineral is cubic, space group 10 (204), a = 13.017(1) angstrom, V = 2206(1) angstrom(3), Z = 2. Menezesite is isostructural with the synthetic compound Mg-7[MgW12O42](OH)(4)center dot 8H(2)O. The mineral was named in honor of Luiz Alberto Dias Menezes Filho (born 1950), mining engineer, mineral collector and merchant. Both the description and the name were approved by the CNMMN-IMA (Nomenclature Proposal 2005-023). Menezesite is the first natural heteropolyniobate. Heteropolyanions have been employed in a range of applications that include virus-binding inorganic drugs (including the AIDs virus), homogeneous and heterogeneous catalysts, electro-optic and electrochromic materials, metal and protein binding, and as building blocks for nanostructuring of materials.

THE CRYSTAL STRUCTURE OF A MICROLITE-GROUP MINERAL WITH A FORMULA NEAR NaCaTa(2)O(6)F FROM THE MORRO REDONDO MINE, CORONEL MURTA, MINAS GERAIS, BRAZIL

We present electron-microprobe and single-crystal X-ray-diffraction data for a microlite-group mineral with a formula near NaCaTa(2)O(6)F from the Morro Redondo mine, Coronel Murta, Minas Gerais, Brazil. On the basis of these data, the formula is A(Na(0.88)Ca(0.88)Pb(0.02)square(0.22))(Sigma 2.00) (B)(Ta(1.70)Nb(0.14)Si(0.12)As(0.04))(Sigma 2.00) (X)[(O(5.75)(OH)(0.25)](Sigma 6.00) (Y)(F(0.73)square(0.27))(Sigma 1.00). According to the new nomenclature for the pyrochlore-supergroup minerals, it is intermediate between fluornatromicrolite and "" fluorcalciomicrolite"". The crystal structure, F (d3) over barm, a = 10.4396(12) angstrom, has been refined to an R(1) value of 0.0258 (wR(2) = 0.0715) for 107 reflections (MoK alpha radiation). There is a scarcity of crystal-chemical data for pyrochlore-supergroup minerals in the literature. A compilation of these data is presented here.

Physical Vapor Deposited Thin Films of Lignins Extracted from Sugar Cane Bagasse: Morphology, Electrical Properties, and Sensing Applications

The concern related to the environmental degradation and to the exhaustion of natural resources has induced the research on biodegradable materials obtained from renewable sources, which involves fundamental properties and general application. In this context, we have fabricated thin films of lignins, which were extracted from sugar cane bagasse via modified organosolv process using ethanol as organic solvent. The films were made using the vacuum thermal evaporation technique (PVD, physical vapor deposition) grown up to 120 nm. The main objective was to explore basic properties such as electrical and surface morphology and the sensing performance of these lignins as transducers. The PVD film growth was monitored via ultraviolet-visible (UV-vis) absorption spectroscopy and quartz crystal microbalance, revealing a linear relationship between absorbance and film thickness. The 120 nm lignin PVD film morphology presented small aggregates spread all over the film surface on the nanometer scale (atomic force microscopy, AFM) and homogeneous on the micrometer scale (optical microscopy). The PVD films were deposited onto Au interdigitated electrode (IDE) for both electrical characterization and sensing experiments. In the case of electrical characterization, current versus voltage (I vs V) dc measurements were carried out for the Au IDE coated with 120 nm lignin PVD film, leading to a conductivity of 3.6 x 10(-10) S/m. Using impedance spectroscopy, also for the Au IDE coated with the 120 nm lignin PVD film, dielectric constant of 8.0, tan delta of 3.9 x 10(-3)) and conductivity of 1.75 x 10(-9) S/m were calculated at 1 kHz. As a proof-of-principle, the application of these lignins as transducers in sensing devices was monitored by both impedance spectroscopy (capacitance vs frequency) and I versus time dc measurements toward aniline vapor (saturated atmosphere). The electrical responses showed that the sensing units are sensible to aniline vapor with the process being reversible. AFM images conducted directly onto the sensing units (Au IDE coated with 120 nm lignin PVD film) before and after the sensing experiments showed a decrease in the PVD film roughness from 5.8 to 3.2 nm after exposing to aniline.

Deposition of selenium thin layers on gold surfaces from sulphuric acid media: Studies using electrochemical quartz crystal microbalance, cyclic voltammetry and AFM

In this paper we report here new considerations about the relationship between the mass and charge variations (m/z relationship) in underpotential deposition (UPD), bulk deposition and also in the H(2)Se formation reaction. Nanogravimetric experiments were able to show the adsorption of H(2)SeO(3) on the AuO surface prior to the voltammetric sweep and that, after the AuO reduction, 0.40 monolayer of H(2)SeO(3) remains adsorbed on the newly reduced Au surface, which was enough to gives rise to the UPD layer. The UPD results indicate that the maximum coverage with Se(ads) on polycrystalline gold surface corresponds to approximately 0.40 monolayer, in good agreement with charge density results. The cyclic voltammetry experiments demonstrated that the amount of bulk Se obtained during the potential scan to approximately 2 Se monolayers, which was further confirmed by electrochemical quartz crystal microbalance (EQCM) measurements that pointed out a mass variation corresponding of 3 monolayers of Se. In addition, the Se thin films were obtained by chronoamperometric experiments, where the Au electrode was polarized at +0.10V during different times in 1.0 M H(2)SO(4) + 1.0 mM SeO(2). The topologic aspects of the electrodeposits were observed in Atomic Force Microscope (AFM) measurements. Finally, in highly negative potential polarizations, the H(2)Se formation was analyzed by voltammetric and nanogravimetric measurements. These finding brings a new light on the selenium electrodeposition and point up to a proposed electrochemical model for molecule controlled surface engineering. (c) 2009 Elsevier Ltd. All rights reserved.

Employment Protection Legislation and Firm Growth : Evidence from a Natural Experiment

A natural experiment is used to identify the causal relationship between employment protection legislation and fi…rm growth. The natural experiment occurred in Sweden in 2001, when an exemption made it possible for fi…rms with less than eleven employees to exclude two workers from the last-in-fi…rst-out principle when dismissing personnel. The estimated average treatment effect of the reform show that the number of employees increased with 0.135 percent in fi…rms with 5-9 employees relative to fi…rms with 10-15 employees, which corresponds to over 5,000 additional jobs per year created by the reform. Firms with ten employees, just below the size threshold, became 3.4 percent less likely to increase their workforce to a level surpassing the threshold, indicating that the last-in-…first-out rule prevented these …firms from growing. Thus, employment protection legislation seems to act as a growth barrier for small fi…rms.

Population structure and growth of the hermit crab Pagurus brevidacylus (Anomura : Paguridae) from the northern coast of São Paulo, Brazil

The hermit crab Paguras brevidactylus (Crustacea: Anomura: Paguridea) from the infralittoral area of Anchieta Island, Ubatuba, was characterized by population Structure (size, sex ratio, reproduction and recruitment) and growth. Animals were collected monthly during 1999 by SCUBA diving. A total of 1525 individuals was collected (633 males and 892 females), 695 of them were ovigerous females. Overall sex ratio was 0.7:1 in favour of females. The crabs showed a unimodal distribution with males significantly larger than females. Ovigerous females were collected during all months and in high percentages from 1.0 mm of shield length, demonstrating intense and Continuous reproduction. The longevity was approximately 24 months for males and 18 for females, which showed larger growth rate and reached sexual maturity earlier (two months) than males. The low number of males in this Population may be due to the longer life span. Moreover, the sexual dimorphism favours males during the intra- and interspecific fights by shell, food, reproduction and territory. Females demonstrated a short life cycle and intense reproduction.

Crystal structure of Bn IV in complex with myristic acid: A Lys49 myotoxic phospholipase A(2) from Bothrops neuwiedi venom

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Maturation and growth curves of Macrobrachium Carcinus (Linnaeus) (Crustacea, Decapoda, Palaemonidae) from Ribeira de Iguape River, southern Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Growth and antimicrobial activity of lactic acid bacteria from rumen fluid according to energy or nitrogen source

Objetivou-se avaliar os efeitos da suplementação com diferentes fontes de energia e de compostos nitrogenados sobre o crescimento e produção de bacteriocinas de bactérias ácido-láticas in vitro. As incubações foram conduzidas utilizando-se fluido ruminal originado de um novilho Holandês-Zebu fistulado no rúmen. O animal foi mantido em pastagem de Brachiaria decumbens recebendo 200 g/dia de proteína bruta suplementar. Os substratos e o inóculo foram acondicionados em frascos de vidro considerando-se oito tratamentos: celulose, celulose e caseína, celulose e peptona de soja, celulose e ureia, amido, amido e caseína, amido e peptona de soja e amido e ureia. Incubações sucessivas foram conduzidas para seleção dos microrganismos em função das fontes energéticas e de compostos nitrogenados. O amido favoreceu o crescimento de bactérias ácido-láticas em comparação à celulose. A suplementação com proteína verdadeira (peptona de soja e caseína) estimulou o crescimento dessas bactérias em comparação ao controle (sem suplementação com compostos nitrogenados). A adição de ureia não estimulou o crescimento de bactérias ácido-láticas. Nenhuma atividade antimicrobiana foi detectada a partir das colônias de bactérias ácido-láticas isoladas. Fontes de proteína verdadeira incrementam a competição entre bactérias fermentadoras de carboidratos estruturais e não-estruturais.

Growth regulator losses from cotton plants due to rainfall

Reguladores de crescimento aplicados às plantas de algodoeiro (Gossypium hirsutum L.) podem ser lavados em função da ocorrência de chuvas. Chuvas que ocorrem próximas à época de aplicação podem ocasionar elevada perda e necessidade de reaplicação dos produtos visando à taxa de crescimento desejada. Avaliou-se o efeito do intervalo de tempo entre a ocorrência de chuva simulada e a aplicação de cloreto de mepiquat e cloreto de chlormequat no algodoeiro no crescimento das plantas, além de estimar a necessidade de reaplicação dos reguladores. Plantas de algodão foram cultivadas em vasos de 12 L que permaneceram em casa de vegetação. Os reguladores de crescimento foram aplicados 40 dias após a emergência, quando 50% das plantas apresentavam botão floral. A chuva foi simulada 1, 2, 4, 6 e 24 horas após a aplicação dos reguladores. Determinou-se a altura das plantas antes da aplicação dos produtos e a cada 3 dias até o 30º dia. Na colheita, foi avaliado o número de ramos e estruturas reprodutivas, com posterior determinação da massa da matéria seca. Também foi determinado o crescimento acumulado e taxa de crescimento das plantas. Os dois reguladores reduziram a massa da matéria seca das plantas, independente do intervalo para ocorrência da chuva. O crescimento excessivo das plantas foi controlado, porém, com eficiência reduzida quanto menor o intervalo para simulação de chuva. em todos os períodos avaliados houve perda de produtos, com necessidade de reaplicação. A taxa de reaplicação de cloreto de mepiquat para os diferentes intervalos de chuva foi, em média, 17% maior.

Evaluation of harvested mushrooms and viability of Agaricus bisporus growth using casing materials made from spent mushroom substrate

P>The present work evaluates of harvested mushroom and viability of Agaricus bisporus growth in several casing materials based on spent mushroom substrate. The experiment consisted of eight casing layer, which six were made with spent mushroom substrate. The results confirm the usefulness of reincorporating the spent substrate in new cultivation cycles as an ingredient of casing mixtures. In general, biological efficiency was high, three of the SMS based-casings surpassing the threshold value of 100 kg 100 kg-1 of compost. The high electrical conductivity of mixtures containing a large proportion of spent substrate limits the extent to which it can be used, although mixing it with other materials (such as peat) reduces these values to acceptable levels. In short, it makes economic and environmental sense to reuse spent mushroom substrate as an ingredient of alternative casing materials.

Structural and functional leaf traits of two Gochnatia species from distinct growth forms in a sclerophyll forest site in Southeastern Brazil

O gênero Gochnatia é comumente encontrado em diferentes fitofisionomias do Cerrado do Estado de São Paulo, crescendo desde ambientes mais abertos até áreas florestais mais fechadas. Aqui foram comparadas a anatomia foliar e alguns parâmetros ecofisiológicos de duas espécies do gênero Gochnatia, uma arbustiva (Gochnatia barrosii Cabrera) e a outra arbórea (Gochnatia polymorpha (Less.) Cabrera), ambas ocorrendo em área de cerradão na Estação Ecológica de Assis, SP. Encontraram-se diferenças estruturais qualitativas entre as espécies, com G. barrosii apresentando folhas anfiestomáticas, com epiderme unisseriada e G. polymorpha apresentando folhas hipoestomáticas, com epiderme múltipla ou hipoderme, na face adaxial. Além disso, as folhas de G. barrosii apresentaram menores valores para a espessura dos tecidos (com exceção da epiderme na face abaxial) e da folha em relação a G. polymorpha. Foram observadas diferenças na assimilação de CO2 tanto em base de área quanto de massa seca foliar, além de diferenças na área foliar específica, sendo esta maior em G. barrosii. Apesar das folhas de G. barrosii possuírem estrutura bem menos escleromorfa do que as folhas de G. polymorpha, não foram encontradas diferenças na eficiência do uso de água. Os resultados sugerem que espécies de formas distintas de crescimento de um mesmo gênero possuem características foliares diferenciadas para lidar com as variações ambientais a que são submetidas.

Allometric growth of two species of Ephemeroptera from Neotropical mountains streams

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)