952 resultados para Cone
Resumo:
Fractured oil and gas reservoir is an important type of oil and gas reservoir, which is taking a growing part of current oil and gas production in the whole world. Thus these technologies targeted at exploration of fractured oil and gas reservoirs are drawing vast attentions. It is difficult to accurately predict the fracture development orientation and intensity in oil and gas exploration. Focused on this problem, this paper systematically conducted series study of seismic data processing and P-wave attributes fracture detection based on the structure of ZX buried mountain, and obtained good results. This paper firstly stimulated the propagation of P-wave in weak anisotropic media caused by vertical aligned cracks, and analyzed the rule of P-wave attributes’ variation associated with observed azimuth, such as travel-time, amplitude and AVO gradient and so on, and quantitatively described the sensitive degree of these attributes to anisotropy of fracture medium. In order to further study the sensitive degree of these attributes to anisotropy of fractures, meanwhile, this paper stimulated P-wave propagation through different types and different intensity anisotropic medium respectively and summarized the rule of these attributes’ variation associated with observed azimuth in different anisotropic medium. The results of these studies provided reliable references for predicting orientation, extensity and size of actual complicated cracked medium by P-wave azimuth attributes responses. In the paper, amounts of seismic data processing methods are used to keep and recover all kinds of attributes applied for fracture detection, which guarantee the high accurate of these attributes, thus then improve the accurate of fracture detection. During seismic data processing, the paper adopted the three dimensional F-Kx-Ky field cone filter technique to attenuate ground roll waves and multiple waves, then enhances the S/N ratio of pre-stack seismic data; comprehensively applying geometrical spread compensation, surface consistent amplitude compensation, residual amplitude compensation to recover amplitude; common azimuth processing method effectively preserves the azimuthal characteristics of P-wave attributes; the technique of bend ray adaptive aperture pre-stack time migration insures to obtain the best image in each azimuth. Application of these processing methods guaranteed these attributes’ accuracy, and then improved the accuracy of fracture detection. After comparing and analyzing a variety of attributes, relative wave impedance (relative amplitude) attribute is selected to inverse the orientation of fracture medium; attenuation gradient and corresponding frequency of 85% energy are selected to inverse the intensity of fracture medium; then obtained the fracture distribution characteristics of lower Paleozoic and Precambrian in ZX ancient buried mountains. The results are good accord with the characteristics of faults system and well information in this area.
Resumo:
Jiyang & Changwei depressions are two neighboring depressions in Bahai Bay Basin, the famous oil rich basin in East China. The exploration activities in the past 40 years has proved that, within the basins, there exists not only plentiful sandstone hydrocarbon reservoirs (conventional), but also abundant special reservoirs as igneous rock, mudstone and conglomerate ones which have been knowing as the unconventional in the past, and with the prospecting activity is getting more and more detailed, the unconventional reservoirs are also getting more and more important for further resources, among which, the igneous lithological reservoir be of significance as a new research and exploration area. The purpose of this paper is, with the historical researches and data as base, the System Theory, Practice Theory and Modern Comprehensive Petroleum Geology Theory as guide, the theoretical and practice break through as the goal, and the existing problems in the past as the break through direction, to explore and establish a valid reservoir formation and distribution models for igneous strata in the profile of the eastern faulted basins. After investigating the distribution of the igneous rocks and review the history of the igneous rocks reservoirs in basins, the author focused on the following issues and correspondingly the following progresses have been made: 1.Come to a new basin evolution and structure model named "Combined-Basin-bodies Model" for Jiyang even Eastern faulted basins based on the study on the origin and evolution of Jiyang & Changwei basins, depending on this model, every faulted basin in the Bo-hai Bay Basin is consisted of three Basin-Bodies including the Lower (Mesozoic), Middle (Early Tertiary) and the Upper (Late Tertiary) Bodies, each evolved in different geo-stress setting and with different basin trend, shape and igneous-sedimentary buildings system, and from this one to next one, the basin experienced a kind of process named "shape changing" and "Style changing". 2. Supposed a serious of new realizations as follows (1) There were "multi-level magma sources" including Upper mantel and the Lower, Middle and even the Upper Shell magma Chambers in the historical Magma Processes in the basins; (2) There were "multi-magma accessing or pass" from the first level (Mantel faults) to the second, third and fourth levels (that is the different levels of fault in the basin sediment strata) worked in the geo-historical and magma processes; (3) Three tectonic magma cycles and more periods have been recognized those are matched with the "Basin -body-Model" and (4)The geo-historical magma processes were non-homogeneous in time and space scale and so the magma rocks distributed in "zones" or "belts". 3. The study of magma process's effect on basin petroleum conditions have been made and the following new conclusions were reached: (1) the eruptive rocks were tend to be matched with the "caped source rock", and the magma process were favorable to the maturing of the source rocks. (2) The magma process were fruitful to the accumulation of the non-hydrocarbon reservoirs however a over magma process may damage the grade of resource rock; (3) Eruptive activity provided a fruitful environment for the formation of such new reservoir rocks as "co-eruptive turbidity sandstones" and "thermal water carbonate rocks" and the intrusive process can lead to the origin of "metamorphism rock reservoir"; (4) even if the intrusive process may cause the cap rock broken, the late Tertiary intrusive rocks may indeed provide the lateral seal and act as the cap rock locally even regionally. All above progresses are valuable for reconstructing the magma-sedimentary process history and enriching the theory system of modem petroleum geology. 4. A systematic classification system has been provided and the dominating factors for the origin and distribution of igneous rock reservoirs have been worked out based on the systematic case studies, which are as follows: (1) The classification is given based on multi-factors as the origin type, litho-phase, type of reservoir pore, reservoir ability etc., (2) Each type of reservoir was characterized in a detailed way; (3) There are 7 factors dominated the intrusive reservoir's characteristics including depth of intrusion, litho-facies of surrounding rocks, thickness of intrusive rock, intrusive facies, frequency and size of the working faults, shape and tectonic deformation of rock, erosion strength of the rock and the time of the intrusion ect., in the contrast, 4 factors are for eruptive rocks as volcanic facies, frequency and size of the working faults, strength of erosion and the thermal water processing. 5. Several new concept including "reservoir litho-facies", "composite-volcanic facies" and "reservoir system" ect. Were suggested, based on which the following models were established: (1) A seven reservoir belts model for a intrusive unit profile and further more, (2) a three layers cubic model consisted of three layer as "metamorphic roe layer", "marginal layer" and "the core"; (3) A five zones vertical reservoir sequence model consisted of five litho-facies named A, B, C, D and E for a original lava unit and furthermore three models respectively for a erosion, subsidence and faulted lava unit; (4) A composite volcanic face model for a lava cone or a composite cone that is consisted of three facies as "crater and nearby face", "middle slope" and "far slope", among which, the middle slope face is the most potential reservoir area and producible for oil & gas. 6. The concept of "igneous reservoir" was redefined as the igneous, and then a new concept of "igneous reservoir system" was supposed which means the reservoir system consisted of igneous and associated non-igneous reservoirs, with non-hydrocarbon reservoir included. 7. The origin and distribution of igneous reservoir system were probed and generalized for the exploration applications, and origin models of the main reservoir sub-systems have been established including those of igneous, related non-igneous and non-hydrocarbon. For intrusive rocks, two reservoir formation models have been suggested, one is called "Original or Primary Model", and the another one is "Secondary Model"; Similarly, the eruptive rock reservoirs were divided in three types including "Highly Produced", "Moderately Produced" and "Lowly Produced" and accordingly their formation models were given off; the related non-igneous reservoir system was considered combination of eight reservoirs, among which some ones like the Above Anticline Trap are highly produced; Also, the non-hydrocarbon. Trap system including five kinds of traps was discussed. 8. The concept models for four reservoir systems were suggested, which include the intrusive system consisted of 7 kinds of traps, the land eruptive system with 6 traps, the under water eruptive system including 6 kinds of traps and the non-hydrocarbon system combined by 5 kinds of traps. In this part, the techniques for exploration of igneous reservoir system were also generalized and probed, and based on which and the geological progresses of this paper, the potential resources and distributions of every reservoir system was evaluated and about 186 millions of reserves and eight most potential non-hydrocarbon areas were predicted and outlined. The author believe that the igneous reservoir system is a very important exploration area and its study is only in its early stage, the framework of this paper should be filled with more detailed studies, and only along way, the exploration of igneous reservoir system can go into it's really effective stage.
Resumo:
Since 1970s, igneous reservoirs such as Shang741, Bin674 and Luol51 have been found in Jiyang depression, which are enrichment and heavy-producing. Showing good prospect of exploration and development, igneous reservoirs have been the main part of increasing reserves and production in Shengli oilfield. As fracture igneous reservoir being an extraordinary complex concealed reservoir and showing heavy heterogeneity in spatial distribution, the study of recognition, prediction, formation mechanism and the law of distribution of fracture is essential to develop the reservoir. Guided by multiple discipline theory such as sedimentology, geophysics, mineralogy, petroleum geology, structural geology and reservoir engineering, a set of theories and methods of recognition and prediction of fractured igneous rock reservoir are formed in this paper. Rock data, three-dimensional seismic data, log data, borehole log data, testing data and production data are combined in these methods by the means of computer. Based on the research of igneous rock petrography and reservoir formation mechanism, emphasized on the assessment and forecast of igneous rock reservoir, aimed at establishing a nonhomogeneity quantification model of fractured igneous rock reservoir, the creativity on the fracture recognition, prediction and formation mechanism are achieved. The research result is applied to Jiyang depression, suggestion of exploration and development for fractured igneous rock reservoir is supplied and some great achievement and favourable economic effect are achieved. The main achievements are gained as follows: 1. The main facies models of igneous rock reservoir in JiYang depression are summarized. Based on data and techniques of seism, well log and logging,started from the research of single well rock facies, proceeded by seismic and log facies research, from point to line and line to face, the regional igneous facies models are established. And hypabyssal intrusion allgovite facies model, explosion volcaniclastic rock facies model and overfall basaltic rocks facies model are the main facies models of igneous rock reservoir in JiYang depression. 2. Four nonhomogenous reservoir models of igneous reservoirs are established, which is the base of fracture prediction and recognition. According to characteristics of igneous petrology and spatial types of reservoir, igneous reservoirs of Jiyang depression are divided into four categories: fractured irruptive rock reservoir, fracture-pore thermocontact metamorphic rock and irruptive rock compound reservoir, pore volcanic debris cone reservoir and fracture-pore overfall basaltic rock reservoir. The spatial distribution of each model's reservoir has its features. And reservoirs can be divided into primary ones and secondary ones, whose mechanism of formation and laws of distribution are studied in this paper. 3. Eight geologic factors which dominate igneous reservoirs are presented. The eight geologic factors which dominates igneous reservoirs are igneous facies, epigenetic tectonics deformation, fracture motion, intensity of intrusive effect and adjoining-rock characters, thermo-contact metamorphic rock facies, specific volcano-tectonic position, magmatic cyclicity and epigenetic diagenetic evolution. The interaction of the eight factors forms the four types nonhomogenous reservoir models of igneous reservoirs in Jiyang depression. And igneous facies and fracture motion are the most important and primary factors. 4. Identification patterns of seismic, well log and logging facies of igneous rocks are established. Igneous rocks of Jiyang depression show typical reflecting features on seismic profile. Tabular reflection seismic facies, arc reflection seismic facies and hummocky or mushroom reflection seismic facies are the three main facies. Logging response features of basic basalt and diabase are shown as typical "three low and two high", which means low natural gamma value, low interval transit-time, low neutron porosity, high resistivity and high density. Volcaniclastic rocks show "two high and three low"-high neutron porosity, high interval transit-time, low density, low-resistance and low natural gamma value. Thermo-contact metamorphic rocks surrounding to diabase show "four high and two low" on log data, which is high natural gamma value, high self-potential anomaly, high neutron porosity, high interval transit-time and low density and low-resistance. Based on seismic, well log and logging data, spatial shape of Shang 741 igneous rock is described. 5. The methods of fracture prediction and recognition for fractured igneous reservoir are summarized. Adopting FMI image log and nuclear magnetic resonance log to quantitative analysis of fractured igneous reservoir and according to formation mechanism and shape of fracture, various fractures are recognized, such as high-angle fracture, low-angle fracture, vertical fracture, reticulated fracture, induced fracture, infilling fracture and corrosion vug. Shang 741 intrusive rock reservoir can be divided into pore-vug compound type, pore fracture type, micro-pore and micro-fracture type. Physical properties parameters of the reservoir are computed and single-well fracture model and reservoir parameters model are established. 6. Various comprehensive methods of fracture prediction and recognition for fractured igneous reservoir are put forward. Adopting three-element (igneous facies, fracture motion and rock bending) geologic comprehensive reservoir evaluation technique and deep-shallow unconventional laterolog constrained inversion technique, lateral prediction of fractured reservoir such as Shang 741 is taken and nonhomogeneity quantification models of reservoirs are established.
Resumo:
In the engineering reinforcement of-rock and soil mass, engineers must consider how to obtain better reinforcing effect at the cost of less reinforcing expense, which, in fact, is the aim of reinforcement design. In order to accomplish the purpose, they require not only researching the material used to reinforce and its structure, but also taking into account of several important geological factors, such as the structure and property of rock and soil mass. How to improve the reinforcing effect according to engineering geomechanical principle at the respect of the reinforcement of engineering soil and rock mass is studied and discussed in this paper. The author studies the theory, technology and practice of geotechnical reinforcement based on engineering geomechanics, taking example for the soil treatment of Zhengzhou Airport, the effect analysis of reinforcement to the slope on the left bank of Wuqiangxi Hydropower Station and the reinforcing design of the No. 102 Landslide and unique sand-slide slope on the Sichuan-Tibet Highway. The paper is comprised of two parts for the convenience of discussion. In the first part, from the first chapter to the fifth chapter, trying to perform the relevant research and application at the viewpoint of soil mass engineering geomechanics, the author mainly discusses the study of reinforcing soft ground soil through dynamical consolidation and its application. Then, in the second part, from the sixth chapter to the eleventh chapter, the study of new technologies in the rock slope reinforcement and their application are discussed. The author finds that not only better reinforcing effect can be gained in the research where the principle and method of rock mass engineering geomechanics is adopted, but also new reinforcing technologies can be put forward. Zhengzhou Airport is an important one in central plains. It lies on Yellow River alluvial deposit and the structure of stratum is complex and heterogeneous. The area of airport is very large, which can result in differential settlement easily, damage of airport and aircraft accident, whereas, there are no similar experiences to dispose the foundation, so the foundation treatment become a principal problem. During the process of treatment, the method of dynamic compaction was adopted after compared with other methods using the theory of synthetic integration. Dynamic compaction is an important method to consolidate foundation, which was successfully used in the foundation of Zhengzhou Airport. For fill foundation, controlling the thickness of fill so as to make the foundation treatment can reach the design demand and optimum thickness of the fill is a difficult problem. Considering this problem, the author proposed a calculation method to evaluate the thickness of fill. The method can consider not only the self-settlement of fill but also the settlement of the ground surface under applied load so as to ensure the settlement occurred during the using period can satisfy the design demand. It is proved that the method is correct after using it to choose reasonable energy of dynamic compaction to treat foundation. At the same time, in order to examine the effect of dynamic compaction, many monitor methods were adopted in the test such as static loading test, modulus of resilience test, deep pore pressure -test, static cone penetration test and the variation of the pore volume measurement. Through the tests, the author summarized the discipline of the accumulation and dissipation of pore pressure in Yellow River alluvial deposit under the action of dynamic compaction, gave a correct division of the property change of silt and clay under dynamic compaction, determined the bearing capacity of foundation after treatment and weighted the reinforcing effect of dynamic consolidation from the variation of the soil particle in microcosmic and the parameter of soil mass' density. It can be considered that the compactness of soil is in proportion to the energy of dynamic compaction. This conclusion provided a reference to the research of the "Problem of Soil Structure-the Central Problem of Soil Mechanics in 21 Century ". It is also important to strengthen rock mass for water conservancy and electric power engineering. Slip-resistance pile and anchoring adit full of reinforced concrete are usually adopted in engineering experience to strengthen rock mass and very important for engineering. But there also some deficiency such as the weakest section can't be highlighted, the monitor is inconvenient and the diameter of pile and adit is very large etc. The author and his supervisor professor Yangzhifa invented prestressed slip-resistance pile and prestressed anchoring adit full of reinforced concrete, utilizing the advantage that the prestressed structure has better anti-tensile characteristic (this invention is to be published). These inventions overcome the disadvantages of general slip-resistance pile and anchoring adit full of reinforced concrete and have the functions of engineering prospecting, strengthening, drainage and monitor simultaneous, so they have better strengthened effect and be more convenient for monitor and more economical than traditional methods. Drainage is an important factor in treatments of rock mass and slop. In view of the traditional drainage method that drainage pore often be clogged so as to resulted in incident, professor Yangzhifa invented the method and setting of guide penetration by fiber bundle. It would take good effect to use it in prestressed slip-resistance pile and anchoring adit full of reinforced concrete. In this paper, the author took example for anchoring adit full of reinforced concrete used to strengthen Wuqiangxi left bank to simulate the strengthened effect after consolidated by prestressed slip-resistance pile, took example for 102 landslide occurred along Sichuan-Tibet highway to simulate the application of slip-resistance pile and the new technology of drainage. At the same time the author proposed the treatment method of flowing sand in Sichuan-Tibet highway, which will benefit the study on strengthening similar engineering. There are five novelties in the paper with the author's theoretical study and engineering practice: 1. Summarizing the role of pore water pressure accumulation and dissipation of the Yellow River alluvial and diluvial soil under the action of dynamical consolidation, which has instructive significance in the engineering construction under the analogical engineering geological conditions in the future. It has not been researched by the predecessors. 2. Putting forward the concept of density D in microcosmic based on the microcosmical structure study of the soil sample. Adopting D to weight the reinforcing effect of dynamic consolidation is considered to be appropriate by the means of comparing the D values of Zhengzhou Airport's ground soil before with after dynamically consolidating reinforcement, so a more convenient balancing method can be provided for engineering practice. 3. According to the deep research into the soil mass engineering geology, engineering rock and soil science, soil mechanics, as well as considerable field experiments, improving the consolidating method in airport construction, from the conventional method, which is dynamically compactmg original ground surface firstly, then filling soil and dynamically layer-consolidating or layer-compacting at last to the upgraded method, which is performing dynamical consolidation after filling soil to place totally at the extent of the certain earth-filling depth. The result of the dynamical consolidation not only complies with the specifications, but also reduces the soil treatment investment by 10 million RMB. 4. Proposing the method for calculating the height of the filled soil by the means of estimating the potential displacement produced in the original ground surface and the filled earth soil under the possible load, selecting the appropriate dynamically-compacting power and determining the virtual height of the filled earth soil. The method is proved to be effective and scientific. 5. According to the thought of Engineering Geomechanics Metal-Synthetic Methodology (EGMS), patenting two inventions (to the stage of roclamation, with Professor Yang Zhi-fa, the cooperative tutor, and etc.) in which multi-functions, engineering geological investigation, reinforcement, drainage and strength remedy, are integrated all over in one body at the viewpoint of the breakage mechanism of the rock slope.
Resumo:
There is a natural norm associated with a starting point of the homogeneous self-dual (HSD) embedding model for conic convex optimization. In this norm two measures of the HSD model’s behavior are precisely controlled independent of the problem instance: (i) the sizes of ε-optimal solutions, and (ii) the maximum distance of ε-optimal solutions to the boundary of the cone of the HSD variables. This norm is also useful in developing a stopping-rule theory for HSD-based interior-point methods such as SeDuMi. Under mild assumptions, we show that a standard stopping rule implicitly involves the sum of the sizes of the ε-optimal primal and dual solutions, as well as the size of the initial primal and dual infeasibility residuals. This theory suggests possible criteria for developing starting points for the homogeneous self-dual model that might improve the resulting solution time in practice
Resumo:
Redundant sensors are needed on a mobile robot so that the accuracy with which it perceives its surroundings can be increased. Sonar and infrared sensors are used here in tandem, each compensating for deficiencies in the other. The robot combines the data from both sensors to build a representation which is more accurate than if either sensor were used alone. Another representation, the curvature primal sketch, is extracted from this perceived workspace and is used as the input to two path planning programs: one based on configuration space and one based on a generalized cone formulation of free space.
Resumo:
Robots must successfully plan and execute tasks in the presence of uncertainty. Uncertainty arises from errors in modeling, sensing, and control. Planning in the presence of uncertainty constitutes one facet of the general motion planning problem in robotics. This problem is concerned with the automatic synthesis of motion strategies from high level task specification and geometric models of environments. In order to develop successful motion strategies, it is necessary to understand the effect of uncertainty on the geometry of object interactions. Object interactions, both static and dynamic, may be represented in geometrical terms. This thesis investigates geometrical tools for modeling and overcoming uncertainty. The thesis describes an algorithm for computing backprojections o desired task configurations. Task goals and motion states are specified in terms of a moving object's configuration space. Backprojections specify regions in configuration space from which particular motions are guaranteed to accomplish a desired task. The backprojection algorithm considers surfaces in configuration space that facilitate sliding towards the goal, while avoiding surfaces on which motions may prematurely halt. In executing a motion for a backprojection region, a plan executor must be able to recognize that a desired task has been accomplished. Since sensors are subject to uncertainty, recognition of task success is not always possible. The thesis considers the structure of backprojection regions and of task goals that ensures goal recognizability. The thesis also develops a representation of friction in configuration space, in terms of a friction cone analogous to the real space friction cone. The friction cone provides the backprojection algorithm with a geometrical tool for determining points at which motions may halt.
Personalização dos softwares HiperEditor e HiperNavegador para uso na Agência de Informação Embrapa.
Resumo:
Este trabalho descreve o desenvolvimento de uma versão personalizada dos softwares HiperEditor e HiperNavegador para uso no Gestor de Conteúdo da Agência de Informação Embrapa, visando atender aos novos requisitos dos usuários nesse sistema. As atualizações foram concebidas por meio do uso dos códigos-fonte dos softwares, da biblioteca JDK, do ambiente de desenvolvimento Eclipse e do sistema operacional Kubuntu. A nova versão do HiperEditor traz uma interface gráfica mais amigável e intuitiva, além de novas funcionalidades: alterar cor do texto ou de preenchimento do nó, ordenação semântica, inserir imagem de ícone ou miniatura ao nó e imprimir estrutura hierárquica. O HiperNavegador personalizado permite que as alterações realizadas em uma determinada estrutura hierárquica por meio do HiperEditor possam ser visualizadas.
Resumo:
The author of the article attempts to present the situation of comparative studies as a field of research and a way of thinking about the contemporary world on the basis of the analyses presented in Comparative Literature at a Crossroads? in the monographic issue of “Comparative Studies” 2006. Much attention is paid to the phenomenon of the crisis of comparative studies connected with a noticeable reluctance towards great theoretical models shared by many researchers, the extensiveness of the topic area and resulting methodological problems but also the fact that comparatists abandon the studies of other languages. This results in a need of searching for a satisfactory definition of this field of study, its scope of research and applicable research methods. Among the specific issues raised in the article there is, e.g. the case of world literature seen in the context of the classical contradiction between cultural hegemony and cultural pluralism. Moreover, an interesting review of the picture of the Polish culture from the perspective of postcolonial theories and intracultural differences is presented.
Resumo:
The article concerns the crucial role of language in the creation of the character’s identity. This issue is analysed by the author on the basis of the Russian writer Tatiana Tolstoj’s short stories. In the works of T. Tolstoj the idiosyncratic language of the character, full of surprising metaphors, repetitions and syntactic innovations creates the prose style named ornamental prose by H. Goscilo. According to the author of the article, the metaphor plays a special role in Tolstoj’s short stories. The short story becomes subordinate to one superior metaphor accompanied by a number of subsidiary metaphors. By means of applying the metaphor that transcendents the reality, Tolstoj’s realistic prose becomes deeply emotional and presents unexpected and unknown aspects of Russian reality.
Resumo:
The author analyses the theoretical and historical work of the Czech literary theoretician entitled “Citlivé město (eseje z mytopoetiky”), Praha 2006, ss. 416. Hodrova’s work is focused on the topic of the city as an architectural creation and a complicated social and cultural phenomenon. In the post-modern anthropological thought the city is the subject of interest as an area that defines the identity of the human being through urban notions. The historical model of Hodrova’s reflection is the Czech Prague seen through the eyes of writers, artists, architects but also through the European tradition of presenting the city. Ipso facto, the monograph that reconstructs the artistic means of presenting Prague transforms into a dispute in the area of social psychology, mythical studies and anthropology.
Resumo:
Autorka, stawiając pytanie o zasadność pojęcia Europy Środkowej, przypomina historię różnic poglądowych pomiędzy czeskimi a polskimi uczonymi na temat (nie)istnienia wspólnoty na tym terytorium: ci pierwsi w XIX wieku głosili ideę panslawizmu, w 30-tych latach XX wieku potrzebę syntezy kultur i literatur słowiańskich, a po II wojnie światowej przeciwstawiali słowiańskość Zachodowi, co wywoływało krytykę tych drugich. Stąd wynika odmienne rozumienie obszaru środkowoeuropejskiego – w Czechach przeważnie lokowanego w granicach Austro-Węgier, zaś w Polsce pojmowanego znacznie szerzej. Natomiast pewnego rodzaju spójny wyróżnik Europy Środkowej można znaleźć w literaturze, przytaczany bywa szczególnie gatunek powieści (np. Kafki, Haška, Musila, Gombrowicza), poprzedzony – jak przypomina autorka – polską gawędą i popularnym w Polsce szkicem fizjologicznym. Zawarty w nich element humoru, przeszedł w stadium satyry, a następnie groteski, tworząc dzięki temu niepowtarzalny odcień humoru środkowoeuropejskiego, często określanego jako drugi wyróżnik omawianego terytorium. Zdaniem autorki, środkowoeuropejska specyfika ściśle związana jest z kodem euroatlantyckim, a w tym właśnie kontekście zawsze powinna być rozpatrywana.
Resumo:
Autorka dokonuje krytycznej rekapitulacji wskazówek metodologicznych dotyczących pisania historii kina kobiet w anglojęzycznej literaturze przedmiotu, odnosząc je do specyfiki kinematografii środkowo- i wschodnioeuropejskiej. Projekt dyskursu historii kina kobiet wpisuje w postulaty ponowoczesnej historiografii i nowej humanistyki, poszukującej tradycji grup mniejszościowych oraz krytycznie odnoszącej się do historii tradycyjnej. Problematyka kina kobiet w dyskursie historii kina powinna, zdaniem autorki, objąć także doświadczenia edukacyjne i zawodowe kobiet, związki biografii zawodowej i prywatnej oraz publiczne i wyobrażone wizerunki reżyserek.
Resumo:
Tematem artykułu jest książka bezpośrednio nie zaliczana do literatury Holocaustu, wybitna powieść Życie i los, rosyjskiego pisarza i dziennikarza Wasilija Grossmana, który dziś uznawany jest za jednego z najważniejszych twórców rosyjskich XX wieku. Życie i los okazuje się przykładem ujęcia dramatu Shoah na tle wojny jako części wielkiej Historii poddanej szaleństwom ideologii i polityki nazistów oraz terroru i rosnącego z drugiej strony antysemityzmu w państwie bolszewickim. Jednocześnie Zagłada pozostaje w tym utworze przede wszystkim tragedią konkretnych osób, widziana w porządku pojedynczej ludzkiej egzystencji, która nie daje się nigdy całkowicie sprowadzić do tego, co bezosobowe i masowe. Indywidualna perspektywa humanizuje obraz historii, ale też i go podważa w jego ogólnych strukturach i narracjach. Artykuł opisuje elementy, które składają się na żydowski wątek utworu. Dla jego odczytania ważny okazuje się szerszy kontekst biografii Grossmana i historia powstania oraz wydania powieści Życie i los. Jak widać – rosyjski pisarz dokonał dwóch znaczących gestów w odniesieniu do problemu reprezentacji Zagłady: z jednej strony zwrócił się ku konwencjom literackim, wykorzystał epicki rozmach, kompozycję wielowątkową i panoramiczne ujęcia wraz z ich koncepcją realizmu, wehikularności słowa, a jednocześnie wyszedł poza estetyczne ramy tekstu literackiego, wprowadził elementy lirycznych opisów i autobiograficzne akcenty oraz podkreślił etyczny wymiar całości – jako formy pamięci o tych niezliczonych ofiarach nie tylko Zagłady, ale i każdego XX wiecznego totalitaryzmu.
Resumo:
W artykule został przeanalizowany dyskurs bałkański XX wieku z kolonialnego i postkolonialnego punktu widzenia. Pierwsza część przybliża geopolityczny stosunek do Bałkanów,The Balans in the Gaze of Western Travellers (2004) jako przykłady korygującego wobec istniejących dotychczas reprezentacji i wyobrażeń Bałkanów. skupia się jednak nie tylko na nazwie geograficznej Półwysep Bałkański, lecz przede wszystkim na figuratywnym i metaforycznym języku, bazującym na stereotypach i negatywnych „etykietkach” Bałkanów, takich jak: „beczka prochu”, obszar „zadawnionej nienawiści”, „zderzenie cywilizacji”, „strefa rozłamu”, europejskie „jądro ciemności”, „dzika Europa”, „jeszcze- nie” Europa. Ten stosunek opiera się na opozycji My-Oni z kolonialnego, punktu widzenia Zachodu. W drugiej części tekstu zostaje przeprowadzona analiza trzech utworów prozatorskich autorstwa wybitnych pisarzy z Bałkanów – chorwacki dyskurs literacki jest reprezentowany przez Miroslava Krležę w opowiadaniu W Dreźnie. Mister Wu San Pej interesuje się problemem serbsko-chorwackim (1924), serbski dyskurs przedstawia Ivo Andrić w opowiadaniu List z roku 1920 (1946), natomiast bośniacki – Nenad Veličković i jego powieść epistolarna Sahib. Impresje z depresji (2001). Te trzy dyskursy z różnych przełomowych dla Jugosławii okresów pokazują, że pisarze chętnie sięgali po figurę „Obcego”, by uwypuklić problemy związane z własną złożoną, często zwielokrotnioną tożsamością. Ostatnia część akcentuje nowe, postkolonialne podejście do problemu Bałkanów – uczestniczą w nim wybitni naukowcy pochodzący z tego regionu, którzy zrobili kariery w Europie Zachodniej i USA. W tej części zostają zaprezentowane trzy fundamentalne dla tego problemu książki – studium Marii Todorowej (Bułgarka) Imagining the Balkans (1997), monografia Vesny Bjelogrlić-Goldsworthy (Serbka) Inventing Ruritania: The Imperializm of the Imagination (1998) oraz antropologiczna książka Božidara Jezernika (Słoweniec) Wild Europe.