Osteogenesis-inducing calcium phosphate nanoparticle precursors applied to titanium surfaces

This study investigated the effects of the morphology and physicochemical properties of calcium phosphate (CaP) nanoparticles on osteogenesis. Two types of CaP nanoparticles were compared, namely amorphous calcium phosphate (ACP) nano-spheres (diameter: 9-13 nm) and poorly crystalline apatite (PCA) nano-needles (30-50 nm x 2-4 nm) that closely resemble bone apatite. CaP particles were spin-coated onto titanium discs and implants; they were evaluated in cultured mouse calvarial osteoblasts, as well as after implantation in rabbit femurs. A significant dependence of CaP coatings was observed in osteoblast-related gene expression (Runx2, Col1a1 and Spp1). Specifically, the PCA group presented an up-regulation of the osteospecific genes, while the ACP group suppressed the Runx2 and Col1a1 expression when compared to blank titanium substrates. Both the ACP and PCA groups presented a more than three-fold increase of calcium deposition, as suggested by Alizarin red staining. The removal torque results implied a slight tendency in favour of the PCA group. Different forms of CaP nanostructures presented different biologic differences; the obtained information can be used to optimize surface coatings on biomaterials. © 2013 IOP Publishing Ltd.

TiO2-Cu photocatalysts: A study on the long- and short-range chemical environment of the dopant

In this study, the short- and long-range chemical environments of Cu dopant in TiO2 photocatalyst have been investigated. The Cu-doped and undoped TiO2 specimens were prepared by the sol-gel approach employing CuSO4·5H2O and Ti(O-iPr)4 precursors and subjecting the dried gels to thermal treatment at 400 and 500 C. The photocatalytic activity, investigated by methylene blue degradation under sunlight irradiation, showed a significantly higher efficiency of Cu-doped samples than that of pure TiO2. The X-ray diffraction results showed the presence of anatase phase for samples prepared at 400 and 500 C. No crystalline CuSO4 phase was detected below 500 C. It was also found that doping decreases the crystallite size in the (004) and (101) directions. Infrared spectroscopy results indicated that the chemical environment of sulfate changes as a function of thermal treatment, and UV-vis spectra showed that the band gap decreases with thermal treatment and Cu doping, showing the lowest value for the 400 C sample. X-ray absorption fine structure measurements and analysis refinements revealed that even after thermal treatment and photocatalytic assays, the Cu2+ local order is similar to that of CuSO4, containing, however, oxygen vacancies. X-ray photoelectron spectroscopy data, limited to the near surface region of the catalyst, evidenced, besides CuSO4, the presence of Cu1+ and CuO phases, indicating the active role of Cu in the TiO2 lattice. © 2013 Springer Science+Business Media New York.

Titanium in Dentistry: Historical development, state of the art and future perspectives

Titanium is a metallic element known by several attractive characteristics, such as biocompatibility, excellent corrosion resistance and high mechanical resistance. It is widely used in Dentistry, with high success rates, providing a favorable biological response when in contact with live tissues. Therefore, the objective of this study was to describe the different uses of titanium in Dentistry, reviewing its historical development and discoursing about its state of art and future perspective of its utilization. A search in the MEDLINE/PubMed database was performed using the terms 'titanium', 'dentistry' and 'implants'. The title and abstract of articles were read, and after this first screening 20 articles were selected and their full-texts were downloaded. Additional text books and manual search of reference lists within selected articles were included. Correlated literature showed that titanium is the most used metal in Implantology for manufacturing osseointegrated implants and their systems, with a totally consolidated utilization. Moreover, titanium can be also employed in prosthodontics to obtain frameworks. However, problems related to its machining, casting, welding and ceramic application for dental prosthesis are still limiting its use. In Endodontics, titanium has been used in association to nickel for manufacturing rotatory instruments, providing a higher resistance to deformation. However, although the different possibilities of using titanium in modern Dentistry, its use for prostheses frameworks still needs technological improvements in order to surpass its limitations. © 2012 Indian Prosthodontic Society.

Nilpotency of the b ghost in the non-minimal pure spinor formalism

The b ghost in the non-minimal pure spinor formalism is not a fundamental field. It is based on a complicated chain of operators and proving its nilpotency is nontrivial. Chandia proved this property in arXiv:1008.1778, but with an assumption on the nonminimal variables that is not valid in general. In this work, the b ghost is demonstrated to be nilpotent without this assumption. © 2013 SISSA, Trieste, Italy.

Dynamical twisting and the b ghost in the pure spinor formalism

After adding an RNS-like fermionic vector ψ m to the pure spinor formalism, the non-minimal b ghost takes a simple form similar to the pure spinor BRST operator. The N=2 superconformal field theory generated by the b ghost and the BRST current can be interpreted as a dynamical twisting of the RNS formalism where the choice of which spin 1/2 ψ m variables are twisted into spin 0 and spin 1 variables is determined by the pure spinor variables that parameterize the coset SO(10)/U(5). © 2013 SISSA, Trieste, Italy.

Cohomology ring of the brst operator associated to the sum of two pure spinors

In the study of the Type II superstring, it is useful to consider the BRST complex associated to the sum of two pure spinors. The cohomology of this complex is an infinite-dimensional vector space. It is also a finite-dimensional algebra over the algebra of functions of a single pure spinor. In this paper we study the multiplicative structure. © 2013 World Scientific Publishing Company.

Peircean semiotics and subject indexing: Contributions of speculative grammar and pure logic

The semiotics of C S. Peirce presents fundamental concepts to discover aspects of the indexing process, including representation and classes of signs. However, we still know little of its theoretical potential for subject indexing. We believe that the main difficulty in the proposals to understand the process of subject indexing based on Peircean semiotics stems from an incomplete interpretation of his semiotic system. This paper attempts to describe the contributions of Peircean semiotics to subject indexing. First, we analyze some of the concepts of the branches of semiotics, after which, we discuss strategies for conceptual approximation. Secondly, and aiming to raise the level of interlocution between the areas, we intend to argue that subject indexing is an inferential process, as explained by the second branch of semiotics. Thus, we seek to go beyond the level of speculative grammar, the first branch of semiotics, to forge a closer link with pure or critical logic, the second branch. We conclude that the indexer's work does not produce a mere reflection of what already exists in documents, but involves an instigating action to discover, through the inferential matrix, the meaning of a text in order to find the subject and the most appropriate subject added entry to the information system.

Notes on the pure spinor b ghost

In this work, a particular BRST-exact class of deformations of the b ghost in the non-minimal pure spinor formalism is investigated and the impact of this construction in the N= 2 ĉ = 3 topological string algebra is analysed. As an example, a subclass of deformations is explicitly shown, where the U (1) current appears in a conventional form, involving only the ghost number currents. Furthermore, a c ghost like composite field is introduced, but with an unusual construction. © 2013 SISSA, Trieste, Italy.

Biochemical responses in armored catfish (Pterygoplichthys anisitsi) after short-term exposure to diesel oil, pure biodiesel and biodiesel blends

Biodiesel fuel is gradually replacing petroleum-based diesel oil use. Despite the biodiesel being considered friendlier to the environment, little is known about its effects in aquatic organisms. In this work we evaluated whether biodiesel exposure can affect oxidative stress parameters and biotransformation enzymes in armored catfish (Pterygoplichthys anisitsi, Loricariidae), a South American endemic species. Thus, fish were exposed for 2 and 7d to 0.01mLL-1 and 0.1mLL-1 of pure diesel, pure biodiesel (B100) and blends of diesel with 5% (B5) and 20% (B20) biodiesel. Lipid peroxidation (malondialdehyde) levels and the activities of the enzymes glutathione S-transferase, superoxide dismutase, catalase and glutathione peroxidase were measured in liver and gills. Also, DNA damage (8-oxo-7, 8-dihydro-2'-deoxyguanosine) levels in gills and 7-ethoxyresorufin-O-deethylase activity in liver were assessed. Pure diesel, B5 and B20 blends changed most of the enzymes tested and in some cases, B5 and B20 induced a higher enzyme activity than pure diesel. Antioxidant system activation in P. anisitsi was effective to counteract reactive oxygen species effects, since DNA damage and lipid peroxidation levels were maintained at basal levels after all treatments. However, fish gills exposed to B20 and B100 presented increased lipid peroxidation. Despite biodiesel being more biodegradable fuel that emits less greenhouse gases, the increased lipid peroxidation showed that biofuel and its blends also represent hazards to aquatic biota. © 2013 Elsevier Ltd.

Management of pure medial orbital wall fracture with autogenous bone graft

The orbit is an irregular conical cavity formed from 7 bones including the frontal, sphenoid, zygomatic, maxillary, ethmoid, lacrimal, and palatine bones. Fractures of the internal orbit can cause a number of problems, including diplopia, ocular muscle entrapment, and enophthalmos. Although muscle entrapment is relatively rare, diplopia and enophthalmos are relatively common sequelae of internal orbital fractures. Medial orbital wall fracture is relatively uncommon and represents a challenge for its anatomical reconstruction. In this context, autogenous bone graft has been the criterion standard to provide framework for facial skeleton and orbital walls. Therefore, it is possible to harvest grafts of varying size and contour, and the operation is performed through the bicoronal incision, which is the usual approach to major orbital reconstruction. Thus, this article aimed to describe a patient with a pure medial orbital wall fracture, and it was causing diplopia and enophthalmos. The orbital fracture was treated using autogenous bone graft from calvarial bone. The authors show a follow-up of 12 months, with facial symmetry and without diplopia and enophthalmos. In addition, a computed tomography scan shows excellent bone healing at the anterior and posterior parts of the medial orbital wall reconstruction. Copyright © 2013 by Mutaz B. Habal, MD.

Clinical features of pure obsessive-compulsive disorder

Objective Psychiatric comorbidity is the rule in obsessive-compulsive disorder (OCD); however, very few studies have evaluated the clinical characteristics of patients with no co-occurring disorders (non-comorbid or pure OCD). The aim of this study was to estimate the prevalence of pure cases in a large multicenter sample of OCD patients and compare the sociodemographic and clinical characteristics of individuals with and without any lifetime axis I comorbidity. Method A cross-sectional study with 955 adult patients of the Brazilian Research Consortium on Obsessive-Compulsive Spectrum Disorders (C-TOC). Assessment instruments included the Yale-Brown Obsessive-Compulsive Scale, the Dimensional Yale-Brown Obsessive-Compulsive Scale, The USP-Sensory Phenomena Scale and the Brown Assessment of Beliefs Scale. Comorbidities were evaluated using the Structured Clinical Interview for DSM-IV Axis I Disorders. Bivariate analyses were followed by logistic regression. Results Only 74 patients (7.7%) presented pure OCD. Compared with those presenting at least one lifetime comorbidity (881, 92.3%), non-comorbid patients were more likely to be female and to be working, reported less traumatic experiences and presented lower scores in the Y-BOCS obsession subscale and in total DY-BOCS scores. All symptom dimensions except contamination-cleaning and hoarding were less severe in non-comorbid patients. They also presented less severe depression and anxiety, lower suicidality and less previous treatments. In the logistic regression, the following variables predicted pure OCD: sex, severity of depressive and anxious symptoms, previous suicidal thoughts and psychotherapy. Conclusions Pure OCD patients were the minority in this large sample and were characterized by female sex, less severe depressive and anxious symptoms, less suicidal thoughts and less use of psychotherapy as a treatment modality. The implications of these findings for clinical practice are discussed. © 2013 Elsevier Inc. All rights reserved.

'Ti''O IND.2'/'Sn''O IND. 2 modificado com 'Ag IND. 2''O', para obtenção de fotocatalisadores

Pós-graduação em Química - IQ

Síntese e caracterização de nanopartículas e filmes finos de óxidos semicondutores

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação das propriedades mecânicas de fios de Níquel-Titânio após incorporação de dobras e/ou tratamento elétrico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo e desenvolvimento de cerâmicas porosas de dióxido de titânio aditivadas com proteínas de soja

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)