Pseudoperiodic "Living" and/or controlled cationic ring-opening copolymerization of oxetane with tetrahydropyran:microstructure of polymers vs kinetics of chain growth

The "living" and/or controlled cationic ring-opening bulk copolymerization of oxetane (Ox) with tetrahydropyran (THP) (cyclic ether with no homopolymerizability) at 35°C was examined using ethoxymethyl-1 -oxoniacyclohexane hexafluoroantimonate (EMOA) and (BF3 · CH3OH)THP as fast and slow initiator, respectively, yielding living and nonliving polymers with pseudoperiodic sequences (i.e., each pentamethylene oxide fragment inserted into the polymer is flanked by two trimethylene oxide fragments). Good control over number-average molecular weight (Mn up to 150000 g mol-1) with molecular weight distribution (MWD ∼ 1.4-1, 5) broader than predicted by the Poison distribution (MWDs > 1 +1/DPn) was attained using EMOA as initiating system, i.e., C 2H5OCH2Cl with 1.1 equiv of AgSbF6 as a stable catalyst and 1.1 equiv of 2,6-di-tert-butylpyridine used as a non-nucleophilic proton trap. With (BF3 · CH 3OH)THP, a drift of the linear dependence M n(GPC) vs Mn(theory) to lower molecular weight was observed together with the production of cyclic oligomers, ∼3-5% of the Ox consumed in THP against ∼30% in dichloromethane. Structural and kinetics studies highlighted a mechanism of chains growth where the rate of mutual conversion between "strain ACE species" (chain terminated by a tertiary 1-oxoniacyclobutane ion, Al) and "strain-free ACE species" (chain terminated by a tertiary 1-oxoniacyclohexane ion, Tl) depends on the rate at which Ox converts the stable species T1 (kind of "dormant" species) into a living "propagating" center A1 (i.e., k aapp[Ox]). The role of the THP solvent associated with the suspension of irreversible and reversible transfer reactions to polymer, when the polymerization is initiated with EMOA, was predicted by our kinetic considerations. The activation -deactivation pseudoequilibrium coefficient (Qt) was then calculated in a pure theoretical basis. From the measured apparent rate constant of Ox (kOxapp) and THP (kTHPapp = ka(endo)app) consumption, Qt and reactivity ratio (kp/kd, k a(endo)/ka(exo), and ks/ka(endo) were calculated, which then allow the determination of the transition rate constant of elementary step reactions that governs the increase of Mu with conversion. © 2009 American Chemical Society.

E-Support for English Language Course to Enhance University Students’ Learning.

The peculiarities of English language teaching for students at higher educational establishment using some elements of distance learning, developed by the author, are described in this article. The results of students’ questioning, received at the end of the experimental teaching, are suggested and analyzed. The conclusions are formulated and the further ways of teaching English with e-support are outlined.

Recent advances in topical therapeutics for vitreoretinal diseases

Eye drops are convenient for patients, but achieving therapeutic doses and maintaining sustained drug release without frequent re-application to treat diseases of the retina has been largely unsuccessful. Topical administration of drugs is hindered by the anatomy, physiology, and biochemistry of the eye and its highly effective defence mechanisms. Advances in nanotechnology have led to the experimental use of topical permeation-enhancing liposomes, emulsions, and microspheres to enhance absorption and penetration of drugs across membranes; allow controlled release of the drug; and to target drugs at distinct tissues to allow sufficient local bioavailability. In the near future it is hoped that improved technologies may provide means of sustained topical drug delivery for retinal therapy, with improved side-effect profiles and reduced cost compared with currently available clinical treatments.

Microfluidic-controlled manufacture of liposomes for the solubilisation of a poorly water soluble drug

Besides their well-described use as delivery systems for water-soluble drugs, liposomes have the ability to act as a solubilizing agent for drugs with low aqueous solubility. However, a key limitation in exploiting liposome technology is the availability of scalable, low-cost production methods for the preparation of liposomes. Here we describe a new method, using microfluidics, to prepare liposomal solubilising systems which can incorporate low solubility drugs (in this case propofol). The setup, based on a chaotic advection micromixer, showed high drug loading (41 mol%) of propofol as well as the ability to manufacture vesicles with at prescribed sizes (between 50 and 450 nm) in a high-throughput setting. Our results demonstrate the ability of merging liposome manufacturing and drug encapsulation in a single process step, leading to an overall reduced process time. These studies emphasise the flexibility and ease of applying lab-on-a-chip microfluidics for the solubilisation of poorly water-soluble drugs.

Designing an E-Mail Prototype to Enhance Effective Communication and Task Management: A Case Study

This paper deals with communicational breakdowns and misunderstandings in computer mediated communication (CMC) and ways to recover from them or to prevent them. The paper describes a case study of CMC conducted in a company named Artigiani. We observed communication and conducted content analysis of e-mail messages, focusing on message exchanges between customer service representatives (CSRs) and their contacts. In addition to task management difficulties, we identified communication breakdowns that result from differences between perspectives, and from the lack of contextual information, mainly technical background and professional jargon at the customers’ side. We examined possible ways to enhance CMC and accordingly designed a prototype for an e-mail user interface that emphasizes a communicational strategy called contextualization as a central component for obtaining effective communication and for supporting effective management and control of organizational activities, especially handling orders, price quoting, and monitoring the supply and installation of products.

Effect of incorporating cholesterol into DDA:TDB liposomal adjuvants on Bilayer properties, biodistribution, and immune responses

Cholesterol is an abundant component of mammalian cell membranes and has been extensively studied as an artificial membrane stabilizer in a wide range of phospholipid liposome systems. In this study, the aim was to investigate the role of cholesterol in cationic liposomal adjuvant system based on dimethyldioctadecylammonium (DDA) and trehalose 6,6'-dibehenate (TDB) which has been shown as a strong adjuvant system for vaccines against a wide range of diseases. Packaging of cholesterol within DDA:TDB liposomes was investigated using differential scanning calorimetery and surface pressure-area isotherms of lipid monolayers; incorporation of cholesterol into liposomal membranes promoted the formation of a liquid-condensed monolayer and removed the main phase transition temperature of the system, resulting in an increased bilayer fluidity and reduced antigen retention in vitro. In vivo biodistribution studies found that this increase in membrane fluidity did not alter deposition of liposomes and antigen at the site of injection. In terms of immune responses, early (12 days after immunization) IgG responses were reduced by inclusion of cholesterol; thereafter there were no differences in antibody (IgG, IgG1, IgG2b) responses promoted by DDA:TDB liposomes with and without cholesterol. However, significantly higher levels of IFN-gamma were induced by DDA:TDB liposomes, and liposome uptake by macrophages in vitro was also shown to be higher for DDA:TDB liposomes compared to their cholesterol-containing counterparts, suggesting that small changes in bilayer mechanics can impact both cellular interactions and immune responses. © 2013 American Chemical Society.

Counting on use of technology to enhance learning

In global policy documents, the language of Technology-Enhanced Learning (TEL) now firmly structures a perception of educational technology which ‘subsumes’ terms like Networked Learning and e-Learning. Embedded in these three words though is a deterministic, economic assumption that technology has now enhanced learning, and will continue to do so. In a market-driven, capitalist society this is a ‘trouble free’, economically focused discourse which suggests there is no need for further debate about what the use of technology achieves in learning. Yet this raises a problem too: if technology achieves goals for human beings, then in education we are now simply counting on ‘use of technology’ to enhance learning. This closes the door on a necessary and ongoing critical pedagogical conversation that reminds us it is people that design learning, not technology. Furthermore, such discourse provides a vehicle for those with either strong hierarchical, or neoliberal agendas to make simplified claims politically, in the name of technology. This chapter is a reflection on our use of language in the educational technology community through a corpus-based Critical Discourse Analysis (CDA). In analytical examples that are ‘loaded’ with economic expectation, we can notice how the policy discourse of TEL narrows conversational space for learning so that people may struggle to recognise their own subjective being in this language. Through the lens of Lieras’s externality, desubjectivisation and closure (Lieras, 1996) we might examine possible effects of this discourse and seek a more emancipatory approach. A return to discussing Networked Learning is suggested, as a first step towards a more multi-directional conversation than TEL, that acknowledges the interrelatedness of technology, language and learning in people’s practice. Secondly, a reconsideration of how we write policy for educational technology is recommended, with a critical focus on how people learn, rather than on what technology is assumed to enhance.

Joining the dots:using structured e-portfolio assignments to enhance reflection

Although there has been an increased interest in the use of electronic portfolios in higher education over the last five years, relatively little is known about the potential of such tools to support the development of higher order abilities for students, such as reflection, in a structured way that is suitable for assessment. This paper reports the findings from a small-scale research which sets out to compare the outcomes of reflective assignments in two cohorts of participants in a Postgraduate Certificate in Professional Practice in Higher Education in the UK. Participants in the programme were asked to submit reflective accounts using an e-portfolio system as part of their formal assessment. One cohort completed the assessment using some generic guidelines of how to reflect and construct an e-portfolio page without a given template or structure, whereas another cohort was given a specific template with clear assessment criteria to gauge the assembly of their reflections. The authors, who are also tutors in the programme, analysed the submitted reflections following open coding procedures. The analysis found a tendency for the reflection in the first cohort to be merely descriptive without progressing to speculating objectively about answers to relevant analytical questions about the process involved in the ability under scrutiny. In contrast the assignments of cohort two were found to be more insightful in terms of assimilating random bits of materials, thoughts and self-questions into complete reflective accounts. These findings bring some evidence to support and indeed promote a more structured approach to reflective practice, which can be further enhanced through a carefully created e-portfolio template and associated assessment criteria.

Designing liposomal adjuvants for the next generation of vaccines

Liposomes not only offer the ability to enhance drug delivery, but can effectively act as vaccine delivery systems and adjuvants. Their flexibility in size, charge, bilayer rigidity and composition allow for targeted antigen delivery via a range of administration routes. In the development of liposomal adjuvants, the type of immune response promoted has been linked to their physico-chemical characteristics, with the size and charge of the liposomal particles impacting on liposome biodistribution, exposure in the lymph nodes and recruitment of the innate immune system. The addition of immunostimulatory agents can further potentiate their immunogenic properties. Here, we outline the attributes that should be considered in the design and manufacture of liposomal adjuvants for the delivery of sub-unit and nucleic acid based vaccines.

Phosphatidylserine-containing liposomes:modulators of rhinovirus induced inflammatory responses

Background: Human rhinoviral infections are major contributors to the healthcare burden associated with acute exacerbations of asthma. We, and others have recently demonstrated that rhinovirus (RV)-induced inflammatory responses are mediated by multiple signalling mechanisms, such as IL-1/MyD88 (1) and TLR3/RIGI (2). We have also previously published work showing that TLR signalling is effectively inhibited by phosphatidylserine-containing liposomes (SAPS), through the disruption of membrane microdomains (3). Evidence has also suggested that membrane microdomains may influence infections with RV. In this study, we explored the ability of SAPS to modulate responses to the natural viral pathogens, RV-1B and RV-16. Method: The immortalized bronchial epithelial cell line, BEAS-2B or primary bronchial epithelial cells were infected with RV-1B or RV-16 at a TCID50/ml of 19107 for 1 h. Immediately following infection, various concentrations of SAPS were added and changes in cytokine release were measured at 24 h. SAPS remained present throughout. Type I and III interferon (IFN) expression and rates of viral replication were measured by quantitative PCR. Virus quantification was also performed using a viral CPE assay, and IFN signalling was measured by western blot. Liposome stability was characterised and intracellular trafficking of fluorescently labelled SAPS in BEAS-2B cells was investigated using confocal microscopy. For in vivo studies, female wt Balb/c mice were pre-treated with SAPS for 2 h prior to infection with RV as previously described and changes in BAL cell number, BAL cytokine production and viral replication were quantified (4). Results: Characterisation of SAPS liposomes by mass spectrometry showed no obvious signs of oxidation over the time period tested, and liposome size remained constant. Preliminary confocal studies revealed that SAPS was rapidly internalised within the cell and was found to associate with intracellular compartments such as the early endosome and golgi. Viral infected BEAS-2B cells co-incubated with SAPS, showed notably impaired responses to RV as assessed by release of CXCL8 and CCL5. SAPS also reduced RV-induced IFNb production and STAT-1 phosphorylation, without significantly influencing viral replication rates. Modest increases in viral particle production were only observed at 48 and 72 h time points. Suppression of viral-induced cytokine production was also observed in primary bronchial epithelial cells and pilot in vivo studies showed that SAPS results in reduced KC production at 24 h post viral infection, and this was associated with reduced neutrophil numbers within the BAL fluid. Conclusion: Our data demonstrates a potential means of modulating inflammatory responses induced by human rhinovirus.

Competitive processes in controlled cationic ring-opening polymerization of oxetane:a Lotka-Volterra predator-prey model of two growing species competing for the same resources

The activation-deactivation pseudo-equilibrium coefficient Qt and constant K0 (=Qt x PaT1,t = ([A1]x[Ox])/([T1]x[T])) as well as the factor of activation (PaT1,t) and rate constants of elementary steps reactions that govern the increase of Mn with conversion in controlled cationic ring-opening polymerization of oxetane (Ox) in 1,4-dioxane (1,4-D) and in tetrahydropyran (THP) (i.e. cyclic ethers which have no homopolymerizability (T)) were determined using terminal-model kinetics. We show analytically that the dynamic behavior of the two growing species (A1 and T1) competing for the same resources (Ox and T) follows a Lotka-Volterra model of predator-prey interactions. © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A three-level RFID-based automation approach to enhance network competitiveness

Today, the question of how to successfully reduce supply chain costs whilst increasing customer satisfaction continues to be the focus of many firms. It is noted in the literature that supply chain automation can increase flexibility whilst reducing inefficiencies. However, in the dynamic and process driven environment of distribution, there is the absence of a cohesive automation approach to guide companies in improving network competitiveness. This paper aims to address the gap in the literature by developing a three-level framework automation application approach with the assistance of radio frequency identification (RFID) technology and returnable transport equipment (RTE). The first level considers the automation of data retrieval and highlights the benefits of RFID. The second level consists of automating distribution processes such as unloading and assembling orders. As the labour is reduced with the introduction of RFID enabled robots, the balance between automation and labour is discussed. Finally, the third level is an analysis of the decision-making process at network points and the application of cognitive automation to objects. A distribution network scenario is formed and used to illustrate network reconfiguration at each level. The research pinpoints that RFID enabled RTE offers a viable tool to assist supply chain automation. Further research is proposed in particular, the area of cognitive automation to aide with decision-making.

Development of photosensitive liposomes for the controlled release of drugs

The facility to controlled triggered release from a “cage” system remains a key requirement for novel drug delivery. Earlier studies have shown that Bis-Azo PC based photosensitive liposomes are beneficial for drug delivery. Thus, the aim of this project was to develop photosensitive liposomes that can be used for the controlled release of drugs through UV irradiation, particularly therapeutic agents for the treatment of psoriasis. Bis-Azo PC was successfully synthesized and incorporated into a range of liposomal formulations, and these liposomes were applied for the controlled release of BSA-FITC. Bis-Azo PC sensitized liposomes were prepared via interdigitation fusion method. IFV containing optimum cholesterol amount in terms of protein loading, stability and photo-trigger release of protein was investigated. Further studies investigated the stability and triggered release of the HMT from IFV. Finally, permeation behavior of HMT and HMT-entrapped IFV through rat skin was examined using Franz cell. Results from protein study indicated that the stable entrapment of the model protein was feasible as shown through fluorescence spectroscopy and maximum of 84% protein release from IFV after 12 min of UV irradiation. Moreover, stability studies indicated that IFV were more stable at 4 0C as compared to 25 0C. Hence, DPPC:Chol:Bis-Azo PC (16:2:1) based IFV was chosen for the controlled release of HMT and these studies exhibited that photo-trigger release and stability data of HMT-entrapped IFV are in line with the protein results. Franz cell work inferred that HMT-entrapped IFV attributed to slower skin permeation as compared to HMT. CLSM also demonstrated that HMT can be used as a fluorescent label for the in vitro skin study. Overall, the work highlighted in this thesis has given useful insight into the potentials of Bis-Azo PC based IFV as a promising carrier for the treatment of psoriasis.

Nanotechnology and microfluidics:formulation design and on-chip manufacture of nanoparticles

Nanoparticles offer an ideal platform for the delivery of small molecule drugs, subunit vaccines and genetic constructs. Besides the necessity of a homogenous size distribution, defined loading efficiencies and reasonable production and development costs, one of the major bottlenecks in translating nanoparticles into clinical application is the need for rapid, robust and reproducible development techniques. Within this thesis, microfluidic methods were investigated for the manufacturing, drug or protein loading and purification of pharmaceutically relevant nanoparticles. Initially, methods to prepare small liposomes were evaluated and compared to a microfluidics-directed nanoprecipitation method. To support the implementation of statistical process control, design of experiment models aided the process robustness and validation for the methods investigated and gave an initial overview of the size ranges obtainable in each method whilst evaluating advantages and disadvantages of each method. The lab-on-a-chip system resulted in a high-throughput vesicle manufacturing, enabling a rapid process and a high degree of process control. To further investigate this method, cationic low transition temperature lipids, cationic bola-amphiphiles with delocalized charge centers, neutral lipids and polymers were used in the microfluidics-directed nanoprecipitation method to formulate vesicles. Whereas the total flow rate (TFR) and the ratio of solvent to aqueous stream (flow rate ratio, FRR) was shown to be influential for controlling the vesicle size in high transition temperature lipids, the factor FRR was found the most influential factor controlling the size of vesicles consisting of low transition temperature lipids and polymer-based nanoparticles. The biological activity of the resulting constructs was confirmed by an invitro transfection of pDNA constructs using cationic nanoprecipitated vesicles. Design of experiments and multivariate data analysis revealed the mathematical relationship and significance of the factors TFR and FRR in the microfluidics process to the liposome size, polydispersity and transfection efficiency. Multivariate tools were used to cluster and predict specific in-vivo immune responses dependent on key liposome adjuvant characteristics upon delivery a tuberculosis antigen in a vaccine candidate. The addition of a low solubility model drug (propofol) in the nanoprecipitation method resulted in a significantly higher solubilisation of the drug within the liposomal bilayer, compared to the control method. The microfluidics method underwent scale-up work by increasing the channel diameter and parallelisation of the mixers in a planar way, resulting in an overall 40-fold increase in throughput. Furthermore, microfluidic tools were developed based on a microfluidics-directed tangential flow filtration, which allowed for a continuous manufacturing, purification and concentration of liposomal drug products.

Effective reconfigurable antenna designs to enhance performance and enable wireless powering

With the increase in traffic on the internet, there is a greater demand for wireless mobile and ubiquitous applications. These applications need antennas that are not only broadband, but can also work in different frequency spectrums. Even though there is a greater demand for such applications, it is still imperative to conserve power. Thus, there is a need to design multi-broadband antennas that do not use a lot of power. Reconfigurable antennas can work in different frequency spectrums as well as conserve power. The current designs of reconfigurable antennas work only in one band. There is a need to design reconfigurable antennas that work in different frequency spectrums. In this current era of high power consumption there is also a greater demand for wireless powering. This dissertation explores ideal designs of reconfigurable antennas that can improve performance and enable wireless powering. This dissertation also presents lab results of the multi-broadband reconfigurable antenna that was created. A detailed mathematical analyses, as well as extensive simulation results are also presented. The novel reconfigurable antenna designs can be extended to Multiple Input Multiple Output (MIMO) environments and military applications.^