Precision of fit and retention force of cast non-precious-crowns on standard titanium implant-abutment with different design and height

OBJECTIVE The cost-effectiveness of cast nonprecious frameworks has increased their prevalence in cemented implant crowns. The purpose of this study was to assess the effect of the design and height of the retentive component of a standard titanium implant abutment on the fit, possible horizontal rotation and retention forces of cast nonprecious alloy crowns prior to cementation. MATERIALS AND METHODS Two abutment designs were examined: Type A with a 6° taper and 8 antirotation planes (Straumann Tissue-Level RN) and Type B with a 7.5° taper and 1 antirotation plane (SICace implant). Both types were analyzed using 60 crowns: 20 with a full abutment height (6 mm), 20 with a medium abutment height (4 mm), and 20 with a minimal (2.5 mm) abutment height. The marginal and internal fit and the degree of possible rotation were evaluated by using polyvinylsiloxane impressions under a light microscope (magnification of ×50). To measure the retention force, a custom force-measuring device was employed. STATISTICAL ANALYSIS one-sided Wilcoxon rank-sum tests with Bonferroni-Holm corrections, Fisher's exact tests, and Spearman's rank correlation coefficient. RESULTS Type A exhibited increased marginal gaps (primary end-point: 55 ± 20 μm vs. 138 ± 59 μm, P < 0.001) but less rotation (P < 0.001) than Type B. The internal fit was also better for Type A than for Type B (P < 0.001). The retention force of Type A (2.49 ± 3.2 N) was higher (P = 0.019) than that of Type B (1.27 ± 0.84 N). Reduction in abutment height did not affect the variables observed. CONCLUSION Less-tapered abutments with more antirotation planes provide an increase in the retention force, which confines the horizontal rotation but widens the marginal gaps of the crowns. Thus, casting of nonprecious crowns with Type A abutments may result in clinically unfavorable marginal gaps.

Vertical mobility in the Swiss Alps. The alpine pass Schnidejoch and indications of early pastoralism.

Since 2003 a melting ice field on the Schnidejoch pass (2756 a.s.l) delivered several hundred objects from the Neolithic, the Bronze and Iron Age as well as from Roman and Early Medieval times. The oldest finds date to the beginning 5th millennium BC, the youngest ones date around 1000 AD. Most of the objects stem from the Neolithic and the Bronze Age and are of organic origin. A series of more than 70 radiocarbon dates confirms that the Schnidejoch pass, linking the Bernese Highlands with the River Rhone valley, was in use at least from 4800–4500 BC on. The accessibility of the pass was easy when the glaciers descending from the nearby Wildhorn mountain range (peak on 3248 a.s.l) were in a retreating phase. In contrary glacier advances closed the way to the pass. In 2010 a palaeoecological study of sediment cores researched nearby Lake Iffig (2065 m a.s.l.). The results show clear indications of early human impact in this alpine area. Linking archaeological finds from Schnidejoch pass and River Rhone valley with the palaeoecological data can be interpreted as early indications of alpine pastoralism and transhumance. The combined archaeological and paleoecolical research allows to explain vertical mobility in the Swiss Alps.

Impact of platelet rich plasma and adipose stem cells on lymphangiogenesis in a murine tail lymphedema model.

BACKGROUND Lymphedema is an underdiagnosed pathology which in industrialized countries mainly affects cancer patients that underwent lymph node dissection and/or radiation. Currently no effective therapy is available so that patients' life quality is compromised by swellings of the concerned body region. This unfortunate condition is associated with body imbalance and subsequent osteochondral deformations and impaired function as well as with an increased risk of potentially life threatening soft tissue infections. METHODS The effects of PRP and ASC on angiogenesis (anti-CD31 staining), microcirculation (Laser Doppler Imaging), lymphangiogenesis (anti-LYVE1 staining), microvascular architecture (corrosion casting) and wound healing (digital planimetry) are studied in a murine tail lymphedema model. RESULTS Wounds treated by PRP and ASC healed faster and showed a significantly increased epithelialization mainly from the proximal wound margin. The application of PRP induced a significantly increased lymphangiogenesis while the application of ASC did not induce any significant change in this regard. CONCLUSIONS PRP and ASC affect lymphangiogenesis and lymphedema development and might represent a promising approach to improve regeneration of lymphatic vessels, restore disrupted lymphatic circulation and treat or prevent lymphedema alone or in combination with currently available lymphedema therapies.

Optimizing Performance of Conductive Nanoparticle-filled Membranes

Conductive membranes were prepared by magnetic alignment of graphite-coated iron nanoparticles (GCINs) in a polyisobutylene (PIB) matrix, which was cast onto an interdigitated surface electrode. Toluene and tetrahydrofuran (THF) were used as solvents for the casting solution. Different molecular weights of PIB and solutions with concentrations ranging from 0.05- to 50-wt% were explored to optimize the mechanical and physical properties of the membrane. The amount of GCINs used in the membranes ranged from 0.1- to 2.5-wt%, and a sonicator was used to disperse the particles in the membrane. Sedimentation and surfactant studies were conducted to investigate the dispersion of GCINs in solutions. Progresses were made to find an optimal combination of various parameters in order to attain thin homogenous membranes for fast response.

Patients' preferences for a prostate cancer consultation, a discrete choice experiment

Four basic medical decision making models are commonly discussed in the literature in reference to physician-patient interactions. All fall short in their attempt to capture the nuances of physician-patient interactions, and none satisfactorily address patients' preferences for communication and other attributes of care. Prostate cancer consultations are one setting where preferences matter and are likely to vary among patients. Fortunately, discrete choice experiments are capable of casting light on patients' preferences for communication and other attributes of value that make up a consultation before the consultation occurs, which is crucial if patients are to derive the most utility from the process of reaching a decision as well as the decision itself. The results of my dissertation provide strong support to the notion that patients, at least in the hypothetical setting of a DCE, have identifiable preferences for the attributes of a prostate cancer consultation and that those preferences are capable of being elicited before a consultation takes place. Further, patients' willingness-to-pay for the non-cost attributes of the consultation is surprisingly robust to a variety of individual level variables of interest. ^

Luces y sombras de la modernidad en la ciencia política

El presente trabajo se plantea analizar el concepto moderno de ciencia para comprender las luces y sombras que proyecta en el campo de la investigación en ciencias sociales en general y en la ciencia política en particular. En este sentido, nos preguntamos ¿cuál es la concepción de ciencia que impera en el pensamiento de los autores clásicos analizados? ¿Cómo estos autores conciben la conexión entre ciencia y acción política? ¿Cuáles son los principales debates epistemológicos que enfrenta la ciencia política de nuestro tiempo? En virtud de estos interrogantes, se construye la siguiente hipótesis: es necesario replantear algunos elementos del paradigma científico de la modernidad para poder abordar mejor los nuevos problemas de la ciencia política. Esta posición nos lleva a reflexionar sobre los desafíos que enfrentamos los cientistas políticos actuales y las similitudes y/o diferencias que tenemos con nuestros colegas del pasado. La metodología de investigación se funda en el análisis comparado de algunas obras clásicas de Aristóteles, Maquiavelo, Descartes, Hobbes, Kant, Tocqueville, Weber y Arendt.

Geochemistry on Holocene sediments from the Mediterranean

The enhanced accumulation of organic matter in Eastern Mediterranean sapropels and their unusually low d15N values have been attributed to either enhanced nutrient availability which led to elevated primary production and carbon sequestration or to enhanced organic matter preservation under anoxic conditions. In order to evaluate these two hypothesis we have determined Ba/Al ratios, amino acid composition, N and organic C concentrations and d15N in sinking particles, surface sediments, eight spatially distributed core records of the youngest sapropel S1 (10-6 ka) and older sapropels (S5, S6) from two locations. These data suggest that (i) temporal and spatial variations in d15N of sedimentary N are driven by different degrees of diagenesis at different sites rather than by changes in N-sources or primary productivity and (ii) present day TOC export production would suffice to create a sapropel like S1 under conditions of deep-water anoxia. This implies that both enhanced TOC accumulation and d15N depletion in sapropels were due to the absence of oxygen in deep waters. Thus preservation plays a major role for the accumulation of organic-rich sediments casting doubt on the need of enhanced primary production for sapropel formation.

Supplemental Data - Bioremediation of polluted air from an industrial plant using rotating biofilter reactor-based technology

Two microbial isolates (HDB, Hydrogen-Degrading Bacteria) obtained from industrial wastewater were inoculated into the rotating biofilter reactor 'Biowheel 2.0' and tested for the ability to purify gaseous flows containing benzene and non-methane volatile organic compounds (NMVOCs) released at an industrial plant. Different classes of gaseous flow were tested, namely 'cold box', 'in shell', and 'mix', all of them associated with the industrial process of 'mold-casting'. A significant increase in Removal Efficiency (RE) was recorded for benzene and NMVOCs in the inoculated 'Biowheel 2.0' biofilter, compared to uninoculated control. For each type of gaseous flow, odor impact was evaluated in the inlet and outlet flows at the industrial plant, using the test panel method and electronic nose technology. A significant drop in the amount of Olfactometric Units (O.U.) m-3 occurred in the gaseous flows treated with the bacterial consortium. The reported data demonstrate the ability of the consortium to degrade hydrocarbons, revealing its potential for bioremediation of polluted air emissions occurring at industrial plants.

Effects of ocean acidification on overwintering juvenile Arctic pteropods Limacina helicina

Pteropods are planktonic mollusks that play an important role in the food web of various ecosystems, particularly at high latitudes. Because they produce an aragonitic shell, pteropods are expected to be very sensitive to ocean acidification driven by anthropogenic CO2 emissions. The effect of ocean acidification was investigated using juveniles of the Arctic pteropod Limacina helicina from the Canada Basin of the Arctic Ocean. The animals were maintained in 3 controlled pH conditions (total scale pH [pHT] = 8.05, 7.90 or 7.75) for 8 d, and their mortality and the linear extension of their shell were monitored. The pH did not impact the mortality rate, but the linear extension of the shell decreased as a function of declining pH. Surprisingly, the pteropods were still able to extend their shell at an aragonite saturation state as low as 0.6. Nevertheless, dissolution marks were visible on the whole shell, indicating that calcium carbonate dissolution had also occurred, casting doubts on the ability of the pteropods to maintain a positive balance between precipitation and dissolution of calcium carbonate under corrosive conditions.

Aplicación de documentos de identificación electrónica a un esquema de voto telemático a escala paneuropea, seguro, auditable y verificable.

En este trabajo de tesis se propone un esquema de votación telemática, de carácter paneuropeo y transnacional, que es capaz de satisfacer las más altas exigencias en materia de seguridad. Este enfoque transnacional supone una importante novedad que obliga a identificar a los ciudadanos más allá de las fronteras de su país, exigencia que se traduce en la necesidad de que todos los ciudadanos europeos dispongan de una identidad digital y en que ésta sea reconocida más allá de las fronteras de su país de origen. Bajo estas premisas, la propuesta recogida en esta tesis se aborda desde dos vertientes complementarias: por una parte, el diseño de un esquema de votación capaz de conquistar la confianza de gobiernos y ciudadanos europeos y, por otra, la búsqueda de una respuesta al problema de interoperabilidad de Sistemas de Gestión de Identidad (IDMs), en consonancia con los trabajos que actualmente realiza la UE para la integración de los servicios proporcionados por las Administraciones Públicas de los distintos países europeos. El punto de partida de este trabajo ha sido la identificación de los requisitos que determinan el adecuado funcionamiento de un sistema de votación telemática para, a partir de ellos,proponer un conjunto de elementos y criterios que permitan, por una parte, establecer comparaciones entre distintos sistemas telemáticos de votación y, por otra, evaluar la idoneidad del sistema propuesto. A continuación se han tomado las más recientes y significativas experiencias de votación telemática llevadas a cabo por diferentes países en la automatización de sus procesos electorales, analizándolas en profundidad para demostrar que, incluso en los sistemas más recientes, todavía subsisten importantes deficiencias relativas a la seguridad. Asimismo, se ha constatado que un sector importante de la población se muestra receloso y, a menudo, cuestiona la validez de los resultados publicados. Por tanto, un sistema que aspire a ganarse la confianza de ciudadanos y gobernantes no sólo debe operar correctamente, trasladando los procesos tradicionales de votación al contexto telemático, sino que debe proporcionar mecanismos adicionales que permitan superar los temores que inspira el nuevo sistema de votación. Conforme a este principio, el enfoque de esta tesis, se orienta, en primer lugar, hacia la creación de pruebas irrefutables, entendibles y auditables a lo largo de todo el proceso de votación, que permitan demostrar con certeza y ante todos los actores implicados en el proceso (gobierno, partidos políticos, votantes, Mesa Electoral, interventores, Junta Electoral,jueces, etc.) que los resultados publicados son fidedignos y que no se han violado los principios de anonimato y de “una persona, un voto”. Bajo este planteamiento, la solución recogida en esta tesis no sólo prevé mecanismos para minimizar el riesgo de compra de votos, sino que además incorpora mecanismos de seguridad robustos que permitirán no sólo detectar posibles intentos de manipulación del sistema, sino también identificar cuál ha sido el agente responsable. De forma adicional, esta tesis va más allá y traslada el escenario de votación a un ámbito paneuropeo donde aparecen nuevos problemas. En efecto, en la actualidad uno de los principales retos a los que se enfrentan las votaciones de carácter transnacional es sin duda la falta de procedimientos rigurosos y dinámicos para la actualización sincronizada de los censos de votantes de los distintos países que evite la presencia de errores que redunden en la incapacidad de controlar que una persona emita más de un voto, o que se vea impedido del todo a ejercer su derecho. Este reconocimiento de la identidad transnacional requiere la interoperabilidad entre los IDMs de los distintos países europeos. Para dar solución a este problema, esta tesis se apoya en las propuestas emergentes en el seno de la UE, que previsiblemente se consolidarán en los próximos años, tanto en materia de identidad digital (con la puesta en marcha de la Tarjeta de Ciudadano Europeo) como con el despliegue de una infraestructura de gestión de identidad que haga posible la interoperabilidad de los IDMs de los distintos estados miembros. A partir de ellas, en esta tesis se propone una infraestructura telemática que facilita la interoperabilidad de los sistemas de gestión de los censos de los distintos estados europeos en los que se lleve a cabo conjuntamente la votación. El resultado es un sistema versátil, seguro, totalmente robusto, fiable y auditable que puede ser aplicado en elecciones paneuropeas y que contempla la actualización dinámica del censo como una parte crítica del proceso de votación. ABSTRACT: This Ph. D. dissertation proposes a pan‐European and transnational system of telematic voting that is capable of meeting the strictest security standards. This transnational approach is a significant innovation that entails identifying citizens beyond the borders of their own country,thus requiring that all European citizens must have a digital identity that is recognized beyond the borders of their country of origin. Based on these premises, the proposal in this thesis is analyzed in two mutually‐reinforcing ways: first, a voting system is designed that is capable of winning the confidence of European governments and citizens and, second, a solution is conceived for the problem of interoperability of Identity Management Systems (IDMs) that is consistent with work being carried out by the EU to integrate the services provided by the public administrations of different European countries. The starting point of this paper is to identify the requirements for the adequate functioning of a telematic voting system and then to propose a set of elements and criteria that will allow for making comparisons between different such telematic voting systems for the purpose of evaluating the suitability of the proposed system. Then, this thesis provides an in‐depth analysis of most recent significant experiences in telematic voting carried out by different countries with the aim of automating electoral processes, and shows that even the most recent systems have significant shortcomings in the realm of security. Further, a significant portion of the population has shown itself to be wary,and they often question the validity of the published results. Therefore, a system that aspires to win the trust of citizens and leaders must not only operate correctly by transferring traditional voting processes into a telematic environment, but must also provide additional mechanisms that can overcome the fears aroused by the new voting system. Hence, this thesis focuses, first, on creating irrefutable, comprehensible and auditable proof throughout the voting process that can demonstrate to all actors in the process – the government, political parties, voters, polling station workers, electoral officials, judges, etc. ‐that the published results are accurate and that the principles of anonymity and one person,one vote, have not been violated. Accordingly, the solution in this thesis includes mechanisms to minimize the risk of vote buying, in addition to robust security mechanisms that can not only detect possible attempts to manipulate the system, but also identify the responsible party. Additionally, this thesis goes one step further and moves the voting scenario to a pan‐European scale, in which new problems appear. Indeed, one of the major challenges at present for transnational voting processes is the lack of rigorous and dynamic procedures for synchronized updating of different countries’ voter rolls, free from errors that may make the system unable to keep an individual from either casting more than one vote, or from losing the effective exercise of the right to vote. This recognition of transnational identity requires interoperability between the IDMs of different European countries. To solve the problem, this thesis relies on proposals emerging within the EU that are expected to take shape in the coming years, both in digital identity – with the launch of the European Citizen Card – and in the deployment of an identity management infrastructure that will enable interoperability of the IDMs of different member states. Based on these, the thesis proposes a telematic infrastructure that will achieve interoperability of the census management systems of European states in which voting processes are jointly carried out. The result is a versatile, secure, totally robust, reliable and auditable system that can be applied in pan‐European election, and that includes dynamic updating of the voter rolls as a critical part of the voting process.

Effect of the cooling rate on microstructure and hardness of MAR-M247 Ni-based superalloy

The effect of cooling rate on the microstructure of MAR-M247 Ni-based superalloy was investigated via physical simulation of the casting process. Solidification experiments with cooling rates in the range of 0.25–10 K/s showed smooth temperature profiles with measured cooling rates matching the set values. The MAR-M247 showed cellular (0.25 K/s) and dendritic (1, 5 and 10 K/s) microstructures. Microconstituents also varied with cooling rates: γ/γ′ matrix with carbides and γ/γ′ eutectic at 0.25 K/s, γ/γ′ matrix with carbides at 1 K/s, and γ/γ′ matrix with carbides and γ/MC eutectic at 5 and 10 K/s. Moreover, the secondary dendritic arm spacing decreased and the hardness increased with the increase in the cooling rates.

Estructura y pruebas con Labmu

La implantación de la televisión digital en España ha supuesto un conjunto de desafíos técnicos y de orden práctico que se han ido acometiendo en multitud de ámbitos, desde la legislación que normaliza las infraestructuras comunes de telecomunicación hasta los cambios en las instalaciones y receptores donde el usuario final recibe los servicios. Por la complejidad y el carácter interdisciplinar de los conocimientos necesarios el aprendizaje de los titulados dentro del ámbito de la Telecomunicación supone también un reto importante. Este proyecto realiza una primera aproximación a un conjunto de herramientas hardware y software de ayuda a la enseñanza de esta amplia disciplina. El proyecto se ha realizado en torno a Labmu laboratorio multiusuario para prácticas de televisión digital de la empresa Xpertia. Se ha realizado para conocer y documentar sus posibilidades. También se ha documentado la tarjeta moduladora DTA-111 y el software para Windows StreamXpress. Estos sistemas ofrecen muchas posibilidades para la docencia de la televisión digital en todas las áreas desde la codificación fuente hasta la decodificación en el usuario final. En particular para ambos sistemas se han realizado pruebas en radiofrecuencia de emisiones de TDT. También se han establecido algunas ideas para trabajo futuro con estos sistemas. El proyecto se divide en seis capítulos: Capitulo 1: En el primer capítulo titulado Introducción se presenta el proyecto. Capítulo 2: En el segundo capítulo titulado Composición Hardware Labmu se presentan todos los componentes del laboratorio Labmu con la descripción de cada componente y sus características técnicas. Así mismo se presenta el interconexionado y configuración con que se ha trabajado. Capítulo 3: En el tercer capítulo titulado Software Labmu se describe como manual de usuario todos los componentes y posibilidades de software de Labmu. Capítulo 4: En el cuarto capítulo titulado Medidas con Labmu se realiza las medidas de MER, CBER, VBER, C/N y potencia de canal de los canales emitidos en la Comunidad de Madrid, comparando estas medidas con el analizador Promax Prodig-5. Capítulo 5: En el quinto capítulo titulado Tarjeta receptora y software se describe la tarjeta DTA-111 y el software StreamXpress, realizando medidas con el analizador Promax Prodig-5 introduciendo errores a la señal emitida por la tarjeta, y estudiando los niveles límites de visualización correcta. Capítulo 6: En el sexto y último capítulo titulado Conclusiones se presentan las conclusiones del proyecto y un plan de trabajo futuro ABSTRACT. The implantation of Digital Television in Spain (TDT) has implied a number of technical and practical challenges in several scopes. These challenges range from recommendations that standardize common telecommunications infrastructure to the changes in facilities where the end user receives digital services. The complexity and the interdisciplinary nature of skills that graduate Telecommunications students need to learn, is also a major challenge. This project is a first approach of a set of hard ware and software tools to help in the task of teaching this broad range discipline. The project has been carried out on Labmu, a multiuser Digital Television laboratory created by the Xpertia company. Its objectives are to understand and document this range of possibilities. DTA-111 modulator card and software for Windows StreamXpress have also been documented. These systems offer many options for teaching digital television in all areas, from source coding to end user decoding. In particular, both systems were tested on RF emissions in TDT. More over some ideas for future work with these systems have also foreseen. The project is structured in six chapters: Chapter1: This section Introduces the project. Chapter2: Titled “The Composition Hardware Labmu” presents Labmu lab components and provides descriptions for each component and its technical characteristics. It also presents the interconnection and configuration we have been using. Chapter3: Titled “Software Labmu” is a user manual, describing all components and software possibilities Labmu offers. Chapter4: Titled “Measures to Labmu” presents MER, CBER, VBER, C /N and channel power measures provided by Labmu in comparison with Promax Prodig-5 measures for all channels broad casting digital television services in the Community of Madrid. Chapter 5 Titled “Receiver card and software” describes DTA-111 card and software StreamXpress. Also the effects of errors insertion performed by this card are measured with the PromaxProdig-5 meter. Threes hold levels for correct reception are also studied. Chapter6: Entitled Conclusions presents the conclusions of the project and a plan for future work.

About the origin of low wafer performance and crystal defect generation on seed-cast growth of industrial mono-like silicon ingots

The era of the seed-cast grown monocrystalline-based silicon ingots is coming. Mono-like, pseudomono or quasimono wafers are product labels that can be nowadays found in the market, as a critical innovation for the photovoltaic industry. They integrate some of the most favorable features of the conventional silicon substrates for solar cells, so far, such as the high solar cell efficiency offered by the monocrystalline Czochralski-Si (Cz-Si) wafers and the lower cost, high productivity and full square-shape that characterize the well-known multicrystalline casting growth method. Nevertheless, this innovative crystal growth approach still faces a number of mass scale problems that need to be resolved, in order to gain a deep, 100% reliable and worldwide market: (i) extended defects formation during the growth process; (ii) optimization of the seed recycling; and (iii) parts of the ingots giving low solar cells performance, which directly affect the production costs and yield of this approach. Therefore, this paper presents a series of casting crystal growth experiments and characterization studies from ingots, wafers and cells manufactured in an industrial approach, showing the main sources of crystal defect formation, impurity enrichment and potential consequences at solar cell level. The previously mentioned technological drawbacks are directly addressed, proposing industrial actions to pave the way of this new wafer technology to high efficiency solar cells.

Continuum models of the mechanical behavior of rolled and die-cast magnesium alloys

En los últimos años ha habido una fuerte tendencia a disminuir las emisiones de CO2 y su negativo impacto medioambiental. En la industria del transporte, reducir el peso de los vehículos aparece como la mejor opción para alcanzar este objetivo. Las aleaciones de Mg constituyen un material con gran potencial para el ahorro de peso. Durante la última década se han realizado muchos esfuerzos encaminados a entender los mecanismos de deformación que gobiernan la plasticidad de estos materiales y así, las aleaciones de Mg de colada inyectadas a alta presión y forjadas son todavía objeto de intensas campañas de investigación. Es ahora necesario desarrollar modelos que contemplen la complejidad inherente de los procesos de deformación de éstos. Esta tesis doctoral constituye un intento de entender mejor la relación entre la microestructura y el comportamiento mecánico de aleaciones de Mg, y dará como resultado modelos de policristales capaces de predecir propiedades macro- y microscópicas. La deformación plástica de las aleaciones de Mg está gobernada por una combinación de mecanismos de deformación característicos de la estructura cristalina hexagonal, que incluye el deslizamiento cristalográfico en planos basales, prismáticos y piramidales, así como el maclado. Las aleaciones de Mg de forja presentan texturas fuertes y por tanto los mecanismos de deformación activos dependen de la orientación de la carga aplicada. En este trabajo se ha desarrollado un modelo de plasticidad cristalina por elementos finitos con el objetivo de entender el comportamiento macro- y micromecánico de la aleación de Mg laminada AZ31 (Mg-3wt.%Al-1wt.%Zn). Este modelo, que incorpora el maclado y tiene en cuenta el endurecimiento por deformación debido a las interacciones dislocación-dislocación, dislocación-macla y macla-macla, predice exitosamente las actividades de los distintos mecanismos de deformación y la evolución de la textura con la deformación. Además, se ha llevado a cabo un estudio que combina difracción de electrones retrodispersados en tres dimensiones y modelización para investigar el efecto de los límites de grano en la propagación del maclado en el mismo material. Ambos, experimentos y simulaciones, confirman que el ángulo de desorientación tiene una influencia decisiva en la propagación del maclado. Se ha observado que los efectos no-Schmid, esto es, eventos de deformación plástica que no cumplen la ley de Schmid con respecto a la carga aplicada, no tienen lugar en la vecindad de los límites de baja desorientación y se hacen más frecuentes a medida que la desorientación aumenta. Esta investigación también prueba que la morfología de las maclas está altamente influenciada por su factor de Schmid. Es conocido que los procesos de colada suelen dar lugar a la formación de microestructuras con una microporosidad elevada, lo cuál afecta negativamente a sus propiedades mecánicas. La aplicación de presión hidrostática después de la colada puede reducir la porosidad y mejorar las propiedades aunque es poco conocido su efecto en el tamaño y morfología de los poros. En este trabajo se ha utilizado un enfoque mixto experimentalcomputacional, basado en tomografía de rayos X, análisis de imagen y análisis por elementos finitos, para la determinación de la distribución tridimensional (3D) de la porosidad y de la evolución de ésta con la presión hidrostática en la aleación de Mg AZ91 (Mg- 9wt.%Al-1wt.%Zn) colada por inyección a alta presión. La distribución real de los poros en 3D obtenida por tomografía se utilizó como input para las simulaciones por elementos finitos. Los resultados revelan que la aplicación de presión tiene una influencia significativa tanto en el cambio de volumen como en el cambio de forma de los poros que han sido cuantificados con precisión. Se ha observado que la reducción del tamaño de éstos está íntimamente ligada con su volumen inicial. En conclusión, el modelo de plasticidad cristalina propuesto en este trabajo describe con éxito los mecanismos intrínsecos de la deformación de las aleaciones de Mg a escalas meso- y microscópica. Más especificamente, es capaz de capturar las activadades del deslizamiento cristalográfico y maclado, sus interacciones, así como los efectos en la porosidad derivados de los procesos de colada. ---ABSTRACT--- The last few years have seen a growing effort to reduce CO2 emissions and their negative environmental impact. In the transport industry more specifically, vehicle weight reduction appears as the most straightforward option to achieve this objective. To this end, Mg alloys constitute a significant weight saving material alternative. Many efforts have been devoted over the last decade to understand the main mechanisms governing the plasticity of these materials and, despite being already widely used, high pressure die-casting and wrought Mg alloys are still the subject of intense research campaigns. Developing models that can contemplate the complexity inherent to the deformation of Mg alloys is now timely. This PhD thesis constitutes an attempt to better understand the relationship between the microstructure and the mechanical behavior of Mg alloys, as it will result in the design of polycrystalline models that successfully predict macro- and microscopic properties. Plastic deformation of Mg alloys is driven by a combination of deformation mechanisms specific to their hexagonal crystal structure, namely, basal, prismatic and pyramidal dislocation slip as well as twinning. Wrought Mg alloys present strong textures and thus specific deformation mechanisms are preferentially activated depending on the orientation of the applied load. In this work a crystal plasticity finite element model has been developed in order to understand the macro- and micromechanical behavior of a rolled Mg AZ31 alloy (Mg-3wt.%Al-1wt.%Zn). The model includes twinning and accounts for slip-slip, slip-twin and twin-twin hardening interactions. Upon calibration and validation against experiments, the model successfully predicts the activity of the various deformation mechanisms and the evolution of the texture at different deformation stages. Furthermore, a combined three-dimensional electron backscatter diffraction and modeling approach has been adopted to investigate the effect of grain boundaries on twin propagation in the same material. Both experiments and simulations confirm that the misorientation angle has a critical influence on twin propagation. Non-Schmid effects, i.e. plastic deformation events that do not comply with the Schmid law with respect to the applied stress, are absent in the vicinity of low misorientation boundaries and become more abundant as misorientation angle increases. This research also proves that twin morphology is highly influenced by the Schmid factor. Finally, casting processes usually lead to the formation of significant amounts of gas and shrinkage microporosity, which adversely affect the mechanical properties. The application of hydrostatic pressure after casting can reduce the porosity and improve the properties but little is known about the effects on the casting’s pores size and morphology. In this work, an experimental-computational approach based on X-ray computed tomography, image analysis and finite element analysis is utilized for the determination of the 3D porosity distribution and its evolution with hydrostatic pressure in a high pressure diecast Mg AZ91 alloy (Mg-9wt.%Al-1wt.%Zn). The real 3D pore distribution obtained by tomography is used as input for the finite element simulations using an isotropic hardening law. The model is calibrated and validated against experimental stress-strain curves. The results reveal that the pressure treatment has a significant influence both on the volume and shape changes of individuals pores, which have been precisely quantified, and which are found to be related to the initial pore volume. In conclusion, the crystal plasticity model proposed in this work successfully describes the intrinsic deformation mechanisms of Mg alloys both at the mesoscale and the microscale. More specifically, it can capture slip and twin activities, their interactions, as well as the potential porosity effects arising from casting processes.

Effect of composition, sonication and pressure on the rate capability of 5 V-LiNi0.5Mn1.5O4 composite cathodes

Positive composite electrodes having LiNi0.5Mn1.5O4 spinel as active material, a blend of graphite and carbon black for increasing the electrode electrical conductivity and either polyvinyldenefluoride (PVDF) or a blend of PVDF with a small amount of Teflon® (1 wt%) for building up the electrode. They have been processed by tape casting on an aluminum foil as current collector using the doctor blade technique. Additionally, the component blends were either sonicated or not, and the processed electrodes were compacted or not under subsequent cold pressing. Composites electrodes with high weight, up to 17 mg/cm2, were prepared and studied as positive electrodes for lithium-ion batteries. The addition of Teflon® and the application of the sonication treatment lead to uniform electrodes that are well-adhered to the aluminum foil. Both parameters contribute to improve the capacity drained at high rates (5C). Additional compaction of the electrode/aluminum assemblies remarkably enhances the electrode rate capabilities. At 5C rate, remarkable capacity retentions between 80% and 90% are found for electrodes with weights in the range 3–17 mg/cm2, having Teflon® in their formulation, prepared after sonication of their component blends and compacted under 2 tonnes/cm2.