Nettobudjetoinnin implementointi kunnallisessa yksikössä - Case: Helsingin kaupungin liikuntavirasto

Julkisen sektorin organisaatioita on kritisoitu niiden tehottomuudesta palveluiden tuottajina ja kritiikki on lisännyt keskustelua julkisen ja yksityisen sektorin sopivasta suhteesta. Julkisen sektorin organisaatioissa tilanteeseen on herätty ja toiminnan tehostamiseen on alettu etsiä keinoja. New Public Management:in ja tulosjohtamisen ajatusmaailma ovat ottaneet jalansijaa julkisen sektorin johtamisessa ja samalla tuoneet mukanaan entistä tulospainotteisempaa ajattelutapaa. Helsingin kaupungin liikuntavirastolla siirryttiin bruttobudjetoinnista nettobudjetointiin vuoden 2013 alusta. Budjetointimenetelmän muutoksen taustalla vaikuttaa tavoite viraston toiminnan tehostamisesta. Tutkimus keskittyy selvittämään liikuntaviraston muutosprosessia ja uuden budjetointimenetelmän implementointia. Tutkimuksen tavoitteena on luoda työkalu helpottamaan nettobudjetoinnin implementointia. Tutkimuksen empiirinen aineisto kerättiin puolistrukturoitujen haastattelujen avulla, jotka suoritettiin joulukuun 2012 ja huhtikuun 2013 välillä. Empiiriseen aineistoon ja muutosjohtamisen teoriaan nojaten tutkimuksessa onnistuttiin luomaan liikuntavirastolle muutosprosessin vaihemalli, joka sisältää toimenpide-ehdotuksia muutoksen ja uuden budjetointimenetelmän implementoinnin helpottamiseksi.

The Role of a firm’s mindset in international success - case study of Finnish marine industry firms

This thesis investigates the influence of a firm’s mindset on international success in the context of the Finnish marine industry. The study draws theoretical wisdom from organisational behaviour and strategic management literatures. The research aim set for this study was to identify and categorise existing strategic types based on mindsets found in the marine industry SMEs, and to link the influence of mindsets with success by examining the role of mindsets in a firm’s performance. Mindsets of firms were conceptualised as aggregate collections of perceptions that influence how the surrounding environment is discerned by the members of the firm. Mindsets are idiosyncratic to firms and therefore important firm-specific resources which influence decision-making and can be observed through the strategic behaviour of firms. Qualitative case study method was applied which was further supported by quantitative data on the financial performance of the ten case firms. Taxonomy based on the dimension of mindsets and prediction was developed to demonstrate four ideal types of firms identified within the marine industry. It was found that all of the case firms emphasised adaptation in their strategy while planning was emphasised to a varying degree. Moreover, two different methods of adapting were found; proactive and reactive. Firms which plan in the long-term and adapt proactively constantly investigate whether their plans are synchronous with the realities of the market; by having an open mindset, a firm’s perception of the reality of the market is enabling the firm to develop value creating strategies which are superiorly informed.This finding was supported by the financial data and led to the proposition that having an open mindset and placing a high level of emphasis on prediction may have a positive influence on international success. Also, it was proposed that concentrating only on exploiting business opportunities in the present time and not exploring any addition opportunities can have a negative influence on the firm’s performance, even if the mindset of the firm is open.

Using Moodle to provide added value in the teaching of a software development course

The rate of adoption and use of learning management systems to support teaching and learning processes in academic institutions is growing rapidly. Universities are acquiring systems with functionalities that can match with their specific needs and requirements. Moodle is one of the most popular and widely deployed learning management systems in academic institutions today. However, apart from the system, universities tend to maintain other applications for the purpose of supplementing their teaching and learning processes. This situation is similar to Lappeenranta University of Technology (LUT), which is our case study in this project. Apart from Moodle, the university also maintains other systems such as Oodi, Noppa and Uni portal for the purpose of supporting its educational activities. This thesis has two main goals. The first goal is to understand the specific role of Moodle at LUT. This information is fundamental in assessing whether Moodle is needed in the university’s current teaching and learning environment. The second aim is to provide insights to teachers and other departmental stakeholders on how Moodle can provide added value in the teaching of a software development course. In response to this, a Moodle module for a software development course is created and the underlying features are tested. Results of the constructive work proposed some improvements through (i) the use of Moodle for in-class surveys, (ii) transfer of grades from Moodle to Oodi, (iii) use of Moodle in self-study courses and MOOCs, (iv) online examinations, and (v) Moodle integrations with third party applications. The proposed items were then evaluated for their utility through interviews of five expert interviews. The final results of this work are considered useful to LUT administration and management specifically on ways that Moodle can bring changes to the university at managerial, economical and technical level. It also poses some challenges on platform innovations and research.

Adaptation of TRIZ Method for Problem Solving in Process Engineering

TRIZ is one of the well-known tools, based on analytical methods for creative problem solving. This thesis suggests adapted version of contradiction matrix, a powerful tool of TRIZ and few principles based on concept of original TRIZ. It is believed that the proposed version would aid in problem solving, especially those encountered in chemical process industries with unit operations. In addition, this thesis would help fresh process engineers to recognize importance of various available methods for creative problem solving and learn TRIZ method of creative problem solving. This thesis work mainly provides idea on how to modify TRIZ based method according to ones requirements to fit in particular niche area and solve problems efficiently in creative way. Here in this case, the contradiction matrix developed is based on review of common problems encountered in chemical process industry, particularly in unit operations and resolutions are based on approaches used in past to handle those issues.

Internationalization of small and medium-sized enterprises and impact of institutions on international entrepreneurship in emerging economies: the case of Russia

The doctoral study presents a comprehensive analysis of the impact of the institutional environment on the internationalization-based growth strategic choices of small and mediumsized enterprises (SMEs) in emerging economies. In responding to the calls for more research on institutions and international entrepreneurship, this dissertation extends the linkages between the two to the context of emerging economies. The study presents a comprehensive analysis of institutional challenges and their impact on the internationalization of SMEs in emerging economies, particularly in Russia. The research contributes to the adoption of the institution-based view in international entrepreneurship. The dissertation is presented through five research papers. Based on primary and secondary data, the study categorizes the possible sources of institutional influences on internationalization and empirically tests their impact by applying a method triangulation research design. The result of the conducted research is a proposed theoretical model of the institutional impact on the internationalization of SMEs in emerging economies. The model is specifically focused on the growth stage of the entrepreneurial process and considers only its internationalization facet. The research identifies and provides empirical support for the existence of a positive influence of a transparent and supportive regulatory environment, an institutionalized pool of general business knowledge, and collectivistic value orientation on the proclivity of SMEs to internationalize. A level of appreciation of entrepreneurial initiatives in home country and a greater positive institutional gap provide a positive impact on the international performance of SMEs. The research provides contextualized knowledge of the institutional impact on the internationalization of SMEs in Russia. The obtained results present theoretical value in terms of showing how the environmental conditions effect the entrepreneurial internationalization-based growth in emerging economies, providing the methodological insights into the measurement of the institutional effects, and empirically contextualizing the linkage between institutions and internationalization in the Russian business environment. The research also provides value for the business and policy making stakeholders by identifying ways of utilizing the conditions in the external institutional environment.

Service Blueprinting in Irregularity Service Improvement, case Swissport Finland Ltd

The trend of concentrating to core competencies leads to outsourcing of non-core activities. One such activity is logistics, where the responsibility is given to third-party service providers. This means the service provider acts as an intermediary between the buyer and the end customer. This thesis concentrates on depicting the operational environment of one such service provider, Swissport Finland Ltd, and the improvement of their checked baggage irregularity service. The tools used for this work were service blueprinting, an illustrative method for service mapping, and failure modes and effects analysis. The theoretical part of the thesis offers a framework for using these tools for logistics services, while the empirical part consists of a study mostly qualitative in nature. Action research method was used for the service improvement research. According to the results of this study the combination of service blueprinting and FMEA can be used successfully for irregularity service improvement. The most important result was an enhanced irregularity process that has been found to alleviate earlier problems.

Combining Good Practices : Method to study Introductory Physics in Engineering Education

Julkaisumaa: 056 BE BEL Belgia

Long-term nutrient load management and lake restoration: Case of Säkylän Pyhäjärvi (SW Finland)

Eutrophication caused by anthropogenic nutrient pollution has become one of the most severe threats to water bodies. Nutrients enter water bodies from atmospheric precipitation, industrial and domestic wastewaters and surface runoff from agricultural and forest areas. As point pollution has been significantly reduced in developed countries in recent decades, agricultural non-point sources have been increasingly identified as the largest source of nutrient loading in water bodies. In this study, Lake Säkylän Pyhäjärvi and its catchment are studied as an example of a long-term, voluntary-based, co-operative model of lake and catchment management. Lake Pyhäjärvi is located in the centre of an intensive agricultural area in southwestern Finland. More than 20 professional fishermen operate in the lake area, and the lake is used as a drinking water source and for various recreational activities. Lake Pyhäjärvi is a good example of a large and shallow lake that suffers from eutrophication and is subject to measures to improve this undesired state under changing conditions. Climate change is one of the most important challenges faced by Lake Pyhäjärvi and other water bodies. The results show that climatic variation affects the amounts of runoff and nutrient loading and their timing during the year. The findings from the study area concerning warm winters and their influences on nutrient loading are in accordance with the IPCC scenarios of future climate change. In addition to nutrient reduction measures, the restoration of food chains (biomanipulation) is a key method in water quality management. The food-web structure in Lake Pyhäjärvi has, however, become disturbed due to mild winters, short ice cover and low fish catch. Ice cover that enables winter seining is extremely important to the water quality and ecosystem of Lake Pyhäjärvi, as the vendace stock is one of the key factors affecting the food web and the state of the lake. New methods for the reduction of nutrient loading and the treatment of runoff waters from agriculture, such as sand filters, were tested in field conditions. The results confirm that the filter technique is an applicable method for nutrient reduction, but further development is needed. The ability of sand filters to absorb nutrients can be improved with nutrient binding compounds, such as lime. Long-term hydrological, chemical and biological research and monitoring data on Lake Pyhäjärvi and its catchment provide a basis for water protection measures and improve our understanding of the complicated physical, chemical and biological interactions between the terrestrial and aquatic realms. In addition to measurements carried out in field conditions, Lake Pyhäjärvi and its catchment were studied using various modelling methods. In the calibration and validation of models, long-term and wide-ranging time series data proved to be valuable. Collaboration between researchers, modellers and local water managers further improves the reliability and usefulness of models. Lake Pyhäjärvi and its catchment can also be regarded as a good research laboratory from the point of view of the Baltic Sea. The main problem in both of them is eutrophication caused by excess nutrients, and nutrient loading has to be reduced – especially from agriculture. Mitigation measures are also similar in both cases.

Henkilöstön sitoutuminen muutoksessa - Case: Etelä-Karjalan sosiaali- ja terveyspiiri

Tutkimuksen tarkoituksena oli selvittää, mitkä tekijät vaikuttavat henkilöstön sitoutumiseen muutoksessa. Tutkimuksen teoriaosiossa käsitellään ensiksi muutossitoutumista vahvistavia ja siinä huomioitavia tekijöitä muutosprosessissa onnistuneen muutosjohtamisen kautta, jonka jälkeen syvennytään niihin tekijöihin jotka erityisesti vaikuttavat henkilöstön muutossitoutumiseen. Tutkimuksen empiirisen aineiston muodostivat Etelä-Karjalan sosiaali- ja terveyspiirin ikäihmisten palveluiden kolmentoista henkilön haastattelut. Henkilöistä kymmenen toimi työntekijätehtävissä, kaksi lähiesimiestehtävissä sekä yksi johtoryhmässä. Haastatteluaineisto kerättiin sekä analysoitiin laadullisella tutkimusmenetelmällä. Tutkimustulokset osoittavat, että henkilöstön muutossitoutumiseen vaikuttivat eniten viestintä sekä sen ilmeneminen case-organisaation muutosprosessissa. Kaikki puutteet ja onnistuneisuudet muutosjohtamisessa kiteytyivät viestintään; henkilöstön muutossitoutumisen kannalta erityisesti esimiehen hallitsemaan viestintään ja muutosjohtajuuteen. Muutosviestinnän ollessa onnistunutta se vahvisti selkeästi henkilöstön luottamusta muutosprosessin vaiheissa ja näin lisäsi muutokseen sitoutumista.

The effect of shielding gas feeding method in laser welding of steel

Gas shielding plays an important role in laser welding phenomena. This is because it does not only provide shielding against oxidization but it has an effect in beam absorption and thus welds penetration. The goal of this thesis is to study and compare the effects of different shielding gas feeding methods in laser welding of steel. Research method is a literature survey. It is found that the inclination angle and the arrangement of the gas feeding nozzles affect the phenomena significantly. It is suggested that by designing shielding gas feeding case specifically better welding results can be obtained.

Modulaarisen rakentamisen vaikutus liiketoimintaprosessiin - case kohdeorganisaatio

Backround of this master thesis is previously recognized possibility to build housing units by a new modular building method. This master thesis aims to examine how modular building method influences to business process in the case organization: how will the process change and to whom will the change influence. To examine this, there is a need to declare as-is and to-be processes and find out the changes of the process. Modular building method is a radical change when comparing it to existing. The findings are that modular building method will produce utility by repeating. It needs time and repeating to achieve the utilities. Ability to repeat demands working with more several phases than currently. Modular building method influences also to customer and his/her choices and because of that, it has influences to financial equation.

Young Registered Nurses’ Intent to Leave the Profession in Finland - A Mixed-Method Study

The purpose of this study was to examine and expand understanding concerning young Finnish registered nurses (RN) with an intention to leave the profession and the related variables, specifically when that intention has emerged before the age of 30. The overall goal of the study was to develop a conceptual model in relation to young RNs’ intention to leave the profession. Suggestions for policymakers, nurse leaders and nurse managers are presented for how to retain more young RNs in the nursing workforce. Suggestions for future nursing research are also provided. Phase I consists of two sequential integrative literature reviews of 75 empirical articles concerning nurses’ intention to leave the profession. In phase II, data had been collected as part of the Nurses’ Early Exit (NEXT) study, using the BQ-12 structured postal questionnaire. A total of 147 young RNs participated in the study. The data were analysed with statistical methods. In phase III, firstly, an in-depth interpretive case study was conducted in order to understand how young RNs explain and make sense of their intention to leave the profession. The data in this study consisted of longitudinal career stories by three young RNs. The data was analysed by using narrative holistic-content and thematic methods. Secondly, a total of 15 young RNs were interviewed in order to explore in-depth their experiences concerning organizational turnover and their intent to leave the profession. The data was analysed using conventional content analysis. Based on earlier research, empirical research on the young RNs intention to leave the profession is scarce. Nurses’ intention to leave the profession has mainly been studied with quantitative descriptive studies, conducted with survey questionnaires. Furthermore, the quality of previous studies varies considerably. Moreover, nurses’ intention to leave the profession seems to be driven by a number of variables. According to the survey study, 26% of young RNs had often considered giving up nursing completely and starting a different kind of job during the course of the previous year. Many different variables were associated with an intention to leave the profession (e.g. personal burnout, job dissatisfaction). According to the in-depth inquiries, poor nursing practice environments and a nursing career as a ‘second-best’ or serendipitous career choice were themes associated with young RNs’ intention to leave the profession. In summary, young RNs intention to leave the profession is a complex phenomenon with multiple associated variables. These findings suggest that policymakers, nurse leaders and nurse managers should enable improvements in nursing practice environments in order to retain more young RNs. These improvements can include, for example, adequate staffing levels, balanced nursing workloads, measures to reduce work-related stress as well as possibilities for advancement and development. Young RNs’ requirements to provide high-quality and ethical nursing care must be recognized in society and health-care organizations. Moreover, sufficient mentoring and orientation programmes should be provided for all graduate RNs. Future research is needed into whether the motive for choosing a nursing career affects the length of the tenure in the profession. Both quantitative and in-depth research is needed for the comprehensive development of nursing-turnover research.

Quality, Productivity and Economy in Welding Manufacturing - Case Study: West Africa

This thesis studies quality, productivity and economy in welding manufacturing in West African states such as Ghana, Nigeria and Cameroon. The study consists of two parts: the first part, which forms the theoretical background, reviews relevant literature concerning the metal and welding industries, and measurement of welding quality, productivity and economy. The second part, which is the empirical part, aims to identify activities in the metal manufacturing industries where welding is extensively used and to determine the extent of welding quality, productivity and economy measurements in companies operating in the metal manufacturing industries. Additionally, the thesis aims to identify challenges that companies face and to assess the feasibility of creating a network to address these issues. The research methods used in the empirical part are the case study (qualitative) method and the survey (quantitative) method. However, the case study method was used to elicit information from companies in Ghana, while the survey method was used to elicit information from companies in Nigeria and Cameroon. The study considers important areas that contribute to creating awareness and understanding of the current situation of the welding industry in West Africa. These areas include the metal manufacturing industrial sector, metal products manufactured, metal production and manufacturing systems deployed, welding quality, productivity and economy measurement systems utilized, equipment and materials on the markets, general challenges facing companies in welding operations, welding technology programs and research in local universities, and SWOT analysis of the various West African states. The notable findings indicate that majority of the companies operate in the constructionindustrial sector. Also, majority of the companies are project manufacturing oriented, thus provide services to customers operating in the growing industries such as the oil and gas, mining, food and the energy industry. In addition, only few companies are certified under standards such as ISO 9001, ISO 3834, and OHSAS 18001. More so, majority of the companies employ manual welding technique, and shielded metal arc welding (SMAW) as the commonly used welding process. Finally, welder salary is about € 300 / month as of June 2013 and the average operations turnover of medium to large companies is about € 5 million / year as at 2012. Based on analysis of the results of the study, it is noted that while welding activities are growing, the availability of cheap labor, the need for company and welder qualification and certification, and the need to manufacture innovative products through developmental projects (transfer of welding expertise and technology) remain as untapped opportunities in the welding industry in the West African states. The study serves as a solid platform for further research and concludes with several recommendations for development of the West African welding industry.

Customer knowledge processing in maintenance business: case study

The purpose of the study is to examine and increase knowledge on customer knowledge processing in B2B context from sales perspective. Further objectives include identifying possible inhibiting and enabling factors in each phase of the process. The theoretical framework is based on customer knowledge management literature. The study is a qualitative study, in which the research method utilized is a case study. The empirical part was implemented in a case company by conducting in-depth interviews with the company’s value-selling champions located internationally. Context was maintenance business. Altogether 17 interviews were conducted. The empirical findings indicate that customer knowledge processing has not been clearly defined within the maintenance business line. Main inhibiting factors in acquiring customer knowledge are lack of time and vast amount of customer knowledge received. Enabling factors recognized are good customer relationships and sales representatives’ communication skills. Internal dissemination of knowledge is mainly inhibited by lack of time and restrictions in customer relationship management systems. Enabling factors are composition of the sales team and updated customer knowledge. Inhibiting utilization is lack of goals to utilize the customer knowledge and a low quality of the knowledge. Moreover, customer knowledge is not systematically updated nor analysed. Management of customer knowledge is based on the CRM system. As implications of the study, it is suggested for the case company to define customer knowledge processing in order to support maintenance business process.

Process modeling method for electric accessories manufacturing enterprise

The theoretical research of the study focused to business process management and business process modeling, the goal was to found a new business process modeling method for electrical accessories manufacturing enterprise. The focus was to find few options for business process modeling methods where company could have chosen the best one for its needs The study was carried out as a qualitative research with an action study and a case study as the most important ways collect data. In the empirical part of the study examples of company’s processes modeled with the new modeling method and process modeling process are presented. The new way of modeling processes improves especially visual presentation of the processes and improves the understanding how employees should work in the organizational interfaces of the process and in the interfaces between different processes. The results of the study is a new unified way to model company’s processes, which makes it easier to understand and create the process models. This improved readability makes it possible to reduce the costs that were created from the unclear old process models.