Fault-tolerant aspects of MPC

The architecture of model predictive control (MPC), with its explicit internal model and constrained optimization is presented. Since MPC relies on an explicit internal model, one can imagine dealing with failures by updating the internal model, and letting the on-line optimizer work out how to control the system in its new condition. This aspects rely on assumptions such that the nature of the fault can be located, and the model can be updated automatically. A standard form of MPC, with linear inequality constraints on inputs and outputs, linear internal model, and quadriatic cost function.

Numerical simulation of the growth of ZnO nanostructures in a tube furnace by physical vapour deposition

Zinc oxide is a versatile II-VI naturally n-type semiconductor that exhibits piezoelectric properties. By controlling the growth kinetics during a simple carbothermal reduction process a wide range of 1D nanostructures such as nanowires, nanobelts, and nanotetrapods have been synthesized. The driving force: for the nanostructure growth is the Zn vapour supersaturation and supply rate which, if known, can be used to predict and explain the type of crystal structure that results. A model which attempts to determine the Zn vapour concentration as a function of position in the growth furnace is described. A numerical simulation package, COMSOL, was used to simultaneously model the effects of fluid flow, diffusion and heat transfer in a tube furnace made specifically for ZnO nanostructure growth. Parameters such as the temperature, pressure, and flow rate are used as inputs to the model to show the effect that each one has on the Zn concentration profile. An experimental parametric study of ZnO nanostructure growth was also conducted and compared to the model predictions for the Zn concentration in the tube. © 2008 Materials Research Society.

Resource productivity and economic performance of producing fish seeds in government and private fanns in Bangladesh

The effect of various factors on spawn and fingerlings production in government and private farms was measured in this study. Primary data were collected from 45 private and 11 government farms from 9 selected districts covering major fish seed producing areas of Bangladesh. Results from Cobb-Douglas production function analysis indicated that the included variables had some positive impacts on returns from spawn and fingerlings. No input was found to be over used and increasing returns to scale was observed. Tabular analysis indicated that higher amount of input use produced higher level of yield, gross return and net return. The government farms were under utilized. For increased supply of fish seeds in the country more amount of specified inputs (feed and fertilizer) should be used for producing spawn and fingerlings especially in government farms.

Economics of pond fish culture in some selected areas of Bangladesh

A simple costs and return analysis was done to determine the profitability of pond fish culture in three selected thanas namely Nertakona Sadar, Purbadhala and Kendua under Netrakona district. Cobb-douglas production function model was used to estimate the contribution of key variables to the production process of pond fish culture. It was found that cost of pond fish production was Tk. 10,103/ha/yr and the per hectare fish yield was 943 kgl/yr and the average gross and net return were Tk. 49,515 and Tk. 39,412 respectively. It was found that medium and small farms had the higher yield because of efficient use of production inputs compared to large farms. It was also observed that ownership of pond, number of species and human labour had negative impact on pond fish output, while depth of pond water, farm size, fish seed, fertilizer and artificial feed had significant positive effects on pond fish output.

Investment in fish seed multiplication farms in Bangladesh: Evidences of an attractive business

This study mainly evaluated the profitability of Fish Seed Multiplication Farms (FSMFs) having hatchery, nursery and hatchery-cum-nursery located in the districts of Jessore, Jhenidah and Narail in Bangladesh. The general findings of the study were that the investment in FSMFs with hatchery, nursery and hatchery-cum-nursery was highly profitable business. The results clearly indicated that the investment on hatchery was the most profitable than those of nursery and hatchery-cum-nursery operations from the viewpoints of individual investors. The results of sensitivity analysis suggested that the investment in nursery farm was a risky business with 20 per cent increase in operation and management as well was production costs or 20 per cent reduction in benefits if other things remaining the same. It was also evident from the study that the investors of FSMFs had currently been facing some crucial problems, which among others are: problems of inbreeding, shortage of brood fish, incidence of diseases, unavailability of certain inputs and lack of credit.

Economics of pond fish culture under BRAC supervision in Mymensingh, Bangladesh

This study examines the relative profitability of pond aquaculture (polyculture and monoculture of silver barb) under BRAC supervision in Trishal Upazila, Mymensingh district in Bangladesh. The results of the study showed that polyculture was economically more rewarding than monoculture, though both the farming activities were profitable. Production function analysis proved that inputs such as fingerlings, fertilizer, feed and manure had positive impact on output. Human labor and insecticides were over used. The coefficients had expected signs and were found to be very significant.

Economic analysis of carp based culture technologies in selected areas of Bangladesh

Six carp based culture technologies such as, carp-pangas, carp polyculture, carp-golda, pangas monoculture, golda monoculture and nursery have been selected to determine the cost and returns of respective technologies in Bangladesh. The sample farmers selected for these technologies were 55, 100, 65, 50, 51 and 55 respectively and thus the total sample size stood at 376. The study covered 7 districts of Bangladesh, namely, Mymensingh, Bogra, Noakhali, Comilla, Jessore, Khulna and Bagerhat. Both primary and secondary data were used for this study. It was found that farmers used a good number of feeds for the selected technologies and they maintained no standard doses for them. Remarkable differences were found among the prices of different feeds and other inputs used for different technologies in different locations. Prices of all inputs were found to be increasing and this increase was more in recent years compared to previous years. Though all the technologies were found to be profitable, the feed situation was not satisfactory. Except rice polish all the local feeds showed deficit in supply to meet the national demand for the country. If this situation persists and no proper measures are taken to secure the local feed supply, the present development of supplementary feed-based aquaculture would be fully dependent on imported feeds and would not be sustainable in future. This study strongly suggests the corresponding authority to handle the matter with proper attention considering its significant livelihood impact on the economy of the country.

Input-output relationship and economics of pangas monoculture and carp-pangas polyculture in two districts of Bangladesh

An attempt was made to study the input-output relationships and economics of pangas monoculture and carp-pangas polyculture in Bangladesh. By analyzing the data collected from 50 pangas farms and 55 carp-pangas farms, the study has investigated the production systems of two technologies and the effects of fingerling stocking and applications of feed and fertilizer on fisheries income. The data were collected from the fishermen of Trishal and Bhaluka of Mymensingh district, and Kahaloo and Adamdighee of Bogra district during 2001-02. For pangas monoculture, the stocking density was 31,561 per ha while it was 55,017 per ha in carp-pangas polyculture. Most of the farmers used urea, TSP and lime before stocking. Rice and wheat bran happened to be the most common feed ingredients for both types of culture in general. Other important ingredients used were mustard oil-cakes, rice polish, wheat flour, fish meal, bone meal, soybean meal and poultry litter. In terms of quantities, rice bran and wheat bran dominated the farmers list. Rice and wheat bran together constituted about 60% of all studied feeds. Feed cost constituted 59.13% of total costs for pangas monoculture and 67.44% for carp-pangas polyculture. Per ha productions of pangas and carp-pangas in a single culture cycle were 15,508 kg and 19,745 kg, respectively. Per ha gross profits were estimated to be Tk 310,311 and Tk 464,418 for pangas monoculture and carp-pangas polyculture, respectively. Net profit appeared to be Tk 264,216 per ha for pangas monoculture and Tk 416,509 per ha for carp-pangas polyculture. The BCRs calculated were 1.46 and 1.68 for monoculture and polyculture, respectively. The break-even costs per kg of fish were estimated at Tk 36.93 for pangas and Tk 30.93 for mixed species which was much lower than the prices the producers received. Break-even productions were estimated at 10,702 kg per ha for pangas monoculture and 11,784 kg per ha for carp-pangas polyculture. Fingerling and feed cost, and pond size significantly explained the variation of income from pangas monoculture. These factors have significantly influenced the income from the crop. Functional analysis shows that 1% increase in the feed cost might increase 0.51% of pangas income and 0.41% in carp-pangas income. No other inputs had shown this much of responses to increasing income from a fish.

Factors affecting the adoption of carp polyculture in Bangladesh

A study was conducted to determine the factors affecting adoption of pond polyculture in six villages of three districts namely Mymensingh, Bogra and Narshingdi in Bangladesh. In Mymensingh, 75% pond owners adopted carp polyculture technology whereas in Bogra and Narshingdi only 16% and 25% pond owners, respectively adopted this technology for fish production. The production of fish per unit area was found to be 5 to 10 times higher in Mymensingh compared to that of Bogra and Narshingdi. Fish farmers identified three main problems affecting the adoption of pond polyculture viz. lack of input used in aquaculture, low fish yield and lack of credit facilities for pond polyculture. The technological awareness of the farmers directly contributed towards use of inputs in culture ponds. The positive impact of technological dissemination found on input use, fish yield and uplifted socioeconomic condition.

Stress-facilitated LTD induces output plasticity through a synchronized-spikes and spontaneous unitary discharges the CA1 region of the hippocampus

Long-term potentiation (LTP) and long-term depression (LTD) of the excitatory synaptic inputs plasticity in the hippocampus is believed to underlie certain types of learning and memory. Especially, stressful experiences, well known to produce long-lasting strong memories of the event themselves, enable LTD by low frequency stimulation (LFS, 3 Hz) but block LTP induction by high frequency stimulation (HFS, 200 Hz). However, it is unknown whether stress-affected synaptic plasticity has an impact on the output plasticity. Thus, we have simultaneously studied the effects of stress on synaptic plasticity and neuronal output in the hippocampal CA1 region of anesthetized Wistar rats. Our results revealed that stress increased basal power spectrum of the evoked synchronized-spikes and enabled LTD induction by LFS. The induction of stress-facilitated LTD but not LFS induced persistent decreases of the power spectrum of the synchronized-spikes and the frequency of the spontaneous unitary discharges; However, HFS induced UP in non-stressed animals and increased the power spectrum of the synchronized-spikes, without affecting the frequency of the spontaneous unitary discharges, but HFS failed to induce UP in stressed animals without affecting the power spectrum of the synchronized-spikes and the frequency of the spontaneous unitary discharges. These observations that stress-facilitated LTD induces the output plasticity through the synchronized-spikes and spontaneous unitary discharges suggest that these types of stress-related plasticity may play significant roles in distribution, amplification and integration of encoded information to other brain structures under stressful conditions. (C) 2004 Elsevier Ireland Ltd and The Japan Neuroscience Society. All rights reserved.

Understanding nutrient loading and sources in the Bay of Bengal Large Marine Ecosystem

Inputs of nitrogen, phosphorous and dissolved silica from watersheds draining into the Bay of Bengal Large Marine Ecosystem are calculated for the present day and predictions made for 2030 and 2050 are presented. The major sources are identified and the Indicator of Coastal Eutrophication (ICEP) is calculated.

Report of the SocMon capacity development workshop for the Bay of Bengal Large Marine Ecosystem countries in South Asia, St Martin's Island, Bangladesh, 2-11 January, 2015

Socio-economic Monitoring (SocMon) is an approach and set of tools for conducting socio-economic monitoring of changes in coastal communities. Planned outputs of the workshop included: training of local staff i SocMon methodologies; draft a SocMon report for St. Martin's Island; a workplan for implementing the SocMon; a communication strategy; and key inputs to a regional SocMon strategy

Report of the SocMon capacity development workshop for the Bay of Bengal Large Marine Ecosystem countries in South Asia, Vidathaltivu, Northern Province, Sri Lanka, 3-11 March, 2015

This Socioeconomic Monitoring (SocMon) training workshop was coordinated by the Small Fisher Federation of Lanka (SFFL). Planned outputs included: participants from Mannar trained in SocMon methodologies; draft SocMon reports fro Vidathaltivu; a workplan for Mannar; a communication strategy for Vidathaltivu/ Mannar; and key inputs to a regional SocMon strategy

Strengthening the log book recording system for fishing vessels: Sri Lanka

Activities of the project included: preparation of awareness materials on data reporting; organizing stakeholder awareness programmes; setting and maintaining an electronic database; inputs from participants and recommendations

An approach to functional synthesis of solutions in mechanical conceptual design. Part III: Spatial configuration

These three papers describe an approach to the synthesis of solutions to a class of mechanical design problems; these involve transmission and transformation of mechanical forces and motion, and can be described by a set of inputs and outputs. The approach involves (1) identifying a set of primary functional elements and rules of combining them, and (2) developing appropriate representations and reasoning procedures for synthesising solution concepts using these elements and their combination rules; these synthesis procedures can produce an exhaustive set of solution concepts, in terms of their topological as well as spatial configurations, to a given design problem. This paper (Part III) describes a constraint propagation procedure which, using a knowledge base of spatial information about a set of primary functional elements, can produce possible spatial configurations of solution concepts generated in Part II.